Reduced string storage using tokens (#15593)
This commit is contained in:
Scott Lahteine
GitHub
@@ -80,36 +80,16 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("Offsets Applied");
|
||||
PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Set Origin");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("Preheat ") PREHEAT_1_LABEL;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H0 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H1 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H2 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H3 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H4 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H5 = _UxGT("Preheat ") PREHEAT_1_LABEL " " LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("Preheat ") PREHEAT_1_LABEL " ~";
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E0 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E1 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E2 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E3 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E4 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E5 = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" End ~");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" All");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" Bed");
|
||||
PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("Preheat ") PREHEAT_1_LABEL _UxGT(" Conf");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2 = _UxGT("Preheat ") PREHEAT_2_LABEL;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H0 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H1 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H2 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H3 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H4 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H5 = _UxGT("Preheat ") PREHEAT_2_LABEL " " LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_H = _UxGT("Preheat ") PREHEAT_2_LABEL " ~";
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E0 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E1 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E2 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E3 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E4 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E5 = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_END_E = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" End ~");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_ALL = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" All");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" Bed");
|
||||
PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = _UxGT("Preheat ") PREHEAT_2_LABEL _UxGT(" Conf");
|
||||
@@ -255,12 +235,7 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Move Y");
|
||||
PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Move Z");
|
||||
PROGMEM Language_Str MSG_MOVE_E = _UxGT("Extruder");
|
||||
PROGMEM Language_Str MSG_MOVE_E0 = _UxGT("Extruder ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_MOVE_E1 = _UxGT("Extruder ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_MOVE_E2 = _UxGT("Extruder ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_MOVE_E3 = _UxGT("Extruder ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_MOVE_E4 = _UxGT("Extruder ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_MOVE_E5 = _UxGT("Extruder ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Extruder *");
|
||||
PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("Hotend too cold");
|
||||
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("Move %smm");
|
||||
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Move 0.1mm");
|
||||
@@ -269,29 +244,15 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_SPEED = _UxGT("Speed");
|
||||
PROGMEM Language_Str MSG_BED_Z = _UxGT("Bed Z");
|
||||
PROGMEM Language_Str MSG_NOZZLE = _UxGT("Nozzle");
|
||||
PROGMEM Language_Str MSG_NOZZLE_0 = _UxGT("Nozzle ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_NOZZLE_1 = _UxGT("Nozzle ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_NOZZLE_2 = _UxGT("Nozzle ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_NOZZLE_3 = _UxGT("Nozzle ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_NOZZLE_4 = _UxGT("Nozzle ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_NOZZLE_5 = _UxGT("Nozzle ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Nozzle ~");
|
||||
PROGMEM Language_Str MSG_BED = _UxGT("Bed");
|
||||
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Enclosure");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Fan Speed");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_1 = _UxGT("Fan Speed 1");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_2 = _UxGT("Fan Speed 2");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_3 = _UxGT("Fan Speed 3");
|
||||
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Fan Speed =");
|
||||
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Extra Fan Speed");
|
||||
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_1 = _UxGT("Extra Fan Speed 1");
|
||||
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_2 = _UxGT("Extra Fan Speed 2");
|
||||
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_3 = _UxGT("Extra Fan Speed 3");
|
||||
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Extra Fan Speed =");
|
||||
PROGMEM Language_Str MSG_FLOW = _UxGT("Flow");
|
||||
PROGMEM Language_Str MSG_FLOW_0 = _UxGT("Flow ") LCD_STR_N0;
|
||||
PROGMEM Language_Str MSG_FLOW_1 = _UxGT("Flow ") LCD_STR_N1;
|
||||
PROGMEM Language_Str MSG_FLOW_2 = _UxGT("Flow ") LCD_STR_N2;
|
||||
PROGMEM Language_Str MSG_FLOW_3 = _UxGT("Flow ") LCD_STR_N3;
|
||||
PROGMEM Language_Str MSG_FLOW_4 = _UxGT("Flow ") LCD_STR_N4;
|
||||
PROGMEM Language_Str MSG_FLOW_5 = _UxGT("Flow ") LCD_STR_N5;
|
||||
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Flow ~");
|
||||
PROGMEM Language_Str MSG_CONTROL = _UxGT("Control");
|
||||
PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min");
|
||||
PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max");
|
||||
@@ -299,48 +260,18 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Autotemp");
|
||||
PROGMEM Language_Str MSG_LCD_ON = _UxGT("On");
|
||||
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Off");
|
||||
PROGMEM Language_Str MSG_AUTOTUNE_PID = _UxGT("PID Autotune");
|
||||
PROGMEM Language_Str MSG_AUTOTUNE_PID_E0 = _UxGT("PID Autotune ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_AUTOTUNE_PID_E1 = _UxGT("PID Autotune ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_AUTOTUNE_PID_E2 = _UxGT("PID Autotune ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_AUTOTUNE_PID_E3 = _UxGT("PID Autotune ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_AUTOTUNE_PID_E4 = _UxGT("PID Autotune ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_AUTOTUNE_PID_E5 = _UxGT("PID Autotune ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT("PID Autotune");
|
||||
PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT("PID Autotune *");
|
||||
PROGMEM Language_Str MSG_PID_P = _UxGT("PID-P");
|
||||
PROGMEM Language_Str MSG_PID_P_E0 = _UxGT("PID-P ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_PID_P_E1 = _UxGT("PID-P ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_PID_P_E2 = _UxGT("PID-P ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_PID_P_E3 = _UxGT("PID-P ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_PID_P_E4 = _UxGT("PID-P ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_PID_P_E5 = _UxGT("PID-P ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_PID_P_E = _UxGT("PID-P *");
|
||||
PROGMEM Language_Str MSG_PID_I = _UxGT("PID-I");
|
||||
PROGMEM Language_Str MSG_PID_I_E0 = _UxGT("PID-I ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_PID_I_E1 = _UxGT("PID-I ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_PID_I_E2 = _UxGT("PID-I ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_PID_I_E3 = _UxGT("PID-I ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_PID_I_E4 = _UxGT("PID-I ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_PID_I_E5 = _UxGT("PID-I ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_PID_I_E = _UxGT("PID-I *");
|
||||
PROGMEM Language_Str MSG_PID_D = _UxGT("PID-D");
|
||||
PROGMEM Language_Str MSG_PID_D_E0 = _UxGT("PID-D ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_PID_D_E1 = _UxGT("PID-D ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_PID_D_E2 = _UxGT("PID-D ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_PID_D_E3 = _UxGT("PID-D ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_PID_D_E4 = _UxGT("PID-D ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_PID_D_E5 = _UxGT("PID-D ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_PID_D_E = _UxGT("PID-D *");
|
||||
PROGMEM Language_Str MSG_PID_C = _UxGT("PID-C");
|
||||
PROGMEM Language_Str MSG_PID_C_E0 = _UxGT("PID-C ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_PID_C_E1 = _UxGT("PID-C ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_PID_C_E2 = _UxGT("PID-C ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_PID_C_E3 = _UxGT("PID-C ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_PID_C_E4 = _UxGT("PID-C ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_PID_C_E5 = _UxGT("PID-C ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_PID_C_E = _UxGT("PID-C *");
|
||||
PROGMEM Language_Str MSG_SELECT = _UxGT("Select");
|
||||
PROGMEM Language_Str MSG_SELECT_E0 = _UxGT("Select ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_SELECT_E1 = _UxGT("Select ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_SELECT_E2 = _UxGT("Select ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_SELECT_E3 = _UxGT("Select ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_SELECT_E4 = _UxGT("Select ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_SELECT_E5 = _UxGT("Select ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_SELECT_E = _UxGT("Select *");
|
||||
PROGMEM Language_Str MSG_ACC = _UxGT("Accel");
|
||||
PROGMEM Language_Str MSG_JERK = _UxGT("Jerk");
|
||||
PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT("-Jerk");
|
||||
@@ -353,12 +284,7 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B;
|
||||
PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C;
|
||||
PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E;
|
||||
PROGMEM Language_Str MSG_VMAX_E0 = _UxGT("Vmax ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_VMAX_E1 = _UxGT("Vmax ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_VMAX_E2 = _UxGT("Vmax ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_VMAX_E3 = _UxGT("Vmax ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_VMAX_E4 = _UxGT("Vmax ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_VMAX_E5 = _UxGT("Vmax ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *");
|
||||
PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin");
|
||||
PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("VTrav Min");
|
||||
PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Acceleration");
|
||||
@@ -366,12 +292,7 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B;
|
||||
PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C;
|
||||
PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E;
|
||||
PROGMEM Language_Str MSG_AMAX_E0 = _UxGT("Amax ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_AMAX_E1 = _UxGT("Amax ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_AMAX_E2 = _UxGT("Amax ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_AMAX_E3 = _UxGT("Amax ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_AMAX_E4 = _UxGT("Amax ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_AMAX_E5 = _UxGT("Amax ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *");
|
||||
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-Retract");
|
||||
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-Travel");
|
||||
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Steps/mm");
|
||||
@@ -379,32 +300,17 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("steps/mm");
|
||||
PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("steps/mm");
|
||||
PROGMEM Language_Str MSG_E_STEPS = _UxGT("Esteps/mm");
|
||||
PROGMEM Language_Str MSG_E0_STEPS = LCD_STR_E0 _UxGT("steps/mm");
|
||||
PROGMEM Language_Str MSG_E1_STEPS = LCD_STR_E1 _UxGT("steps/mm");
|
||||
PROGMEM Language_Str MSG_E2_STEPS = LCD_STR_E2 _UxGT("steps/mm");
|
||||
PROGMEM Language_Str MSG_E3_STEPS = LCD_STR_E3 _UxGT("steps/mm");
|
||||
PROGMEM Language_Str MSG_E4_STEPS = LCD_STR_E4 _UxGT("steps/mm");
|
||||
PROGMEM Language_Str MSG_E5_STEPS = LCD_STR_E5 _UxGT("steps/mm");
|
||||
PROGMEM Language_Str MSG_EN_STEPS = _UxGT("*steps/mm");
|
||||
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperature");
|
||||
PROGMEM Language_Str MSG_MOTION = _UxGT("Motion");
|
||||
PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament");
|
||||
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm³");
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Fil. Dia.");
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E0 = _UxGT("Fil. Dia. ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E1 = _UxGT("Fil. Dia. ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E2 = _UxGT("Fil. Dia. ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E3 = _UxGT("Fil. Dia. ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E4 = _UxGT("Fil. Dia. ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E5 = _UxGT("Fil. Dia. ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *");
|
||||
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("Unload mm");
|
||||
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("Load mm");
|
||||
PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K");
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E0 = _UxGT("Advance K ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E1 = _UxGT("Advance K ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E2 = _UxGT("Advance K ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E3 = _UxGT("Advance K ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E4 = _UxGT("Advance K ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E5 = _UxGT("Advance K ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *");
|
||||
PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD Contrast");
|
||||
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("Store Settings");
|
||||
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Load Settings");
|
||||
@@ -424,11 +330,14 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("Reset");
|
||||
PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("Cancel");
|
||||
PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("Done");
|
||||
PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT("Back");
|
||||
PROGMEM Language_Str MSG_BUTTON_PROCEED = _UxGT("Proceed");
|
||||
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Pause Print");
|
||||
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Resume Print");
|
||||
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Stop Print");
|
||||
PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("Printing Object");
|
||||
PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("Cancel Object");
|
||||
PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT("Cancel Object =");
|
||||
PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("Outage Recovery");
|
||||
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Print from Media");
|
||||
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("No Media");
|
||||
@@ -457,26 +366,11 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPD = _UxGT("Retract Speed");
|
||||
PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("Nozzle Standby");
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Change Filament");
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E0 = _UxGT("Change Filament ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E1 = _UxGT("Change Filament ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E2 = _UxGT("Change Filament ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E3 = _UxGT("Change Filament ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E4 = _UxGT("Change Filament ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E5 = _UxGT("Change Filament ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Change Filament *");
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("Load Filament");
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E0 = _UxGT("Load Filament ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E1 = _UxGT("Load Filament ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E2 = _UxGT("Load Filament ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E3 = _UxGT("Load Filament ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E4 = _UxGT("Load Filament ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E5 = _UxGT("Load Filament ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT("Load Filament *");
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("Unload Filament");
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E0 = _UxGT("Unload Filament ") LCD_STR_E0;
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E1 = _UxGT("Unload Filament ") LCD_STR_E1;
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E2 = _UxGT("Unload Filament ") LCD_STR_E2;
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E3 = _UxGT("Unload Filament ") LCD_STR_E3;
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E4 = _UxGT("Unload Filament ") LCD_STR_E4;
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E5 = _UxGT("Unload Filament ") LCD_STR_E5;
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT("Unload Filament *");
|
||||
PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("Unload All");
|
||||
PROGMEM Language_Str MSG_INIT_MEDIA = _UxGT("Init. Media");
|
||||
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Change Media");
|
||||
@@ -612,32 +506,19 @@ namespace Language_en {
|
||||
PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("Load All");
|
||||
PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("Load to Nozzle");
|
||||
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("Eject Filament");
|
||||
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT0 = _UxGT("Eject Filament 1");
|
||||
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT1 = _UxGT("Eject Filament 2");
|
||||
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT2 = _UxGT("Eject Filament 3");
|
||||
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT3 = _UxGT("Eject Filament 4");
|
||||
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT4 = _UxGT("Eject Filament 5");
|
||||
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT("Eject Filament ~");
|
||||
PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("Unload Filament");
|
||||
PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("Loading Fil. %i...");
|
||||
PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT = _UxGT("Ejecting Fil. ...");
|
||||
PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT = _UxGT("Unloading Fil....");
|
||||
PROGMEM Language_Str MSG_MMU2_ALL = _UxGT("All");
|
||||
PROGMEM Language_Str MSG_MMU2_FILAMENT0 = _UxGT("Filament 1");
|
||||
PROGMEM Language_Str MSG_MMU2_FILAMENT1 = _UxGT("Filament 2");
|
||||
PROGMEM Language_Str MSG_MMU2_FILAMENT2 = _UxGT("Filament 3");
|
||||
PROGMEM Language_Str MSG_MMU2_FILAMENT3 = _UxGT("Filament 4");
|
||||
PROGMEM Language_Str MSG_MMU2_FILAMENT4 = _UxGT("Filament 5");
|
||||
PROGMEM Language_Str MSG_MMU2_FILAMENT_N = _UxGT("Filament ~");
|
||||
PROGMEM Language_Str MSG_MMU2_RESET = _UxGT("Reset MMU");
|
||||
PROGMEM Language_Str MSG_MMU2_RESETTING = _UxGT("Resetting MMU...");
|
||||
PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER = _UxGT("Remove, click");
|
||||
|
||||
PROGMEM Language_Str MSG_MIX = _UxGT("Mix");
|
||||
PROGMEM Language_Str MSG_MIX_COMPONENT_1 = _UxGT("Component 1");
|
||||
PROGMEM Language_Str MSG_MIX_COMPONENT_2 = _UxGT("Component 2");
|
||||
PROGMEM Language_Str MSG_MIX_COMPONENT_3 = _UxGT("Component 3");
|
||||
PROGMEM Language_Str MSG_MIX_COMPONENT_4 = _UxGT("Component 4");
|
||||
PROGMEM Language_Str MSG_MIX_COMPONENT_5 = _UxGT("Component 5");
|
||||
PROGMEM Language_Str MSG_MIX_COMPONENT_6 = _UxGT("Component 6");
|
||||
PROGMEM Language_Str MSG_MIX_COMPONENT_N = _UxGT("Component =");
|
||||
PROGMEM Language_Str MSG_MIXER = _UxGT("Mixer");
|
||||
PROGMEM Language_Str MSG_GRADIENT = _UxGT("Gradient");
|
||||
PROGMEM Language_Str MSG_FULL_GRADIENT = _UxGT("Full Gradient");
|
||||
@@ -714,6 +595,6 @@ namespace Language_en {
|
||||
#define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED
|
||||
#define MSG_FIRST_EXTRA_FAN_SPEED MSG_EXTRA_FAN_SPEED
|
||||
#else
|
||||
#define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED_1
|
||||
#define MSG_FIRST_EXTRA_FAN_SPEED MSG_EXTRA_FAN_SPEED_1
|
||||
#define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED_N
|
||||
#define MSG_FIRST_EXTRA_FAN_SPEED MSG_EXTRA_FAN_SPEED_N
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user