Config Updates

- Enable preheat before leveling @ 60C - Change bed preheat temp to 60C - Change display charset to western - Enable SD check and retry
Ender 3 Pro w/ Creality V4.2.7 Board Configuration
2024-07-14 08:43:05 -04:00 · 2024-07-14 06:48:38 -04:00 · 2024-06-15 20:45:26 -05:00 · 2024-06-15 20:28:43 -05:00 · 2024-06-15 20:28:43 -05:00 · 2024-06-15 20:28:43 -05:00
42 changed files with 2676 additions and 2492 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -21,6 +21,8 @@
 */
 #pragma once

+#define CONFIG_EXAMPLES_DIR "config/examples/Creality/Ender-3 Pro/CrealityV427"
+
 /**
 * Configuration.h
 *
@@ -35,7 +37,7 @@
 *
 * Advanced settings can be found in Configuration_adv.h
 */
-#define CONFIGURATION_H_VERSION 02010203
+#define CONFIGURATION_H_VERSION 02010204

 //===========================================================================
 //============================= Getting Started =============================
@@ -61,7 +63,7 @@
 // @section info

 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(Dust, Ender-3 Pro)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)

 /**
@@ -79,16 +81,16 @@
 #define SHOW_BOOTSCREEN

 // Show the bitmap in Marlin/_Bootscreen.h on startup.
-//#define SHOW_CUSTOM_BOOTSCREEN
+#define SHOW_CUSTOM_BOOTSCREEN

 // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
-//#define CUSTOM_STATUS_SCREEN_IMAGE
+#define CUSTOM_STATUS_SCREEN_IMAGE

 // @section machine

 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_14_EFB
+#define MOTHERBOARD BOARD_CREALITY_V427
 #endif

 /**
@@ -99,7 +101,7 @@
 *
 * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
 */
-#define SERIAL_PORT 0
+#define SERIAL_PORT 1

 /**
 * Serial Port Baud Rate
@@ -112,7 +114,7 @@
 *
 * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
 */
-#define BAUDRATE 250000
+#define BAUDRATE 115200

 // #define BAUD_RATE_GCODE     // Enable G-code M575 to set the baud rate

@@ -136,7 +138,7 @@
 // #define BLUETOOTH

 // Name displayed in the LCD "Ready" message and Info menu
-//#define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "Ender-3 Pro 4.2.7"

 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -159,9 +161,9 @@
 *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
 * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
 */
-#define X_DRIVER_TYPE  A4988
-#define Y_DRIVER_TYPE  A4988
-#define Z_DRIVER_TYPE  A4988
+#define X_DRIVER_TYPE TMC2208_STANDALONE
+#define Y_DRIVER_TYPE TMC2208_STANDALONE
+#define Z_DRIVER_TYPE TMC2208_STANDALONE
 // #define X2_DRIVER_TYPE A4988
 // #define Y2_DRIVER_TYPE A4988
 // #define Z2_DRIVER_TYPE A4988
@@ -173,7 +175,7 @@
 // #define U_DRIVER_TYPE  A4988
 // #define V_DRIVER_TYPE  A4988
 // #define W_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE TMC2208_STANDALONE
 // #define E1_DRIVER_TYPE A4988
 // #define E2_DRIVER_TYPE A4988
 // #define E3_DRIVER_TYPE A4988
@@ -640,7 +642,7 @@
 #define HEATER_5_MAXTEMP 275
 #define HEATER_6_MAXTEMP 275
 #define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP      150
+#define BED_MAXTEMP 125
 #define CHAMBER_MAXTEMP 60

 /**
@@ -677,16 +679,17 @@
 // #define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
 //  Set/get with G-code: M301 E[extruder number, 0-2]

+// Creality Ender-3
 #if ENABLED(PID_PARAMS_PER_HOTEND)
 // Specify up to one value per hotend here, according to your setup.
 // If there are fewer values, the last one applies to the remaining hotends.
-    #define DEFAULT_Kp_LIST {  22.20,  22.20 }
-    #define DEFAULT_Ki_LIST {   1.08,   1.08 }
-    #define DEFAULT_Kd_LIST { 114.00, 114.00 }
+#define DEFAULT_Kp_LIST {21.73, 21.73}
+#define DEFAULT_Ki_LIST {1.54, 1.54}
+#define DEFAULT_Kd_LIST {76.55, 76.55}
 #else
-    #define DEFAULT_Kp  22.20
-    #define DEFAULT_Ki   1.08
-    #define DEFAULT_Kd 114.00
+#define DEFAULT_Kp 21.73
+#define DEFAULT_Ki 1.54
+#define DEFAULT_Kd 76.55
 #endif
 #else
 #define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current
@@ -833,8 +836,8 @@
 #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
                                // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.

-  //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
-  //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
+#define PID_EDIT_MENU     // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
+#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
 #endif

 // @section safety
@@ -1196,14 +1199,14 @@
 * Override with M92
 *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
 */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 93}

 /**
 * Default Max Feed Rate (linear=mm/s, rotational=°/s)
 * Override with M203
 *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
 */
-#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
+#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25}

 // #define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -1216,7 +1219,7 @@
 * Override with M201
 *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
 */
-#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
+#define DEFAULT_MAX_ACCELERATION {500, 500, 100, 5000}

 // #define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1231,9 +1234,9 @@
 *   M204 R    Retract Acceleration
 *   M204 T    Travel Acceleration
 */
-#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_ACCELERATION 500         // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION 500  // X, Y, Z acceleration for travel (non printing) moves

 /**
 * Default Jerk limits (mm/s)
@@ -1273,7 +1276,7 @@
 *   https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 #if DISABLED(CLASSIC_JERK)
-  #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
+#define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge
 #define JD_HANDLE_SMALL_SEGMENTS   // Use curvature estimation instead of just the junction angle
                                   // for small segments (< 1mm) with large junction angles (> 135°).
 #endif
@@ -1302,10 +1305,10 @@
 * The probe replaces the Z-MIN endstop and is used for Z homing.
 * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
 */
-#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+// #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN

 // Force the use of the probe for Z-axis homing
-//#define USE_PROBE_FOR_Z_HOMING
+#define USE_PROBE_FOR_Z_HOMING

 /**
 * Z_MIN_PROBE_PIN
@@ -1359,7 +1362,7 @@
 /**
 * The BLTouch probe uses a Hall effect sensor and emulates a servo.
 */
-//#define BLTOUCH
+#define BLTOUCH

 /**
 * MagLev V4 probe by MDD
@@ -1412,16 +1415,46 @@
 #define PROBE_DEPLOY_FEEDRATE (133 * 60) // (mm/min) Probe deploy speed
 #define PROBE_STOW_FEEDRATE (133 * 60)   // (mm/min) Probe stow speed

-  #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
-  #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
-  #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
-  #define MAG_MOUNTED_DEPLOY_4 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
-  #define MAG_MOUNTED_DEPLOY_5 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
-  #define MAG_MOUNTED_STOW_1   { PROBE_STOW_FEEDRATE,   { 245, 114, 20 } }  // Move to dock
-  #define MAG_MOUNTED_STOW_2   { PROBE_STOW_FEEDRATE,   { 245, 114,  0 } }  // Place probe beside remover
-  #define MAG_MOUNTED_STOW_3   { PROBE_STOW_FEEDRATE,   { 230, 114,  0 } }  // Side move to remove probe
-  #define MAG_MOUNTED_STOW_4   { PROBE_STOW_FEEDRATE,   { 210, 114, 20 } }  // Side move to remove probe
-  #define MAG_MOUNTED_STOW_5   { PROBE_STOW_FEEDRATE,   {   0,   0,  0 } }  // Extra move if needed
+#define MAG_MOUNTED_DEPLOY_1                \
+  {                                         \
+    PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } \
+  } // Move to side Dock & Attach probe
+#define MAG_MOUNTED_DEPLOY_2                \
+  {                                         \
+    PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } \
+  } // Move probe off dock
+#define MAG_MOUNTED_DEPLOY_3           \
+  {                                    \
+    PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } \
+  } // Extra move if needed
+#define MAG_MOUNTED_DEPLOY_4           \
+  {                                    \
+    PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } \
+  } // Extra move if needed
+#define MAG_MOUNTED_DEPLOY_5           \
+  {                                    \
+    PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } \
+  } // Extra move if needed
+#define MAG_MOUNTED_STOW_1                \
+  {                                       \
+    PROBE_STOW_FEEDRATE, { 245, 114, 20 } \
+  } // Move to dock
+#define MAG_MOUNTED_STOW_2               \
+  {                                      \
+    PROBE_STOW_FEEDRATE, { 245, 114, 0 } \
+  } // Place probe beside remover
+#define MAG_MOUNTED_STOW_3               \
+  {                                      \
+    PROBE_STOW_FEEDRATE, { 230, 114, 0 } \
+  } // Side move to remove probe
+#define MAG_MOUNTED_STOW_4                \
+  {                                       \
+    PROBE_STOW_FEEDRATE, { 210, 114, 20 } \
+  } // Side move to remove probe
+#define MAG_MOUNTED_STOW_5           \
+  {                                  \
+    PROBE_STOW_FEEDRATE, { 0, 0, 0 } \
+  } // Extra move if needed
 #endif

 // Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector
@@ -1511,7 +1544,7 @@
 *     |    [-]    |
 *     O-- FRONT --+
 */
-#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
+#define NOZZLE_TO_PROBE_OFFSET { -46.63, -5.12, 0 }

 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
@@ -1663,14 +1696,14 @@
 // @section extruder

 // #define DISABLE_E               // Disable the extruder when not stepping
-#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
+// #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled

 // @section motion

 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
 #define INVERT_X_DIR false
-#define INVERT_Y_DIR true
-#define INVERT_Z_DIR false
+#define INVERT_Y_DIR false
+#define INVERT_Z_DIR true
 // #define INVERT_I_DIR false
 // #define INVERT_J_DIR false
 // #define INVERT_K_DIR false
@@ -1722,8 +1755,8 @@
 // @section geometry

 // The size of the printable area
-#define X_BED_SIZE 200
-#define Y_BED_SIZE 200
+#define X_BED_SIZE 235
+#define Y_BED_SIZE 235

 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
@@ -1731,7 +1764,7 @@
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 200
+#define Z_MAX_POS 250
 // #define I_MIN_POS 0
 // #define I_MAX_POS 50
 // #define J_MIN_POS 0
@@ -1901,7 +1934,7 @@
 */
 // #define AUTO_BED_LEVELING_3POINT
 // #define AUTO_BED_LEVELING_LINEAR
-//#define AUTO_BED_LEVELING_BILINEAR
+#define AUTO_BED_LEVELING_BILINEAR
 // #define AUTO_BED_LEVELING_UBL
 // #define MESH_BED_LEVELING

@@ -1922,10 +1955,10 @@
 /**
 * Auto-leveling needs preheating
 */
-//#define PREHEAT_BEFORE_LEVELING
+#define PREHEAT_BEFORE_LEVELING
 #if ENABLED(PREHEAT_BEFORE_LEVELING)
 #define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
-  #define LEVELING_BED_TEMP     50
+#define LEVELING_BED_TEMP 60
 #endif

 /**
@@ -1987,7 +2020,7 @@
 #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)

 // Set the number of grid points per dimension.
-  #define GRID_MAX_POINTS_X 3
+#define GRID_MAX_POINTS_X 5
 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

 // Probe along the Y axis, advancing X after each column
@@ -2118,7 +2151,7 @@
 * - Allows Z homing only when XY positions are known and trusted.
 * - If stepper drivers sleep, XY homing may be required again before Z homing.
 */
-//#define Z_SAFE_HOMING
+#define Z_SAFE_HOMING

 #if ENABLED(Z_SAFE_HOMING)
 #define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing
@@ -2126,7 +2159,7 @@
 #endif

 // Homing speeds (linear=mm/min, rotational=°/min)
-#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
+#define HOMING_FEEDRATE_MM_M {(20 * 60), (20 * 60), (4 * 60)}

 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS
@@ -2204,7 +2237,7 @@
 *   M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
 *   M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
 */
-//#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
+#define EEPROM_SETTINGS // Persistent storage with M500 and M501
 // #define DISABLE_M503        // Saves ~2700 bytes of flash. Disable for release!
 #define EEPROM_CHITCHAT    // Give feedback on EEPROM commands. Disable to save flash.
 #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
@@ -2243,16 +2276,16 @@
 // Preheat Constants - Up to 10 are supported without changes
 //
 #define PREHEAT_1_LABEL "PLA"
-#define PREHEAT_1_TEMP_HOTEND 180
-#define PREHEAT_1_TEMP_BED     70
+#define PREHEAT_1_TEMP_HOTEND 185
+#define PREHEAT_1_TEMP_BED 60
 #define PREHEAT_1_TEMP_CHAMBER 35
-#define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255
+#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255

 #define PREHEAT_2_LABEL "ABS"
 #define PREHEAT_2_TEMP_HOTEND 240
-#define PREHEAT_2_TEMP_BED    110
+#define PREHEAT_2_TEMP_BED 70
 #define PREHEAT_2_TEMP_CHAMBER 35
-#define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
+#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255

 // @section motion

@@ -2473,7 +2506,7 @@
 *
 * :['JAPANESE', 'WESTERN', 'CYRILLIC']
 */
-#define DISPLAY_CHARSET_HD44780 JAPANESE
+#define DISPLAY_CHARSET_HD44780 WESTERN

 /**
 * Info Screen Style (0:Classic, 1:Průša)
@@ -2488,14 +2521,14 @@
 * SD Card support is disabled by default. If your controller has an SD slot,
 * you must uncomment the following option or it won't work.
 */
-//#define SDSUPPORT
+#define SDSUPPORT

 /**
 * SD CARD: ENABLE CRC
 *
 * Use CRC checks and retries on the SD communication.
 */
-//#define SD_CHECK_AND_RETRY
+#define SD_CHECK_AND_RETRY

 /**
 * LCD Menu Items
@@ -2577,7 +2610,7 @@
 // If you have a speaker that can produce tones, enable it here.
 // By default Marlin assumes you have a buzzer with a fixed frequency.
 //
-//#define SPEAKER
+#define SPEAKER

 //
 // The duration and frequency for the UI feedback sound.
@@ -2866,7 +2899,10 @@
 //
 // Connect to EXP1 on RAMPS and compatible boards.
 //
-//#define CR10_STOCKDISPLAY
+#define CR10_STOCKDISPLAY
+#if ENABLED(CR10_STOCKDISPLAY)
+#define RET6_12864_LCD // Specific to the SoC (can either be RET / VET)
+#endif

 //
 // Ender-2 OEM display, a variant of the MKS_MINI_12864
@@ -3255,7 +3291,7 @@
 // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
 // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
 // is too low, you should also increment SOFT_PWM_SCALE.
-//#define FAN_SOFT_PWM
+#define FAN_SOFT_PWM

 // Incrementing this by 1 will double the software PWM frequency,
 // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -21,6 +21,8 @@
 */
 #pragma once

+#define CONFIG_EXAMPLES_DIR "config/examples/Creality/Ender-3 Pro/CrealityV427"
+
 /**
 * Configuration_adv.h
 *
@@ -30,7 +32,7 @@
 *
 * Basic settings can be found in Configuration.h
 */
-#define CONFIGURATION_ADV_H_VERSION 02010203
+#define CONFIGURATION_ADV_H_VERSION 02010204

 // @section develop

@@ -885,7 +887,7 @@
 //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (linear=mm, rotational=°) Backoff from endstops after homing
 //#define XY_COUNTERPART_BACKOFF_MM 0         // (mm) Backoff X after homing Y, and vice-versa

-//#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
+#define QUICK_HOME // If G28 contains XY do a diagonal move first
 // #define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
 // #define HOME_Z_FIRST                        // Home Z first. Requires a real endstop (not a probe).
 // #define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
@@ -959,7 +961,6 @@
 */
 // #define BLTOUCH_HS_MODE true

-
 #endif // BLTOUCH

 // @section calibration
@@ -1034,7 +1035,10 @@
 #if ENABLED(ASSISTED_TRAMMING)

 // Define from 3 to 9 points to probe.
-  #define TRAMMING_POINT_XY { {  20, 20 }, { 180,  20 }, { 180, 180 }, { 20, 180 } }
+#define TRAMMING_POINT_XY                        \
+  {                                              \
+    {20, 20}, {180, 20}, {180, 180}, { 20, 180 } \
+  }

 // Define position names for probe points.
 #define TRAMMING_POINT_NAME_1 "Front-Left"
@@ -1378,7 +1382,7 @@
 // #define LCD_BACKLIGHT_TIMEOUT_MINS 1  // (minutes) Timeout before turning off the backlight

 #if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
-  //#define PROBE_OFFSET_WIZARD       // Add a Probe Z Offset calibration option to the LCD menu
+#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
 #if ENABLED(PROBE_OFFSET_WIZARD)
 /**
 * Enable to init the Probe Z-Offset when starting the Wizard.
@@ -1414,7 +1418,7 @@
 #endif

 // Include a page of printer information in the LCD Main Menu
-  //#define LCD_INFO_MENU
+#define LCD_INFO_MENU
 #if ENABLED(LCD_INFO_MENU)
 // #define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
 #endif
@@ -1444,7 +1448,7 @@
 #endif

 // Scroll a longer status message into view
-  //#define STATUS_MESSAGE_SCROLLING
+#define STATUS_MESSAGE_SCROLLING

 // Apply a timeout to low-priority status messages
 // #define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
@@ -1639,7 +1643,7 @@
 // #define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
 // #define M20_TIMESTAMP_SUPPORT         // Include timestamps by adding the 'T' flag to M20 commands

-  //#define SCROLL_LONG_FILENAMES         // Scroll long filenames in the SD card menu
+#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu

 // #define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)

@@ -2063,7 +2067,7 @@
 *
 * Warning: Does not respect endstops!
 */
-//#define BABYSTEPPING
+#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
 // #define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
 // #define BABYSTEP_WITHOUT_HOMING
@@ -2074,7 +2078,7 @@
 #define BABYSTEP_MULTIPLICATOR_Z 1  // (steps or mm) Steps or millimeter distance for each Z babystep
 #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep

-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
+#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
 #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
 #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
                                      // Note: Extra time may be added to mitigate controller latency.
@@ -2731,7 +2735,7 @@
 #define INTERPOLATE true

 #if AXIS_IS_TMC_CONFIG(X)
-    #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
+#define X_CURRENT 580            // (mA) RMS current. Multiply by 1.414 for peak current.
 #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
 #define X_MICROSTEPS 16          // 0..256
 #define X_RSENSE 0.11            // Multiplied x1000 for TMC26X
@@ -2751,7 +2755,7 @@
 #endif

 #if AXIS_IS_TMC_CONFIG(Y)
-    #define Y_CURRENT       800
+#define Y_CURRENT 580
 #define Y_CURRENT_HOME Y_CURRENT
 #define Y_MICROSTEPS 16
 #define Y_RSENSE 0.11
@@ -2771,7 +2775,7 @@
 #endif

 #if AXIS_IS_TMC_CONFIG(Z)
-    #define Z_CURRENT       800
+#define Z_CURRENT 580
 #define Z_CURRENT_HOME Z_CURRENT
 #define Z_MICROSTEPS 16
 #define Z_RSENSE 0.11
@@ -2871,7 +2875,7 @@
 #endif

 #if AXIS_IS_TMC_CONFIG(E0)
-    #define E0_CURRENT      800
+#define E0_CURRENT 650
 #define E0_MICROSTEPS 16
 #define E0_RSENSE 0.11
 #define E0_CHAIN_POS -1
@@ -3062,7 +3066,7 @@
 * Define your own with:
 * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
 */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+#define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below)
 // #define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
 // #define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
 // #define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
@@ -3225,7 +3229,9 @@
 *   stepperY.intpol(0); \
 * }
 */
-  #define TMC_ADV() {  }
+#define TMC_ADV() \
+  {               \
+  }

 #endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X

--- a/Marlin/Version.h
+++ b/Marlin/Version.h
@@ -28,7 +28,7 @@
 /**
 * Marlin release version identifier
 */
-//#define SHORT_BUILD_VERSION "2.1.2.3"
+//#define SHORT_BUILD_VERSION "2.1.2.4"

 /**
 * Verbose version identifier which should contain a reference to the location
--- a/Marlin/_Bootscreen.h
+++ b/Marlin/_Bootscreen.h
@@ -0,0 +1,97 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Custom Boot Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * https://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
+#define CUSTOM_BOOTSCREEN_INVERTED
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
+  B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
+  B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
+  B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
+  B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
+  B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
+  B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
+  B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
+  B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
+  B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
+  B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
+  B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
+  B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
+  B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
+  B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
+  B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
+  B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
+  B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
+  B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
+  B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
+  B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
+};
--- a/Marlin/_Statusscreen.h
+++ b/Marlin/_Statusscreen.h
@@ -0,0 +1,71 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * https://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y            8
+#define STATUS_LOGO_WIDTH       39
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B11111000,B00000001,B10000000,B00000000,B00001100,
+  B01001000,B00000000,B10000000,B00000000,B00010010,
+  B01000011,B11000011,B10001100,B11010000,B00000010,
+  B01110001,B00100100,B10010010,B01100111,B11001100,
+  B01000001,B00100100,B10011110,B01000000,B00000010,
+  B01001001,B00100100,B10010000,B01000000,B00010010,
+  B11111011,B10110011,B11001110,B11100000,B00001100,
+  B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000011,B10000000,B00000000,B00000000,
+  B00000000,B00000010,B01000000,B00000000,B00000000,
+  B00000000,B00000010,B01010110,B01100000,B00000000,
+  B00000000,B00000011,B10011000,B10010000,B00000000,
+  B00000000,B00000010,B00010000,B10010000,B00000000,
+  B00000000,B00000010,B00010000,B10010000,B00000000,
+  B00000000,B00000010,B00010000,B01100000,B00000000
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#define STATUS_HEATERS_XSPACE   20
+#if HOTENDS < 2
+  #define STATUS_HEATERS_X      48
+  #define STATUS_BED_X          72
+#else
+  #define STATUS_HEATERS_X      40
+  #define STATUS_BED_X          80
+#endif
--- a/Marlin/src/HAL/AVR/fast_pwm.cpp
+++ b/Marlin/src/HAL/AVR/fast_pwm.cpp
@@ -150,7 +150,7 @@ void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
      else {
        if (p == 32 || p == 128) continue;                    // Skip TIMER2 specific prescalers when not TIMER2
        const uint16_t rft = (F_CPU) / (p * f_desired);
-        DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=" STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
+        DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=", STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
        res_fast_temp = rft - 1;
        res_pc_temp = rft / 2;
      }
--- a/Marlin/src/HAL/AVR/fastio/fastio_1280.h
+++ b/Marlin/src/HAL/AVR/fastio/fastio_1280.h
@@ -28,9 +28,6 @@
 *   Port          : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
 *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
 *   Analog Input  :                                                                                                                                                                    0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
--- a/Marlin/src/HAL/AVR/fastio/fastio_1281.h
+++ b/Marlin/src/HAL/AVR/fastio/fastio_1281.h
@@ -26,9 +26,6 @@
 *
 *   Logical Pin: 38 39 40 41 42 43 44 45 16 10 11 12 06 07 08 09 30 31 32 33 34 35 36 37 17 18 19 20 21 22 23 24 00 01 13 05 02 03 14 15 46 47 48 49 50 51 52 53 25 26 27 28 29 04
 *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
--- a/Marlin/src/HAL/AVR/fastio/fastio_168.h
+++ b/Marlin/src/HAL/AVR/fastio/fastio_168.h
@@ -26,9 +26,6 @@
 *
 *   Logical Pin: 08 09 10 11 12 13 14 15 16 17 18 19 20 21 00 01 02 03 04 05 06 07
 *   Port:        B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
--- a/Marlin/src/HAL/AVR/fastio/fastio_644.h
+++ b/Marlin/src/HAL/AVR/fastio/fastio_644.h
@@ -26,9 +26,6 @@
 *
 *   Logical Pin: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
 *   Port:        B0 B1 B2 B3 B4 B5 B6 B7 D0 D1 D2 D3 D4 D5 D6 D7 C0 C1 C2 C3 C4 C5 C6 C7 A7 A6 A5 A4 A3 A2 A1 A0
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 /**                        ATMega644
--- a/Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h
+++ b/Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h
@@ -27,9 +27,6 @@
 *   Logical Pin: 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 00 01 02 03 04 05 06 07 08 09(46*47)36 37 18 19 38 39 40 41 42 43 44 45
 *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7
 *            The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
--- a/Marlin/src/HAL/DUE/inc/SanityCheck.h
+++ b/Marlin/src/HAL/DUE/inc/SanityCheck.h
@@ -68,16 +68,15 @@
 * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
 * as the TMC2130 soft SPI the most common setup.
 */
-#define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
-
 #if HAS_MEDIA && HAS_DRIVER(TMC2130)
-  #if ENABLED(TMC_USE_SW_SPI)
-    #if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
+  #define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
+  #if DISABLED(DUE_SOFTWARE_SPI) && ENABLED(TMC_USE_SW_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
    #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
  #endif
-  #elif ENABLED(DUE_SOFTWARE_SPI)
+  #if ENABLED(DUE_SOFTWARE_SPI) && DISABLED(TMC_USE_SW_SPI)
    #error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
  #endif
+  #undef _IS_HW_SPI
 #endif

 #if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
--- a/Marlin/src/HAL/DUE/spi_pins.h
+++ b/Marlin/src/HAL/DUE/spi_pins.h
@@ -24,7 +24,7 @@
 /**
 * Define SPI Pins: SCK, MISO, MOSI, SS
 *
- * Available chip select pins for HW SPI are 4 10 52 77
+ * Available chip select pins for HW SPI are 4 10 52 77 87
 */
 #if SDSS == 4 || SDSS == 10 || SDSS == 52 || SDSS == 77 || SDSS == 87
  #if SDSS == 4
--- a/Marlin/src/HAL/LINUX/spi_pins.h
+++ b/Marlin/src/HAL/LINUX/spi_pins.h
@@ -31,12 +31,6 @@
                        // spiBeginTransaction.
 #endif

-// Onboard SD
-//#define SD_SCK_PIN     P0_07
-//#define SD_MISO_PIN    P0_08
-//#define SD_MOSI_PIN    P0_09
-//#define SD_SS_PIN      P0_06
-
 // External SD
 #ifndef SD_SCK_PIN
  #define SD_SCK_PIN        50
--- a/Marlin/src/HAL/LPC1768/fastio.h
+++ b/Marlin/src/HAL/LPC1768/fastio.h
@@ -66,7 +66,7 @@
 #define _WRITE(IO,V)          WRITE_PIN(IO,V)

 /// toggle a pin
-#define _TOGGLE(IO)           _WRITE(IO, !READ(IO))
+#define _TOGGLE(IO)           LPC176x::gpio_toggle(IO)

 /// set pin as input
 #define _SET_INPUT(IO)        SET_DIR_INPUT(IO)
--- a/Marlin/src/HAL/LPC1768/spi_pins.h
+++ b/Marlin/src/HAL/LPC1768/spi_pins.h
@@ -30,12 +30,13 @@
                        // spiBeginTransaction.
 #endif

-/** onboard SD card */
+// Onboard SD
 //#define SD_SCK_PIN     P0_07
 //#define SD_MISO_PIN    P0_08
 //#define SD_MOSI_PIN    P0_09
 //#define SD_SS_PIN      P0_06
-/** external */
+
+// External SD
 #ifndef SD_SCK_PIN
  #define SD_SCK_PIN        P0_15
 #endif
--- a/Marlin/src/MarlinCore.cpp
+++ b/Marlin/src/MarlinCore.cpp
@@ -1329,7 +1329,7 @@ void setup() {
    #endif
  #endif

-  #if ALL(HAS_MEDIA, SDCARD_EEPROM_EMULATION)
+  #if HAS_MEDIA && ANY(SDCARD_EEPROM_EMULATION, POWER_LOSS_RECOVERY)
    SETUP_RUN(card.mount());          // Mount media with settings before first_load
  #endif

--- a/Marlin/src/gcode/control/M80_M81.cpp
+++ b/Marlin/src/gcode/control/M80_M81.cpp
@@ -112,9 +112,9 @@ void GcodeSuite::M81() {
    return;
  }

-  #if HAS_SUICIDE
-    suicide();
-  #elif ENABLED(PSU_CONTROL)
+  #if ENABLED(PSU_CONTROL)
    powerManager.power_off_soon();
+  #elif HAS_SUICIDE
+    suicide();
  #endif
 }
--- a/Marlin/src/inc/Version.h
+++ b/Marlin/src/inc/Version.h
@@ -25,7 +25,7 @@
 * Release version. Leave the Marlin version or apply a custom scheme.
 */
 #ifndef SHORT_BUILD_VERSION
-  #define SHORT_BUILD_VERSION "2.1.2.3"
+  #define SHORT_BUILD_VERSION "2.1.2.4"
 #endif

 /**
@@ -42,7 +42,7 @@
 * version was tagged.
 */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2024-05-29"
+  #define STRING_DISTRIBUTION_DATE "2024-06-16"
 #endif

 /**
@@ -52,7 +52,7 @@
 * to alert users to major changes.
 */

-#define MARLIN_HEX_VERSION 02010203
+#define MARLIN_HEX_VERSION 02010204
 #ifndef REQUIRED_CONFIGURATION_H_VERSION
  #define REQUIRED_CONFIGURATION_H_VERSION MARLIN_HEX_VERSION
 #endif
--- a/Marlin/src/module/stepper.cpp
+++ b/Marlin/src/module/stepper.cpp
@@ -274,7 +274,7 @@ xyze_int8_t Stepper::count_direction{0};
 #define MINDIR(A) (count_direction[_AXIS(A)] < 0)
 #define MAXDIR(A) (count_direction[_AXIS(A)] > 0)

-#define STEPTEST(A,M,I) TERN0(HAS_ ##A## ##I## _ ##M, !(TEST(endstops.state(), A## ##I## _ ##M) && M## DIR(A)) && !locked_ ##A## ##I## _motor)
+#define STEPTEST(A,M,I) TERN0(USE_##A##I##_##M, !(TEST(endstops.state(), A##I##_##M) && M## DIR(A)) && !locked_ ##A##I##_motor)

 #define DUAL_ENDSTOP_APPLY_STEP(A,V)             \
  if (separate_multi_axis) {                     \
@@ -1610,7 +1610,7 @@ void Stepper::isr() {
 #if MINIMUM_STEPPER_PULSE || MAXIMUM_STEPPER_RATE
  #define ISR_PULSE_CONTROL 1
 #endif
-#if ISR_PULSE_CONTROL && DISABLED(I2S_STEPPER_STREAM)
+#if ISR_PULSE_CONTROL && MULTISTEPPING_LIMIT > 1 && DISABLED(I2S_STEPPER_STREAM)
  #define ISR_MULTI_STEPS 1
 #endif

@@ -1655,10 +1655,11 @@ void Stepper::pulse_phase_isr() {
  // Just update the value we will get at the end of the loop
  step_events_completed += events_to_do;

-  // Take multiple steps per interrupt (For high speed moves)
-  #if ISR_MULTI_STEPS
+  TERN_(ISR_PULSE_CONTROL, USING_TIMED_PULSE());
+
+  // Take multiple steps per interrupt. For high speed moves.
+  #if ENABLED(ISR_MULTI_STEPS)
    bool firstStep = true;
-    USING_TIMED_PULSE();
  #endif
  xyze_bool_t step_needed{0};

@@ -1944,7 +1945,7 @@ void Stepper::pulse_phase_isr() {
    TERN_(I2S_STEPPER_STREAM, i2s_push_sample());

    // TODO: need to deal with MINIMUM_STEPPER_PULSE over i2s
-    #if ISR_MULTI_STEPS
+    #if ISR_PULSE_CONTROL
      START_TIMED_PULSE();
      AWAIT_HIGH_PULSE();
    #endif
--- a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h
+++ b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h
@@ -29,17 +29,57 @@

 #define BOARD_INFO_NAME "Creality3D RAMPS"

+//#define CR2020_INDUSTRIAL_SERIES                // Use layout specific to CR2020
+
+//
+// 4-pin expansion header
+//
+#define EXP1_PIN                              65  // A11 - Used by CR2020 Industrial series for case
+#define EXP2_PIN                              66  // A12
+#define EXP3_PIN                              11  // RAMPS: SERVO0_PIN
+#define EXP4_PIN                              12  // RAMPS: PS_ON_PIN
+
+//
+// Servos
+//
+#define SERVO1_PIN                            12
+
 //
 // Heaters / Fans
 //
 #define MOSFET_B_PIN                           7
 #define FAN0_PIN                               9

+//
+// Filament Runout Sensor
+//
 #define FIL_RUNOUT_PIN                         2
 #if NUM_RUNOUT_SENSORS >= 2
  #define FIL_RUNOUT2_PIN                     15  // Creality CR-X can use dual runout sensors
 #endif

+//
+// Misc. Functions
+//
+#ifdef CR2020_INDUSTRIAL_SERIES
+  #if ENABLED(PSU_CONTROL) && !defined(PS_ON_PIN)
+    #define PS_ON_PIN                         40  // Used by CR2020 Industrial series
+  #endif
+  #ifndef SUICIDE_PIN
+    #define SUICIDE_PIN                       12  // Used by CR2020 Industrial series
+  #endif
+  #ifndef SUICIDE_PIN_STATE
+    #define SUICIDE_PIN_STATE               HIGH
+  #endif
+#endif
+
+#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN)
+  #define CASE_LIGHT_PIN                      65
+#endif
+
+//
+// SD Card
+//
 #ifndef SD_DETECT_PIN
  #if SD_CONNECTION_IS(ONBOARD)
    //#define HAS_ONBOARD_SD_DETECT               // If the SD_DETECT_PIN is wired up
@@ -49,28 +89,14 @@
  #endif
 #endif

-#ifndef PS_ON_PIN
-  #define PS_ON_PIN                           40  // Used by CR2020 Industrial series
-#endif
-
-#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN)
-  #define CASE_LIGHT_PIN                      65
-#endif
-
-#define SERVO1_PIN                            12
-
+//
+// Based on RAMPS 1.4
+//
 #include "pins_RAMPS.h"

+//
+// LCD / Controller
+//
 #ifndef BEEPER_PIN
  #define BEEPER_PIN                          37  // Always define beeper pin so Play Tone works with ExtUI
 #endif
-
-#define EXP1_PIN                              65  // A11 - Used by CR2020 Industrial series for case
-#define EXP2_PIN                              66  // A12
-#define EXP3_PIN                              11  // SERVO0_PIN
-#define EXP4_PIN                              12  // PS_ON_PIN
-
-#define SUICIDE_PIN                           12  // Used by CR2020 Industrial series
-#ifndef SUICIDE_PIN_STATE
-  #define SUICIDE_PIN_STATE                 HIGH
-#endif
--- a/Marlin/src/pins/sam/pins_ARCHIM1.h
+++ b/Marlin/src/pins/sam/pins_ARCHIM1.h
@@ -26,10 +26,10 @@
 *
 * The Archim 1.0 board requires Arduino Archim addons installed.
 *
- * - Add the following URL to Arduino IDE's Additional Board Manager URLs:
+ * - Add the following URL to Arduino IDE's Additional Boards Manager URLs:
 *   https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json
 *
- * - In the Arduino IDE Board Manager search for Archim and install the package.
+ * - In the Arduino IDE Boards Manager search for Archim and install the package.
 *
 * - Change your target board to "Archim".
 *
--- a/Marlin/src/pins/sam/pins_ARCHIM2.h
+++ b/Marlin/src/pins/sam/pins_ARCHIM2.h
@@ -26,10 +26,10 @@
 *
 * The Archim 2.0 board requires Arduino Archim addons installed.
 *
- * - Add the following URL to Arduino IDE's Additional Board Manager URLs:
+ * - Add the following URL to Arduino IDE's Additional Boards Manager URLs:
 *   https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json
 *
- * - In the Arduino IDE Board Manager search for Archim and install the package.
+ * - In the Arduino IDE Boards Manager search for Archim and install the package.
 *
 * - Change your target board to "Archim".
 *
--- a/Marlin/src/pins/sanguino/pins_ANET_10.h
+++ b/Marlin/src/pins/sanguino/pins_ANET_10.h
@@ -35,7 +35,7 @@
 */

 /**
- * The standard Arduino IDE extension (board manager) for this board
+ * The standard Arduino IDE extension (Boards Manager) for this board
 * is located at https://github.com/SkyNet3D/anet-board.
 *
 * Installation instructions are on that page.
@@ -52,7 +52,7 @@
 */

 /**
- * Another usable Arduino IDE extension (board manager) can be found at
+ * Another usable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h
+++ b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h
@@ -33,7 +33,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h
+++ b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h
@@ -32,7 +32,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_GEN6.h
+++ b/Marlin/src/pins/sanguino/pins_GEN6.h
@@ -36,7 +36,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h
+++ b/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h
@@ -32,7 +32,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_GEN7_12.h
+++ b/Marlin/src/pins/sanguino/pins_GEN7_12.h
@@ -42,7 +42,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_GEN7_13.h
+++ b/Marlin/src/pins/sanguino/pins_GEN7_13.h
@@ -32,7 +32,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_GEN7_14.h
+++ b/Marlin/src/pins/sanguino/pins_GEN7_14.h
@@ -38,7 +38,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h
+++ b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h
@@ -37,7 +37,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_OMCA.h
+++ b/Marlin/src/pins/sanguino/pins_OMCA.h
@@ -59,7 +59,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_OMCA_A.h
+++ b/Marlin/src/pins/sanguino/pins_OMCA_A.h
@@ -57,7 +57,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
+++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
@@ -44,7 +44,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/pins/sanguino/pins_SETHI.h
+++ b/Marlin/src/pins/sanguino/pins_SETHI.h
@@ -33,7 +33,7 @@
 */

 /**
- * A useable Arduino IDE extension (board manager) can be found at
+ * A useable Arduino IDE extension (Boards Manager) can be found at
 * https://github.com/Lauszus/Sanguino
 *
 * This extension has been tested on Arduino 1.6.12 & 1.8.0
--- a/Marlin/src/sd/Sd2Card.h
+++ b/Marlin/src/sd/Sd2Card.h
@@ -78,7 +78,7 @@ uint8_t const SD_CARD_TYPE_SD1  = 1,        // Standard capacity V1 SD card
 /**
 * Define SOFTWARE_SPI to use bit-bang SPI
 */
-#if ANY(MEGA_SOFT_SPI, USE_SOFTWARE_SPI)
+#if ANY(MEGA_SOFT_SPI, SDFAT_USE_SOFTWARE_SPI)
  #define SOFTWARE_SPI
 #endif

--- a/Marlin/src/sd/SdFatConfig.h
+++ b/Marlin/src/sd/SdFatConfig.h
@@ -88,8 +88,8 @@
 */
 #define MEGA_SOFT_SPI 0

-// Set USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI.
-#define USE_SOFTWARE_SPI 0
+// Set SDFAT_USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI.
+#define SDFAT_USE_SOFTWARE_SPI 0

 /**
 * The __cxa_pure_virtual function is an error handler that is invoked when
--- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
+++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
@@ -33,7 +33,7 @@
  /**
   * Define SOFTWARE_SPI to use bit-bang SPI
   */
-  #if ANY(MEGA_SOFT_SPI, USE_SOFTWARE_SPI)
+  #if ANY(MEGA_SOFT_SPI, SDFAT_USE_SOFTWARE_SPI)
    #define SOFTWARE_SPI
  #endif

--- a/README.md
+++ b/README.md
@@ -94,52 +94,19 @@ The Issue Queue is reserved for Bug Reports and Feature Requests. To get help wi

 Marlin is constantly improving thanks to a huge number of contributors from all over the world bringing their specialties and talents. Huge thanks are due to [all the contributors](https://github.com/MarlinFirmware/Marlin/graphs/contributors) who regularly patch up bugs, help direct traffic, and basically keep Marlin from falling apart. Marlin's continued existence would not be possible without them.

-## Administration
+## Project Leadership

-Regular users can open and close their own issues, but only the administrators can do project-related things like add labels, merge changes, set milestones, and kick trolls. The current Marlin admin team consists of:
-
-<table align="center">
-<tr><td>Project Maintainer</td></tr>
-<tr><td>
-
- 🇺🇸  **Scott Lahteine**
-       [@thinkyhead](https://github.com/thinkyhead)
-       [<kbd>  Donate 💸  </kbd>](https://www.thinkyhead.com/donate-to-marlin)
-
-</td><td>
-
- 🇺🇸  **Roxanne Neufeld**
-       [@Roxy-3D](https://github.com/Roxy-3D)
-
- 🇺🇸  **Keith Bennett**
-       [@thisiskeithb](https://github.com/thisiskeithb)
-       [<kbd>  Donate 💸  </kbd>](https://github.com/sponsors/thisiskeithb)
-
- 🇺🇸  **Jason Smith**
-       [@sjasonsmith](https://github.com/sjasonsmith)
-
-</td><td>
-
- 🇧🇷  **Victor Oliveira**
-       [@rhapsodyv](https://github.com/rhapsodyv)
-
- 🇬🇧  **Chris Pepper**
-       [@p3p](https://github.com/p3p)
-
-🇳🇿  **Peter Ellens**
-       [@ellensp](https://github.com/ellensp)
-       [<kbd>  Donate 💸  </kbd>](https://ko-fi.com/ellensp)
-
-</td><td>
-
- 🇺🇸  **Bob Kuhn**
-       [@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)
-
- 🇳🇱  **Erik van der Zalm**
-       [@ErikZalm](https://github.com/ErikZalm)
-
-</td></tr>
-</table>
+Name|Role|Link|Donate
+----|----|----|----
+🇺🇸 Scott Lahteine|Project Lead|[[@thinkyhead](https://github.com/thinkyhead)]|[💸 Donate](https://marlinfw.org/docs/development/contributing.html#donate)
+🇺🇸 Roxanne Neufeld|Admin|[[@Roxy-3D](https://github.com/Roxy-3D)]|
+🇺🇸 Keith Bennett|Admin|[[@thisiskeithb](https://github.com/thisiskeithb)]|[💸 Donate](https://github.com/sponsors/thisiskeithb)
+🇺🇸 Jason Smith|Admin|[[@sjasonsmith](https://github.com/sjasonsmith)]|
+🇧🇷 Victor Oliveira|Admin|[[@rhapsodyv](https://github.com/rhapsodyv)]|
+🇬🇧 Chris Pepper|Admin|[[@p3p](https://github.com/p3p)]|
+🇳🇿 Peter Ellens|Admin|[[@ellensp](https://github.com/ellensp)]|[💸 Donate](https://ko-fi.com/ellensp)
+🇺🇸 Bob Kuhn|Admin|[[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)]|
+🇳🇱 Erik van der Zalm|Founder|[[@ErikZalm](https://github.com/ErikZalm)]|

 ## License

--- a/config/README.md
+++ b/config/README.md
@@ -1,3 +1,3 @@
 # Where have all the configurations gone?

-## https://github.com/MarlinFirmware/Configurations/archive/release-2.1.2.3.zip
+## https://github.com/MarlinFirmware/Configurations/archive/release-2.1.2.4.zip
--- a/ini/samd51.ini
+++ b/ini/samd51.ini
@@ -15,11 +15,12 @@
 [env:SAMD51_grandcentral_m4]
 platform         = atmelsam
 board            = adafruit_grandcentral_m4
-build_flags      = ${common.build_flags} -std=gnu++17
+build_flags      = ${common.build_flags} -std=gnu++17 -DUSE_TINYUSB
 build_unflags    = -std=gnu++11
 build_src_filter = ${common.default_src_filter} +<src/HAL/SAMD51>
 lib_deps         = ${common.lib_deps}
                   SoftwareSerialM
+                   Adafruit TinyUSB Library
 extra_scripts    = ${common.extra_scripts}
                   pre:buildroot/share/PlatformIO/scripts/SAMD51_grandcentral_m4.py
 custom_marlin.HAS_MEDIA = SdFat - Adafruit Fork, Adafruit SPIFlash
Author	SHA1	Message	Date
Sravan Balaji	9b0583e5e1	Config Updates - Enable preheat before leveling @ 60C - Change bed preheat temp to 60C - Change display charset to western - Enable SD check and retry	2024-07-14 08:43:05 -04:00
Sravan Balaji	0a54fda0c9	Ender 3 Pro w/ Creality V4.2.7 Board Configuration	2024-07-14 06:48:38 -04:00
Scott Lahteine	fff0d70361	🔖 Version 2.1.2.4	2024-06-15 20:45:26 -05:00
ellensp	53392f39a4	🐛 Mount media early for POWER_LOSS_RECOVERY (#27177 )	2024-06-15 20:28:43 -05:00
Mihai	1f8587d312	🧑‍💻 Adjust pulse_phase_isr code guards (#27112 )	2024-06-15 20:28:43 -05:00
Scott Lahteine	aa778c3cb0	🚸 Prefer friendly Power Off over Auto-unalive	2024-06-15 20:28:43 -05:00
Scott Lahteine	af8747ec69	📝 "Boards Manager"	2024-06-15 20:28:43 -05:00
Scott Lahteine	e6787f7283	🔧 Assume RAMPS_CREALITY is not CR2020	2024-06-15 20:28:43 -05:00
TheRaf974	4f146ef657	🔧 Overridable SUICIDE_PIN for RAMPS_CREALITY (#27143 )	2024-06-15 20:28:43 -05:00
Scott Lahteine	c674f01c01	🎨 Misc. SPI cleanup	2024-06-15 20:28:43 -05:00
Mihai	f7680f3f73	⚡️ Optimize LPC176x pin toggle (#27149 )	2024-06-15 20:28:43 -05:00
ellensp	34305439cd	✏️ Fix comma typo (#27138 )	2024-06-15 20:28:43 -05:00
Scott Lahteine	23fda5b3cf	📝 Remove dead video links	2024-06-15 20:28:43 -05:00
Scott Lahteine	1d13aaa31f	🔨 Update SAMD51 build deps	2024-06-15 20:28:43 -05:00
ellensp	9e02be465d	🩹 Fix broken STEPTEST	2024-06-15 03:41:21 +12:00