Replace U8GLI v1.11 with v1.17

In Travis we already test against 1.17.

ArduinoAddons/Arduino_1.0.x/libraries/U8glib/examples/A2Printer/A2Printer.ino

@@ -0,0 +1,131 @@
+/*
+
+  A2Printer.pde
+  
+  Special example code for the A2 Mciro Printer (https://www.sparkfun.com/products/10438)
+  
+  
+  Universal 8bit Graphics Library, http://code.google.com/p/u8glib/
+  
+  Copyright (c) 2013, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+  
+*/
+
+
+#include "U8glib.h"
+
+// use this serial interface
+#define PRINTER_SERIAL Serial
+// #define PRINTER_SERIAL Serial1
+
+
+uint8_t u8g_com_uart(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
+  switch(msg) {
+    case U8G_COM_MSG_WRITE_BYTE:
+      PRINTER_SERIAL.write(arg_val);
+      break;
+  }
+  return 1;
+}
+
+// setup u8g object, please remove comment from one of the following constructor calls
+
+// half resolution
+//U8GLIB u8g(&u8g_dev_a2_micro_printer_192x120_ds, (u8g_com_fnptr)u8g_com_uart);
+
+// full resolution, requires to uncomment U8G_16BIT in u8g.h
+//U8GLIB u8g(&u8g_dev_a2_micro_printer_384x240, (u8g_com_fnptr)u8g_com_uart);
+
+// half resolution, extra log, requires to uncomment U8G_16BIT in u8g.h
+//U8GLIB u8g(&u8g_dev_a2_micro_printer_192x360_ds, (u8g_com_fnptr)u8g_com_uart);
+U8GLIB u8g(&u8g_dev_a2_micro_printer_192x720_ds, (u8g_com_fnptr)u8g_com_uart);
+
+
+
+void drawLogo(uint8_t d) {
+  u8g.setFont(u8g_font_gdr25r);
+  u8g.drawStr(0+d, 30+d, "U");
+  u8g.setFont(u8g_font_gdr30n);
+  u8g.drawStr90(23+d,10+d,"8");
+  u8g.setFont(u8g_font_gdr25r);
+  u8g.drawStr(53+d,30+d,"g");
+  
+  u8g.drawHLine(2+d, 35+d, 47);
+  u8g.drawVLine(45+d, 32+d, 12);
+}
+
+void drawURL(void) {
+  u8g.setFont(u8g_font_4x6);
+  if ( u8g.getHeight() < 59 ) {
+    u8g.drawStr(53,9,"code.google.com");
+    u8g.drawStr(77,18,"/p/u8glib");
+  }
+  else {
+    u8g.drawStr(1,54,"code.google.com/p/u8glib");
+  }
+}
+
+void draw(void) {
+  // graphic commands to redraw the complete screen should be placed here  
+  
+  drawLogo(0);
+  drawURL();
+  u8g.drawFrame(0,0,u8g.getWidth(), u8g.getHeight());
+  
+  u8g.setFont(u8g_font_helvR24r);
+  u8g.setPrintPos(0, 100);
+  u8g.print(u8g.getWidth(), DEC);
+  u8g.print("x");
+  u8g.print(u8g.getHeight(), DEC);
+}
+
+void setup(void) {
+  PRINTER_SERIAL.begin(19200);
+  
+  // flip screen, if required
+  // u8g.setRot180();
+  
+  // assign default color value
+  u8g.setColorIndex(1);         // pixel on
+}
+
+void loop(void) {
+  
+  // picture loop: This will print the picture  
+  u8g.firstPage();  
+  do {
+    draw();
+  } while( u8g.nextPage() );
+
+  // send manual CR to the printer
+  PRINTER_SERIAL.write('\n'); 		
+  
+  // reprint the picture after 10 seconds
+  delay(10000);
+}
+