6742026568
Followup for 6 extruders
2018-09-24 14:36:50 -04:00
04bdff4115
Add a blank line
2018-09-24 12:49:02 -04:00
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW ( #11905 )
2018-09-24 00:43:43 -04:00
849dea92a8
Move probe extras below probe types
2018-09-23 23:23:07 -04:00
a4cdffdd69
Support for manually deployed fixed probes ( #11899 )
2018-09-23 19:59:08 -04:00
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors ( #11861 )
2018-09-18 01:10:41 -05:00
f5c210d33d
Config changes supporting up to 6 extruders
2018-09-16 22:22:35 -05:00
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
e25d2ae4a2
[2.0.x] SWITCHING_TOOLHEAD ( #11623 )
2018-09-08 01:43:24 -05:00
2a61c9a939
Various fixups to configs, spacing, etc.
2018-09-06 06:44:31 -05:00
3e81745e81
Fix issues, make optional
2018-08-29 17:58:02 -05:00
66966dbd69
Tweak comments for newer multiplexer
2018-08-25 17:00:49 -05:00
6483285bc5
HOTEND_OFFSET_Z always available ( #11603 )
2018-08-22 00:21:29 -05:00
bd6d032628
Update default driver configuration
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi >
2018-08-14 18:42:04 -05:00
846bd24eb9
MALYAN_LCD is ok without SD
2018-08-14 05:31:47 -05:00
a1a5367380
Smoothieboard V1.0/1.1 and A5984 support
2018-08-09 23:03:17 -05:00
bd3ec66a78
[2.0.x] typo fix ( #11365 )
...
Typo fix
2018-07-25 18:00:47 -05:00
fbcdf5eaeb
Simplify stepper driver per-axis selection
2018-07-25 02:47:43 -05:00
14e2b11195
Fix spelling in configs
2018-07-24 21:03:38 -05:00
2106fa26b1
Add MANUAL_PROBE_START_Z for manual probing
2018-07-18 21:49:20 -05:00
25e2ca8896
Add Z_CLEARANCE_MULTI_PROBE
...
Co-Authored-By: nightgryphon <ngryph@gmail.com >
2018-07-12 22:46:34 -05:00
cbea385ed7
[2.0.x] Fix LCD_LANGUAGE options list formatting in config ( #11198 )
...
* Fix LCD_LANGUAGE options list formatting in config
* Remove 'cn' language option from list
2018-07-04 17:42:14 -05:00
568cfe7caa
Add thermistor 501 (100K Zonestar)
2018-07-03 17:52:06 -05:00
6f14bcaa3e
Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
...
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
2018-06-10 16:02:47 -05:00
aaaf09bda2
BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION
2018-05-26 18:33:51 -05:00
4b2f6e3b2b
[2.0.x] Add endstop noise filter ( #10796 )
2018-05-21 15:51:38 -05:00
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it ( #10748 )
2018-05-14 21:38:24 -05:00
e978e6e782
[2.0.x] Arrange LCD options by type ( #10630 )
2018-05-06 19:16:55 -05:00
e911635fb1
Add thermocouple with AD8495 support
2018-05-02 08:43:16 -05:00
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
2018-05-01 07:13:56 -05:00
c87b0e21be
Add units to probe speed comments
2018-04-30 23:50:28 -05:00
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
2018-04-30 21:16:31 -05:00
9e07df5c1b
Extra options for LEVEL_BED_CORNERS ( #10483 )
2018-04-22 02:50:48 -05:00
a90cbc6339
[2.0.x] Wait for bed heaters between probing ( #10472 )
2018-04-21 15:43:21 -05:00
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops ( #10389 )
2018-04-13 00:24:09 -05:00
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
2018-04-12 20:14:01 -05:00
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
2018-04-09 17:23:03 -05:00
dca69efc11
Update Bed PID comments
2018-04-08 06:44:47 -05:00
a29adde5c0
Implement BEZIER_JERK_CONTROL
...
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
2018-04-07 21:03:28 -05:00
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:06 -05:00
adcb87f0db
Z Endstop Servo => Z Probe Servo
2018-04-01 23:54:21 -05:00
dd2949922b
Consolidate 3-point leveling point options
2018-03-19 04:12:20 -05:00
c6ff39cc14
Spacing cleanup
2018-03-17 16:49:08 -05:00
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
2018-03-10 00:17:34 -06:00
a2a672449a
Updated boot screen description
2018-03-03 20:04:17 -06:00
4953fb1c88
Standardize encoder defaults
2018-02-24 22:34:45 -06:00
5684beae90
Bring some configs up to speed
2018-02-24 21:56:27 -06:00
2024775e07
Spanish (UTF8) Language ( #9786 )
...
From #7314 by @MrAmericanMike
2018-02-23 20:24:02 -06:00
