Merge pull request #9183 from thinkyhead/bf1_new_flsun_config

[1.1.x] Add FLSUN Kossel configuration

Marlin/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/configuration_store.cpp

@@ -71,6 +71,8 @@
   #include "fwretract.h"
 #endif
 
+#pragma pack(push, 1) // No padding between variables
+
 typedef struct PID { float Kp, Ki, Kd; } PID;
 typedef struct PIDC { float Kp, Ki, Kd, Kc; } PIDC;
 
@@ -170,9 +172,9 @@ typedef struct SettingsDataStruct {
   //
   // ULTIPANEL
   //
-  int lcd_preheat_hotend_temp[2],                       // M145 S0 H
+  int16_t lcd_preheat_hotend_temp[2],                   // M145 S0 H
-      lcd_preheat_bed_temp[2],                          // M145 S0 B
+          lcd_preheat_bed_temp[2],                      // M145 S0 B
-      lcd_preheat_fan_speed[2];                         // M145 S0 F
+          lcd_preheat_fan_speed[2];                     // M145 S0 F
 
   //
   // PIDTEMP
@@ -247,6 +249,8 @@ typedef struct SettingsDataStruct {
 
 } SettingsData;
 
+#pragma pack(pop)
+
 MarlinSettings settings;
 
 #if ENABLED(AUTO_BED_LEVELING_BILINEAR)

Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Anet/A6/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Anet/A8/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Creality/CR-10/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h

@@ -805,15 +805,15 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// If enabled, axes won't move below MIN_POS in response to movement commands.
 //#define MIN_SOFTWARE_ENDSTOPS
+// Min software endstops constrain movement within minimum coordinate bounds
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// If enabled, axes won't move above MAX_POS in response to movement commands.
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X

Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Malyan/M150/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Micromake/C1/basic/Configuration.h

@@ -804,7 +804,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -812,7 +812,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X

Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h

@@ -804,7 +804,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -812,7 +812,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X

Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h

@@ -512,7 +512,6 @@
   #define SD_DETECT_INVERTED
 
   #define SD_FINISHED_STEPPERRELEASE true          // Disable steppers when SD Print is finished
-
   #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
 
   // Reverse SD sort to show "more recent" files first, according to the card's FAT.
@@ -614,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Sanguinololu/Configuration_adv.h

@@ -222,6 +222,17 @@
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
+/**
+ * Part-Cooling Fan Multiplexer
+ *
+ * This feature allows you to digitally multiplex the fan output.
+ * The multiplexer is automatically switched at tool-change.
+ * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
+ */
+#define FANMUX0_PIN -1
+#define FANMUX1_PIN -1
+#define FANMUX2_PIN -1
+
 /**
  * M355 Case Light on-off / brightness
  */
@@ -602,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/TinyBoy2/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Tronxy/X1/Configuration.h

@@ -800,7 +800,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -808,7 +808,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X

Marlin/example_configurations/Velleman/K8200/Configuration_adv.h

@@ -527,10 +527,12 @@
   #define SD_FINISHED_STEPPERRELEASE true          // Disable steppers when SD Print is finished
   #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
 
-  #define SDCARD_RATHERRECENTFIRST  //reverse file order of sd card menu display. Its sorted practically after the file system block order.
+  // Reverse SD sort to show "more recent" files first, according to the card's FAT.
-  // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
+  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
-  // using:
+  #define SDCARD_RATHERRECENTFIRST
-  #define MENU_ADDAUTOSTART
+
+  // Add an option in the menu to run all auto#.g files
+  //#define MENU_ADDAUTOSTART
 
   /**
    * Sort SD file listings in alphabetical order.
@@ -624,6 +626,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Velleman/K8400/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h

@@ -615,6 +615,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   //#define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -930,15 +930,15 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
 //#define MIN_SOFTWARE_ENDSTOPS
+// Min software endstops constrain movement within minimum coordinate bounds
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -615,6 +615,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -1057,6 +1057,11 @@
   //#define PROBE_Y_FIRST
 
   #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+
+    // Beyond the probed grid, continue the implied tilt?
+    // Default is to maintain the height of the nearest edge.
+    //#define EXTRAPOLATE_BEYOND_GRID
+
     //
     // Experimental Subdivision of the grid by Catmull-Rom method.
     // Synthesizes intermediate points to produce a more detailed mesh.

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -615,6 +615,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/delta/generic/Configuration.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -615,6 +615,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -615,6 +615,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -620,6 +620,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -929,15 +929,15 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
 //#define MIN_SOFTWARE_ENDSTOPS
+// Min software endstops constrain movement within minimum coordinate bounds
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -1,4 +1,4 @@
-/**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -615,6 +615,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h

@@ -814,15 +814,15 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
 //#define MIN_SOFTWARE_ENDSTOPS
+// Min software endstops constrain movement within minimum coordinate bounds
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X

Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 
@@ -1559,7 +1562,6 @@
  * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
  * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
  */
-
 #define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
   #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -613,6 +613,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/example_configurations/wt150/Configuration.h

@@ -757,7 +757,7 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR false
 
-// Enable this option for Toshiba steppers
+// Enable this option for Toshiba stepper drivers
 //#define CONFIG_STEPPERS_TOSHIBA
 
 // @section extruder

Marlin/example_configurations/wt150/Configuration_adv.h

@@ -614,6 +614,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 

Marlin/ultralcd_impl_DOGM.h

@@ -481,8 +481,6 @@ inline void lcd_implementation_status_message(const bool blink) {
   #endif
 }
 
-//#define DOGM_SD_PERCENT
-
 static void lcd_implementation_status_screen() {
 
   const bool blink = lcd_blink();