From 0aa100a31ed0ec4757468f0a8d88370e74518362 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 11 Mar 2018 05:51:14 -0500 Subject: [PATCH 1/2] Add Z_AFTER_PROBING option Some fix-mounted probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred. --- Marlin/Configuration.h | 1 + Marlin/Marlin.h | 5 +++++ Marlin/Marlin_main.cpp | 41 +++++++++++++++++++++++++++++++++++------ Marlin/SanityCheck.h | 4 +++- Marlin/ubl_G29.cpp | 7 +++++++ 5 files changed, 51 insertions(+), 7 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 0fffc08e5a..350348c8a8 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 4730ab2514..5da03d3d6a 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -389,6 +389,11 @@ void report_current_position(); #if HAS_BED_PROBE extern float zprobe_zoffset; bool set_probe_deployed(const bool deploy); + #ifdef Z_AFTER_PROBING + void move_z_after_probing(); + #else + inline void move_z_after_probing() {} + #endif #define DEPLOY_PROBE() set_probe_deployed(true) #define STOW_PROBE() set_probe_deployed(false) #else diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 2d8e2235c4..f8ecaddae7 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -3839,6 +3839,15 @@ inline void gcode_G4() { #endif // DELTA +#ifdef Z_AFTER_PROBING + void move_z_after_probing() { + if (current_position[Z_AXIS] != Z_AFTER_PROBING) { + do_blocking_move_to_z(Z_AFTER_PROBING); + current_position[Z_AXIS] = Z_AFTER_PROBING; + } + } +#endif + #if ENABLED(Z_SAFE_HOMING) inline void home_z_safely() { @@ -4068,6 +4077,11 @@ inline void gcode_G28(const bool always_home_all) { #else HOMEAXIS(Z); #endif + + #if HOMING_Z_WITH_PROBE + move_z_after_probing(); + #endif + } // home_all || homeZ #endif // Z_HOME_DIR < 0 @@ -5015,7 +5029,7 @@ void home_all_axes() { gcode_G28(true); } #endif // AUTO_BED_LEVELING_3POINT - // Raise to _Z_CLEARANCE_DEPLOY_PROBE. Stow the probe. + // Stow the probe. No raise for FIX_MOUNTED_PROBE. if (STOW_PROBE()) { set_bed_leveling_enabled(abl_should_enable); measured_z = NAN; @@ -5249,12 +5263,16 @@ void home_all_axes() { gcode_G28(true); } if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< G29"); #endif - report_current_position(); - KEEPALIVE_STATE(IN_HANDLER); if (planner.leveling_active) SYNC_PLAN_POSITION_KINEMATIC(); + + #if HAS_BED_PROBE + move_z_after_probing(); + #endif + + report_current_position(); } #endif // OLDSCHOOL_ABL @@ -5283,7 +5301,8 @@ void home_all_axes() { gcode_G28(true); } setup_for_endstop_or_probe_move(); - const float measured_z = probe_pt(xpos, ypos, parser.boolval('E'), 1); + const bool do_stow = parser.boolval('E'); + const float measured_z = probe_pt(xpos, ypos, do_stow, 1); if (!isnan(measured_z)) { SERIAL_PROTOCOLPAIR("Bed X: ", FIXFLOAT(xpos)); @@ -5293,6 +5312,8 @@ void home_all_axes() { gcode_G28(true); } clean_up_after_endstop_or_probe_move(); + if (do_stow) move_z_after_probing(); + report_current_position(); } @@ -7600,6 +7621,7 @@ inline void gcode_M42() { set_bed_leveling_enabled(was_enabled); #endif + move_z_after_probing(); report_current_position(); } @@ -9665,12 +9687,19 @@ inline void gcode_M400() { stepper.synchronize(); } /** * M401: Deploy and activate the Z probe */ - inline void gcode_M401() { DEPLOY_PROBE(); } + inline void gcode_M401() { + DEPLOY_PROBE(); + report_current_position(); + } /** * M402: Deactivate and stow the Z probe */ - inline void gcode_M402() { STOW_PROBE(); } + inline void gcode_M402() { + STOW_PROBE(); + move_z_after_probing(); + report_current_position(); + } #endif // HAS_BED_PROBE diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 15e49ddf91..078038d4fe 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -162,7 +162,7 @@ #elif defined(MIN_Z_HEIGHT_FOR_HOMING) #error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration." #elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING) - #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE instead." + #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE and Z_AFTER_PROBING instead." #elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS) #error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration." #elif defined(Z_PROBE_DEPLOY_HEIGHT) || defined(Z_PROBE_TRAVEL_HEIGHT) @@ -762,6 +762,8 @@ static_assert(1 >= 0 #error "Probes need Z_CLEARANCE_DEPLOY_PROBE >= 0." #elif Z_CLEARANCE_BETWEEN_PROBES < 0 #error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0." + #elif Z_AFTER_PROBING < 0 + #error "Probes need Z_AFTER_PROBING >= 0." #endif #if MULTIPLE_PROBING && MULTIPLE_PROBING < 2 diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index cdca64c765..7abe183f84 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -387,6 +387,7 @@ restore_ubl_active_state_and_leave(); } do_blocking_move_to_xy(0.5 * (MESH_MAX_X - (MESH_MIN_X)), 0.5 * (MESH_MAX_Y - (MESH_MIN_Y))); + report_current_position(); } #endif // HAS_BED_PROBE @@ -424,6 +425,8 @@ } probe_entire_mesh(g29_x_pos + X_PROBE_OFFSET_FROM_EXTRUDER, g29_y_pos + Y_PROBE_OFFSET_FROM_EXTRUDER, parser.seen('T'), parser.seen('E'), parser.seen('U')); + + report_current_position(); break; #endif // HAS_BED_PROBE @@ -471,6 +474,8 @@ SERIAL_PROTOCOLLNPGM("G29 P2 finished."); + report_current_position(); + #else SERIAL_PROTOCOLLNPGM("?P2 is only available when an LCD is present."); @@ -754,6 +759,8 @@ } while (location.x_index >= 0 && --max_iterations); STOW_PROBE(); + move_z_after_probing(); + restore_ubl_active_state_and_leave(); do_blocking_move_to_xy( From 33b18dc801fad10f3db2f4cca3d1814015387340 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 11 Mar 2018 05:51:27 -0500 Subject: [PATCH 2/2] Add Z_AFTER_PROBING to example configs --- Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h | 1 + Marlin/example_configurations/AliExpress/CL-260/Configuration.h | 1 + Marlin/example_configurations/Anet/A6/Configuration.h | 2 ++ Marlin/example_configurations/Anet/A8/Configuration.h | 1 + .../example_configurations/BIBO/TouchX/Cyclops/Configuration.h | 1 + .../example_configurations/BIBO/TouchX/default/Configuration.h | 1 + Marlin/example_configurations/BQ/Hephestos/Configuration.h | 1 + Marlin/example_configurations/BQ/Hephestos_2/Configuration.h | 1 + Marlin/example_configurations/BQ/WITBOX/Configuration.h | 1 + Marlin/example_configurations/Cartesio/Configuration.h | 1 + Marlin/example_configurations/Creality/CR-10/Configuration.h | 1 + Marlin/example_configurations/Creality/CR-10S/Configuration.h | 1 + .../example_configurations/Creality/CR-10mini/Configuration.h | 1 + Marlin/example_configurations/Creality/Ender-2/Configuration.h | 1 + Marlin/example_configurations/Creality/Ender-4/Configuration.h | 1 + Marlin/example_configurations/Felix/Configuration.h | 1 + Marlin/example_configurations/Felix/DUAL/Configuration.h | 1 + .../example_configurations/FolgerTech/i3-2020/Configuration.h | 1 + Marlin/example_configurations/Geeetech/GT2560/Configuration.h | 1 + .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 1 + .../Geeetech/Prusa i3 Pro B/bltouch/Configuration.h | 1 + .../Geeetech/Prusa i3 Pro B/noprobe/Configuration.h | 1 + Marlin/example_configurations/Infitary/i3-M508/Configuration.h | 1 + Marlin/example_configurations/JGAurora/A5/Configuration.h | 1 + Marlin/example_configurations/Malyan/M150/Configuration.h | 1 + .../example_configurations/Micromake/C1/basic/Configuration.h | 1 + .../Micromake/C1/enhanced/Configuration.h | 1 + .../RepRapWorld/Megatronics/Configuration.h | 1 + Marlin/example_configurations/RigidBot/Configuration.h | 1 + Marlin/example_configurations/SCARA/Configuration.h | 1 + Marlin/example_configurations/Sanguinololu/Configuration.h | 1 + Marlin/example_configurations/TinyBoy2/Configuration.h | 1 + Marlin/example_configurations/Tronxy/X1/Configuration.h | 1 + Marlin/example_configurations/Tronxy/X5S/Configuration.h | 1 + Marlin/example_configurations/Tronxy/XY100/Configuration.h | 1 + Marlin/example_configurations/Velleman/K8200/Configuration.h | 1 + Marlin/example_configurations/Velleman/K8400/Configuration.h | 1 + .../Velleman/K8400/Dual-head/Configuration.h | 1 + .../example_configurations/Wanhao/Duplicator 6/Configuration.h | 1 + Marlin/example_configurations/adafruit/ST7565/Configuration.h | 1 + .../delta/FLSUN/auto_calibrate/Configuration.h | 1 + .../example_configurations/delta/FLSUN/kossel/Configuration.h | 1 + .../delta/FLSUN/kossel_mini/Configuration.h | 1 + .../example_configurations/delta/Hatchbox_Alpha/Configuration.h | 1 + Marlin/example_configurations/delta/generic/Configuration.h | 1 + Marlin/example_configurations/delta/kossel_mini/Configuration.h | 1 + Marlin/example_configurations/delta/kossel_pro/Configuration.h | 1 + Marlin/example_configurations/delta/kossel_xl/Configuration.h | 1 + Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h | 1 + Marlin/example_configurations/makibox/Configuration.h | 1 + Marlin/example_configurations/tvrrug/Round2/Configuration.h | 1 + Marlin/example_configurations/wt150/Configuration.h | 1 + 52 files changed, 53 insertions(+) diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h index 4d24de9c18..6027f10e19 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h @@ -751,6 +751,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h index 2f9f4be260..6120b9f579 100644 --- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h +++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h index eb93b617f1..2b11d4927a 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration.h +++ b/Marlin/example_configurations/Anet/A6/Configuration.h @@ -801,8 +801,10 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done //#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow //#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +//#define Z_AFTER_PROBING 3 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h index 0271b89db2..6ee71d1127 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration.h +++ b/Marlin/example_configurations/Anet/A8/Configuration.h @@ -738,6 +738,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h index 60a624c9cb..cf10c24816 100644 --- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h +++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h @@ -731,6 +731,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +//#define Z_AFTER_PROBING 10 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h index 3c5e976556..51cae158ca 100644 --- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h +++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h @@ -731,6 +731,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +//#define Z_AFTER_PROBING 10 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h index 84cd8e8672..78d4e3b410 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h @@ -719,6 +719,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h index 3c8167dcb8..a80b2d84f6 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h @@ -732,6 +732,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +//#define Z_AFTER_PROBING 2 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -2 diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h index 623e1c841f..cf6ebe33cb 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h @@ -719,6 +719,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 728c4e37e5..1a16877cdc 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -730,6 +730,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h index f24f8f1cc8..89b900c2fc 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h @@ -741,6 +741,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +//#define Z_AFTER_PROBING 10 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration.h b/Marlin/example_configurations/Creality/CR-10S/Configuration.h index a955a02359..f411f82e08 100644 --- a/Marlin/example_configurations/Creality/CR-10S/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10S/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h index 4d814b7764..bbb613f47d 100644 --- a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h @@ -750,6 +750,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration.h b/Marlin/example_configurations/Creality/Ender-2/Configuration.h index d1db0c747b..bdf4827e46 100644 --- a/Marlin/example_configurations/Creality/Ender-2/Configuration.h +++ b/Marlin/example_configurations/Creality/Ender-2/Configuration.h @@ -735,6 +735,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration.h b/Marlin/example_configurations/Creality/Ender-4/Configuration.h index 3bfc8be7bd..0be832c09a 100644 --- a/Marlin/example_configurations/Creality/Ender-4/Configuration.h +++ b/Marlin/example_configurations/Creality/Ender-4/Configuration.h @@ -741,6 +741,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 1ce29eec7b..32d3041402 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -713,6 +713,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index eaaa467065..d66ac54adc 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -713,6 +713,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h index 552a692d01..2dbe02185a 100644 --- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h @@ -737,6 +737,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 3 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +//#define Z_AFTER_PROBING 3 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h index bc57d0ae2f..17f85ba09d 100644 --- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h @@ -746,6 +746,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h index 7548493f38..4864e46c58 100644 --- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points +//#define Z_AFTER_PROBING 6 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 0bdd9d6275..e6e712203f 100644 --- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -747,6 +747,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index ddc1fc173c..4f396a6185 100644 --- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -746,6 +746,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h index c460f08f86..e4dbd3cf5d 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h @@ -735,6 +735,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration.h b/Marlin/example_configurations/JGAurora/A5/Configuration.h index 68081bc38e..dedd5e15ff 100644 --- a/Marlin/example_configurations/JGAurora/A5/Configuration.h +++ b/Marlin/example_configurations/JGAurora/A5/Configuration.h @@ -743,6 +743,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h index 23881ea7fe..9659f470bd 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration.h @@ -755,6 +755,7 @@ */ //#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow //#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset //#define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h index df1bef3e5c..23d8aa66d6 100644 --- a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h @@ -735,6 +735,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h index 5b535271ba..058fb02d56 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h @@ -735,6 +735,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 2e81555a40..b6b3edf9e8 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 5c331436c3..dd4b407a56 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -729,6 +729,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 3ee74ea9a5..b9f6659417 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -742,6 +742,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h index 3b37a3b2f5..f992fc5e45 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration.h @@ -762,6 +762,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index 037c0a6ce7..215faf30cc 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -782,6 +782,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Tronxy/X1/Configuration.h b/Marlin/example_configurations/Tronxy/X1/Configuration.h index 1e140bde6f..6d1021eefb 100644 --- a/Marlin/example_configurations/Tronxy/X1/Configuration.h +++ b/Marlin/example_configurations/Tronxy/X1/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Tronxy/X5S/Configuration.h b/Marlin/example_configurations/Tronxy/X5S/Configuration.h index f2b92d27e6..4fcb77d310 100644 --- a/Marlin/example_configurations/Tronxy/X5S/Configuration.h +++ b/Marlin/example_configurations/Tronxy/X5S/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Tronxy/XY100/Configuration.h b/Marlin/example_configurations/Tronxy/XY100/Configuration.h index 1f914b2b3d..4b6aad28af 100644 --- a/Marlin/example_configurations/Tronxy/XY100/Configuration.h +++ b/Marlin/example_configurations/Tronxy/XY100/Configuration.h @@ -742,6 +742,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h index 45fa0d0b47..b0190f78be 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h @@ -760,6 +760,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h index 3489546a5b..956014ee99 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h index 9cc2dce48f..75a305e8a6 100644 --- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h index 5c6359a4e3..de438bb6ba 100644 --- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h @@ -741,6 +741,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index c85852c371..f755bdf042 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -731,6 +731,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h index f576fa4b4f..b513b9a28b 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h @@ -861,6 +861,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +//#define Z_AFTER_PROBING 2 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h index b6de20e4f5..a9145e3574 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h @@ -861,6 +861,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +//#define Z_AFTER_PROBING 2 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index afd62edf56..c122bdd24a 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -861,6 +861,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h index 9be4765dcc..4cc2751166 100644 --- a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h @@ -863,6 +863,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 1877a2b17d..0d95ec78b8 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -848,6 +848,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index eefc9ba269..cdf891d62b 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -851,6 +851,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 8c93c39f9c..74c022efd4 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -850,6 +850,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 100 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 940d91ee9b..2970d75651 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -860,6 +860,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 20 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +//#define Z_AFTER_PROBING 10 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h index 76f1492afc..cb1417df5e 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h @@ -744,6 +744,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points +//#define Z_AFTER_PROBING 6 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index bd2518e224..e422c8caa4 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -734,6 +734,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 52e0d8f352..2edddcdc13 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -726,6 +726,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index 09cf3b0de9..03b33e27d5 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -736,6 +736,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_AFTER_PROBING 5 // Z position after probing is done // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20