🩹 Longer3D LK has ONBOARD_SDIO (#27129)

Marlin/Configuration.h

@@ -21,8 +21,6 @@
  */
 #pragma once
 
-#define CONFIG_EXAMPLES_DIR "config/examples/Creality/Ender-3 Pro/CrealityV427"
-
 /**
  * Configuration.h
  *
@@ -63,7 +61,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(Dust, Ender-3 Pro)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
@@ -81,16 +79,16 @@
 #define SHOW_BOOTSCREEN
 
 // Show the bitmap in Marlin/_Bootscreen.h on startup.
-#define SHOW_CUSTOM_BOOTSCREEN
+//#define SHOW_CUSTOM_BOOTSCREEN
 
 // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
-#define CUSTOM_STATUS_SCREEN_IMAGE
+//#define CUSTOM_STATUS_SCREEN_IMAGE
 
 // @section machine
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-#define MOTHERBOARD BOARD_CREALITY_V427
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
 /**
@@ -101,7 +99,7 @@
  *
  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  */
-#define SERIAL_PORT 1
+#define SERIAL_PORT 0
 
 /**
  * Serial Port Baud Rate
@@ -114,7 +112,7 @@
  *
  * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  */
-#define BAUDRATE 115200
+#define BAUDRATE 250000
 
 //#define BAUD_RATE_GCODE     // Enable G-code M575 to set the baud rate
 
@@ -138,7 +136,7 @@
 //#define BLUETOOTH
 
 // Name displayed in the LCD "Ready" message and Info menu
-#define CUSTOM_MACHINE_NAME "Ender-3 Pro 4.2.7"
+//#define CUSTOM_MACHINE_NAME "3D Printer"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -161,9 +159,9 @@
  *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  */
-#define X_DRIVER_TYPE TMC2208_STANDALONE
+#define X_DRIVER_TYPE  A4988
-#define Y_DRIVER_TYPE TMC2208_STANDALONE
+#define Y_DRIVER_TYPE  A4988
-#define Z_DRIVER_TYPE TMC2208_STANDALONE
+#define Z_DRIVER_TYPE  A4988
 //#define X2_DRIVER_TYPE A4988
 //#define Y2_DRIVER_TYPE A4988
 //#define Z2_DRIVER_TYPE A4988
@@ -175,7 +173,7 @@
 //#define U_DRIVER_TYPE  A4988
 //#define V_DRIVER_TYPE  A4988
 //#define W_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE TMC2208_STANDALONE
+#define E0_DRIVER_TYPE A4988
 //#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
@@ -642,7 +640,7 @@
 #define HEATER_5_MAXTEMP 275
 #define HEATER_6_MAXTEMP 275
 #define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP 125
+#define BED_MAXTEMP      150
 #define CHAMBER_MAXTEMP  60
 
 /**
@@ -679,17 +677,16 @@
   //#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
                                   // Set/get with G-code: M301 E[extruder number, 0-2]
 
-// Creality Ender-3
   #if ENABLED(PID_PARAMS_PER_HOTEND)
     // Specify up to one value per hotend here, according to your setup.
     // If there are fewer values, the last one applies to the remaining hotends.
-#define DEFAULT_Kp_LIST {21.73, 21.73}
+    #define DEFAULT_Kp_LIST {  22.20,  22.20 }
-#define DEFAULT_Ki_LIST {1.54, 1.54}
+    #define DEFAULT_Ki_LIST {   1.08,   1.08 }
-#define DEFAULT_Kd_LIST {76.55, 76.55}
+    #define DEFAULT_Kd_LIST { 114.00, 114.00 }
   #else
-#define DEFAULT_Kp 21.73
+    #define DEFAULT_Kp  22.20
-#define DEFAULT_Ki 1.54
+    #define DEFAULT_Ki   1.08
-#define DEFAULT_Kd 76.55
+    #define DEFAULT_Kd 114.00
   #endif
 #else
   #define BANG_MAX 255    // Limit hotend current while in bang-bang mode; 255=full current
@@ -836,8 +833,8 @@
   #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
                                   // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
 
-#define PID_EDIT_MENU     // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
+  //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
-#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
+  //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
 #endif
 
 // @section safety
@@ -1199,14 +1196,14 @@
  * Override with M92
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 93}
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
 
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25}
+#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -1219,7 +1216,7 @@
  * Override with M201
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION {500, 500, 100, 5000}
+#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1234,9 +1231,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION 500         // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
+#define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION 500  // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)
@@ -1276,7 +1273,7 @@
  *   https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  */
 #if DISABLED(CLASSIC_JERK)
-#define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge
+  #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
   #define JD_HANDLE_SMALL_SEGMENTS    // Use curvature estimation instead of just the junction angle
                                       // for small segments (< 1mm) with large junction angles (> 135°).
 #endif
@@ -1305,10 +1302,10 @@
  * The probe replaces the Z-MIN endstop and is used for Z homing.
  * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
  */
-// #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
 
 // Force the use of the probe for Z-axis homing
-#define USE_PROBE_FOR_Z_HOMING
+//#define USE_PROBE_FOR_Z_HOMING
 
 /**
  * Z_MIN_PROBE_PIN
@@ -1362,7 +1359,7 @@
 /**
  * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  */
-#define BLTOUCH
+//#define BLTOUCH
 
 /**
  * MagLev V4 probe by MDD
@@ -1415,46 +1412,16 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
-#define MAG_MOUNTED_DEPLOY_1                \
+  #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
-  {                                         \
+  #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
-    PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } \
+  #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
-  } // Move to side Dock & Attach probe
+  #define MAG_MOUNTED_DEPLOY_4 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
-#define MAG_MOUNTED_DEPLOY_2                \
+  #define MAG_MOUNTED_DEPLOY_5 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
-  {                                         \
+  #define MAG_MOUNTED_STOW_1   { PROBE_STOW_FEEDRATE,   { 245, 114, 20 } }  // Move to dock
-    PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } \
+  #define MAG_MOUNTED_STOW_2   { PROBE_STOW_FEEDRATE,   { 245, 114,  0 } }  // Place probe beside remover
-  } // Move probe off dock
+  #define MAG_MOUNTED_STOW_3   { PROBE_STOW_FEEDRATE,   { 230, 114,  0 } }  // Side move to remove probe
-#define MAG_MOUNTED_DEPLOY_3           \
+  #define MAG_MOUNTED_STOW_4   { PROBE_STOW_FEEDRATE,   { 210, 114, 20 } }  // Side move to remove probe
-  {                                    \
+  #define MAG_MOUNTED_STOW_5   { PROBE_STOW_FEEDRATE,   {   0,   0,  0 } }  // Extra move if needed
-    PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } \
-  } // Extra move if needed
-#define MAG_MOUNTED_DEPLOY_4           \
-  {                                    \
-    PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } \
-  } // Extra move if needed
-#define MAG_MOUNTED_DEPLOY_5           \
-  {                                    \
-    PROBE_DEPLOY_FEEDRATE, { 0, 0, 0 } \
-  } // Extra move if needed
-#define MAG_MOUNTED_STOW_1                \
-  {                                       \
-    PROBE_STOW_FEEDRATE, { 245, 114, 20 } \
-  } // Move to dock
-#define MAG_MOUNTED_STOW_2               \
-  {                                      \
-    PROBE_STOW_FEEDRATE, { 245, 114, 0 } \
-  } // Place probe beside remover
-#define MAG_MOUNTED_STOW_3               \
-  {                                      \
-    PROBE_STOW_FEEDRATE, { 230, 114, 0 } \
-  } // Side move to remove probe
-#define MAG_MOUNTED_STOW_4                \
-  {                                       \
-    PROBE_STOW_FEEDRATE, { 210, 114, 20 } \
-  } // Side move to remove probe
-#define MAG_MOUNTED_STOW_5           \
-  {                                  \
-    PROBE_STOW_FEEDRATE, { 0, 0, 0 } \
-  } // Extra move if needed
 #endif
 
 // Duet Smart Effector (for delta printers) - https://docs.duet3d.com/en/Duet3D_hardware/Accessories/Smart_Effector
@@ -1544,7 +1511,7 @@
  *     |    [-]    |
  *     O-- FRONT --+
  */
-#define NOZZLE_TO_PROBE_OFFSET { -46.63, -5.12, 0 }
+#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
 
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
@@ -1696,14 +1663,14 @@
 // @section extruder
 
 //#define DISABLE_E               // Disable the extruder when not stepping
-// #define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
 #define INVERT_X_DIR false
-#define INVERT_Y_DIR false
+#define INVERT_Y_DIR true
-#define INVERT_Z_DIR true
+#define INVERT_Z_DIR false
 //#define INVERT_I_DIR false
 //#define INVERT_J_DIR false
 //#define INVERT_K_DIR false
@@ -1755,8 +1722,8 @@
 // @section geometry
 
 // The size of the printable area
-#define X_BED_SIZE 235
+#define X_BED_SIZE 200
-#define Y_BED_SIZE 235
+#define Y_BED_SIZE 200
 
 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
@@ -1764,7 +1731,7 @@
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 250
+#define Z_MAX_POS 200
 //#define I_MIN_POS 0
 //#define I_MAX_POS 50
 //#define J_MIN_POS 0
@@ -1934,7 +1901,7 @@
  */
 //#define AUTO_BED_LEVELING_3POINT
 //#define AUTO_BED_LEVELING_LINEAR
-#define AUTO_BED_LEVELING_BILINEAR
+//#define AUTO_BED_LEVELING_BILINEAR
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
@@ -1955,10 +1922,10 @@
 /**
  * Auto-leveling needs preheating
  */
-#define PREHEAT_BEFORE_LEVELING
+//#define PREHEAT_BEFORE_LEVELING
 #if ENABLED(PREHEAT_BEFORE_LEVELING)
   #define LEVELING_NOZZLE_TEMP 120   // (°C) Only applies to E0 at this time
-#define LEVELING_BED_TEMP 60
+  #define LEVELING_BED_TEMP     50
 #endif
 
 /**
@@ -2020,7 +1987,7 @@
 #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
-#define GRID_MAX_POINTS_X 5
+  #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Probe along the Y axis, advancing X after each column
@@ -2151,7 +2118,7 @@
  * - Allows Z homing only when XY positions are known and trusted.
  * - If stepper drivers sleep, XY homing may be required again before Z homing.
  */
-#define Z_SAFE_HOMING
+//#define Z_SAFE_HOMING
 
 #if ENABLED(Z_SAFE_HOMING)
   #define Z_SAFE_HOMING_X_POINT X_CENTER  // (mm) X point for Z homing
@@ -2159,7 +2126,7 @@
 #endif
 
 // Homing speeds (linear=mm/min, rotational=°/min)
-#define HOMING_FEEDRATE_MM_M {(20 * 60), (20 * 60), (4 * 60)}
+#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
 
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS
@@ -2237,7 +2204,7 @@
  *   M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  *   M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  */
-#define EEPROM_SETTINGS // Persistent storage with M500 and M501
+//#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of flash. Disable for release!
 #define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save flash.
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
@@ -2276,16 +2243,16 @@
 // Preheat Constants - Up to 10 are supported without changes
 //
 #define PREHEAT_1_LABEL       "PLA"
-#define PREHEAT_1_TEMP_HOTEND 185
+#define PREHEAT_1_TEMP_HOTEND 180
-#define PREHEAT_1_TEMP_BED 60
+#define PREHEAT_1_TEMP_BED     70
 #define PREHEAT_1_TEMP_CHAMBER 35
-#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
+#define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255
 
 #define PREHEAT_2_LABEL       "ABS"
 #define PREHEAT_2_TEMP_HOTEND 240
-#define PREHEAT_2_TEMP_BED 70
+#define PREHEAT_2_TEMP_BED    110
 #define PREHEAT_2_TEMP_CHAMBER 35
-#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
+#define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
 // @section motion
 
@@ -2506,7 +2473,7 @@
  *
  * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  */
-#define DISPLAY_CHARSET_HD44780 WESTERN
+#define DISPLAY_CHARSET_HD44780 JAPANESE
 
 /**
  * Info Screen Style (0:Classic, 1:Průša)
@@ -2521,14 +2488,14 @@
  * SD Card support is disabled by default. If your controller has an SD slot,
  * you must uncomment the following option or it won't work.
  */
-#define SDSUPPORT
+//#define SDSUPPORT
 
 /**
  * SD CARD: ENABLE CRC
  *
  * Use CRC checks and retries on the SD communication.
  */
-#define SD_CHECK_AND_RETRY
+//#define SD_CHECK_AND_RETRY
 
 /**
  * LCD Menu Items
@@ -2610,7 +2577,7 @@
 // If you have a speaker that can produce tones, enable it here.
 // By default Marlin assumes you have a buzzer with a fixed frequency.
 //
-#define SPEAKER
+//#define SPEAKER
 
 //
 // The duration and frequency for the UI feedback sound.
@@ -2899,10 +2866,7 @@
 //
 // Connect to EXP1 on RAMPS and compatible boards.
 //
-#define CR10_STOCKDISPLAY
+//#define CR10_STOCKDISPLAY
-#if ENABLED(CR10_STOCKDISPLAY)
-#define RET6_12864_LCD // Specific to the SoC (can either be RET / VET)
-#endif
 
 //
 // Ender-2 OEM display, a variant of the MKS_MINI_12864
@@ -3291,7 +3255,7 @@
 // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
 // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
 // is too low, you should also increment SOFT_PWM_SCALE.
-#define FAN_SOFT_PWM
+//#define FAN_SOFT_PWM
 
 // Incrementing this by 1 will double the software PWM frequency,
 // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.

Marlin/Configuration_adv.h

@@ -21,8 +21,6 @@
  */
 #pragma once
 
-#define CONFIG_EXAMPLES_DIR "config/examples/Creality/Ender-3 Pro/CrealityV427"
-
 /**
  * Configuration_adv.h
  *
@@ -887,7 +885,7 @@
 //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (linear=mm, rotational=°) Backoff from endstops after homing
 //#define XY_COUNTERPART_BACKOFF_MM 0         // (mm) Backoff X after homing Y, and vice-versa
 
-#define QUICK_HOME // If G28 contains XY do a diagonal move first
+//#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
 //#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
 //#define HOME_Z_FIRST                        // Home Z first. Requires a real endstop (not a probe).
 //#define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
@@ -961,6 +959,7 @@
    */
   //#define BLTOUCH_HS_MODE true
 
+
 #endif // BLTOUCH
 
 // @section calibration
@@ -1035,10 +1034,7 @@
 #if ENABLED(ASSISTED_TRAMMING)
 
   // Define from 3 to 9 points to probe.
-#define TRAMMING_POINT_XY                        \
+  #define TRAMMING_POINT_XY { {  20, 20 }, { 180,  20 }, { 180, 180 }, { 20, 180 } }
-  {                                              \
-    {20, 20}, {180, 20}, {180, 180}, { 20, 180 } \
-  }
 
   // Define position names for probe points.
   #define TRAMMING_POINT_NAME_1 "Front-Left"
@@ -1382,7 +1378,7 @@
 //#define LCD_BACKLIGHT_TIMEOUT_MINS 1  // (minutes) Timeout before turning off the backlight
 
 #if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
-#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
+  //#define PROBE_OFFSET_WIZARD       // Add a Probe Z Offset calibration option to the LCD menu
   #if ENABLED(PROBE_OFFSET_WIZARD)
     /**
      * Enable to init the Probe Z-Offset when starting the Wizard.
@@ -1418,7 +1414,7 @@
   #endif
 
   // Include a page of printer information in the LCD Main Menu
-#define LCD_INFO_MENU
+  //#define LCD_INFO_MENU
   #if ENABLED(LCD_INFO_MENU)
     //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
   #endif
@@ -1448,7 +1444,7 @@
   #endif
 
   // Scroll a longer status message into view
-#define STATUS_MESSAGE_SCROLLING
+  //#define STATUS_MESSAGE_SCROLLING
 
   // Apply a timeout to low-priority status messages
   //#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
@@ -1643,7 +1639,7 @@
   //#define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
   //#define M20_TIMESTAMP_SUPPORT         // Include timestamps by adding the 'T' flag to M20 commands
 
-#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES         // Scroll long filenames in the SD card menu
 
   //#define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)
 
@@ -2067,7 +2063,7 @@
  *
  * Warning: Does not respect endstops!
  */
-#define BABYSTEPPING
+//#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
   //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
   //#define BABYSTEP_WITHOUT_HOMING
@@ -2078,7 +2074,7 @@
   #define BABYSTEP_MULTIPLICATOR_Z  1       // (steps or mm) Steps or millimeter distance for each Z babystep
   #define BABYSTEP_MULTIPLICATOR_XY 1       // (steps or mm) Steps or millimeter distance for each XY babystep
 
-#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
   #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
     #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
                                             // Note: Extra time may be added to mitigate controller latency.
@@ -2735,7 +2731,7 @@
   #define INTERPOLATE      true
 
   #if AXIS_IS_TMC_CONFIG(X)
-#define X_CURRENT 580            // (mA) RMS current. Multiply by 1.414 for peak current.
+    #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
     #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for sensorless homing
     #define X_MICROSTEPS     16        // 0..256
     #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
@@ -2755,7 +2751,7 @@
   #endif
 
   #if AXIS_IS_TMC_CONFIG(Y)
-#define Y_CURRENT 580
+    #define Y_CURRENT       800
     #define Y_CURRENT_HOME  Y_CURRENT
     #define Y_MICROSTEPS     16
     #define Y_RSENSE          0.11
@@ -2775,7 +2771,7 @@
   #endif
 
   #if AXIS_IS_TMC_CONFIG(Z)
-#define Z_CURRENT 580
+    #define Z_CURRENT       800
     #define Z_CURRENT_HOME  Z_CURRENT
     #define Z_MICROSTEPS     16
     #define Z_RSENSE          0.11
@@ -2875,7 +2871,7 @@
   #endif
 
   #if AXIS_IS_TMC_CONFIG(E0)
-#define E0_CURRENT 650
+    #define E0_CURRENT      800
     #define E0_MICROSTEPS    16
     #define E0_RSENSE         0.11
     #define E0_CHAIN_POS     -1
@@ -3066,7 +3062,7 @@
    * Define your own with:
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-#define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below)
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
   //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
   //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
   //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
@@ -3229,9 +3225,7 @@
    *   stepperY.intpol(0); \
    * }
    */
-#define TMC_ADV() \
+  #define TMC_ADV() {  }
-  {               \
-  }
 
 #endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
 

Marlin/_Bootscreen.h

@@ -1,97 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Custom Boot Screen bitmap
- *
- * Place this file in the root with your configuration files
- * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
- *
- * Use the Marlin Bitmap Converter to make your own:
- * https://marlinfw.org/tools/u8glib/converter.html
- */
-
-#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
-#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
-#define CUSTOM_BOOTSCREEN_INVERTED
-
-const unsigned char custom_start_bmp[] PROGMEM = {
-  B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
-  B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
-  B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
-  B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
-  B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
-  B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
-  B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
-  B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
-  B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
-  B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
-  B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
-  B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
-  B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
-  B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
-  B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
-  B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
-  B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
-  B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
-  B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
-  B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
-  B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
-  B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
-  B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
-};

Marlin/_Statusscreen.h

@@ -1,71 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Custom Status Screen bitmap
- *
- * Place this file in the root with your configuration files
- * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
- *
- * Use the Marlin Bitmap Converter to make your own:
- * https://marlinfw.org/tools/u8glib/converter.html
- */
-
-//
-// Status Screen Logo bitmap
-//
-#define STATUS_LOGO_Y            8
-#define STATUS_LOGO_WIDTH       39
-
-const unsigned char status_logo_bmp[] PROGMEM = {
-  B11111000,B00000001,B10000000,B00000000,B00001100,
-  B01001000,B00000000,B10000000,B00000000,B00010010,
-  B01000011,B11000011,B10001100,B11010000,B00000010,
-  B01110001,B00100100,B10010010,B01100111,B11001100,
-  B01000001,B00100100,B10011110,B01000000,B00000010,
-  B01001001,B00100100,B10010000,B01000000,B00010010,
-  B11111011,B10110011,B11001110,B11100000,B00001100,
-  B00000000,B00000000,B00000000,B00000000,B00000000,
-  B00000000,B00000000,B00000000,B00000000,B00000000,
-  B00000000,B00000011,B10000000,B00000000,B00000000,
-  B00000000,B00000010,B01000000,B00000000,B00000000,
-  B00000000,B00000010,B01010110,B01100000,B00000000,
-  B00000000,B00000011,B10011000,B10010000,B00000000,
-  B00000000,B00000010,B00010000,B10010000,B00000000,
-  B00000000,B00000010,B00010000,B10010000,B00000000,
-  B00000000,B00000010,B00010000,B01100000,B00000000
-};
-
-//
-// Use default bitmaps
-//
-#define STATUS_HOTEND_ANIM
-#define STATUS_BED_ANIM
-#define STATUS_HEATERS_XSPACE   20
-#if HOTENDS < 2
-  #define STATUS_HEATERS_X      48
-  #define STATUS_BED_X          72
-#else
-  #define STATUS_HEATERS_X      40
-  #define STATUS_BED_X          80
-#endif

Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h

@@ -160,7 +160,8 @@
   #define LCD_BRIGHTNESS_DEFAULT TFT_BACKLIGHT_PWM
 #endif
 
-#if ENABLED(ONBOARD_SDIO)
+#if SD_CONNECTION_IS(ONBOARD)
+  #define ONBOARD_SDIO
   #define SD_SS_PIN                         -1    // else SDSS set to PA4 in M43 (spi_pins.h)
 #endif