diff --git a/Marlin/src/HAL/AVR/u8g/LCD_defines.h b/Marlin/src/HAL/AVR/u8g/LCD_defines.h
new file mode 100644
index 0000000000..91858c0dbf
--- /dev/null
+++ b/Marlin/src/HAL/AVR/u8g/LCD_defines.h
@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * AVR LCD-specific defines
+ */
+
+uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+#define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_AVR_sw_sp_fn
diff --git a/Marlin/src/HAL/DUE/u8g/LCD_defines.h b/Marlin/src/HAL/DUE/u8g/LCD_defines.h
new file mode 100644
index 0000000000..e85f13514f
--- /dev/null
+++ b/Marlin/src/HAL/DUE/u8g/LCD_defines.h
@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * DUE (SAM3X8E) LCD-specific defines
+ */
+
+uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+
+#define U8G_COM_HAL_SW_SPI_FN     u8g_com_HAL_DUE_sw_spi_fn
+#define U8G_COM_HAL_HW_SPI_FN     u8g_com_HAL_DUE_shared_hw_spi_fn
+#define U8G_COM_ST7920_HAL_SW_SPI u8g_com_HAL_DUE_ST7920_sw_spi_fn
diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_shared_hw_spi.cpp
similarity index 100%
rename from Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
rename to Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_shared_hw_spi.cpp
diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp b/Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_st7920_sw_spi.cpp
similarity index 100%
rename from Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp
rename to Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_st7920_sw_spi.cpp
diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp b/Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_sw_spi.cpp
similarity index 100%
rename from Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp
rename to Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_sw_spi.cpp
diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp b/Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_sw_spi_shared.cpp
similarity index 100%
rename from Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp
rename to Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_sw_spi_shared.cpp
diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h b/Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_sw_spi_shared.h
similarity index 100%
rename from Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h
rename to Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_sw_spi_shared.h
diff --git a/Marlin/src/HAL/ESP32/inc/Conditionals_LCD.h b/Marlin/src/HAL/ESP32/inc/Conditionals_LCD.h
index 5f1c4b1601..07d2efe0bd 100644
--- a/Marlin/src/HAL/ESP32/inc/Conditionals_LCD.h
+++ b/Marlin/src/HAL/ESP32/inc/Conditionals_LCD.h
@@ -20,3 +20,7 @@
  *
  */
 #pragma once
+
+#if ANY(MKS_MINI_12864, FYSETC_MINI_12864_2_1)
+  #define U8G_HW_SPI_ESP32 1
+#endif
diff --git a/Marlin/src/HAL/ESP32/u8g/LCD_defines.h b/Marlin/src/HAL/ESP32/u8g/LCD_defines.h
new file mode 100644
index 0000000000..3696d60d7c
--- /dev/null
+++ b/Marlin/src/HAL/ESP32/u8g/LCD_defines.h
@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * ESP32 LCD-specific defines
+ */
+
+uint8_t u8g_esp32_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+#define U8G_COM_HAL_HW_SPI_FN u8g_esp32_hw_spi_fn
diff --git a/Marlin/src/HAL/ESP32/u8g_esp32_spi.cpp b/Marlin/src/HAL/ESP32/u8g_esp32_spi.cpp
index 012604dbfb..a4c1980adc 100644
--- a/Marlin/src/HAL/ESP32/u8g_esp32_spi.cpp
+++ b/Marlin/src/HAL/ESP32/u8g_esp32_spi.cpp
@@ -25,7 +25,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ANY(MKS_MINI_12864, FYSETC_MINI_12864_2_1)
+#if U8G_HW_SPI_ESP32
 
 #include <U8glib-HAL.h>
 #include "../shared/HAL_SPI.h"
@@ -41,7 +41,6 @@
 
 static SPISettings spiConfig;
 
-
 #ifndef LCD_SPI_SPEED
   #ifdef SD_SPI_SPEED
     #define LCD_SPI_SPEED SD_SPI_SPEED    // Assume SPI speed shared with SD
@@ -50,7 +49,7 @@ static SPISettings spiConfig;
   #endif
 #endif
 
-uint8_t u8g_eps_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
+uint8_t u8g_esp32_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
   static uint8_t msgInitCount = 2; // Ignore all messages until 2nd U8G_COM_MSG_INIT
 
   #if ENABLED(PAUSE_LCD_FOR_BUSY_SD)
@@ -101,6 +100,5 @@ uint8_t u8g_eps_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_pt
   return 1;
 }
 
-#endif // MKS_MINI_12864 || FYSETC_MINI_12864_2_1
-
+#endif // U8G_HW_SPI_ESP32
 #endif // ARDUINO_ARCH_ESP32
diff --git a/Marlin/src/HAL/HC32/u8g/LCD_defines.h b/Marlin/src/HAL/HC32/u8g/LCD_defines.h
new file mode 100644
index 0000000000..8dc94bca7f
--- /dev/null
+++ b/Marlin/src/HAL/HC32/u8g/LCD_defines.h
@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * HC32 LCD-specific defines
+ */
diff --git a/Marlin/src/HAL/LINUX/u8g/LCD_defines.h b/Marlin/src/HAL/LINUX/u8g/LCD_defines.h
new file mode 100644
index 0000000000..6caa0240ca
--- /dev/null
+++ b/Marlin/src/HAL/LINUX/u8g/LCD_defines.h
@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Linux LCD-specific defines
+ */
diff --git a/Marlin/src/HAL/LPC1768/Servo.h b/Marlin/src/HAL/LPC1768/Servo.h
index f02f503a67..221001c948 100644
--- a/Marlin/src/HAL/LPC1768/Servo.h
+++ b/Marlin/src/HAL/LPC1768/Servo.h
@@ -39,7 +39,6 @@
  * License along with this library; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
-#pragma once
 
 /**
  * Based on "servo.h - Interrupt driven Servo library for Arduino using 16 bit timers -
diff --git a/Marlin/src/HAL/LPC1768/u8g/LCD_defines.h b/Marlin/src/HAL/LPC1768/u8g/LCD_defines.h
index d2260037b6..5b58f1223a 100644
--- a/Marlin/src/HAL/LPC1768/u8g/LCD_defines.h
+++ b/Marlin/src/HAL/LPC1768/u8g/LCD_defines.h
@@ -25,25 +25,22 @@
  * LPC1768 LCD-specific defines
  */
 
-// The following are optional depending on the platform.
+#ifndef U8G_HAL_LINKS
 
-// definitions of HAL specific com and device drivers.
-uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+  #define U8G_COM_SSD_I2C_HAL u8g_com_arduino_ssd_i2c_fn  // See U8glib-HAL
 
+#else
 
-// connect U8g com generic com names to the desired driver
-#define U8G_COM_HW_SPI u8g_com_HAL_LPC1768_hw_spi_fn  // use LPC1768 specific hardware SPI routine
-#define U8G_COM_SW_SPI u8g_com_HAL_LPC1768_sw_spi_fn  // use LPC1768 specific software SPI routine
-#define U8G_COM_ST7920_HW_SPI u8g_com_HAL_LPC1768_ST7920_hw_spi_fn
-#define U8G_COM_ST7920_SW_SPI u8g_com_HAL_LPC1768_ST7920_sw_spi_fn
-#define U8G_COM_SSD_I2C u8g_com_HAL_LPC1768_ssd_hw_i2c_fn
+  uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+  uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+  uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+  uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+  uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
 
-// let these default for now
-#define U8G_COM_PARALLEL u8g_com_null_fn
-#define U8G_COM_T6963 u8g_com_null_fn
-#define U8G_COM_FAST_PARALLEL u8g_com_null_fn
-#define U8G_COM_UC_I2C u8g_com_null_fn
+  #define U8G_COM_HAL_SW_SPI_FN       u8g_com_HAL_LPC1768_sw_spi_fn
+  #define U8G_COM_HAL_HW_SPI_FN       u8g_com_HAL_LPC1768_hw_spi_fn
+  #define U8G_COM_ST7920_HAL_SW_SPI   u8g_com_HAL_LPC1768_ST7920_sw_spi_fn
+  #define U8G_COM_ST7920_HAL_HW_SPI   u8g_com_HAL_LPC1768_ST7920_hw_spi_fn
+  #define U8G_COM_SSD_I2C_HAL         u8g_com_HAL_LPC1768_ssd_hw_i2c_fn
+
+#endif
diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp
index 0118f92847..406fc4840c 100644
--- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp
+++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp
@@ -125,5 +125,4 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
 }
 
 #endif // HAS_MARLINUI_U8GLIB
-
 #endif // TARGET_LPC1768
diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp
index bf76eaf0f4..3dea365ac7 100644
--- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp
+++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp
@@ -194,5 +194,4 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
 }
 
 #endif // HAS_MARLINUI_U8GLIB
-
 #endif // TARGET_LPC1768
diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
index ce7b338019..c029dc0680 100644
--- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
+++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
@@ -134,5 +134,4 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar
 }
 
 #endif // HAS_MARLINUI_U8GLIB
-
 #endif // TARGET_LPC1768
diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
index f6ed7b0e7e..4edd0d3886 100644
--- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
+++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
@@ -131,7 +131,7 @@ uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, const pin_t sck
 
 static uint8_t SPI_speed = 0;
 
-static void u8g_sw_spi_HAL_LPC1768_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
+static void u8g_sw_spi_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
   #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)
     swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin);
   #else
@@ -176,13 +176,13 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
       break;
 
     case U8G_COM_MSG_WRITE_BYTE:
-      u8g_sw_spi_HAL_LPC1768_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
+      u8g_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
       break;
 
     case U8G_COM_MSG_WRITE_SEQ: {
         uint8_t *ptr = (uint8_t *)arg_ptr;
         while (arg_val > 0) {
-          u8g_sw_spi_HAL_LPC1768_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], *ptr++);
+          u8g_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], *ptr++);
           arg_val--;
         }
       }
@@ -191,7 +191,7 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
       case U8G_COM_MSG_WRITE_SEQ_P: {
         uint8_t *ptr = (uint8_t *)arg_ptr;
         while (arg_val > 0) {
-          u8g_sw_spi_HAL_LPC1768_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], u8g_pgm_read(ptr));
+          u8g_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], u8g_pgm_read(ptr));
           ptr++;
           arg_val--;
         }
diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_defines.h b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_defines.h
index 2a50eddcd4..63701ca334 100644
--- a/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_defines.h
+++ b/Marlin/src/HAL/NATIVE_SIM/u8g/LCD_defines.h
@@ -21,22 +21,14 @@
  */
 #pragma once
 
-void usleep(uint64_t microsec);
-// The following are optional depending on the platform.
+/**
+ * Native/Simulator LCD-specific defines
+ */
+
+void usleep(uint64_t microsec);
 
-// definitions of HAL specific com and device drivers.
 uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
 uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
 
-// connect U8g com generic com names to the desired driver
-#define U8G_COM_SW_SPI u8g_com_sw_spi_fn
-#define U8G_COM_ST7920_SW_SPI u8g_com_ST7920_sw_spi_fn
-
-// let these default for now
-#define U8G_COM_HW_SPI u8g_com_null_fn
-#define U8G_COM_ST7920_HW_SPI u8g_com_null_fn
-#define U8G_COM_SSD_I2C u8g_com_null_fn
-#define U8G_COM_PARALLEL u8g_com_null_fn
-#define U8G_COM_T6963 u8g_com_null_fn
-#define U8G_COM_FAST_PARALLEL u8g_com_null_fn
-#define U8G_COM_UC_I2C u8g_com_null_fn
+#define U8G_COM_HAL_SW_SPI_FN       u8g_com_sw_spi_fn
+#define U8G_COM_ST7920_HAL_SW_SPI   u8g_com_ST7920_sw_spi_fn
diff --git a/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_st7920_sw_spi.cpp b/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_st7920_sw_spi.cpp
index a3254774bf..46f2798afa 100644
--- a/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_st7920_sw_spi.cpp
+++ b/Marlin/src/HAL/NATIVE_SIM/u8g/u8g_com_st7920_sw_spi.cpp
@@ -100,6 +100,7 @@ static void u8g_com_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val) {
   swSpiTransfer(val & 0x0F0, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
   swSpiTransfer(val << 4, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
 }
+
 #ifdef __cplusplus
   extern "C" {
 #endif
@@ -128,7 +129,7 @@ uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
       break;
 
     case U8G_COM_MSG_RESET:
-       if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+      if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
       break;
 
     case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
@@ -163,6 +164,7 @@ uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   }
   return 1;
 }
+
 #ifdef __cplusplus
   }
 #endif
diff --git a/Marlin/src/HAL/SAMD21/u8g/LCD_defines.h b/Marlin/src/HAL/SAMD21/u8g/LCD_defines.h
index fa98725d22..d6fe93117b 100644
--- a/Marlin/src/HAL/SAMD21/u8g/LCD_defines.h
+++ b/Marlin/src/HAL/SAMD21/u8g/LCD_defines.h
@@ -19,23 +19,11 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
-/**
- * SAMD21 HAL developed by Bart Meijer (brupje)
- * Based on SAMD51 HAL by Giuliano Zaro (AKA GMagician)
- */
 #pragma once
 
 /**
  * SAMD21 LCD-specific defines
  */
 
-// The following are optional depending on the platform.
-
-// definitions of HAL specific com and device drivers.
-uint8_t u8g_com_samd21_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
 uint8_t u8g_com_samd21_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-
-// connect U8g com generic com names to the desired driver
-#define U8G_COM_HW_SPI u8g_com_samd21_st7920_hw_spi_fn  // use SAMD21 specific hardware SPI routine
-#define U8G_COM_ST7920_HW_SPI u8g_com_samd21_st7920_hw_spi_fn
+#define U8G_COM_ST7920_HAL_HW_SPI u8g_com_samd21_st7920_hw_spi_fn
diff --git a/Marlin/src/HAL/SAMD51/u8g/LCD_defines.h b/Marlin/src/HAL/SAMD51/u8g/LCD_defines.h
new file mode 100644
index 0000000000..658a2c0fc1
--- /dev/null
+++ b/Marlin/src/HAL/SAMD51/u8g/LCD_defines.h
@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * SAMD51 LCD-specific defines
+ */
+
+#define U8G_COM_HAL_HW_SPI_FN     u8g_com_samd51_hw_spi_fn        // See U8glib-HAL
+#define U8G_COM_ST7920_HAL_HW_SPI u8g_com_samd51_st7920_hw_spi_fn // See U8glib-HAL
diff --git a/Marlin/src/HAL/STM32/u8g/LCD_defines.h b/Marlin/src/HAL/STM32/u8g/LCD_defines.h
new file mode 100644
index 0000000000..35f1674d69
--- /dev/null
+++ b/Marlin/src/HAL/STM32/u8g/LCD_defines.h
@@ -0,0 +1,32 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * STM32 LCD-specific defines
+ */
+
+uint8_t u8g_com_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);         // See U8glib-HAL
+uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);  // See U8glib-HAL
+
+#define U8G_COM_HAL_SW_SPI_FN u8g_com_std_sw_spi_fn
+#define U8G_COM_HAL_HW_SPI_FN u8g_com_stm32duino_hw_spi_fn
diff --git a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
index c57350aa2e..fc421897c4 100644
--- a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
+++ b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
@@ -88,7 +88,7 @@ static inline uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, c
   return b;
 }
 
-static void u8g_sw_spi_HAL_STM32F1_shift_out(uint8_t val) {
+static void u8g_sw_spi_shift_out(uint8_t val) {
   #if ENABLED(FYSETC_MINI_12864)
     swSpiTransfer_mode_3(val, SPI_speed);
   #else
@@ -139,13 +139,13 @@ uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
       break;
 
     case U8G_COM_MSG_WRITE_BYTE:
-      u8g_sw_spi_HAL_STM32F1_shift_out(arg_val);
+      u8g_sw_spi_shift_out(arg_val);
       break;
 
     case U8G_COM_MSG_WRITE_SEQ: {
       uint8_t *ptr = (uint8_t *)arg_ptr;
       while (arg_val > 0) {
-        u8g_sw_spi_HAL_STM32F1_shift_out(*ptr++);
+        u8g_sw_spi_shift_out(*ptr++);
         arg_val--;
       }
     } break;
@@ -153,7 +153,7 @@ uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
     case U8G_COM_MSG_WRITE_SEQ_P: {
       uint8_t *ptr = (uint8_t *)arg_ptr;
       while (arg_val > 0) {
-        u8g_sw_spi_HAL_STM32F1_shift_out(u8g_pgm_read(ptr));
+        u8g_sw_spi_shift_out(u8g_pgm_read(ptr));
         ptr++;
         arg_val--;
       }
diff --git a/Marlin/src/HAL/STM32F1/u8g/LCD_defines.h b/Marlin/src/HAL/STM32F1/u8g/LCD_defines.h
new file mode 100644
index 0000000000..4bd461cb39
--- /dev/null
+++ b/Marlin/src/HAL/STM32F1/u8g/LCD_defines.h
@@ -0,0 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * STM32F1 (Maple) LCD-specific defines
+ */
+
+uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);  // See U8glib-HAL
+
+#define U8G_COM_HAL_SW_SPI_FN     u8g_com_HAL_STM32F1_sw_spi_fn
+#define U8G_COM_HAL_HW_SPI_FN     u8g_com_stm32duino_hw_spi_fn  // See U8glib-HAL
+#define U8G_COM_ST7920_HAL_SW_SPI u8g_com_std_sw_spi_fn         // See U8glib-HAL
+#define U8G_COM_ST7920_HAL_HW_SPI u8g_com_stm32duino_hw_spi_fn  // See U8glib-HAL
diff --git a/Marlin/src/HAL/TEENSY31_32/u8g/LCD_defines.h b/Marlin/src/HAL/TEENSY31_32/u8g/LCD_defines.h
new file mode 100644
index 0000000000..a13e7e837f
--- /dev/null
+++ b/Marlin/src/HAL/TEENSY31_32/u8g/LCD_defines.h
@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Teensy 3.1/3.2 LCD-specific defines
+ */
diff --git a/Marlin/src/HAL/TEENSY35_36/u8g/LCD_defines.h b/Marlin/src/HAL/TEENSY35_36/u8g/LCD_defines.h
new file mode 100644
index 0000000000..511085781c
--- /dev/null
+++ b/Marlin/src/HAL/TEENSY35_36/u8g/LCD_defines.h
@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Teensy 3.5/3.6 LCD-specific defines
+ */
diff --git a/Marlin/src/HAL/TEENSY40_41/u8g/LCD_defines.h b/Marlin/src/HAL/TEENSY40_41/u8g/LCD_defines.h
new file mode 100644
index 0000000000..349f8c0399
--- /dev/null
+++ b/Marlin/src/HAL/TEENSY40_41/u8g/LCD_defines.h
@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Teensy 4.0/4.1 LCD-specific defines
+ */
diff --git a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
index 6df6413158..a70e2b7b8b 100644
--- a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
+++ b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
@@ -21,117 +21,35 @@
  */
 #pragma once
 
-// Use this file to select the com driver for device drivers that are NOT in the U8G library
+/**
+ * Assign custom or standard U8G device drivers
+ */
 
 #include <U8glib-HAL.h>
 
-#ifndef U8G_HAL_LINKS   // Defined by LPC1768/9 environments in platform.ini
+#include HAL_PATH(../.., u8g/LCD_defines.h)
 
-  #ifdef __SAM3X8E__
-
-    uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    #define U8G_COM_HAL_SW_SPI_FN     u8g_com_HAL_DUE_sw_spi_fn
-    #define U8G_COM_HAL_HW_SPI_FN     u8g_com_HAL_DUE_shared_hw_spi_fn
-    #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_HAL_DUE_ST7920_sw_spi_fn
-
-  #elif defined(__SAMD51__)
-
-    #define U8G_COM_HAL_HW_SPI_FN     u8g_com_samd51_hw_spi_fn
-    #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_samd51_st7920_hw_spi_fn
-
-  #elif defined(__SAMD21__)
-
-    uint8_t u8g_com_samd21_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_samd21_st7920_hw_spi_fn
-
-  #elif defined(__STM32F1__)
-
-    uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    #define U8G_COM_HAL_SW_SPI_FN     u8g_com_HAL_STM32F1_sw_spi_fn
-    #define U8G_COM_HAL_HW_SPI_FN     u8g_com_stm32duino_hw_spi_fn
-    #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_std_sw_spi_fn
-    #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_stm32duino_hw_spi_fn
-
-  #elif defined(ARDUINO_ARCH_STM32)
-
-    uint8_t u8g_com_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    #define U8G_COM_HAL_SW_SPI_FN     u8g_com_std_sw_spi_fn
-    #define U8G_COM_HAL_HW_SPI_FN     u8g_com_stm32duino_hw_spi_fn
-
-  #elif defined(ESP32)
-
-    uint8_t u8g_eps_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    #define U8G_COM_HAL_HW_SPI_FN     u8g_eps_hw_spi_fn
-
-  #elif defined(__AVR__)
-
-    uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-    #define U8G_COM_HAL_SW_SPI_FN     u8g_com_HAL_AVR_sw_sp_fn
-
-  #endif
-
-  #ifndef U8G_COM_HAL_SW_SPI_FN
-    #define U8G_COM_HAL_SW_SPI_FN     u8g_com_arduino_std_sw_spi_fn
-  #endif
-  #ifndef U8G_COM_HAL_HW_SPI_FN
-    #define U8G_COM_HAL_HW_SPI_FN     u8g_com_arduino_hw_spi_fn
-  #endif
-  #ifndef U8G_COM_ST7920_HAL_SW_SPI
-    #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_arduino_st7920_spi_fn
-  #endif
-  #ifndef U8G_COM_ST7920_HAL_HW_SPI
-    #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_arduino_st7920_hw_spi_fn
-  #endif
-
-  // This can't be invoked from the current platformio.ini
-  #ifdef TARGET_LPC1768
-    uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  #endif
-
-  #define U8G_COM_SSD_I2C_HAL         u8g_com_arduino_ssd_i2c_fn
-
-#elif defined(TARGET_LPC1768)
-
-  uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  #define U8G_COM_HAL_SW_SPI_FN       u8g_com_HAL_LPC1768_sw_spi_fn
-  #define U8G_COM_HAL_HW_SPI_FN       u8g_com_HAL_LPC1768_hw_spi_fn
-  #define U8G_COM_ST7920_HAL_SW_SPI   u8g_com_HAL_LPC1768_ST7920_sw_spi_fn
-  #define U8G_COM_ST7920_HAL_HW_SPI   u8g_com_HAL_LPC1768_ST7920_hw_spi_fn
-  #define U8G_COM_SSD_I2C_HAL         u8g_com_HAL_LPC1768_ssd_hw_i2c_fn
-
-#elif defined(__PLAT_NATIVE_SIM__)
-  uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  uint8_t u8g_com_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  #define U8G_COM_HAL_SW_SPI_FN       u8g_com_sw_spi_fn
-  #define U8G_COM_ST7920_HAL_SW_SPI   u8g_com_ST7920_sw_spi_fn
-#endif
-
-#ifndef U8G_COM_HAL_SW_SPI_FN
-  #define U8G_COM_HAL_SW_SPI_FN     u8g_com_null_fn
-#endif
-#ifndef U8G_COM_HAL_HW_SPI_FN
-  #define U8G_COM_HAL_HW_SPI_FN     u8g_com_null_fn
-#endif
-#ifndef U8G_COM_ST7920_HAL_SW_SPI
-  #define U8G_COM_ST7920_HAL_SW_SPI u8g_com_null_fn
-#endif
-#ifndef U8G_COM_ST7920_HAL_HW_SPI
-  #define U8G_COM_ST7920_HAL_HW_SPI u8g_com_null_fn
-#endif
-#ifndef U8G_COM_SSD_I2C_HAL
-  #define U8G_COM_SSD_I2C_HAL       u8g_com_null_fn
-#endif
 #if HAS_FSMC_GRAPHICAL_TFT || HAS_SPI_GRAPHICAL_TFT || HAS_LTDC_GRAPHICAL_TFT
   uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  #define U8G_COM_HAL_TFT_FN       u8g_com_hal_tft_fn
-#else
-  #define U8G_COM_HAL_TFT_FN       u8g_com_null_fn
+  #define U8G_COM_HAL_TFT_FN u8g_com_hal_tft_fn
+#endif
+
+// U8G_HAL_LINKS is defined for LPC1768/9 and Native envs by -DU8G_HAL_LINKS in platform.ini
+#ifndef U8G_COM_HAL_SW_SPI_FN
+  #define U8G_COM_HAL_SW_SPI_FN     TERN(U8G_HAL_LINKS, u8g_com_null_fn, u8g_com_arduino_std_sw_spi_fn)
+#endif
+#ifndef U8G_COM_HAL_HW_SPI_FN
+  #define U8G_COM_HAL_HW_SPI_FN     TERN(U8G_HAL_LINKS, u8g_com_null_fn, u8g_com_arduino_hw_spi_fn)
+#endif
+#ifndef U8G_COM_ST7920_HAL_SW_SPI
+  #define U8G_COM_ST7920_HAL_SW_SPI TERN(U8G_HAL_LINKS, u8g_com_null_fn, u8g_com_arduino_st7920_spi_fn)
+#endif
+#ifndef U8G_COM_ST7920_HAL_HW_SPI
+  #define U8G_COM_ST7920_HAL_HW_SPI TERN(U8G_HAL_LINKS, u8g_com_null_fn, u8g_com_arduino_st7920_hw_spi_fn)
+#endif
+#ifndef U8G_COM_SSD_I2C_HAL
+  #define U8G_COM_SSD_I2C_HAL       TERN(U8G_HAL_LINKS, u8g_com_null_fn, u8g_com_arduino_ssd_i2c_fn)
+#endif
+#ifndef U8G_COM_HAL_TFT_FN
+  #define U8G_COM_HAL_TFT_FN        u8g_com_null_fn
 #endif
diff --git a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
index e844eee251..11cd7b14ba 100644
--- a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
+++ b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
@@ -20,12 +20,12 @@
  *
  */
 
-// NOTE - the HAL version of the rrd device uses a generic ST7920 device.  See the
-// file u8g_dev_st7920_128x64_HAL.cpp for the HAL version.
+// NOTE - the HAL version of the rrd device uses a generic ST7920 device.
+// See u8g_dev_st7920_128x64_HAL.cpp for the HAL version.
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if !defined(U8G_HAL_LINKS) && ANY(__AVR__, ARDUINO_ARCH_STM32, ARDUINO_ARCH_ESP32)
+#if ANY(__AVR__, ARDUINO_ARCH_STM32, ARDUINO_ARCH_ESP32)
 
 #include "../../inc/MarlinConfig.h"
 
@@ -193,4 +193,4 @@ u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = { u8g_dev_rrd_st7920_128x64_fn, &u8
 #endif
 
 #endif // IS_U8GLIB_ST7920
-#endif // !U8G_HAL_LINKS && (__AVR__ || ARDUINO_ARCH_STM32 || ARDUINO_ARCH_ESP32)
+#endif // __AVR__ || ARDUINO_ARCH_STM32 || ARDUINO_ARCH_ESP32