diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 6c29d4cb26..a241265c38 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 1c23d08c2f..7b0c49dc63 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2417,8 +2417,8 @@ static void clean_up_after_endstop_or_probe_move() {
       ny -= (Y_PROBE_OFFSET_FROM_EXTRUDER);
     }
     else if (!position_is_reachable(nx, ny)) return NAN;        // The given position is in terms of the nozzle
-  
-    const float nz = 
+
+    const float nz =
       #if ENABLED(DELTA)
         // Move below clip height or xy move will be aborted by do_blocking_move_to
         min(current_position[Z_AXIS], delta_clip_start_height)
@@ -3446,7 +3446,7 @@ inline void gcode_G0_G1(
     #else
       prepare_move_to_destination();
     #endif
-	
+
     #if ENABLED(NANODLP_Z_SYNC)
       // If G0/G1 command include Z-axis, wait for move and output sync text.
       if (parser.seenval('Z')) {
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index 3b7ce1f1f8..8db7d3515e 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index f7d14749e1..fce1386dd5 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index 806a690dbb..9e81dd2d6c 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index b4a9020787..8681aca122 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index 695963d7aa..23beb7fa64 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -1505,10 +1505,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index b4a9020787..8681aca122 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index f8c146d71d..44bffa75f0 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index 57b0364618..a64a46b68f 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -1511,10 +1511,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 3f8715952d..3a8e8b6ef8 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index 0bf71a93a2..8828b9e577 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index 96c5bbabfb..12cd0dbf84 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index 35394d0695..7d5b733893 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -1505,10 +1505,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index 715583a32e..7fbc77c8eb 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -1509,10 +1509,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 324760ebe6..d1413213d9 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index d80ca0daa9..7c79955e2f 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index 2bc79c2316..37df22e6c2 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -1475,10 +1475,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index 4c2cc6d17a..a0ae3dead0 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index ab4a86340d..10512609e8 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -1516,10 +1516,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index 0b654ae673..728c554fe2 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 02a416b2cc..b3c9d71b36 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1510,10 +1510,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index d2353a9ef2..3d1c072361 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1510,10 +1510,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index d2353a9ef2..3d1c072361 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -1510,10 +1510,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index d2353a9ef2..3d1c072361 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -1510,10 +1510,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index e72fab3a3c..c8dc04f9b5 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -1515,10 +1515,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index 1bc7f8fe8d..172458902b 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -1510,10 +1510,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index 1ac7df4f3f..e7566d583f 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -1509,10 +1509,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 97d50188d0..3ad0babf81 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 6ebd125040..1acaef4e8b 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -1508,10 +1508,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index 5aa391a8cc..891a85cf9f 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -1498,10 +1498,10 @@
 /**
  * NanoDLP Sync support
  *
- * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" 
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
  * string to enable synchronization with DLP projector exposure. This change will allow to use
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
- 
+
 #endif // CONFIGURATION_ADV_H