sravan/Marlin-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

✨ REPORT_ADAPTIVE_FAN_SLOWING (#25537)

Browse Source
This commit is contained in:
StevilKnevil
2023-03-19 00:57:34 +00:00
committed by GitHub
parent 432aeeefe3
commit 7e25e87807
3 changed files with 13 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
Marlin/Configuration_adv.h
View File

@@ -303,9 +303,12 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
#if ENABLED(ADAPTIVE_FAN_SLOWING) && EITHER(MPCTEMP, PIDTEMP)
//#define TEMP_TUNING_MAINTAIN_FAN // Don't slow fan speed during M303 or M306 T
//#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops
#if ENABLED(ADAPTIVE_FAN_SLOWING)
//#define REPORT_ADAPTIVE_FAN_SLOWING // Report fan slowing activity to the console
#if EITHER(MPCTEMP, PIDTEMP)
//#define TEMP_TUNING_MAINTAIN_FAN // Don't slow down the fan speed during M303 or M306 T
#endif
#endif
/**

6
Marlin/src/module/temperature.cpp
View File

@@ -2976,6 +2976,12 @@ void Temperature::init() {
else
scale = 0;
if (TERN0(REPORT_ADAPTIVE_FAN_SLOWING, DEBUGGING(INFO))) {
const uint8_t fss7 = fan_speed_scaler[fan_index] & 0x80;
if (fss7 ^ (scale & 0x80))
serial_ternary(fss7, F("Adaptive Fan Slowing "), nullptr, F("de"), F("activated.\n"));
}
fan_speed_scaler[fan_index] = scale;
}
#endif // ADAPTIVE_FAN_SLOWING

2
buildroot/tests/LPC1769
View File

@@ -18,7 +18,7 @@ opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD \
GRID_MAX_POINTS_X 16 \
NOZZLE_CLEAN_START_POINT "{ { 10, 10, 3 }, { 10, 10, 3 } }" \
NOZZLE_CLEAN_END_POINT "{ { 10, 20, 3 }, { 10, 20, 3 } }"
opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING TEMP_TUNING_MAINTAIN_FAN \
opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING REPORT_ADAPTIVE_FAN_SLOWING TEMP_TUNING_MAINTAIN_FAN \
MAX31865_SENSOR_OHMS_0 MAX31865_CALIBRATION_OHMS_0 \
MAG_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BED_TRAMMING_USE_PROBE BED_TRAMMING_VERIFY_RAISED \