Remove some trailing white-space

Marlin/Configuration.h

@@ -1692,7 +1692,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h

@@ -1712,7 +1712,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/AliExpress/CL-260/Configuration.h

@@ -1692,7 +1692,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Anet/A6/Configuration.h

@@ -1851,7 +1851,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -1700,7 +1700,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/BQ/Hephestos/Configuration.h

@@ -1683,7 +1683,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/BQ/Hephestos_2/Configuration.h

@@ -1693,7 +1693,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/BQ/WITBOX/Configuration.h

@@ -1683,7 +1683,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Cartesio/Configuration.h

@@ -1691,7 +1691,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -1702,7 +1702,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Felix/Configuration.h

@@ -1674,7 +1674,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -1674,7 +1674,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h

@@ -1697,7 +1697,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Geeetech/GT2560/Configuration.h

@@ -1707,7 +1707,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -1692,7 +1692,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Infitary/i3-M508/Configuration.h

@@ -1696,7 +1696,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Malyan/M150/Configuration.h

@@ -1720,7 +1720,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Micromake/C1/basic/Configuration.h

@@ -1696,7 +1696,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h

@@ -1696,7 +1696,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -1692,7 +1692,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/RigidBot/Configuration.h

@@ -1692,7 +1692,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/SCARA/Configuration.h

@@ -1704,7 +1704,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Sanguinololu/Configuration.h

@@ -1723,7 +1723,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -1748,7 +1748,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Velleman/K8200/Configuration.h

@@ -1722,7 +1722,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Velleman/K8400/Configuration.h

@@ -1692,7 +1692,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h

@@ -1692,7 +1692,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -1692,7 +1692,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1826,7 +1826,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -1819,7 +1819,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/delta/generic/Configuration.h

@@ -1814,7 +1814,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -1817,7 +1817,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1817,7 +1817,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1826,7 +1826,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h

@@ -1706,7 +1706,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .5    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/makibox/Configuration.h

@@ -1695,7 +1695,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -1687,7 +1687,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/example_configurations/wt150/Configuration.h

@@ -1697,7 +1697,7 @@
  * Default extrusion settings
  *
  * These settings control basic extrusion from within the Marlin firmware.
- * 
+ *
  */
 #define DEFAULT_NOMINAL_FILAMENT_DIA 3.00   // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
 #define DEFAULT_NOZZLE_SIZE           .4    // (mm) Diameter of primary nozzle.  Used by G26 Mesh Validation Pattern tool.

Marlin/pins_SILVER_GATE.h

@@ -20,7 +20,7 @@
  *
  */
 
-#if !defined(__AVR_ATmega1281__) && !defined(__AVR_ATmega2561__) 
+#if !defined(__AVR_ATmega1281__) && !defined(__AVR_ATmega2561__)
   #error Oops!  Make sure you have 'Silvergate' selected from the 'Tools -> Boards' menu.
 #endif
 
@@ -71,7 +71,7 @@
 #define TEMP_BED_PIN        6
 
 #if ENABLED(DOGLCD)
-  #if ENABLED(U8GLIB_ST7920)    // SPI GLCD 12864 ST7920 
+  #if ENABLED(U8GLIB_ST7920)    // SPI GLCD 12864 ST7920
     #define LCD_PINS_RS    30
     #define LCD_PINS_ENABLE 20
     #define LCD_PINS_D4    25
@@ -80,7 +80,7 @@
     #define BTN_EN2        22
     #define BTN_ENC        24
     #define LCD_BACKLIGHT_PIN  6
-    #if ENABLED(SILVER_GATE_GLCD_CONTROLLER) 
+    #if ENABLED(SILVER_GATE_GLCD_CONTROLLER)
       #define KILL_PIN     21
       #define HOME_PIN     28
     #endif
@@ -88,7 +88,7 @@
 #endif
 
 #define SD_DETECT_PIN      15
- 
+
 #define STAT_LED_RED_PIN   23
 #define STAT_LED_BLUE_PIN  26
 #define CASE_LIGHT_PIN     51