BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (#16595)
This commit is contained in:
yangwenxiong
committed by
Scott Lahteine
Scott Lahteine
parent
0d166f9c7d
commit
248b7dfa59
@@ -294,19 +294,19 @@
|
||||
#elif defined(HAVE_L6470DRIVER)
|
||||
#error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
|
||||
#elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) || defined(Z3_IS_TMC) \
|
||||
|| defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC)
|
||||
|| defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) || defined(E5_IS_TMC) || defined(E6_IS_TMC) || defined(E7_IS_TMC)
|
||||
#error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
|
||||
#elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) || defined(Z3_IS_TMC26X) \
|
||||
|| defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X)
|
||||
|| defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) || defined(E5_IS_TMC26X) || defined(E6_IS_TMC26X) || defined(E7_IS_TMC26X)
|
||||
#error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h."
|
||||
#elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) || defined(Z3_IS_TMC2130) \
|
||||
|| defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130)
|
||||
|| defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) || defined(E5_IS_TMC2130) || defined(E6_IS_TMC2130) || defined(E7_IS_TMC2130)
|
||||
#error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h."
|
||||
#elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) || defined(Z3_IS_TMC2208) \
|
||||
|| defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208)
|
||||
|| defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) || defined(E5_IS_TMC2208) || defined(E6_IS_TMC2208) || defined(E7_IS_TMC2208)
|
||||
#error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h."
|
||||
#elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) || defined(Z3_IS_L6470) \
|
||||
|| defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470)
|
||||
|| defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) || defined(E5_IS_L6470) || defined(E6_IS_L6470) || defined(E7_IS_L6470)
|
||||
#error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h."
|
||||
#elif defined(AUTOMATIC_CURRENT_CONTROL)
|
||||
#error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
|
||||
@@ -752,8 +752,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
*/
|
||||
#if EXTRUDERS > 1
|
||||
|
||||
#if EXTRUDERS > 6
|
||||
#error "Marlin supports a maximum of 6 EXTRUDERS."
|
||||
#if EXTRUDERS > 8
|
||||
#error "Marlin supports a maximum of 8 EXTRUDERS."
|
||||
#endif
|
||||
|
||||
#if ENABLED(HEATERS_PARALLEL)
|
||||
@@ -1494,6 +1494,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "TEMP_SENSOR_4 1000 requires HOTEND4_PULLUP_RESISTOR_OHMS, HOTEND4_RESISTANCE_25C_OHMS and HOTEND4_BETA in Configuration_adv.h."
|
||||
#elif ENABLED(HEATER_5_USER_THERMISTOR) && !(defined(HOTEND5_PULLUP_RESISTOR_OHMS) && defined(HOTEND5_RESISTANCE_25C_OHMS) && defined(HOTEND5_BETA))
|
||||
#error "TEMP_SENSOR_5 1000 requires HOTEND5_PULLUP_RESISTOR_OHMS, HOTEND5_RESISTANCE_25C_OHMS and HOTEND5_BETA in Configuration_adv.h."
|
||||
#elif ENABLED(HEATER_6_USER_THERMISTOR) && !(defined(HOTEND6_PULLUP_RESISTOR_OHMS) && defined(HOTEND6_RESISTANCE_25C_OHMS) && defined(HOTEND6_BETA))
|
||||
#error "TEMP_SENSOR_6 1000 requires HOTEND6_PULLUP_RESISTOR_OHMS, HOTEND6_RESISTANCE_25C_OHMS and HOTEND6_BETA in Configuration_adv.h."
|
||||
#elif ENABLED(HEATER_7_USER_THERMISTOR) && !(defined(HOTEND7_PULLUP_RESISTOR_OHMS) && defined(HOTEND7_RESISTANCE_25C_OHMS) && defined(HOTEND7_BETA))
|
||||
#error "TEMP_SENSOR_7 1000 requires HOTEND7_PULLUP_RESISTOR_OHMS, HOTEND7_RESISTANCE_25C_OHMS and HOTEND7_BETA in Configuration_adv.h."
|
||||
#elif ENABLED(HEATER_BED_USER_THERMISTOR) && !(defined(BED_PULLUP_RESISTOR_OHMS) && defined(BED_RESISTANCE_25C_OHMS) && defined(BED_BETA))
|
||||
#error "TEMP_SENSOR_BED 1000 requires BED_PULLUP_RESISTOR_OHMS, BED_RESISTANCE_25C_OHMS and BED_BETA in Configuration_adv.h."
|
||||
#elif ENABLED(HEATER_CHAMBER_USER_THERMISTOR) && !(defined(CHAMBER_PULLUP_RESISTOR_OHMS) && defined(CHAMBER_RESISTANCE_25C_OHMS) && defined(CHAMBER_BETA))
|
||||
@@ -1564,13 +1568,45 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#elif !PIN_EXISTS(TEMP_5)
|
||||
#error "TEMP_5_PIN not defined for this board."
|
||||
#endif
|
||||
#if HOTENDS > 6
|
||||
#if TEMP_SENSOR_6 == 0
|
||||
#error "TEMP_SENSOR_6 is required with 6 HOTENDS."
|
||||
#elif !HAS_HEATER_6
|
||||
#error "HEATER_6_PIN not defined for this board."
|
||||
#elif !PIN_EXISTS(TEMP_6)
|
||||
#error "TEMP_6_PIN not defined for this board."
|
||||
#endif
|
||||
#if HOTENDS > 7
|
||||
#if TEMP_SENSOR_7 == 0
|
||||
#error "TEMP_SENSOR_7 is required with 7 HOTENDS."
|
||||
#elif !HAS_HEATER_7
|
||||
#error "HEATER_7_PIN not defined for this board."
|
||||
#elif !PIN_EXISTS(TEMP_7)
|
||||
#error "TEMP_7_PIN not defined for this board."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_7 != 0
|
||||
#error "TEMP_SENSOR_7 shouldn't be set with only 7 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_6 != 0
|
||||
#error "TEMP_SENSOR_6 shouldn't be set with only 6 HOTENDS."
|
||||
#elif TEMP_SENSOR_7 != 0
|
||||
#error "TEMP_SENSOR_7 shouldn't be set with only 6 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 5 HOTENDS."
|
||||
#elif TEMP_SENSOR_6 != 0
|
||||
#error "TEMP_SENSOR_6 shouldn't be set with only 5 HOTENDS."
|
||||
#elif TEMP_SENSOR_7 != 0
|
||||
#error "TEMP_SENSOR_7 shouldn't be set with only 5 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_4 != 0
|
||||
#error "TEMP_SENSOR_4 shouldn't be set with only 4 HOTENDS."
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 4 HOTENDS."
|
||||
#elif TEMP_SENSOR_6 != 0
|
||||
#error "TEMP_SENSOR_6 shouldn't be set with only 4 HOTENDS."
|
||||
#elif TEMP_SENSOR_7 != 0
|
||||
#error "TEMP_SENSOR_7 shouldn't be set with only 4 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_3 != 0
|
||||
#error "TEMP_SENSOR_3 shouldn't be set with only 3 HOTENDS."
|
||||
@@ -1578,6 +1614,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "TEMP_SENSOR_4 shouldn't be set with only 3 HOTENDS."
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 3 HOTENDS."
|
||||
#elif TEMP_SENSOR_6 != 0
|
||||
#error "TEMP_SENSOR_6 shouldn't be set with only 3 HOTENDS."
|
||||
#elif TEMP_SENSOR_7 != 0
|
||||
#error "TEMP_SENSOR_7 shouldn't be set with only 3 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_2 != 0
|
||||
#error "TEMP_SENSOR_2 shouldn't be set with only 2 HOTENDS."
|
||||
@@ -1587,6 +1627,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "TEMP_SENSOR_4 shouldn't be set with only 2 HOTENDS."
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 2 HOTENDS."
|
||||
#elif TEMP_SENSOR_6 != 0
|
||||
#error "TEMP_SENSOR_6 shouldn't be set with only 2 HOTENDS."
|
||||
#elif TEMP_SENSOR_7 != 0
|
||||
#error "TEMP_SENSOR_7 shouldn't be set with only 2 HOTENDS."
|
||||
#endif
|
||||
#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
#error "TEMP_SENSOR_1 shouldn't be set with only 1 HOTEND."
|
||||
@@ -1598,6 +1642,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "TEMP_SENSOR_4 shouldn't be set with only 1 HOTEND."
|
||||
#elif TEMP_SENSOR_5 != 0
|
||||
#error "TEMP_SENSOR_5 shouldn't be set with only 1 HOTEND."
|
||||
#elif TEMP_SENSOR_6 != 0
|
||||
#error "TEMP_SENSOR_6 shouldn't be set with only 1 HOTEND."
|
||||
#elif TEMP_SENSOR_7 != 0
|
||||
#error "TEMP_SENSOR_7 shouldn't be set with only 1 HOTEND."
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_PROBE
|
||||
@@ -1680,6 +1728,16 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#if !(PIN_EXISTS(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
|
||||
#error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 6
|
||||
#if !(PIN_EXISTS(E6_STEP, E6_DIR) && HAS_E6_ENABLE)
|
||||
#error "E6_STEP_PIN, E6_DIR_PIN, or E6_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#if E_STEPPERS > 7
|
||||
#if !(PIN_EXISTS(E7_STEP, E7_DIR) && HAS_E7_ENABLE)
|
||||
#error "E7_STEP_PIN, E7_DIR_PIN, or E7_ENABLE_PIN not defined for this board."
|
||||
#endif
|
||||
#endif // E_STEPPERS > 7
|
||||
#endif // E_STEPPERS > 6
|
||||
#endif // E_STEPPERS > 5
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
@@ -2008,6 +2066,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "An SPI driven TMC driver on E4 requires E4_CS_PIN."
|
||||
#elif INVALID_TMC_SPI(E5)
|
||||
#error "An SPI driven TMC driver on E5 requires E5_CS_PIN."
|
||||
#elif INVALID_TMC_SPI(E6)
|
||||
#error "An SPI driven TMC driver on E6 requires E6_CS_PIN."
|
||||
#elif INVALID_TMC_SPI(E7)
|
||||
#error "An SPI driven TMC driver on E7 requires E7_CS_PIN."
|
||||
#endif
|
||||
#undef INVALID_TMC_SPI
|
||||
|
||||
@@ -2041,6 +2103,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#error "TMC2208 or TMC2209 on E4 requires E4_HARDWARE_SERIAL or E4_SERIAL_(RX|TX)_PIN."
|
||||
#elif INVALID_TMC_UART(E5)
|
||||
#error "TMC2208 or TMC2209 on E5 requires E5_HARDWARE_SERIAL or E5_SERIAL_(RX|TX)_PIN."
|
||||
#elif INVALID_TMC_UART(E6)
|
||||
#error "TMC2208 or TMC2209 on E6 requires E6_HARDWARE_SERIAL or E6_SERIAL_(RX|TX)_PIN."
|
||||
#elif INVALID_TMC_UART(E7)
|
||||
#error "TMC2208 or TMC2209 on E7 requires E7_HARDWARE_SERIAL or E7_SERIAL_(RX|TX)_PIN."
|
||||
#endif
|
||||
#undef INVALID_TMC_UART
|
||||
|
||||
@@ -2192,7 +2258,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
|| (IN_CHAIN(Z3) && !PIN_EXISTS(Z3_CS)) || (IN_CHAIN(E0) && !PIN_EXISTS(E0_CS)) \
|
||||
|| (IN_CHAIN(E1) && !PIN_EXISTS(E1_CS)) || (IN_CHAIN(E2) && !PIN_EXISTS(E2_CS)) \
|
||||
|| (IN_CHAIN(E3) && !PIN_EXISTS(E3_CS)) || (IN_CHAIN(E4) && !PIN_EXISTS(E4_CS)) \
|
||||
|| (IN_CHAIN(E5) && !PIN_EXISTS(E5_CS))
|
||||
|| (IN_CHAIN(E5) && !PIN_EXISTS(E5_CS)) || (IN_CHAIN(E6) && !PIN_EXISTS(E6_CS)) \
|
||||
|| (IN_CHAIN(E7) && !PIN_EXISTS(E7_CS))
|
||||
#error "All chained TMC drivers need a CS pin."
|
||||
#else
|
||||
#if IN_CHAIN(X)
|
||||
@@ -2221,6 +2288,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
#define CS_COMPARE E4_CS_PIN
|
||||
#elif IN_CHAIN(E5)
|
||||
#define CS_COMPARE E5_CS_PIN
|
||||
#elif IN_CHAIN(E6)
|
||||
#define CS_COMPARE E6_CS_PIN
|
||||
#elif IN_CHAIN(E7)
|
||||
#define CS_COMPARE E7_CS_PIN
|
||||
#endif
|
||||
#if (IN_CHAIN(X) && X_CS_PIN != CS_COMPARE) || (IN_CHAIN(Y) && Y_CS_PIN != CS_COMPARE) \
|
||||
|| (IN_CHAIN(Z) && Z_CS_PIN != CS_COMPARE) || (IN_CHAIN(X2) && X2_CS_PIN != CS_COMPARE) \
|
||||
@@ -2228,7 +2299,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
||||
|| (IN_CHAIN(Z3) && Z3_CS_PIN != CS_COMPARE) || (IN_CHAIN(E0) && E0_CS_PIN != CS_COMPARE) \
|
||||
|| (IN_CHAIN(E1) && E1_CS_PIN != CS_COMPARE) || (IN_CHAIN(E2) && E2_CS_PIN != CS_COMPARE) \
|
||||
|| (IN_CHAIN(E3) && E3_CS_PIN != CS_COMPARE) || (IN_CHAIN(E4) && E4_CS_PIN != CS_COMPARE) \
|
||||
|| (IN_CHAIN(E5) && E5_CS_PIN != CS_COMPARE)
|
||||
|| (IN_CHAIN(E5) && E5_CS_PIN != CS_COMPARE) || (IN_CHAIN(E6) && E6_CS_PIN != CS_COMPARE) \
|
||||
|| (IN_CHAIN(E7) && E7_CS_PIN != CS_COMPARE)
|
||||
#error "All chained TMC drivers must use the same CS pin."
|
||||
#endif
|
||||
#endif
|
||||
@@ -2521,12 +2593,26 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with E4_AUTO_FAN_PIN."
|
||||
#elif _PIN_CONFLICT(E5_AUTO_FAN)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with E5_AUTO_FAN_PIN."
|
||||
#elif _PIN_CONFLICT(E6_AUTO_FAN)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with E6_AUTO_FAN_PIN."
|
||||
#elif _PIN_CONFLICT(E7_AUTO_FAN)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with E7_AUTO_FAN_PIN."
|
||||
#elif _PIN_CONFLICT(FAN)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN_PIN."
|
||||
#elif _PIN_CONFLICT(FAN1)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN1_PIN."
|
||||
#elif _PIN_CONFLICT(FAN2)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN2_PIN."
|
||||
#elif _PIN_CONFLICT(FAN3)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN3_PIN."
|
||||
#elif _PIN_CONFLICT(FAN4)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN4_PIN."
|
||||
#elif _PIN_CONFLICT(FAN5)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN5_PIN."
|
||||
#elif _PIN_CONFLICT(FAN6)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN6_PIN."
|
||||
#elif _PIN_CONFLICT(FAN7)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with FAN7_PIN."
|
||||
#elif _PIN_CONFLICT(CONTROLLERFAN)
|
||||
#error "SPINDLE_LASER_PWM_PIN conflicts with CONTROLLERFAN_PIN."
|
||||
#elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_XY)
|
||||
|
||||
Reference in New Issue
Block a user