sravan/Marlin-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

🐛 Fix PLR pos/sdpos (#26365)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
ThomasToka 2024-01-12 06:56:45 +01:00 committed by GitHub
parent 46f370ae3c
commit ab3497161a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 17 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Marlin/src/feature/powerloss.cpp
View File

@ -358,7 +358,9 @@ void PrintJobRecovery::write() {
* Resume the saved print job * Resume the saved print job
*/ */
void PrintJobRecovery::resume() { void PrintJobRecovery::resume() {
const uint32_t resume_sdpos = info.sdpos; // Get here before the stepper ISR overwrites it // Get these fields before any moves because stepper.cpp overwrites them
const xyze_pos_t resume_pos = info.current_position;
const uint32_t resume_sdpos = info.sdpos;
// Apply the dry-run flag if enabled // Apply the dry-run flag if enabled
if (info.flag.dryrun) marlin_debug_flags |= MARLIN_DEBUG_DRYRUN; if (info.flag.dryrun) marlin_debug_flags |= MARLIN_DEBUG_DRYRUN;
@ -400,7 +402,7 @@ void PrintJobRecovery::resume() {
#endif #endif
// Interpret the saved Z according to flags // Interpret the saved Z according to flags
const float z_print = info.current_position.z, const float z_print = resume_pos.z,
z_raised = z_print + info.zraise; z_raised = z_print + info.zraise;
// //
@ -540,7 +542,7 @@ void PrintJobRecovery::resume() {
// Move back over to the saved XY // Move back over to the saved XY
PROCESS_SUBCOMMANDS_NOW(TS( PROCESS_SUBCOMMANDS_NOW(TS(
F("G1F3000X"), p_float_t(info.current_position.x, 3), 'Y', p_float_t(info.current_position.y, 3) F("G1F3000X"), p_float_t(resume_pos.x, 3), 'Y', p_float_t(resume_pos.y, 3)
)); ));
// Move back down to the saved Z for printing // Move back down to the saved Z for printing
@ -550,7 +552,7 @@ void PrintJobRecovery::resume() {
PROCESS_SUBCOMMANDS_NOW(TS(F("G1F"), info.feedrate)); PROCESS_SUBCOMMANDS_NOW(TS(F("G1F"), info.feedrate));
// Restore E position with G92.9 // Restore E position with G92.9
PROCESS_SUBCOMMANDS_NOW(TS(F("G92.9E"), p_float_t(info.current_position.e, 3))); PROCESS_SUBCOMMANDS_NOW(TS(F("G92.9E"), p_float_t(resume_pos.e, 3)));
TERN_(GCODE_REPEAT_MARKERS, repeat = info.stored_repeat); TERN_(GCODE_REPEAT_MARKERS, repeat = info.stored_repeat);
TERN_(HAS_HOME_OFFSET, home_offset = info.home_offset); TERN_(HAS_HOME_OFFSET, home_offset = info.home_offset);

1
Marlin/src/gcode/feature/powerloss/M1000.cpp
View File

@ -65,6 +65,7 @@ inline void plr_error(FSTR_P const prefix) {
* M1000: Resume from power-loss (undocumented) * M1000: Resume from power-loss (undocumented)
* - With 'S' go to the Resume/Cancel menu * - With 'S' go to the Resume/Cancel menu
* ...unless the bed temperature is already above a configured minimum temperature. * ...unless the bed temperature is already above a configured minimum temperature.
* - With 'C' execute a cancel selection
* - With no parameters, run recovery commands * - With no parameters, run recovery commands
*/ */
void GcodeSuite::M1000() { void GcodeSuite::M1000() {

4
Marlin/src/gcode/queue.cpp
View File

@ -91,6 +91,10 @@ PGM_P GCodeQueue::injected_commands_P; // = nullptr
*/ */
char GCodeQueue::injected_commands[64]; // = { 0 } char GCodeQueue::injected_commands[64]; // = { 0 }
/**
* Commit the accumulated G-code command to the ring buffer,
* also setting its origin info.
*/
void GCodeQueue::RingBuffer::commit_command(const bool skip_ok void GCodeQueue::RingBuffer::commit_command(const bool skip_ok
OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind/*=-1*/) OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind/*=-1*/)
) { ) {