Add LIGHTWEIGHT_UI to example configs

Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Anet/A6/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Anet/A8/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Creality/CR-10/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Creality/Ender/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h

@@ -655,6 +655,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/JGAurora/A5/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Malyan/M150/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Sanguinololu/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/TinyBoy2/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Velleman/K8200/Configuration_adv.h

@@ -669,6 +669,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Velleman/K8400/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h

@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h

@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -663,6 +663,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -658,6 +658,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -656,6 +656,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety

Marlin/example_configurations/wt150/Configuration_adv.h

@@ -657,6 +657,22 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety