sravan/Marlin-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

✨ M282 - Detach Servo (#22760)

Browse Source
This commit is contained in:
Dakkaron
2021-09-15 02:00:48 +02:00
committed by Scott Lahteine
parent 224371dfc6
commit 1386e78369
11 changed files with 76 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
Marlin/Configuration.h
View File

@@ -2936,9 +2936,9 @@
* Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support.
*/
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
//#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay.
// If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 }
@@ -2948,3 +2948,6 @@
// Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE