Move M145 to cpp

Marlin/src/gcode/lcd/M145.cpp

@@ -0,0 +1,63 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(ULTIPANEL)
+
+#include "../gcode.h"
+#include "../../lcd/ultralcd.h"
+
+/**
+ * M145: Set the heatup state for a material in the LCD menu
+ *
+ *   S<material> (0=PLA, 1=ABS)
+ *   H<hotend temp>
+ *   B<bed temp>
+ *   F<fan speed>
+ */
+void GcodeSuite::M145() {
+  const uint8_t material = (uint8_t)parser.intval('S');
+  if (material >= COUNT(lcd_preheat_hotend_temp)) {
+    SERIAL_ERROR_START();
+    SERIAL_ERRORLNPGM(MSG_ERR_MATERIAL_INDEX);
+  }
+  else {
+    int v;
+    if (parser.seenval('H')) {
+      v = parser.value_int();
+      lcd_preheat_hotend_temp[material] = constrain(v, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - 15);
+    }
+    if (parser.seenval('F')) {
+      v = parser.value_int();
+      lcd_preheat_fan_speed[material] = constrain(v, 0, 255);
+    }
+    #if TEMP_SENSOR_BED != 0
+      if (parser.seenval('B')) {
+        v = parser.value_int();
+        lcd_preheat_bed_temp[material] = constrain(v, BED_MINTEMP, BED_MAXTEMP - 15);
+      }
+    #endif
+  }
+}
+
+#endif // ULTIPANEL