Update .gitignore

🔖 Marlin 2.0.3.1
🔨 PlatformIO 6 compatibility
2023-12-27 15:25:27 -06:00 · 2023-07-20 14:16:17 -05:00 · 2023-07-20 14:16:17 -05:00 · 2020-01-30 19:08:05 -06:00 · 2020-01-30 19:08:01 -06:00 · 2020-01-30 19:07:46 -06:00
1329 changed files with 22361 additions and 27193 deletions
--- a/.editorconfig
+++ b/.editorconfig
@@ -1,19 +0,0 @@
-# editorconfig.org
-root = true
-
-[{*.patch,syntax_test_*}]
-trim_trailing_whitespace = false
-
-[{*.c,*.cpp,*.h}]
-charset = utf-8
-
-[{*.c,*.cpp,*.h,Makefile}]
-trim_trailing_whitespace = true
-insert_final_newline = true
-end_of_line = lf
-indent_style = space
-indent_size = 2
-
-[{*.py,*.conf,*.sublime-project}]
-indent_style = tab
-indent_size = 4
--- a/.github/issue_template.md
+++ b/.github/issue_template.md
@@ -1,16 +1,31 @@
-# NO SUPPORT REQUESTS PLEASE
+<!--

-Support Requests posted here will be automatically closed!
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md

-This Issue Queue is for Marlin bug reports and development-related issues, and we prefer not to handle user-support questions here. See https://github.com/MarlinFirmware/Marlin/blob/1.1.x/.github/contributing.md#i-dont-want-to-read-this-whole-thing-i-just-have-a-question.
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.

-For best results getting help with configuration and troubleshooting, please use the following resources:
+Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.

- RepRap.org Marlin Forum http://forums.reprap.org/list.php?415
- Tom's 3D Forums https://discuss.toms3d.org/
- Facebook Group "Marlin Firmware" https://www.facebook.com/groups/1049718498464482/
- Facebook Group "Marlin Firmware for 3D Printers" https://www.facebook.com/groups/3Dtechtalk/
- Marlin Configuration https://www.youtube.com/results?search_query=marlin+configuration on YouTube
- Marlin Discord server. Join link: https://discord.gg/n5NJ59y
+-->

-After seeking help from the community, if the consensus points to to a bug in Marlin, then you should post a Bug Report at https://github.com/MarlinFirmware/Marlin/issues/new/choose).
+### Description
+
+<!-- Description of the bug or requested feature -->
+
+### Steps to Reproduce
+
+<!-- If this is a Bug Report, please describe the steps needed to reproduce the issue -->
+
+1. [First Step]
+2. [Second Step]
+3. [and so on...]
+
+**Expected behavior:** [What you expect to happen]
+
+**Actual behavior:** [What actually happens]
+
+#### Additional Information
+
+* Include a ZIP file containing your `Configuration.h` and `Configuration_adv.h` files.
+* Provide pictures or links to videos that clearly demonstrate the issue.
+* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.
--- a/.github/labeler.yml
+++ b/.github/labeler.yml
@@ -0,0 +1,18 @@
+# Add '@domain/core' label to any change within the 'core' package
+enhancement:
+  - .github
+
+# Add 'test' label to any change to *.spec.js files within the source dir
+"C: Motion":
+  - src/module/motion.*
+  - src/module/planner.*
+  - src/module/stepper.*
+
+"C: G-code Parser":
+  - src/gcode/**
+
+"PR: Configurations":
+  - config/examples/**
+
+"T: 32-Bit & HAL":
+  - src/HAL/**
--- a/.github/workflows/bump-date.yml
+++ b/.github/workflows/bump-date.yml
@@ -11,8 +11,6 @@ on:

 jobs:
  bump_date:
-    name: Bump Distribution Date
-    if: github.repository == 'MarlinFirmware/Marlin'

    runs-on: ubuntu-latest

@@ -26,6 +24,7 @@ jobs:
    - name: Bump Distribution Date
      run: |
        # Inline Bump Script
+        [[ "$GITHUB_REPOSITORY" == "MarlinFirmware/Marlin" ]] || exit 0
        DIST=$( date +"%Y-%m-%d" )
        eval "sed -E -i 's/(#define +STRING_DISTRIBUTION_DATE) .*$/\1 \"$DIST\"/g' Marlin/src/inc/Version.h" && \
        git config user.name "${GITHUB_ACTOR}" && \
--- a/.github/workflows/check-pr.yml
+++ b/.github/workflows/check-pr.yml
@@ -1,9 +1,9 @@
 #
 # check-pr.yml
-# Close PRs directed at release branches
+# Add a comment to the PR if it's directed to a release branch
 #

-name: PR Bad Target
+name: Check PR

 on:
  pull_request:
@@ -13,21 +13,19 @@ on:
    - 2.0.x

 jobs:
-  bad_target:
-    name: PR Bad Target
-    if: github.repository == 'MarlinFirmware/Marlin'
+  check_pr:

    runs-on: ubuntu-latest

    steps:
-    - uses: peter-evans/close-pull@v1
+    - name: Comment on PR
+      uses: unsplash/comment-on-pr@master
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
      with:
-        delete-branch: false
-        comment: >
-          Thanks for your contribution! Unfortunately we can't accept PRs directed at release branches. We make patches to the bugfix branches and only later do we push them out as releases.
-
-          Please redo this PR starting with the `bugfix-2.0.x` branch and be careful to target `bugfix-2.0.x` when resubmitting the PR.
-
-          It may help to set your fork's default branch to `bugfix-2.0.x`.
-
-          See [this page](http://marlinfw.org/docs/development/getting_started_pull_requests.html) for full instructions.
+        msg: "<p>Thanks for your contribution! \
+              Unfortunately we can't accept PRs directed at release branches. \
+              We make patches to the bugfix branches and only later do we push them out as releases. \
+              Please redo this PR starting with the `bugfix-2.0.x` branch and be careful to target `bugfix-2.0.x` when resubmitting the PR.</p> \
+              <p>It may help to set your fork's default branch to `bugfix-2.0.x`.</p> \
+              <p>See <a href='http://marlinfw.org/docs/development/getting_started_pull_requests.html' target='_blank'>this page</a> for full instructions.</p>"
--- a/.github/workflows/close-stale.yml
+++ b/.github/workflows/close-stale.yml
@@ -1,27 +0,0 @@
-#
-# close-stale.yml
-# Close open issues after a period of inactivity
-#
-
-name: Close Stale Issues
-
-on:
-  schedule:
-  - cron: "22 1 * * *"
-
-jobs:
-  stale:
-    name: Close Stale Issues
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: actions/stale@v3
-      with:
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        stale-issue-message: 'This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days.'
-        days-before-stale: 30
-        days-before-close: 5
-        stale-issue-label: 'stale-closing-soon'
-        exempt-issue-labels: 'T: Feature Request'
--- a/.github/workflows/label-pr.yml
+++ b/.github/workflows/label-pr.yml
@@ -0,0 +1,23 @@
+#
+# label-pr.yml
+# Automatically close the PR if it's directed to a release branch
+#
+
+name: Apply Labels
+
+on:
+  pull_request:
+    branches:
+    - bugfix-1.1.x
+    - bugfix-2.0.x
+    - dev-2.1.x
+
+jobs:
+  apply_labels:
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/labeler@v2
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"
--- a/.github/workflows/lock-closed.yml
+++ b/.github/workflows/lock-closed.yml
@@ -1,32 +0,0 @@
-#
-# lock-closed.yml
-# Lock closed issues after a period of inactivity
-#
-
-name: Lock Closed Issues
-
-on:
-  schedule:
-    - cron: '0 1/13 * * *'
-
-jobs:
-  lock:
-    name: Lock Closed Issues
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: dessant/lock-threads@v2
-      with:
-        github-token: ${{ github.token }}
-        process-only: 'issues'
-        issue-lock-inactive-days: '60'
-        issue-exclude-created-before: ''
-        issue-exclude-labels: 'no-locking'
-        issue-lock-labels: ''
-        issue-lock-comment: >
-          This issue has been automatically locked since there
-          has not been any recent activity after it was closed.
-          Please open a new issue for related bugs.
-        issue-lock-reason: ''
--- a/.github/workflows/test-builds.yml
+++ b/.github/workflows/test-builds.yml
@@ -9,14 +9,7 @@ on:
  pull_request:
    branches:
    - bugfix-2.0.x
-    paths-ignore:
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-  push:
-    branches:
-    - bugfix-2.0.x
+    - dev-2.1.x
    paths-ignore:
    - config/**
    - data/**
@@ -25,8 +18,6 @@ on:

 jobs:
  test_builds:
-    name: Run All Tests
-    if: github.repository == 'MarlinFirmware/Marlin'

    runs-on: ubuntu-latest

@@ -38,31 +29,29 @@ jobs:
        - DUE
        - esp32
        - linux_native
-        - mega2560
+        - megaatmega2560
        - teensy31
        - teensy35
-        - SAMD51_grandcentral_m4

        # Extended AVR Environments

        - FYSETC_F6_13
-        - mega1280
+        - megaatmega1280
        - rambo
-        - sanguino1284p
-        - sanguino644p
+        - sanguino_atmega1284p
+        - sanguino_atmega644p

        # Extended STM32 Environments

-        - STM32F103RC_btt
-        - STM32F103RC_btt_USB
-        - STM32F103RE_btt
-        - STM32F103RE_btt_USB
+        - STM32F103RC_bigtree
+        - STM32F103RC_bigtree_USB
+        - STM32F103RE_bigtree
+        - STM32F103RE_bigtree_USB
        - STM32F103RC_fysetc
        - jgaurora_a5s_a1
        - STM32F103VE_longer
        - STM32F407VE_black
        - BIGTREE_SKR_PRO
-        - BIGTREE_GTR_V1_0
        - mks_robin
        - ARMED
        - FYSETC_S6
@@ -86,6 +75,7 @@ jobs:
        #- mks_robin_lite
        #- mks_robin_mini
        #- mks_robin_nano
+        #- SAMD51_grandcentral_m4

    steps:

--- a/.github/workflows/unlock-reopened.yml
+++ b/.github/workflows/unlock-reopened.yml
@@ -1,22 +0,0 @@
-#
-# unlock-reopened.yml
-# Unlock an issue whenever it is re-opened
-#
-
-name: "Unlock reopened issue"
-
-on:
-  issues:
-    types: [reopened]
-
-jobs:
-  unlock:
-    name: Unlock Reopened
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: OSDKDev/unlock-issues@v1.1
-      with:
-        repo-token: "${{ secrets.GITHUB_TOKEN }}"
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -36,7 +36,7 @@
 * Advanced settings can be found in Configuration_adv.h
 *
 */
-#define CONFIGURATION_H_VERSION 020005
+#define CONFIGURATION_H_VERSION 020000

 //===========================================================================
 //============================= Getting Started =============================
@@ -99,7 +99,6 @@
 /**
 * Select the serial port on the board to use for communication with the host.
 * This allows the connection of wireless adapters (for instance) to non-default port pins.
- * Serial port -1 is the USB emulated serial port, if available.
 * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
 *
 * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
@@ -108,6 +107,9 @@

 /**
 * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if available.
+ *
 * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
 */
 //#define SERIAL_PORT_2 -1
@@ -361,7 +363,6 @@
 *   331 : (3.3V scaled thermistor 1 table for MEGA)
 *   332 : (3.3V scaled thermistor 1 table for DUE)
 *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
- *   202 : 200k thermistor - Copymaster 3D
 *     3 : Mendel-parts thermistor (4.7k pullup)
 *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
 *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
@@ -473,7 +474,7 @@
 #if ENABLED(PIDTEMP)
  //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
  //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
-  //#define PID_DEBUG             // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
+  //#define PID_DEBUG             // Sends debug data to the serial port.
  //#define PID_OPENLOOP 1        // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  //#define SLOW_PWM_HEATERS      // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
  //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
@@ -783,8 +784,6 @@
  #define DEFAULT_YJERK 10.0
  #define DEFAULT_ZJERK  0.3

-  //#define TRAVEL_EXTRA_XYJERK 0.0     // Additional jerk allowance for all travel moves
-
  //#define LIMITED_JERK_EDITING        // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
  #if ENABLED(LIMITED_JERK_EDITING)
    #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
@@ -924,14 +923,6 @@
  #define SMART_EFFECTOR_MOD_PIN  -1  // Connect a GPIO pin to the Smart Effector MOD pin
 #endif

-/**
- * Use StallGuard2 to probe the bed with the nozzle.
- * Requires stallGuard-capable Trinamic stepper drivers.
- * CAUTION: This can damage machines with Z lead screws.
- *          Take extreme care when setting up this feature.
- */
-//#define SENSORLESS_PROBING
-
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //
@@ -1074,14 +1065,12 @@

 // @section homing

-//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
+//#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed

-//#define UNKNOWN_Z_NO_RAISE      // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.

-//#define Z_HOMING_HEIGHT  4      // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
-                                  // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
-
-//#define Z_AFTER_HOMING  10      // (mm) Height to move to after homing Z
+//#define Z_HOMING_HEIGHT 4  // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
+                             // Be sure you have this distance over your Z_MAX_POS in case.

 // Direction of endstops when homing; 1=MAX, -1=MIN
 // :[-1,1]
@@ -1243,7 +1232,6 @@
    #define MESH_TEST_HOTEND_TEMP  205    // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
    #define MESH_TEST_BED_TEMP      60    // (°C) Default bed temperature for the G26 Mesh Validation Tool.
    #define G26_XY_FEEDRATE         20    // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
-    #define G26_RETRACT_MULTIPLIER   1.0  // G26 Q (retraction) used by default between mesh test elements.
  #endif

 #endif
@@ -1323,10 +1311,10 @@
 //#define LEVEL_BED_CORNERS

 #if ENABLED(LEVEL_BED_CORNERS)
-  #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
-  #define LEVEL_CORNERS_HEIGHT      0.0   // (mm) Z height of nozzle at leveling points
-  #define LEVEL_CORNERS_Z_HOP       4.0   // (mm) Z height of nozzle between leveling points
-  //#define LEVEL_CENTER_TOO              // Move to the center after the last corner
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
+  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif

 /**
@@ -1445,7 +1433,6 @@
 //#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of PROGMEM. Disable for release!
 #define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save PROGMEM.
-#define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
 #if ENABLED(EEPROM_SETTINGS)
  //#define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
 #endif
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -31,7 +31,7 @@
 * Basic settings can be found in Configuration.h
 *
 */
-#define CONFIGURATION_ADV_H_VERSION 020005
+#define CONFIGURATION_ADV_H_VERSION 020000

 // @section temperature

@@ -276,10 +276,8 @@
  #define AUTOTEMP_OLDWEIGHT 0.98
 #endif

-// Extra options for the M114 "Current Position" report
-//#define M114_DETAIL         // Use 'M114` for details to check planner calculations
-//#define M114_REALTIME       // Real current position based on forward kinematics
-//#define M114_LEGACY         // M114 used to synchronize on every call. Enable if needed.
+// Show extra position information with 'M114 D'
+//#define M114_DETAIL

 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
@@ -338,22 +336,15 @@
 * Controller Fan
 * To cool down the stepper drivers and MOSFETs.
 *
- * The fan turns on automatically whenever any driver is enabled and turns
- * off (or reduces to idle speed) shortly after drivers are turned off.
- *
+ * The fan will turn on automatically whenever any stepper is enabled
+ * and turn off after a set period after all steppers are turned off.
 */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
-  //#define CONTROLLER_FAN_USE_Z_ONLY    // With this option only the Z axis is considered
-  #define CONTROLLERFAN_SPEED_MIN      0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
-  #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
-  #define CONTROLLERFAN_SPEED_IDLE     0 // (0-255) Idle speed, used when motors are disabled
-  #define CONTROLLERFAN_IDLE_TIME     60 // (seconds) Extra time to keep the fan running after disabling motors
-  //#define CONTROLLER_FAN_EDITABLE      // Enable M710 configurable settings
-  #if ENABLED(CONTROLLER_FAN_EDITABLE)
-    #define CONTROLLER_FAN_MENU          // Enable the Controller Fan submenu
-  #endif
+  //#define CONTROLLER_FAN_PIN -1           // Set a custom pin for the controller fan
+  #define CONTROLLERFAN_SECS 60             // Duration in seconds for the fan to run after all motors are disabled
+  #define CONTROLLERFAN_SPEED 255           // 255 == full speed
+  //#define CONTROLLERFAN_SPEED_Z_ONLY 127  // Reduce noise on machines that keep Z enabled
 #endif

 // When first starting the main fan, run it at full speed for the
@@ -677,37 +668,11 @@
 */
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
-  // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
-  // If not defined, probe limits will be used.
-  // Override with 'M422 S<index> X<pos> Y<pos>'
-  //#define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
-
-  /**
-   * Orientation for the automatically-calculated probe positions.
-   * Override Z stepper align points with 'M422 S<index> X<pos> Y<pos>'
-   *
-   * 2 Steppers:  (0)     (1)
-   *               |       |   2   |
-   *               | 1   2 |       |
-   *               |       |   1   |
-   *
-   * 3 Steppers:  (0)     (1)     (2)     (3)
-   *               |   3   | 1     | 2   1 |     2 |
-   *               |       |     3 |       | 3     |
-   *               | 1   2 | 2     |   3   |     1 |
-   *
-   * 4 Steppers:  (0)     (1)     (2)     (3)
-   *               | 4   3 | 1   4 | 2   1 | 3   2 |
-   *               |       |       |       |       |
-   *               | 1   2 | 2   3 | 3   4 | 4   1 |
-   *
-   */
-  #ifndef Z_STEPPER_ALIGN_XY
-    //#define Z_STEPPERS_ORIENTATION 0
-  #endif
+  // Define probe X and Y positions for Z1, Z2 [, Z3]
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }

  // Provide Z stepper positions for more rapid convergence in bed alignment.
-  // Requires triple stepper drivers (i.e., set NUM_Z_STEPPER_DRIVERS to 3)
+  // Currently requires triple stepper drivers.
  //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
  #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
    // Define Stepper XY positions for Z1, Z2, Z3 corresponding to
@@ -715,19 +680,23 @@
    // Define one position per Z stepper in stepper driver order.
    #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
  #else
-    // Amplification factor. Used to scale the correction step up or down in case
-    // the stepper (spindle) position is farther out than the test point.
-    #define Z_STEPPER_ALIGN_AMP 1.0       // Use a value > 1.0 NOTE: This may cause instability!
+    // Amplification factor. Used to scale the correction step up or down.
+    // In case the stepper (spindle) position is further out than the test point.
+    // Use a value > 1. NOTE: This may cause instability
+    #define Z_STEPPER_ALIGN_AMP 1.0
  #endif

+  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_ITERATIONS 3
+
+  // Enable to restore leveling setup after operation
+  #define RESTORE_LEVELING_AFTER_G34
+
  // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
-  #define G34_MAX_GRADE              5    // (%) Maximum incline that G34 will handle
-  #define Z_STEPPER_ALIGN_ITERATIONS 5    // Number of iterations to apply during alignment
-  #define Z_STEPPER_ALIGN_ACC        0.02 // Stop iterating early if the accuracy is better than this
-  #define RESTORE_LEVELING_AFTER_G34      // Restore leveling after G34 is done?
-  // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
-  // Re-homing might be more precise in reproducing the actual 'G28 Z' homing height, especially on an uneven bed.
-  #define HOME_AFTER_G34
+  #define G34_MAX_GRADE  5  // (%) Maximum incline G34 will handle
+
+  // Stop criterion. If the accuracy is better than this stop iterating early
+  #define Z_STEPPER_ALIGN_ACC 0.02
 #endif

 // @section motion
@@ -760,12 +729,8 @@
 // Minimum time that a segment needs to take if the buffer is emptied
 #define DEFAULT_MINSEGMENTTIME        20000   // (ms)

-// Slow down the machine if the look ahead buffer is (by default) half full.
-// Increase the slowdown divisor for larger buffer sizes.
+// If defined the movements slow down when the look ahead buffer is only half full
 #define SLOWDOWN
-#if ENABLED(SLOWDOWN)
-  #define SLOWDOWN_DIVISOR 2
-#endif

 // Frequency limit
 // See nophead's blog for more info
@@ -856,8 +821,8 @@

  // Define the pin to read during calibration
  #ifndef CALIBRATION_PIN
-    //#define CALIBRATION_PIN -1            // Define here to override the default pin
-    #define CALIBRATION_PIN_INVERTING false // Set to true to invert the custom pin
+    #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
+    #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
    //#define CALIBRATION_PIN_PULLDOWN
    #define CALIBRATION_PIN_PULLUP
  #endif
@@ -1006,11 +971,7 @@
 // Show the E position (filament used) during printing
 //#define LCD_SHOW_E_TOTAL

-#if ENABLED(SHOW_BOOTSCREEN)
-  #define BOOTSCREEN_TIMEOUT 4000        // (ms) Total Duration to display the boot screen(s)
-#endif
-
-#if HAS_GRAPHICAL_LCD && EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
+#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
  //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
  //#define SHOW_REMAINING_TIME          // Display estimated time to completion
  #if ENABLED(SHOW_REMAINING_TIME)
@@ -1019,7 +980,7 @@
  #endif
 #endif

-#if HAS_CHARACTER_LCD && EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
+#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
  #if ENABLED(LCD_PROGRESS_BAR)
    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
@@ -1032,9 +993,12 @@

 #if ENABLED(SDSUPPORT)

-  // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
-  // Enable this option and set to HIGH if your SD cards are incorrectly detected.
-  //#define SD_DETECT_STATE HIGH
+  // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
+  // around this by connecting a push button or single throw switch to the pin defined
+  // as SD_DETECT_PIN in your board's pins definitions.
+  // This setting should be disabled unless you are using a push button, pulling the pin to ground.
+  // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
+  #define SD_DETECT_INVERTED

  #define SD_FINISHED_STEPPERRELEASE true          // Disable steppers when SD Print is finished
  #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
@@ -1049,10 +1013,6 @@

  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

-  #if ENABLED(PRINTER_EVENT_LEDS)
-    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
-  #endif
-
  /**
   * Continue after Power-Loss (Creality3D)
   *
@@ -1060,16 +1020,12 @@
   * during SD printing. If the recovery file is found at boot time, present
   * an option on the LCD screen to continue the print from the last-known
   * point in the file.
-   *
-   * If the machine reboots when resuming a print you may need to replace or
-   * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
   */
  //#define POWER_LOSS_RECOVERY
  #if ENABLED(POWER_LOSS_RECOVERY)
-    #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
    //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
    //#define POWER_LOSS_ZRAISE       2 // (mm) Z axis raise on resume (on power loss with UPS)
-    //#define POWER_LOSS_PIN         44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
    //#define POWER_LOSS_PULL           // Set pullup / pulldown as appropriate
    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
@@ -1197,16 +1153,18 @@
  // Add an optimized binary file transfer mode, initiated with 'M28 B1'
  //#define BINARY_FILE_TRANSFER

-  /**
-   * Set this option to one of the following (or the board's defaults apply):
-   *
-   *           LCD - Use the SD drive in the external LCD controller.
-   *       ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
-   *  CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
-   *
-   * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
-   */
-  //#define SDCARD_CONNECTION LCD
+  #if HAS_SDCARD_CONNECTION
+    /**
+     * Set this option to one of the following (or the board's defaults apply):
+     *
+     *           LCD - Use the SD drive in the external LCD controller.
+     *       ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+     *  CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+     *
+     * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+     */
+    //#define SDCARD_CONNECTION LCD
+  #endif

 #endif // SDSUPPORT

@@ -1246,6 +1204,10 @@
  // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  //#define USE_SMALL_INFOFONT

+  // Enable this option and reduce the value to optimize screen updates.
+  // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
+  //#define DOGM_SPI_DELAY_US 5
+
  // Swap the CW/CCW indicators in the graphics overlay
  //#define OVERLAY_GFX_REVERSE

@@ -1262,10 +1224,6 @@
   * This will prevent position updates from being displayed.
   */
  #if ENABLED(U8GLIB_ST7920)
-    // Enable this option and reduce the value to optimize screen updates.
-    // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
-    //#define DOGM_SPI_DELAY_US 5
-
    //#define LIGHTWEIGHT_UI
    #if ENABLED(LIGHTWEIGHT_UI)
      #define STATUS_EXPIRE_SECONDS 20
@@ -1283,7 +1241,6 @@
  #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
  #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
  #define STATUS_CHAMBER_ANIM         // Use a second bitmap to indicate chamber heating
-  //#define STATUS_CUTTER_ANIM        // Use a second bitmap to indicate spindle / laser active
  //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
  //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
@@ -1303,7 +1260,7 @@
 // Additional options for DGUS / DWIN displays
 //
 #if HAS_DGUS_LCD
-  #define DGUS_SERIAL_PORT 3
+  #define DGUS_SERIAL_PORT 2
  #define DGUS_BAUDRATE 115200

  #define DGUS_RX_BUFFER_SIZE 128
@@ -1311,15 +1268,16 @@
  //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS  // Fix Rx overrun situation (Currently only for AVR)

  #define DGUS_UPDATE_INTERVAL_MS  500    // (ms) Interval between automatic screen updates
+  #define BOOTSCREEN_TIMEOUT      3000    // (ms) Duration to display the boot screen

  #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
    #define DGUS_PRINT_FILENAME           // Display the filename during printing
    #define DGUS_PREHEAT_UI               // Display a preheat screen during heatup

    #if ENABLED(DGUS_LCD_UI_FYSETC)
-      //#define DGUS_UI_MOVE_DIS_OPTION   // Disabled by default for UI_FYSETC
+      //#define DUGS_UI_MOVE_DIS_OPTION   // Disabled by default for UI_FYSETC
    #else
-      #define DGUS_UI_MOVE_DIS_OPTION     // Enabled by default for UI_HIPRECY
+      #define DUGS_UI_MOVE_DIS_OPTION     // Enabled by default for UI_HIPRECY
    #endif

    #define DGUS_FILAMENT_LOADUNLOAD
@@ -1356,11 +1314,9 @@
  //#define AO_EXP1_PINMAP    // AlephObjects CLCD UI EXP1 mapping
  //#define AO_EXP2_PINMAP    // AlephObjects CLCD UI EXP2 mapping
  //#define CR10_TFT_PINMAP   // Rudolph Riedel's CR10 pin mapping
-  //#define S6_TFT_PINMAP     // FYSETC S6 pin mapping
-
  //#define OTHER_PIN_LAYOUT  // Define pins manually below
  #if ENABLED(OTHER_PIN_LAYOUT)
-    // Pins for CS and MOD_RESET (PD) must be chosen
+    // The pins for CS and MOD_RESET (PD) must be chosen.
    #define CLCD_MOD_RESET  9
    #define CLCD_SPI_CS    10

@@ -1470,7 +1426,6 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
  //#define BABYSTEP_WITHOUT_HOMING
  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
@@ -1599,10 +1554,10 @@

  // Add additional compensation depending on hotend temperature
  // Note: this values cannot be calibrated and have to be set manually
-  #if ENABLED(PROBE_TEMP_COMPENSATION)
+  #ifdef PROBE_TEMP_COMPENSATION
    // Max temperature that can be reached by heated bed.
    // This is required only for the calibration process.
-    #define PTC_MAX_BED_TEMP BED_MAXTEMP
+    #define PTC_MAX_BED_TEMP 110

    // Park position to wait for probe cooldown
    #define PTC_PARK_POS_X 0.0F
@@ -2039,7 +1994,7 @@
 * TMCStepper library is required to use TMC stepper drivers.
 * https://github.com/teemuatlut/TMCStepper
 */
-#if HAS_TRINAMIC_CONFIG
+#if HAS_TRINAMIC

  #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
  #define INTERPOLATE       true  // Interpolate X/Y/Z_MICROSTEPS to 256
@@ -2326,6 +2281,14 @@
   */
  //#define SENSORLESS_HOMING // StallGuard capable drivers only

+  /**
+   * Use StallGuard2 to probe the bed with the nozzle.
+   *
+   * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
+   *          to move the Z axis. Take extreme care when attempting to enable this feature.
+   */
+  //#define SENSORLESS_PROBING // StallGuard capable drivers only
+
  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
    // TMC2209: 0...255. TMC2130: -64...63
    #define X_STALL_SENSITIVITY  8
@@ -2361,7 +2324,7 @@
   */
  #define TMC_ADV() {  }

-#endif // HAS_TRINAMIC_CONFIG
+#endif // HAS_TRINAMIC

 // @section L64XX

@@ -2802,12 +2765,6 @@
 */
 #define FASTER_GCODE_PARSER

-#if ENABLED(FASTER_GCODE_PARSER)
-  //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
-#endif
-
-//#define GCODE_CASE_INSENSITIVE  // Accept G-code sent to the firmware in lowercase
-
 /**
 * CNC G-code options
 * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
@@ -3007,7 +2964,7 @@
  #define MAX7219_LOAD_PIN  44

  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
-  #define MAX7219_INIT_TEST    2   // Test pattern at startup: 0=none, 1=sweep, 2=spiral
+  #define MAX7219_INIT_TEST    2   // Do a test pattern at initialization (Set to 2 for spiral)
  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
                                   // connector at:  right=0   bottom=-90  top=90  left=180
@@ -3047,19 +3004,11 @@
 //#define ESP3D_WIFISUPPORT   // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib)

 #if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
+  #define WIFI_SSID "Wifi SSID"
+  #define WIFI_PWD  "Wifi Password"
  //#define WEBSUPPORT          // Start a webserver (which may include auto-discovery)
  //#define OTASUPPORT          // Support over-the-air firmware updates
  //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
-
-  /**
-   * To set a default WiFi SSID / Password, create a file called Configuration_Secure.h with
-   * the following defines, customized for your network. This specific file is excluded via
-   * .gitignore to prevent it from accidentally leaking to the public.
-   *
-   *   #define WIFI_SSID "WiFi SSID"
-   *   #define WIFI_PWD  "WiFi Password"
-   */
-  //#include "Configuration_Secure.h" // External file with WiFi SSID / Password
 #endif

 /**
--- a/Marlin/Makefile
+++ b/Marlin/Makefile
@@ -180,95 +180,88 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1105)
 else ifeq ($(HARDWARE_MOTHERBOARD),1106)
 # MKS v1.5 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS v1.6 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-
 # MKS BASE 1.0 with Heroic HR4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1109)
+else ifeq ($(HARDWARE_MOTHERBOARD),1108)
 # MKS GEN v1.3 or 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1110)
+else ifeq ($(HARDWARE_MOTHERBOARD),1109)
 # MKS GEN L
-else ifeq ($(HARDWARE_MOTHERBOARD),1111)
+else ifeq ($(HARDWARE_MOTHERBOARD),1110)
 # zrib V2.0 control board (Chinese knock off RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1112)
+else ifeq ($(HARDWARE_MOTHERBOARD),1111)
 # BigTreeTech or BIQU KFB2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1113)
+else ifeq ($(HARDWARE_MOTHERBOARD),1112)
 # Felix 2.0+ Electronics Board (RAMPS like)
-else ifeq ($(HARDWARE_MOTHERBOARD),1114)
+else ifeq ($(HARDWARE_MOTHERBOARD),1113)
 # Invent-A-Part RigidBoard
-else ifeq ($(HARDWARE_MOTHERBOARD),1115)
+else ifeq ($(HARDWARE_MOTHERBOARD),1114)
 # Invent-A-Part RigidBoard V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1116)
+else ifeq ($(HARDWARE_MOTHERBOARD),1115)
 # Sainsmart 2-in-1 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1117)
+else ifeq ($(HARDWARE_MOTHERBOARD),1116)
 # Ultimaker
-else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+else ifeq ($(HARDWARE_MOTHERBOARD),1117)
 # Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
+else ifeq ($(HARDWARE_MOTHERBOARD),1118)
  MCU ?= atmega1280

 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1120)
+else ifeq ($(HARDWARE_MOTHERBOARD),1119)
 # Azteeg X3 Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
+else ifeq ($(HARDWARE_MOTHERBOARD),1120)
 # Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+else ifeq ($(HARDWARE_MOTHERBOARD),1121)
 # Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
+else ifeq ($(HARDWARE_MOTHERBOARD),1122)
 # Raise3D Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1124)
+else ifeq ($(HARDWARE_MOTHERBOARD),1123)
 # Rapide Lite RL200 Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1125)
+else ifeq ($(HARDWARE_MOTHERBOARD),1124)
 # Formbot T-Rex 2 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1126)
+else ifeq ($(HARDWARE_MOTHERBOARD),1125)
 # Formbot T-Rex 3
-else ifeq ($(HARDWARE_MOTHERBOARD),1127)
+else ifeq ($(HARDWARE_MOTHERBOARD),1126)
 # Formbot Raptor
-else ifeq ($(HARDWARE_MOTHERBOARD),1128)
+else ifeq ($(HARDWARE_MOTHERBOARD),1127)
 # Formbot Raptor 2
-else ifeq ($(HARDWARE_MOTHERBOARD),1129)
+else ifeq ($(HARDWARE_MOTHERBOARD),1128)
 # bq ZUM Mega 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1130)
+else ifeq ($(HARDWARE_MOTHERBOARD),1129)
 # MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-else ifeq ($(HARDWARE_MOTHERBOARD),1131)
+else ifeq ($(HARDWARE_MOTHERBOARD),1130)
 # TriGorilla Anycubic version 1.3 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1132)
+else ifeq ($(HARDWARE_MOTHERBOARD),1131)
 # TriGorilla Anycubic version 1.4 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1133)
+else ifeq ($(HARDWARE_MOTHERBOARD),1132)
 # TriGorilla Anycubic version 1.4 Rev 1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1134)
+else ifeq ($(HARDWARE_MOTHERBOARD),1133)
 # Creality: Ender-4, CR-8
-else ifeq ($(HARDWARE_MOTHERBOARD),1135)
+else ifeq ($(HARDWARE_MOTHERBOARD),1134)
 # Creality: CR10S, CR20, CR-X
-else ifeq ($(HARDWARE_MOTHERBOARD),1136)
+else ifeq ($(HARDWARE_MOTHERBOARD),1135)
 # Dagoma F5
+else ifeq ($(HARDWARE_MOTHERBOARD),1136)
+# FYSETC F6
 else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# FYSETC F6 1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# FYSETC F6 1.5
-else ifeq ($(HARDWARE_MOTHERBOARD),1139)
 # Duplicator i3 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1140)
+else ifeq ($(HARDWARE_MOTHERBOARD),1138)
 # VORON
-else ifeq ($(HARDWARE_MOTHERBOARD),1141)
+else ifeq ($(HARDWARE_MOTHERBOARD),1139)
 # TRONXY V3 1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1142)
+else ifeq ($(HARDWARE_MOTHERBOARD),1140)
 # Z-Bolt X Series
-else ifeq ($(HARDWARE_MOTHERBOARD),1143)
+else ifeq ($(HARDWARE_MOTHERBOARD),1141)
 # TT OSCAR
-else ifeq ($(HARDWARE_MOTHERBOARD),1144)
+else ifeq ($(HARDWARE_MOTHERBOARD),1142)
 # Overlord/Overlord Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1145)
+else ifeq ($(HARDWARE_MOTHERBOARD),1143)
 # ADIMLab Gantry v1
-else ifeq ($(HARDWARE_MOTHERBOARD),1146)
+else ifeq ($(HARDWARE_MOTHERBOARD),1144)
 # ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1147)
+else ifeq ($(HARDWARE_MOTHERBOARD),1145)
 # BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1148)
+else ifeq ($(HARDWARE_MOTHERBOARD),1146)
 # MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
+else ifeq ($(HARDWARE_MOTHERBOARD),1147)

 #
 # RAMBo and derivatives
--- a/Marlin/Version.h
+++ b/Marlin/Version.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -28,7 +28,7 @@
 /**
 * Marlin release version identifier
 */
-//#define SHORT_BUILD_VERSION "2.0.5.5"
+//#define SHORT_BUILD_VERSION "2.0.3.1"

 /**
 * Verbose version identifier which should contain a reference to the location
@@ -41,7 +41,7 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2023-07-18"
+//#define STRING_DISTRIBUTION_DATE "2020-01-31"

 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
--- a/Marlin/src/HAL/DUE/fastio/G2_PWM.cpp
+++ b/Marlin/src/HAL/DUE/fastio/G2_PWM.cpp
@@ -1,206 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * The PWM module is only used to generate interrupts at specified times. It
- * is NOT used to directly toggle pins. The ISR writes to the pin assigned to
- * that interrupt.
- *
- * All PWMs use the same repetition rate.  The G2 needs about 10KHz min in order to
- * not have obvious ripple on the Vref signals.
- *
- * The data structures are setup to minimize the computation done by the ISR which
- * minimizes ISR execution time.  Execution times are 0.8 to 1.1 microseconds.
- *
- * FIve PWM interrupt sources are used.  Channel 0 sets the base period.  All Vref
- * signals are set active when this counter overflows and resets to zero.  The compare
- * values in channels 1-4 are set to give the desired duty cycle for that Vref pin.
- * When counter 0 matches the compare value then that channel generates an interrupt.
- * The ISR checks the source of the interrupt and sets the corresponding pin inactive.
- *
- * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
- */
-
-#include "../../../inc/MarlinConfig.h"
-
-#if MB(PRINTRBOARD_G2)
-
-#include "G2_PWM.h"
-
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-  #define G2_PWM_X 1
-#else
-  #define G2_PWM_X 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-  #define G2_PWM_Y 1
-#else
-  #define G2_PWM_Y 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
-  #define G2_PWM_Z 1
-#else
-  #define G2_PWM_Z 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
-  #define G2_PWM_E 1
-#else
-  #define G2_PWM_E 0
-#endif
-#define G2_MASK_X(V) (G2_PWM_X * (V))
-#define G2_MASK_Y(V) (G2_PWM_Y * (V))
-#define G2_MASK_Z(V) (G2_PWM_Z * (V))
-#define G2_MASK_E(V) (G2_PWM_E * (V))
-
-volatile uint32_t *SODR_A = &PIOA->PIO_SODR,
-                  *SODR_B = &PIOB->PIO_SODR,
-                  *CODR_A = &PIOA->PIO_CODR,
-                  *CODR_B = &PIOB->PIO_CODR;
-
-PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
-
-void Stepper::digipot_init() {
-
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
-  #endif
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
-  #endif
-  #if G2_PWM_Z
-    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
-  #endif
-  #if G2_PWM_E
-    OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
-  #endif
-
-  #define WPKEY          (0x50574D << 8) // “PWM” in ASCII
-  #define WPCMD_DIS_SW   0  // command to disable Write Protect SW
-  #define WPRG_ALL       (PWM_WPCR_WPRG0 | PWM_WPCR_WPRG1 | PWM_WPCR_WPRG2 | PWM_WPCR_WPRG3 | PWM_WPCR_WPRG4 | PWM_WPCR_WPRG5)  // all Write Protect Groups
-
-  #define PWM_CLOCK_F    F_CPU / 1000000UL   // set clock to 1MHz
-
-  PMC->PMC_PCER1 = PMC_PCER1_PID36;                       // enable PWM controller clock (disabled on power up)
-
-  PWM->PWM_WPCR = WPKEY | WPRG_ALL | WPCMD_DIS_SW;        // enable setting of all PWM registers
-  PWM->PWM_CLK = PWM_CLOCK_F;                             // enable CLK_A and set it to 1MHz, leave CLK_B disabled
-  PWM->PWM_CH_NUM[0].PWM_CMR = 0b1011;                    // set channel 0 to Clock A input & to left aligned
-  if (G2_PWM_X) PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;      // set channel 1 to Clock A input & to left aligned
-  if (G2_PWM_Y) PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;      // set channel 2 to Clock A input & to left aligned
-  if (G2_PWM_Z) PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;      // set channel 3 to Clock A input & to left aligned
-  if (G2_PWM_E) PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;      // set channel 4 to Clock A input & to left aligned
-
-  PWM->PWM_CH_NUM[0].PWM_CPRD = PWM_PERIOD_US;            // set channel 0 Period
-
-  PWM->PWM_IER2 = PWM_IER1_CHID0;                         // generate interrupt when counter0 overflows
-  PWM->PWM_IER2 = PWM_IER2_CMPM0
-    | G2_MASK_X(PWM_IER2_CMPM1)
-    | G2_MASK_Y(PWM_IER2_CMPM2)
-    | G2_MASK_Z(PWM_IER2_CMPM3)
-    | G2_MASK_E(PWM_IER2_CMPM4)
-  ; // generate interrupt on compare event
-
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1])); // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2])); // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
-
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
-
-  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0
-    | G2_MASK_X(PWM_SCM_SYNC1)
-    | G2_MASK_Y(PWM_SCM_SYNC2)
-    | G2_MASK_Z(PWM_SCM_SYNC3)
-    | G2_MASK_E(PWM_SCM_SYNC4)
-  ; // sync 1-4 with 0, use mode 0 for updates
-
-  PWM->PWM_ENA = PWM_ENA_CHID0
-    | G2_MASK_X(PWM_ENA_CHID1)
-    | G2_MASK_Y(PWM_ENA_CHID2)
-    | G2_MASK_Z(PWM_ENA_CHID3)
-    | G2_MASK_E(PWM_ENA_CHID4)
-  ; // enable channels used by G2
-
-  PWM->PWM_IER1 = PWM_IER1_CHID0
-    | G2_MASK_X(PWM_IER1_CHID1)
-    | G2_MASK_Y(PWM_IER1_CHID2)
-    | G2_MASK_Z(PWM_IER1_CHID3)
-    | G2_MASK_E(PWM_IER1_CHID4)
-  ; // enable interrupts for channels used by G2
-
-  NVIC_EnableIRQ(PWM_IRQn);     // Enable interrupt handler
-  NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
-}
-
-void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
-
-  if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
-
-  switch (driver) {
-    case 0:
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_X || G2_PWM_Y) PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      break;
-    case 1:
-      if (G2_PWM_Z) {
-        PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
-        PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
-    default:
-      if (G2_PWM_E) {
-        PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
-        PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
-  }
-}
-
-volatile uint32_t PWM_ISR1_STATUS, PWM_ISR2_STATUS;
-
-void PWM_Handler() {
-  PWM_ISR1_STATUS = PWM->PWM_ISR1;
-  PWM_ISR2_STATUS = PWM->PWM_ISR2;
-  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                                                         // CHAN_0 interrupt
-    if (G2_PWM_X) *ISR_table[0].set_register = ISR_table[0].write_mask;                           // set X to active
-    if (G2_PWM_Y) *ISR_table[1].set_register = ISR_table[1].write_mask;                           // set Y to active
-    if (G2_PWM_Z) *ISR_table[2].set_register = ISR_table[2].write_mask;                           // set Z to active
-    if (G2_PWM_E) *ISR_table[3].set_register = ISR_table[3].write_mask;                           // set E to active
-  }
-  else {
-    if (G2_PWM_X && (PWM_ISR2_STATUS & PWM_IER2_CMPM1)) *ISR_table[0].clr_register = ISR_table[0].write_mask; // set X to inactive
-    if (G2_PWM_Y && (PWM_ISR2_STATUS & PWM_IER2_CMPM2)) *ISR_table[1].clr_register = ISR_table[1].write_mask; // set Y to inactive
-    if (G2_PWM_Z && (PWM_ISR2_STATUS & PWM_IER2_CMPM3)) *ISR_table[2].clr_register = ISR_table[2].write_mask; // set Z to inactive
-    if (G2_PWM_E && (PWM_ISR2_STATUS & PWM_IER2_CMPM4)) *ISR_table[3].clr_register = ISR_table[3].write_mask; // set E to inactive
-  }
-  return;
-}
-
-#endif // PRINTRBOARD_G2
--- a/Marlin/src/HAL/DUE/inc/Conditionals_post.h
+++ b/Marlin/src/HAL/DUE/inc/Conditionals_post.h
@@ -1,28 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#if USE_FALLBACK_EEPROM
-  #undef SRAM_EEPROM_EMULATION
-  #undef SDCARD_EEPROM_EMULATION
-  #define FLASH_EEPROM_EMULATION
-#endif
--- a/Marlin/src/HAL/ESP32/inc/Conditionals_post.h
+++ b/Marlin/src/HAL/ESP32/inc/Conditionals_post.h
@@ -1,27 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-// If no real EEPROM, Flash emulation, or SRAM emulation is available fall back to SD emulation
-#if ENABLED(EEPROM_SETTINGS) && NONE(USE_WIRED_EEPROM, FLASH_EEPROM_EMULATION, SRAM_EEPROM_EMULATION)
-  #define SDCARD_EEPROM_EMULATION
-#endif
--- a/Marlin/src/HAL/HAL.h
+++ b/Marlin/src/HAL/HAL.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/HAL.cpp
+++ b/Marlin/src/HAL/HAL_AVR/HAL.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/HAL.h
+++ b/Marlin/src/HAL/HAL_AVR/HAL.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
@@ -53,8 +53,8 @@
 //#define analogInputToDigitalPin(IO) IO

 #ifndef CRITICAL_SECTION_START
-  #define CRITICAL_SECTION_START()  unsigned char _sreg = SREG; cli()
-  #define CRITICAL_SECTION_END()    SREG = _sreg
+  #define CRITICAL_SECTION_START  unsigned char _sreg = SREG; cli()
+  #define CRITICAL_SECTION_END    SREG = _sreg
 #endif
 #define ISRS_ENABLED() TEST(SREG, SREG_I)
 #define ENABLE_ISRS()  sei()
--- a/Marlin/src/HAL/HAL_AVR/HAL_SPI.cpp
+++ b/Marlin/src/HAL/HAL_AVR/HAL_SPI.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -197,7 +197,7 @@ void spiBegin() {
    // output pin high - like sending 0xFF
    WRITE(MOSI_PIN, HIGH);

-    LOOP_L_N(i, 8) {
+    for (uint8_t i = 0; i < 8; i++) {
      WRITE(SCK_PIN, HIGH);

      nop; // adjust so SCK is nice
@@ -224,7 +224,7 @@ void spiBegin() {
  void spiSend(uint8_t data) {
    // no interrupts during byte send - about 8µs
    cli();
-    LOOP_L_N(i, 8) {
+    for (uint8_t i = 0; i < 8; i++) {
      WRITE(SCK_PIN, LOW);
      WRITE(MOSI_PIN, data & 0x80);
      data <<= 1;
--- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp
+++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -55,7 +55,7 @@
  // A SW memory barrier, to ensure GCC does not overoptimize loops
  #define sw_barrier() asm volatile("": : :"memory");

-  #include "../../feature/e_parser.h"
+  #include "../../feature/emergency_parser.h"

  // "Atomically" read the RX head index value without disabling interrupts:
  // This MUST be called with RX interrupts enabled, and CAN'T be called
@@ -682,7 +682,7 @@

    // Round correctly so that print(1.999, 2) prints as "2.00"
    double rounding = 0.5;
-    LOOP_L_N(i, digits) rounding *= 0.1;
+    for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
    number += rounding;

    // Extract the integer part of the number and print it
--- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.h
+++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -31,9 +31,9 @@
 * Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
 */

-#include <WString.h>
+#include "../shared/MarlinSerial.h"

-#include "../../inc/MarlinConfigPre.h"
+#include <WString.h>

 #ifndef SERIAL_PORT
  #define SERIAL_PORT 0
@@ -261,12 +261,12 @@
    static constexpr int PORT               = serial;
    static constexpr unsigned int RX_SIZE   = RX_BUFFER_SIZE;
    static constexpr unsigned int TX_SIZE   = TX_BUFFER_SIZE;
-    static constexpr bool XONOFF            = ENABLED(SERIAL_XON_XOFF);
-    static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
-    static constexpr bool DROPPED_RX        = ENABLED(SERIAL_STATS_DROPPED_RX);
-    static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
-    static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
-    static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
+    static constexpr bool XONOFF            = bSERIAL_XON_XOFF;
+    static constexpr bool EMERGENCYPARSER   = bEMERGENCY_PARSER;
+    static constexpr bool DROPPED_RX        = bSERIAL_STATS_DROPPED_RX;
+    static constexpr bool RX_OVERRUNS       = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
+    static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
+    static constexpr bool MAX_RX_QUEUED     = bSERIAL_STATS_MAX_RX_QUEUED;
  };
  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;

@@ -304,7 +304,7 @@
    static constexpr bool XONOFF            = false;
    static constexpr bool EMERGENCYPARSER   = false;
    static constexpr bool DROPPED_RX        = false;
-    static constexpr bool RX_OVERRUNS       = HAS_DGUS_LCD && ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    static constexpr bool RX_OVERRUNS       = bDGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS;
    static constexpr bool RX_FRAMING_ERRORS = false;
    static constexpr bool MAX_RX_QUEUED     = false;
  };
--- a/Marlin/src/HAL/HAL_AVR/Servo.cpp
+++ b/Marlin/src/HAL/HAL_AVR/Servo.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/ServoTimers.h
+++ b/Marlin/src/HAL/HAL_AVR/ServoTimers.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h
+++ b/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fast_pwm.cpp
+++ b/Marlin/src/HAL/HAL_AVR/fast_pwm.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -167,7 +167,7 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
    uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 };

    // loop over prescaler values
-    LOOP_S_L_N(i, 1, 8) {
+    for (uint8_t i = 1; i < 8; i++) {
      uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
      if (timer.n == 2) {
        // No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
--- a/Marlin/src/HAL/HAL_AVR/fastio.cpp
+++ b/Marlin/src/HAL/HAL_AVR/fastio.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -98,9 +98,9 @@

 #define SET_INPUT(IO)         _SET_INPUT(IO)
 #define SET_INPUT_PULLUP(IO)  do{ _SET_INPUT(IO); _WRITE(IO, HIGH); }while(0)
-#define SET_INPUT_PULLDOWN    SET_INPUT
 #define SET_OUTPUT(IO)        _SET_OUTPUT(IO)
-#define SET_PWM               SET_OUTPUT
+
+#define SET_PWM(IO)           SET_OUTPUT(IO)

 #define IS_INPUT(IO)          _IS_INPUT(IO)
 #define IS_OUTPUT(IO)         _IS_OUTPUT(IO)
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_1280.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_1280.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -26,7 +26,7 @@
 *
 *   Hardware Pin  : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 | 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100
 *   Port          : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
- *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
+ *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 72 75 76 77 74 xx xx xx xx xx
 */

 #include "../fastio.h"
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_1281.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_1281.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_168.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_168.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_644.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_644.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_AT90USB.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_AT90USB.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/inc/Conditionals_LCD.h
+++ b/Marlin/src/HAL/HAL_AVR/inc/Conditionals_LCD.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/inc/Conditionals_adv.h
+++ b/Marlin/src/HAL/HAL_AVR/inc/Conditionals_adv.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/inc/Conditionals_post.h
+++ b/Marlin/src/HAL/HAL_AVR/inc/Conditionals_post.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/inc/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_AVR/inc/SanityCheck.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -56,10 +56,10 @@
 /**
 * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
 */
-#if HAS_TRINAMIC_CONFIG && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+#if HAS_TRINAMIC && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
  #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif

-#if HAS_TMC_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
+#if TMC_HAS_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
  #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
 #endif
--- a/Marlin/src/HAL/HAL_AVR/math.h
+++ b/Marlin/src/HAL/HAL_AVR/math.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp
+++ b/Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -25,7 +25,7 @@

 #if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)

-#include "../shared/eeprom_api.h"
+#include "../shared/persistent_store_api.h"

 bool PersistentStore::access_start() { return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -39,7 +39,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
    if (v != eeprom_read_byte(p)) {
      eeprom_write_byte(p, v);
      if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
        return true;
      }
    }
--- a/Marlin/src/HAL/HAL_AVR/pinsDebug.h
+++ b/Marlin/src/HAL/HAL_AVR/pinsDebug.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -70,12 +70,12 @@

 void PRINT_ARRAY_NAME(uint8_t x) {
  char *name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name);
-  LOOP_L_N(y, MAX_NAME_LENGTH) {
+  for (uint8_t y = 0; y < MAX_NAME_LENGTH; y++) {
    char temp_char = pgm_read_byte(name_mem_pointer + y);
    if (temp_char != 0)
      SERIAL_CHAR(temp_char);
    else {
-      LOOP_L_N(i, MAX_NAME_LENGTH - y) SERIAL_CHAR(' ');
+      for (uint8_t i = 0; i < MAX_NAME_LENGTH - y; i++) SERIAL_CHAR(' ');
      break;
    }
  }
--- a/Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h
+++ b/Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h
+++ b/Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/HAL/HAL_AVR/spi_pins.h
+++ b/Marlin/src/HAL/HAL_AVR/spi_pins.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp
+++ b/Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -88,7 +88,7 @@ void u8g_spiSend_sw_AVR_mode_0(uint8_t val) {
  volatile uint8_t *outData = u8g_outData,
                   *outClock = u8g_outClock;
  U8G_ATOMIC_START();
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
    if (val & 0x80)
      *outData |= bitData;
    else
@@ -108,7 +108,7 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
  volatile uint8_t *outData = u8g_outData,
                   *outClock = u8g_outClock;
  U8G_ATOMIC_START();
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
    *outClock &= bitNotClock;
    if (val & 0x80)
      *outData |= bitData;
--- a/Marlin/src/HAL/HAL_AVR/watchdog.cpp
+++ b/Marlin/src/HAL/HAL_AVR/watchdog.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -62,7 +62,7 @@ void watchdog_init() {
 #if ENABLED(WATCHDOG_RESET_MANUAL)
  ISR(WDT_vect) {
    sei();  // With the interrupt driven serial we need to allow interrupts.
-    SERIAL_ERROR_MSG(STR_WATCHDOG_FIRED);
+    SERIAL_ERROR_MSG(MSG_WATCHDOG_FIRED);
    minkill();  // interrupt-safe final kill and infinite loop
  }
 #endif
--- a/Marlin/src/HAL/HAL_AVR/watchdog.h
+++ b/Marlin/src/HAL/HAL_AVR/watchdog.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/DebugMonitor.cpp
+++ b/Marlin/src/HAL/HAL_DUE/DebugMonitor.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp
+++ b/Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp
@@ -1,24 +1,3 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */

 /* EEPROM emulation over flash with reduced wear
 *
@@ -54,10 +33,10 @@

 #include "../../inc/MarlinConfig.h"

-#if ENABLED(FLASH_EEPROM_EMULATION)
+#if ENABLED(EEPROM_SETTINGS) && NONE(I2C_EEPROM, SPI_EEPROM)

 #include "../shared/Marduino.h"
-#include "../shared/eeprom_api.h"
+#include "../shared/persistent_store_api.h"

 #define EEPROMSize     4096
 #define PagesPerGroup   128
@@ -1016,5 +995,5 @@ void eeprom_flush() {
  ee_Flush();
 }

-#endif // FLASH_EEPROM_EMULATION
+#endif // EEPROM_SETTINGS && (!I2C_EEPROM && !SPI_EEPROM)
 #endif // ARDUINO_ARCH_AVR
--- a/Marlin/src/HAL/HAL_DUE/HAL.cpp
+++ b/Marlin/src/HAL/HAL_DUE/HAL.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
--- a/Marlin/src/HAL/HAL_DUE/HAL.h
+++ b/Marlin/src/HAL/HAL_DUE/HAL.h
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
 *
@@ -39,7 +39,7 @@
 #include <stdint.h>

 // Define MYSERIAL0/1 before MarlinSerial includes!
-#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
+#if SERIAL_PORT == -1
  #define MYSERIAL0 customizedSerial1
 #elif SERIAL_PORT == 0
  #define MYSERIAL0 Serial
@@ -56,7 +56,7 @@
 #ifdef SERIAL_PORT_2
  #if SERIAL_PORT_2 == SERIAL_PORT
    #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
-  #elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
+  #elif SERIAL_PORT_2 == -1
    #define MYSERIAL1 customizedSerial2
  #elif SERIAL_PORT_2 == 0
    #define MYSERIAL1 Serial
@@ -94,6 +94,7 @@
  #endif
 #endif

+
 #include "MarlinSerial.h"
 #include "MarlinSerialUSB.h"

@@ -118,8 +119,8 @@ typedef int8_t pin_t;
 //
 // Interrupts
 //
-#define CRITICAL_SECTION_START()  uint32_t primask = __get_PRIMASK(); __disable_irq()
-#define CRITICAL_SECTION_END()    if (!primask) __enable_irq()
+#define CRITICAL_SECTION_START  uint32_t primask = __get_PRIMASK(); __disable_irq()
+#define CRITICAL_SECTION_END    if (!primask) __enable_irq()
 #define ISRS_ENABLED() (!__get_PRIMASK())
 #define ENABLE_ISRS()  __enable_irq()
 #define DISABLE_ISRS() __disable_irq()
--- a/Marlin/src/HAL/HAL_DUE/HAL_SPI.cpp
+++ b/Marlin/src/HAL/HAL_DUE/HAL_SPI.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/InterruptVectors.cpp
+++ b/Marlin/src/HAL/HAL_DUE/InterruptVectors.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -63,13 +63,13 @@ static pfnISR_Handler* get_relocated_table_addr() {
  memcpy(&ram_tab, romtab, sizeof(ram_tab));

  // Disable global interrupts
-  CRITICAL_SECTION_START();
+  CRITICAL_SECTION_START;

  // Set the vector table base address to the SRAM copy
  SCB->VTOR = (uint32_t)(&ram_tab);

  // Reenable interrupts
-  CRITICAL_SECTION_END();
+  CRITICAL_SECTION_END;

  // Return the address of the table
  return (pfnISR_Handler*)(&ram_tab);
@@ -80,7 +80,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
  pfnISR_Handler *isrtab = get_relocated_table_addr();

  // Disable global interrupts
-  CRITICAL_SECTION_START();
+  CRITICAL_SECTION_START;

  // Get the original handler
  pfnISR_Handler oldHandler = isrtab[irq + 16];
@@ -89,7 +89,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
  isrtab[irq + 16] = newHandler;

  // Reenable interrupts
-  CRITICAL_SECTION_END();
+  CRITICAL_SECTION_END;

  // Return the original one
  return oldHandler;
--- a/Marlin/src/HAL/HAL_DUE/InterruptVectors.h
+++ b/Marlin/src/HAL/HAL_DUE/InterruptVectors.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/MarlinSerial.cpp
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerial.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -45,7 +45,7 @@ template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSeria
 // A SW memory barrier, to ensure GCC does not overoptimize loops
 #define sw_barrier() asm volatile("": : :"memory");

-#include "../../feature/e_parser.h"
+#include "../../feature/emergency_parser.h"

 // (called with RX interrupts disabled)
 template<typename Cfg>
@@ -606,7 +606,7 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {

  // Round correctly so that print(1.999, 2) prints as "2.00"
  double rounding = 0.5;
-  LOOP_L_N(i, digits) rounding *= 0.1;
+  for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
  number += rounding;

  // Extract the integer part of the number and print it
@@ -629,13 +629,23 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {

 // If not using the USB port as serial port
 #if SERIAL_PORT >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;      // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;   // Instantiate
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
 #endif

-#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;    // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
+#ifdef SERIAL_PORT_2
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
 #endif

 #endif // ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/HAL_DUE/MarlinSerial.h
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerial.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -27,9 +27,9 @@
 * Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti.  All right reserved.
 */

-#include <WString.h>
+#include "../shared/MarlinSerial.h"

-#include "../../inc/MarlinConfigPre.h"
+#include <WString.h>

 #define DEC 10
 #define HEX 16
@@ -163,18 +163,22 @@ struct MarlinSerialCfg {
  static constexpr int PORT               = serial;
  static constexpr unsigned int RX_SIZE   = RX_BUFFER_SIZE;
  static constexpr unsigned int TX_SIZE   = TX_BUFFER_SIZE;
-  static constexpr bool XONOFF            = ENABLED(SERIAL_XON_XOFF);
-  static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
-  static constexpr bool DROPPED_RX        = ENABLED(SERIAL_STATS_DROPPED_RX);
-  static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
-  static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
-  static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
+  static constexpr bool XONOFF            = bSERIAL_XON_XOFF;
+  static constexpr bool EMERGENCYPARSER   = bEMERGENCY_PARSER;
+  static constexpr bool DROPPED_RX        = bSERIAL_STATS_DROPPED_RX;
+  static constexpr bool RX_OVERRUNS       = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
+  static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
+  static constexpr bool MAX_RX_QUEUED     = bSERIAL_STATS_MAX_RX_QUEUED;
 };

 #if SERIAL_PORT >= 0
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
-#endif

-#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
+  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
+#endif // SERIAL_PORT >= 0
+
+#ifdef SERIAL_PORT_2
+
  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
 #endif
--- a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.cpp
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -29,12 +29,12 @@

 #include "../../inc/MarlinConfig.h"

-#if HAS_USB_SERIAL
+#if SERIAL_PORT == -1

 #include "MarlinSerialUSB.h"

 #if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/e_parser.h"
+  #include "../../feature/emergency_parser.h"
 #endif

 // Imports from Atmel USB Stack/CDC implementation
@@ -259,7 +259,7 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {

  // Round correctly so that print(1.999, 2) prints as "2.00"
  double rounding = 0.5;
-  LOOP_L_N(i, digits)
+  for (uint8_t i = 0; i < digits; ++i)
    rounding *= 0.1;

  number += rounding;
@@ -283,12 +283,8 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
 }

 // Preinstantiate
-#if SERIAL_PORT == -1
-  MarlinSerialUSB customizedSerial1;
-#endif
-#if SERIAL_PORT_2 == -1
-  MarlinSerialUSB customizedSerial2;
-#endif
+MarlinSerialUSB customizedSerial1;
+
+#endif // SERIAL_PORT == -1

-#endif // HAS_USB_SERIAL
 #endif // ARDUINO_ARCH_SAM
--- a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.h
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -28,7 +28,7 @@

 #include "../../inc/MarlinConfig.h"

-#if HAS_USB_SERIAL
+#if SERIAL_PORT == -1

 #include <WString.h>

@@ -88,12 +88,6 @@ private:
  static void printFloat(double, uint8_t);
 };

-#if SERIAL_PORT == -1
-  extern MarlinSerialUSB customizedSerial1;
-#endif
+extern MarlinSerialUSB customizedSerial1;

-#if SERIAL_PORT_2 == -1
-  extern MarlinSerialUSB customizedSerial2;
-#endif
-
-#endif // HAS_USB_SERIAL
+#endif // SERIAL_PORT == -1
--- a/Marlin/src/HAL/HAL_DUE/Servo.cpp
+++ b/Marlin/src/HAL/HAL_DUE/Servo.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/ServoTimers.h
+++ b/Marlin/src/HAL/HAL_DUE/ServoTimers.h
--- a/Marlin/src/HAL/HAL_DUE/Tone.cpp
+++ b/Marlin/src/HAL/HAL_DUE/Tone.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -80,7 +80,7 @@ Pio *SCK_pPio, *MOSI_pPio;
 uint32_t SCK_dwMask, MOSI_dwMask;

 void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
    if (val & 0x80)
      MOSI_pPio->PIO_SODR = MOSI_dwMask;
    else
@@ -94,7 +94,7 @@ void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
 }

 void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
    SCK_pPio->PIO_CODR = SCK_dwMask;
    DELAY_NS(50);
    if (val & 0x80)
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/endstop_interrupts.h
+++ b/Marlin/src/HAL/HAL_DUE/endstop_interrupts.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/fastio.h
+++ b/Marlin/src/HAL/HAL_DUE/fastio.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -166,7 +166,7 @@
 // Set pin as output (wrapper) -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)       _SET_OUTPUT(IO)
 // Set pin as PWM
-#define SET_PWM               SET_OUTPUT
+#define SET_PWM(IO)           SET_OUTPUT(IO)

 // Check if pin is an input
 #define IS_INPUT(IO)         ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) == 0)
--- a/Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.cpp
+++ b/Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.cpp
@@ -0,0 +1,145 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * The PWM module is only used to generate interrupts at specified times. It
+ * is NOT used to directly toggle pins. The ISR writes to the pin assigned to
+ * that interrupt.
+ *
+ * All PWMs use the same repetition rate.  The G2 needs about 10KHz min in order to
+ * not have obvious ripple on the Vref signals.
+ *
+ * The data structures are setup to minimize the computation done by the ISR which
+ * minimizes ISR execution time.  Execution times are 0.8 to 1.1 microseconds.
+ *
+ * FIve PWM interrupt sources are used.  Channel 0 sets the base period.  All Vref
+ * signals are set active when this counter overflows and resets to zero.  The compare
+ * values in channels 1-4 are set to give the desired duty cycle for that Vref pin.
+ * When counter 0 matches the compare value then that channel generates an interrupt.
+ * The ISR checks the source of the interrupt and sets the corresponding pin inactive.
+ *
+ * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
+ */
+
+#include "../../../inc/MarlinConfig.h"
+
+#if MB(PRINTRBOARD_G2)
+
+#include "G2_PWM.h"
+
+volatile uint32_t *SODR_A = &PIOA->PIO_SODR,
+                  *SODR_B = &PIOB->PIO_SODR,
+                  *CODR_A = &PIOA->PIO_CODR,
+                  *CODR_B = &PIOB->PIO_CODR;
+
+PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
+
+void Stepper::digipot_init() {
+
+  OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
+  OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
+
+  #define WPKEY          (0x50574D << 8) // “PWM” in ASCII
+  #define WPCMD_DIS_SW   0  // command to disable Write Protect SW
+  #define WPRG_ALL       (PWM_WPCR_WPRG0 | PWM_WPCR_WPRG1 | PWM_WPCR_WPRG2 | PWM_WPCR_WPRG3 | PWM_WPCR_WPRG4 | PWM_WPCR_WPRG5)  // all Write Protect Groups
+
+  #define PWM_CLOCK_F    F_CPU / 1000000UL   // set clock to 1MHz
+
+  PMC->PMC_PCER1 = PMC_PCER1_PID36;                       // enable PWM controller clock (disabled on power up)
+
+  PWM->PWM_WPCR = WPKEY | WPRG_ALL | WPCMD_DIS_SW;        // enable setting of all PWM registers
+  PWM->PWM_CLK = PWM_CLOCK_F;                             // enable CLK_A and set it to 1MHz, leave CLK_B disabled
+  PWM->PWM_CH_NUM[0].PWM_CMR = 0b1011;                    // set channel 0 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;                    // set channel 1 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;                    // set channel 2 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;                    // set channel 3 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;                    // set channel 4 to Clock A input & to left aligned
+
+  PWM->PWM_CH_NUM[0].PWM_CPRD = PWM_PERIOD_US;            // set channel 0 Period
+
+  PWM->PWM_IER2 = PWM_IER1_CHID0;                         // generate interrupt when counter0 overflows
+  PWM->PWM_IER2 = PWM_IER2_CMPM0 | PWM_IER2_CMPM1 | PWM_IER2_CMPM2 | PWM_IER2_CMPM3 | PWM_IER2_CMPM4;        // generate interrupt on compare event
+
+  PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
+  PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
+  PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1]));   // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
+  PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2]));   // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
+
+  PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
+
+  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0 | PWM_SCM_SYNC1 | PWM_SCM_SYNC2 | PWM_SCM_SYNC3 | PWM_SCM_SYNC4; // sync 1-4 with 0, use mode 0 for updates
+
+  PWM->PWM_ENA = PWM_ENA_CHID0 | PWM_ENA_CHID1 | PWM_ENA_CHID2 | PWM_ENA_CHID3 | PWM_ENA_CHID4;         // enable the channels used by G2
+  PWM->PWM_IER1 = PWM_IER1_CHID0 | PWM_IER1_CHID1 | PWM_IER1_CHID2 | PWM_IER1_CHID3 | PWM_IER1_CHID4;        // enable interrupts for the channels used by G2
+
+  NVIC_EnableIRQ(PWM_IRQn);     // Enable interrupt handler
+  NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
+}
+
+void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
+
+  if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
+
+  switch (driver) {
+    case 0: PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
+            PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
+            PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    case 1: PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
+            PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    default:PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
+            PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+  }
+}
+
+volatile uint32_t PWM_ISR1_STATUS, PWM_ISR2_STATUS;
+
+void PWM_Handler() {
+  PWM_ISR1_STATUS = PWM->PWM_ISR1;
+  PWM_ISR2_STATUS = PWM->PWM_ISR2;
+  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                           // CHAN_0 interrupt
+    *ISR_table[0].set_register = ISR_table[0].write_mask;                                          // set X to active
+    *ISR_table[1].set_register = ISR_table[1].write_mask;                                          // set Y to active
+    *ISR_table[2].set_register = ISR_table[2].write_mask;                                          // set Z to active
+    *ISR_table[3].set_register = ISR_table[3].write_mask;                                          // set E to active
+  }
+  else {
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM1)  *ISR_table[0].clr_register = ISR_table[0].write_mask;   // set X to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM2)  *ISR_table[1].clr_register = ISR_table[1].write_mask;   // set Y to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM3)  *ISR_table[2].clr_register = ISR_table[2].write_mask;   // set Z to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM4)  *ISR_table[3].clr_register = ISR_table[3].write_mask;   // set E to inactive
+  }
+  return;
+}
+
+#endif // PRINTRBOARD_G2
--- a/Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.h
+++ b/Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -63,7 +63,7 @@ extern PWM_map ISR_table[NUM_PWMS];
 extern uint32_t motor_current_setting[3];

 #define IR_BIT(p) (WITHIN(p, 0, 3) ? (p) : (p) + 4)
-#define COPY_ACTIVE_TABLE() do{ LOOP_L_N(i, 6) work_table[i] = active_table[i]; }while(0)
+#define COPY_ACTIVE_TABLE() do{ for (uint8_t i = 0; i < 6 ; i++) work_table[i] = active_table[i]; }while(0)

 #define PWM_MR0 19999         // base repetition rate minus one count - 20mS
 #define PWM_PR 24             // prescaler value - prescaler divide by 24 + 1  -  1 MHz output
--- a/Marlin/src/HAL/HAL_DUE/fastio/G2_pins.h
+++ b/Marlin/src/HAL/HAL_DUE/fastio/G2_pins.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/inc/Conditionals_LCD.h
+++ b/Marlin/src/HAL/HAL_DUE/inc/Conditionals_LCD.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/inc/Conditionals_adv.h
+++ b/Marlin/src/HAL/HAL_DUE/inc/Conditionals_adv.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/inc/Conditionals_post.h
+++ b/Marlin/src/HAL/HAL_DUE/inc/Conditionals_post.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/inc/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_DUE/inc/SanityCheck.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -56,6 +56,6 @@
  #error "FAST_PWM_FAN is not yet implemented for this platform."
 #endif

-#if HAS_TMC_SW_SERIAL
+#if TMC_HAS_SW_SERIAL
  #error "TMC220x Software Serial is not supported on this platform."
 #endif
--- a/Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp
+++ b/Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
 * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
@@ -27,9 +27,9 @@
 #if ENABLED(EEPROM_SETTINGS)

 #include "../../inc/MarlinConfig.h"
-#include "../shared/eeprom_api.h"
+#include "../shared/persistent_store_api.h"

-#if !defined(E2END) && ENABLED(FLASH_EEPROM_EMULATION)
+#if !defined(E2END) && NONE(I2C_EEPROM, SPI_EEPROM)
  #define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
 #endif

@@ -38,7 +38,7 @@ extern void eeprom_flush();
 bool PersistentStore::access_start() { return true; }

 bool PersistentStore::access_finish() {
-  #if ENABLED(FLASH_EEPROM_EMULATION)
+  #if NONE(I2C_EEPROM, SPI_EEPROM)
    eeprom_flush();
  #endif
  return true;
@@ -54,7 +54,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
      eeprom_write_byte(p, v);
      delay(2);
      if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
        return true;
      }
    }
--- a/Marlin/src/HAL/HAL_DUE/pinsDebug.h
+++ b/Marlin/src/HAL/HAL_DUE/pinsDebug.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/HAL/HAL_DUE/spi_pins.h
+++ b/Marlin/src/HAL/HAL_DUE/spi_pins.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/timers.cpp
+++ b/Marlin/src/HAL/HAL_DUE/timers.cpp
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
 *
--- a/Marlin/src/HAL/HAL_DUE/timers.h
+++ b/Marlin/src/HAL/HAL_DUE/timers.h
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
--- a/Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h
--- a/Marlin/src/HAL/HAL_DUE/usb/compiler.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/compiler.h
--- a/Marlin/src/HAL/HAL_DUE/usb/conf_access.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/conf_access.h
--- a/Marlin/src/HAL/HAL_DUE/usb/conf_clock.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/conf_clock.h
--- a/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h
--- a/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.c
+++ b/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.c
--- a/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.h
--- a/Marlin/src/HAL/HAL_DUE/usb/genclk.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/genclk.h
--- a/Marlin/src/HAL/HAL_DUE/usb/mrepeat.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/mrepeat.h
--- a/Marlin/src/HAL/HAL_DUE/usb/osc.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/osc.h
--- a/Marlin/src/HAL/HAL_DUE/usb/pll.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/pll.h
--- a/Marlin/src/HAL/HAL_DUE/usb/preprocessor.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/preprocessor.h
--- a/Marlin/src/HAL/HAL_DUE/usb/sbc_protocol.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/sbc_protocol.h
--- a/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.cpp
+++ b/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.cpp
--- a/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.h
--- a/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h
--- a/Marlin/src/HAL/HAL_DUE/usb/stringz.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/stringz.h
--- a/Marlin/src/HAL/HAL_DUE/usb/sysclk.c
+++ b/Marlin/src/HAL/HAL_DUE/usb/sysclk.c
--- a/Marlin/src/HAL/HAL_DUE/usb/sysclk.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/sysclk.h
--- a/Marlin/src/HAL/HAL_DUE/usb/tpaste.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/tpaste.h
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Scott Lahteine	23742dd356	Update .gitignore	2023-12-27 15:25:27 -06:00
Scott Lahteine	d1743348bc	🔖 Marlin 2.0.3.1	2023-07-20 14:16:17 -05:00
Scott Lahteine	c28dfe32f3	🔨 PlatformIO 6 compatibility	2023-07-20 14:16:17 -05:00
Scott Lahteine	8eb6603e2a	Version 2.0.3	2020-01-30 19:08:05 -06:00
Scott Lahteine	caf9e93465	More files from errant merge	2020-01-30 19:08:01 -06:00
Scott Lahteine	d74f46243b	Merge remote-tracking branch 'upstream/bugfix-2.0.x' into version_203	2020-01-30 19:07:46 -06:00
Scott Lahteine	4d8dc093c9	Version 2.0.2	2020-01-29 23:19:24 -06:00
Roxy-3D	11d8c72ac5	Fix a merge error	2020-01-29 23:19:24 -06:00
Scott Lahteine	ec79034004	Remove extraneous G60/G61 lines	2020-01-27 15:41:50 -06:00
Scott Lahteine	ae2a0036eb	Merge remote-tracking branch 'upstream/bugfix-2.0.x' into release_202	2020-01-27 05:32:36 -06:00
Scott Lahteine	ccdeb3f2cd	Updates for GitHub Actions	2020-01-13 16:49:49 -06:00