From f25dccd6d17364d6405144555463a361a3183238 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 24 Sep 2017 16:52:18 -0500 Subject: [PATCH] Disable BABYSTEP_XY by default in all configs --- Marlin/Configuration.h | 2 +- Marlin/Configuration_adv.h | 4 ++-- .../AlephObjects/TAZ4/Configuration_adv.h | 2 +- Marlin/example_configurations/Anet/A6/Configuration_adv.h | 2 +- Marlin/example_configurations/Anet/A8/Configuration_adv.h | 2 +- .../example_configurations/BQ/Hephestos/Configuration_adv.h | 2 +- .../example_configurations/BQ/Hephestos_2/Configuration_adv.h | 2 +- Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h | 2 +- Marlin/example_configurations/Cartesio/Configuration_adv.h | 2 +- Marlin/example_configurations/Felix/Configuration_adv.h | 2 +- .../Folger Tech/i3-2020/Configuration_adv.h | 2 +- .../Infitary/i3-M508/Configuration_adv.h | 2 +- Marlin/example_configurations/Malyan/M150/Configuration_adv.h | 2 +- Marlin/example_configurations/RigidBot/Configuration_adv.h | 2 +- Marlin/example_configurations/SCARA/Configuration_adv.h | 2 +- Marlin/example_configurations/Sanguinololu/Configuration.h | 2 +- .../example_configurations/Sanguinololu/Configuration_adv.h | 2 +- Marlin/example_configurations/TinyBoy2/Configuration_adv.h | 2 +- .../example_configurations/Velleman/K8200/Configuration_adv.h | 2 +- .../example_configurations/Velleman/K8400/Configuration_adv.h | 2 +- .../delta/FLSUN/kossel_mini/Configuration_adv.h | 2 +- .../example_configurations/delta/generic/Configuration_adv.h | 2 +- .../delta/kossel_mini/Configuration_adv.h | 2 +- .../delta/kossel_pro/Configuration_adv.h | 2 +- .../delta/kossel_xl/Configuration_adv.h | 2 +- .../gCreate/gMax1.5+/Configuration_adv.h | 2 +- Marlin/example_configurations/makibox/Configuration_adv.h | 2 +- .../example_configurations/tvrrug/Round2/Configuration_adv.h | 2 +- Marlin/example_configurations/wt150/Configuration_adv.h | 2 +- 29 files changed, 30 insertions(+), 30 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 2680e59abf..cc6b5546b4 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -181,7 +181,7 @@ */ //#define PARKING_EXTRUDER #if ENABLED(PARKING_EXTRUDER) - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid not magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 0c8c49aee4..2ca25194ee 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -222,7 +222,7 @@ /** * Part-Cooling Fan Multiplexer - * + * * This feature allows you to digitally multiplex the fan output. * The multiplexer is automatically switched at tool-change. * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index 1bf69e4236..a13ee782ec 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index 540745cba8..65c3d5de3a 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index cad744497e..c45bbb1bc6 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index 49721bfcbf..11f2a6f37c 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index fccbc2bf80..a7022dc2f1 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index 49721bfcbf..11f2a6f37c 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 1865befb78..ba36abe8ab 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index f0ba0b3b20..14f4505a28 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h index 0ed2b6f952..44664979fb 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h @@ -601,7 +601,7 @@ */ #define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 2 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index af1f64aaf3..e0d95b7fff 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index 165e360663..0e96feb0af 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index b292cff4b7..9235ab2053 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index edc0b1984b..c4c8b37152 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h index 0e020ccfa2..a2427c32ad 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration.h @@ -181,7 +181,7 @@ */ //#define PARKING_EXTRUDER #if ENABLED(PARKING_EXTRUDER) - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid not magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h index 4208010bb3..b9a7cca4f6 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h @@ -590,7 +590,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index 6a39ff0b23..9d0d24888c 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h index 1899f6c2dd..fbbf602caa 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -614,7 +614,7 @@ */ #define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index fdd2234c00..e3622028d6 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index ab61f894ea..5181131148 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -603,7 +603,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index ab61f894ea..5181131148 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -603,7 +603,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index ab61f894ea..5181131148 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -603,7 +603,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index eaf884557a..3f2180eb09 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -608,7 +608,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index daf5f0f1a3..edc24a8d60 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -603,7 +603,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index acd3f9e212..43f11ac8fd 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -601,7 +601,7 @@ */ #define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 364d0b8c1c..a72fa661be 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index e57dda58d8..267293196c 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index 6c66899ce7..48c57534b8 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -601,7 +601,7 @@ */ //#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping