sravan/Marlin-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

✨ XY_AFTER_HOMING, EVENT_GCODE_AFTER_HOMING (#26469)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
mikemerryguy
2023-11-28 18:55:21 -05:00
committed by GitHub
parent dabcd65903
commit f4228cc4c1
3 changed files with 18 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
Marlin/Configuration.h
View File

@@ -1758,10 +1758,13 @@
*/
//#define Z_IDLE_HEIGHT Z_HOME_POS
//#define Z_CLEARANCE_FOR_HOMING 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
//#define Z_CLEARANCE_FOR_HOMING 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
// You'll need this much clearance above Z_MAX_POS to avoid grinding.
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing (if Z was homed)
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing (if Z was homed)
//#define XY_AFTER_HOMING { 10, 10 } // (mm) Move to an XY position after homing (and raising Z)
//#define EVENT_GCODE_AFTER_HOMING "M300 P440 S200" // Commands to run after G28 (and move to XY_AFTER_HOMING)
// Direction of endstops when homing; 1=MAX, -1=MIN
// :[-1,1]
@@ -2246,8 +2249,8 @@
//#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
#define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing
#define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing
#define Z_SAFE_HOMING_Y_POINT Y_CENTER // (mm) Y point for Z homing
//#define Z_SAFE_HOMING_POINT_ABSOLUTE // Ignore home offsets (M206) for Z homing position
#endif