Ender 3 Pro w/ Creality V4.2.7 Board Configuration
This commit is contained in:
Sravan Balaji
@@ -21,6 +21,8 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "config/examples/Creality/Ender-3 Pro/CrealityV427"
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
@@ -61,7 +63,7 @@
|
||||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "(Dust, Ender-3 Pro)" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
@@ -79,16 +81,16 @@
|
||||
#define SHOW_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
#define SHOW_CUSTOM_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
|
||||
// @section machine
|
||||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_CREALITY_V427
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -99,7 +101,7 @@
|
||||
*
|
||||
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
|
||||
*/
|
||||
#define SERIAL_PORT 0
|
||||
#define SERIAL_PORT 1
|
||||
|
||||
/**
|
||||
* Serial Port Baud Rate
|
||||
@@ -112,7 +114,7 @@
|
||||
*
|
||||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
#define BAUDRATE 115200
|
||||
|
||||
// #define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
|
||||
|
||||
@@ -136,7 +138,7 @@
|
||||
// #define BLUETOOTH
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "Ender-3 Pro 4.2.7"
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
@@ -159,9 +161,9 @@
|
||||
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
|
||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
|
||||
*/
|
||||
#define X_DRIVER_TYPE A4988
|
||||
#define Y_DRIVER_TYPE A4988
|
||||
#define Z_DRIVER_TYPE A4988
|
||||
#define X_DRIVER_TYPE TMC2208_STANDALONE
|
||||
#define Y_DRIVER_TYPE TMC2208_STANDALONE
|
||||
#define Z_DRIVER_TYPE TMC2208_STANDALONE
|
||||
// #define X2_DRIVER_TYPE A4988
|
||||
// #define Y2_DRIVER_TYPE A4988
|
||||
// #define Z2_DRIVER_TYPE A4988
|
||||
@@ -173,7 +175,7 @@
|
||||
// #define U_DRIVER_TYPE A4988
|
||||
// #define V_DRIVER_TYPE A4988
|
||||
// #define W_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE TMC2208_STANDALONE
|
||||
// #define E1_DRIVER_TYPE A4988
|
||||
// #define E2_DRIVER_TYPE A4988
|
||||
// #define E3_DRIVER_TYPE A4988
|
||||
@@ -640,7 +642,7 @@
|
||||
#define HEATER_5_MAXTEMP 275
|
||||
#define HEATER_6_MAXTEMP 275
|
||||
#define HEATER_7_MAXTEMP 275
|
||||
#define BED_MAXTEMP 150
|
||||
#define BED_MAXTEMP 125
|
||||
#define CHAMBER_MAXTEMP 60
|
||||
|
||||
/**
|
||||
@@ -677,16 +679,17 @@
|
||||
// #define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
|
||||
// Set/get with G-code: M301 E[extruder number, 0-2]
|
||||
|
||||
// Creality Ender-3
|
||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||
// Specify up to one value per hotend here, according to your setup.
|
||||
// If there are fewer values, the last one applies to the remaining hotends.
|
||||
#define DEFAULT_Kp_LIST { 22.20, 22.20 }
|
||||
#define DEFAULT_Ki_LIST { 1.08, 1.08 }
|
||||
#define DEFAULT_Kd_LIST { 114.00, 114.00 }
|
||||
#define DEFAULT_Kp_LIST {21.73, 21.73}
|
||||
#define DEFAULT_Ki_LIST {1.54, 1.54}
|
||||
#define DEFAULT_Kd_LIST {76.55, 76.55}
|
||||
#else
|
||||
#define DEFAULT_Kp 22.20
|
||||
#define DEFAULT_Ki 1.08
|
||||
#define DEFAULT_Kd 114.00
|
||||
#define DEFAULT_Kp 21.73
|
||||
#define DEFAULT_Ki 1.54
|
||||
#define DEFAULT_Kd 76.55
|
||||
#endif
|
||||
#else
|
||||
#define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current
|
||||
@@ -833,8 +836,8 @@
|
||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
|
||||
|
||||
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
|
||||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
|
||||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
@@ -1196,14 +1199,14 @@
|
||||
* Override with M92
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 93}
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (linear=mm/s, rotational=°/s)
|
||||
* Override with M203
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25}
|
||||
|
||||
// #define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
@@ -1216,7 +1219,7 @@
|
||||
* Override with M201
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION {500, 500, 100, 5000}
|
||||
|
||||
// #define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
@@ -1231,9 +1234,9 @@
|
||||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk limits (mm/s)
|
||||
@@ -1273,7 +1276,7 @@
|
||||
* https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
|
||||
*/
|
||||
#if DISABLED(CLASSIC_JERK)
|
||||
#define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
|
||||
#define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge
|
||||
#define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
|
||||
// for small segments (< 1mm) with large junction angles (> 135°).
|
||||
#endif
|
||||
@@ -1302,10 +1305,10 @@
|
||||
* The probe replaces the Z-MIN endstop and is used for Z homing.
|
||||
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
|
||||
*/
|
||||
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
// #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
|
||||
// Force the use of the probe for Z-axis homing
|
||||
//#define USE_PROBE_FOR_Z_HOMING
|
||||
#define USE_PROBE_FOR_Z_HOMING
|
||||
|
||||
/**
|
||||
* Z_MIN_PROBE_PIN
|
||||
@@ -1359,7 +1362,7 @@
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
*/
|
||||
//#define BLTOUCH
|
||||
#define BLTOUCH
|
||||
|
||||
/**
|
||||
* MagLev V4 probe by MDD
|
||||
@@ -1412,16 +1415,46 @@
|
||||
#define PROBE_DEPLOY_FEEDRATE (133 * 60) // (mm/min) Probe deploy speed
|
||||
#define PROBE_STOW_FEEDRATE (133 * 60) // (mm/min) Probe stow speed
|
||||
|
||||
#define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } } // Move to side Dock & Attach probe
|
||||
#define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } } // Move probe off dock
|
||||
#define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
|
||||
#define MAG_MOUNTED_DEPLOY_4 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
|
||||
#define MAG_MOUNTED_DEPLOY_5 { PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
|
||||
#define MAG_MOUNTED_STOW_1 { PROBE_STOW_FEEDRATE, { 245, 114, 20 } } // Move to dock
|
||||
#define MAG_MOUNTED_STOW_2 { PROBE_STOW_FEEDRATE, { 245, 114, 0 } } // Place probe beside remover
|
||||
#define MAG_MOUNTED_STOW_3 { PROBE_STOW_FEEDRATE, { 230, 114, 0 } } // Side move to remove probe
|
||||
#define MAG_MOUNTED_STOW_4 { PROBE_STOW_FEEDRATE, { 210, 114, 20 } } // Side move to remove probe
|
||||
#define MAG_MOUNTED_STOW_5 { PROBE_STOW_FEEDRATE, { 0, 0, 0 } } // Extra move if needed
|
||||
#define MAG_MOUNTED_DEPLOY_1 \
|
||||
{ \
|
||||
PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } \
|
||||
} // Move to side Dock & Attach probe
|
||||
#define MAG_MOUNTED_DEPLOY_2 \
|
||||
{ \
|
||||
PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } \
|
||||
} // Move probe off dock
|
||||
#define MAG_MOUNTED_DEPLOY_3 \
|
||||
{ \
|
||||
PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } \
|
||||
} // Extra move if needed
|
||||
#define MAG_MOUNTED_DEPLOY_4 \
|
||||
{ \
|
||||
PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } \
|
||||
} // Extra move if needed
|
||||
#define MAG_MOUNTED_DEPLOY_5 \
|
||||
{ \
|
||||
PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } \
|
||||
} // Extra move if needed
|
||||
#define MAG_MOUNTED_STOW_1 \
|
||||
{ \
|
||||
PROBE_STOW_FEEDRATE, { 245, 114, 20 } \
|
||||
} // Move to dock
|
||||
#define MAG_MOUNTED_STOW_2 \
|
||||
{ \
|
||||
PROBE_STOW_FEEDRATE, { 245, 114, 0 } \
|
||||
} // Place probe beside remover
|
||||
#define MAG_MOUNTED_STOW_3 \
|
||||
{ \
|
||||
PROBE_STOW_FEEDRATE, { 230, 114, 0 } \
|
||||
} // Side move to remove probe
|
||||
#define MAG_MOUNTED_STOW_4 \
|
||||
{ \
|
||||
PROBE_STOW_FEEDRATE, { 210, 114, 20 } \
|
||||
} // Side move to remove probe
|
||||
#define MAG_MOUNTED_STOW_5 \
|
||||
{ \
|
||||
PROBE_STOW_FEEDRATE, { 0, 0, 0 } \
|
||||
} // Extra move if needed
|
||||
#endif
|
||||
|
||||
// Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector
|
||||
@@ -1511,7 +1544,7 @@
|
||||
* | [-] |
|
||||
* O-- FRONT --+
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -46.63, -5.12, 0 }
|
||||
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
@@ -1663,14 +1696,14 @@
|
||||
// @section extruder
|
||||
|
||||
// #define DISABLE_E // Disable the extruder when not stepping
|
||||
#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
|
||||
// #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
|
||||
|
||||
// @section motion
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR false
|
||||
#define INVERT_Y_DIR false
|
||||
#define INVERT_Z_DIR true
|
||||
// #define INVERT_I_DIR false
|
||||
// #define INVERT_J_DIR false
|
||||
// #define INVERT_K_DIR false
|
||||
@@ -1722,8 +1755,8 @@
|
||||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 235
|
||||
#define Y_BED_SIZE 235
|
||||
|
||||
// Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
@@ -1731,7 +1764,7 @@
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define Z_MAX_POS 250
|
||||
// #define I_MIN_POS 0
|
||||
// #define I_MAX_POS 50
|
||||
// #define J_MIN_POS 0
|
||||
@@ -1901,7 +1934,7 @@
|
||||
*/
|
||||
// #define AUTO_BED_LEVELING_3POINT
|
||||
// #define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
#define AUTO_BED_LEVELING_BILINEAR
|
||||
// #define AUTO_BED_LEVELING_UBL
|
||||
// #define MESH_BED_LEVELING
|
||||
|
||||
@@ -1987,7 +2020,7 @@
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
@@ -2118,7 +2151,7 @@
|
||||
* - Allows Z homing only when XY positions are known and trusted.
|
||||
* - If stepper drivers sleep, XY homing may be required again before Z homing.
|
||||
*/
|
||||
//#define Z_SAFE_HOMING
|
||||
#define Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing
|
||||
@@ -2126,7 +2159,7 @@
|
||||
#endif
|
||||
|
||||
// Homing speeds (linear=mm/min, rotational=°/min)
|
||||
#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
|
||||
#define HOMING_FEEDRATE_MM_M {(20 * 60), (20 * 60), (4 * 60)}
|
||||
|
||||
// Validate that endstops are triggered on homing moves
|
||||
#define VALIDATE_HOMING_ENDSTOPS
|
||||
@@ -2204,7 +2237,7 @@
|
||||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
// #define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
@@ -2243,16 +2276,16 @@
|
||||
// Preheat Constants - Up to 10 are supported without changes
|
||||
//
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_BED 70
|
||||
#define PREHEAT_1_TEMP_HOTEND 185
|
||||
#define PREHEAT_1_TEMP_BED 45
|
||||
#define PREHEAT_1_TEMP_CHAMBER 35
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_LABEL "ABS"
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_TEMP_BED 70
|
||||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
|
||||
|
||||
// @section motion
|
||||
|
||||
@@ -2488,7 +2521,7 @@
|
||||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
@@ -2577,7 +2610,7 @@
|
||||
// If you have a speaker that can produce tones, enable it here.
|
||||
// By default Marlin assumes you have a buzzer with a fixed frequency.
|
||||
//
|
||||
//#define SPEAKER
|
||||
#define SPEAKER
|
||||
|
||||
//
|
||||
// The duration and frequency for the UI feedback sound.
|
||||
@@ -2866,7 +2899,10 @@
|
||||
//
|
||||
// Connect to EXP1 on RAMPS and compatible boards.
|
||||
//
|
||||
//#define CR10_STOCKDISPLAY
|
||||
#define CR10_STOCKDISPLAY
|
||||
#if ENABLED(CR10_STOCKDISPLAY)
|
||||
#define RET6_12864_LCD // Specific to the SoC (can either be RET / VET)
|
||||
#endif
|
||||
|
||||
//
|
||||
// Ender-2 OEM display, a variant of the MKS_MINI_12864
|
||||
@@ -3255,7 +3291,7 @@
|
||||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||
//#define FAN_SOFT_PWM
|
||||
#define FAN_SOFT_PWM
|
||||
|
||||
// Incrementing this by 1 will double the software PWM frequency,
|
||||
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
|
||||
|
||||
@@ -21,6 +21,8 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "config/examples/Creality/Ender-3 Pro/CrealityV427"
|
||||
|
||||
/**
|
||||
* Configuration_adv.h
|
||||
*
|
||||
@@ -885,7 +887,7 @@
|
||||
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after homing
|
||||
//#define XY_COUNTERPART_BACKOFF_MM 0 // (mm) Backoff X after homing Y, and vice-versa
|
||||
|
||||
//#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
// #define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
|
||||
// #define HOME_Z_FIRST // Home Z first. Requires a real endstop (not a probe).
|
||||
// #define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first
|
||||
@@ -959,7 +961,6 @@
|
||||
*/
|
||||
// #define BLTOUCH_HS_MODE true
|
||||
|
||||
|
||||
#endif // BLTOUCH
|
||||
|
||||
// @section calibration
|
||||
@@ -1034,7 +1035,10 @@
|
||||
#if ENABLED(ASSISTED_TRAMMING)
|
||||
|
||||
// Define from 3 to 9 points to probe.
|
||||
#define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } }
|
||||
#define TRAMMING_POINT_XY \
|
||||
{ \
|
||||
{20, 20}, {180, 20}, {180, 180}, { 20, 180 } \
|
||||
}
|
||||
|
||||
// Define position names for probe points.
|
||||
#define TRAMMING_POINT_NAME_1 "Front-Left"
|
||||
@@ -1378,7 +1382,7 @@
|
||||
// #define LCD_BACKLIGHT_TIMEOUT_MINS 1 // (minutes) Timeout before turning off the backlight
|
||||
|
||||
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
|
||||
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
|
||||
#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
|
||||
#if ENABLED(PROBE_OFFSET_WIZARD)
|
||||
/**
|
||||
* Enable to init the Probe Z-Offset when starting the Wizard.
|
||||
@@ -1414,7 +1418,7 @@
|
||||
#endif
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
#define LCD_INFO_MENU
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
// #define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
|
||||
#endif
|
||||
@@ -1444,7 +1448,7 @@
|
||||
#endif
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// Apply a timeout to low-priority status messages
|
||||
// #define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
|
||||
@@ -1639,7 +1643,7 @@
|
||||
// #define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
|
||||
// #define M20_TIMESTAMP_SUPPORT // Include timestamps by adding the 'T' flag to M20 commands
|
||||
|
||||
//#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
|
||||
#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
|
||||
|
||||
// #define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!)
|
||||
|
||||
@@ -2063,7 +2067,7 @@
|
||||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
// #define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
// #define BABYSTEP_WITHOUT_HOMING
|
||||
@@ -2074,7 +2078,7 @@
|
||||
#define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
|
||||
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
|
||||
|
||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
|
||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||
// Note: Extra time may be added to mitigate controller latency.
|
||||
@@ -2731,7 +2735,7 @@
|
||||
#define INTERPOLATE true
|
||||
|
||||
#if AXIS_IS_TMC_CONFIG(X)
|
||||
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
|
||||
#define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
|
||||
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
|
||||
#define X_MICROSTEPS 16 // 0..256
|
||||
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X
|
||||
@@ -2751,7 +2755,7 @@
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC_CONFIG(Y)
|
||||
#define Y_CURRENT 800
|
||||
#define Y_CURRENT 580
|
||||
#define Y_CURRENT_HOME Y_CURRENT
|
||||
#define Y_MICROSTEPS 16
|
||||
#define Y_RSENSE 0.11
|
||||
@@ -2771,7 +2775,7 @@
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC_CONFIG(Z)
|
||||
#define Z_CURRENT 800
|
||||
#define Z_CURRENT 580
|
||||
#define Z_CURRENT_HOME Z_CURRENT
|
||||
#define Z_MICROSTEPS 16
|
||||
#define Z_RSENSE 0.11
|
||||
@@ -2871,7 +2875,7 @@
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC_CONFIG(E0)
|
||||
#define E0_CURRENT 800
|
||||
#define E0_CURRENT 650
|
||||
#define E0_MICROSTEPS 16
|
||||
#define E0_RSENSE 0.11
|
||||
#define E0_CHAIN_POS -1
|
||||
@@ -3062,7 +3066,7 @@
|
||||
* Define your own with:
|
||||
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
|
||||
*/
|
||||
#define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below)
|
||||
#define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below)
|
||||
// #define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below)
|
||||
// #define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
|
||||
// #define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below)
|
||||
@@ -3225,7 +3229,9 @@
|
||||
* stepperY.intpol(0); \
|
||||
* }
|
||||
*/
|
||||
#define TMC_ADV() { }
|
||||
#define TMC_ADV() \
|
||||
{ \
|
||||
}
|
||||
|
||||
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
|
||||
|
||||
|
||||
97
Marlin/_Bootscreen.h
Normal file
97
Marlin/_Bootscreen.h
Normal file
@@ -0,0 +1,97 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Boot Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
|
||||
#define CUSTOM_BOOTSCREEN_INVERTED
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
|
||||
B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
|
||||
B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
|
||||
B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
|
||||
B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
|
||||
B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
|
||||
B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
|
||||
B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
|
||||
B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
|
||||
B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
|
||||
B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
|
||||
B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
|
||||
B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
|
||||
B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
|
||||
B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
|
||||
B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
|
||||
};
|
||||
71
Marlin/_Statusscreen.h
Normal file
71
Marlin/_Statusscreen.h
Normal file
@@ -0,0 +1,71 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* https://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 39
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B11111000,B00000001,B10000000,B00000000,B00001100,
|
||||
B01001000,B00000000,B10000000,B00000000,B00010010,
|
||||
B01000011,B11000011,B10001100,B11010000,B00000010,
|
||||
B01110001,B00100100,B10010010,B01100111,B11001100,
|
||||
B01000001,B00100100,B10011110,B01000000,B00000010,
|
||||
B01001001,B00100100,B10010000,B01000000,B00010010,
|
||||
B11111011,B10110011,B11001110,B11100000,B00001100,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00000011,B10000000,B00000000,B00000000,
|
||||
B00000000,B00000010,B01000000,B00000000,B00000000,
|
||||
B00000000,B00000010,B01010110,B01100000,B00000000,
|
||||
B00000000,B00000011,B10011000,B10010000,B00000000,
|
||||
B00000000,B00000010,B00010000,B10010000,B00000000,
|
||||
B00000000,B00000010,B00010000,B10010000,B00000000,
|
||||
B00000000,B00000010,B00010000,B01100000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
Reference in New Issue
Block a user