Version 2.0.3

.editorconfig

@@ -1,19 +0,0 @@
-# editorconfig.org
-root = true
-
-[{*.patch,syntax_test_*}]
-trim_trailing_whitespace = false
-
-[{*.c,*.cpp,*.h}]
-charset = utf-8
-
-[{*.c,*.cpp,*.h,Makefile}]
-trim_trailing_whitespace = true
-insert_final_newline = true
-end_of_line = lf
-indent_style = space
-indent_size = 2
-
-[{*.py,*.conf,*.sublime-project}]
-indent_style = tab
-indent_size = 4

.github/FUNDING.yml

@@ -1,3 +1,3 @@
 github: [thinkyhead]
 patreon: thinkyhead
-custom: ["https://www.thinkyhead.com/donate-to-marlin"]
+custom: ["http://www.thinkyhead.com/donate-to-marlin"]

.github/ISSUE_TEMPLATE/feature_request.md

@@ -2,7 +2,7 @@
 name: Feature request
 about: Request a Feature
 title: "[FR] (feature request title)"
-labels: 'T: Feature Request'
+labels: ''
 assignees: ''
 
 ---

.github/contributing.md

@@ -34,15 +34,16 @@ This project and everyone participating in it is governed by the [Marlin Code of
 
 We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
 
-* [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
+* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
 * [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
 
-If chat is more your speed, you can join the MarlinFirmware Discord server:
+If chat is more your speed, you can join the MarlinFirmware Slack team:
 
-* Use the link https://discord.gg/n5NJ59y to join up as a General User.
+* Join the Marlin Slack Team
-* Even though our Discord is pretty active, it may take a while for community members to respond — please be patient!
+  * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
-* Use the `#general` channel for general questions or discussion about Marlin.
+  * Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient!
-* Other channels exist for certain topics or are limited to Patrons. Check the channel list.
+  * Use the `#general` channel for general questions or discussion about Marlin.
+  * Other channels exist for certain topics. Check the channel list.
 
 ## How Can I Contribute?
 
@@ -92,7 +93,7 @@ Before creating a suggestion, please check [this list](#before-submitting-a-sugg
 
 #### Before Submitting a Feature Request
 
-* **Check the [Marlin website](https://marlinfw.org/)** for tips — you might discover that the feature is already included. Most importantly, check if you're using [the latest version of Marlin](https://github.com/MarlinFirmware/Marlin/releases) and if you can get the desired behavior by changing [Marlin's config settings](https://marlinfw.org/docs/configuration/configuration.html).
+* **Check the [Marlin website](http://marlinfw.org/)** for tips — you might discover that the feature is already included. Most importantly, check if you're using [the latest version of Marlin](https://github.com/MarlinFirmware/Marlin/releases) and if you can get the desired behavior by changing [Marlin's config settings](http://marlinfw.org/docs/configuration/configuration.html).
 * **Perform a [cursory search](https://github.com/MarlinFirmware/Marlin/issues?q=is%3Aissue)** to see if the enhancement has already been suggested. If it has, add a comment to the existing issue instead of opening a new one.
 
 #### How Do I Submit A (Good) Feature Request?
@@ -116,12 +117,12 @@ Unsure where to begin contributing to Marlin? You can start by looking through t
 
 ### Pull Requests
 
-Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x` and/or `bugfix-2.0.x`) and never to release branches (e.g., `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](https://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
+Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x` and/or `bugfix-2.0.x`) and never to release branches (e.g., `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](http://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
 
 * Fill in [the required template](pull_request_template.md).
 * Don't include issue numbers in the PR title.
 * Include pictures, diagrams, and links to videos in your Pull Request to demonstrate your changes, if needed.
-* Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) posted on our website.
+* Follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website.
 * Document new code with clear and concise comments.
 * End all files with a newline.
 
@@ -136,7 +137,7 @@ Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x
 
 ### C++ Coding Standards
 
-* Please read and follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) posted on our website. Failure to follow these guidelines will delay evaluation and acceptance of Pull Requests.
+* Please read and follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website. Failure to follow these guidelines will delay evaluation and acceptance of Pull Requests.
 
 ### Documentation
 

.github/issue_template.md

@@ -1,11 +1,31 @@
-# NO SUPPORT REQUESTS PLEASE
+<!--
 
-Do you want to ask a question? Are you looking for support? Please don't post here. Support Requests posted here will be automatically closed!
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
 
-Instead use one of the following options:
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
 
-- The Marlin Firmware forum at https://reprap.org/forum/list.php?415
+Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
-- The MarlinFirmware Facebook Group at https://www.facebook.com/groups/1049718498464482/
-- The MarlinFirmware Discord Server at https://discord.gg/n5NJ59y.
 
-Before filing an issue be sure to test the latest "bugfix" branch to see whether the issue is already addressed.
+-->
+
+### Description
+
+<!-- Description of the bug or requested feature -->
+
+### Steps to Reproduce
+
+<!-- If this is a Bug Report, please describe the steps needed to reproduce the issue -->
+
+1. [First Step]
+2. [Second Step]
+3. [and so on...]
+
+**Expected behavior:** [What you expect to happen]
+
+**Actual behavior:** [What actually happens]
+
+#### Additional Information
+
+* Include a ZIP file containing your `Configuration.h` and `Configuration_adv.h` files.
+* Provide pictures or links to videos that clearly demonstrate the issue.
+* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.

.github/labeler.yml

@@ -0,0 +1,18 @@
+# Add '@domain/core' label to any change within the 'core' package
+enhancement:
+  - .github
+
+# Add 'test' label to any change to *.spec.js files within the source dir
+"C: Motion":
+  - src/module/motion.*
+  - src/module/planner.*
+  - src/module/stepper.*
+
+"C: G-code Parser":
+  - src/gcode/**
+
+"PR: Configurations":
+  - config/examples/**
+
+"T: 32-Bit & HAL":
+  - src/HAL/**

.github/lock.yml

@@ -1,40 +0,0 @@
-#
-# Configuration for Lock Threads - https://github.com/dessant/lock-threads-app
-#
-
-# Number of days of inactivity before a closed issue or pull request is locked
-daysUntilLock: 60
-
-# Skip issues and pull requests created before a given timestamp. Timestamp must
-# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
-skipCreatedBefore: false
-
-# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
-exemptLabels: [ 'no-locking' ]
-
-# Label to add before locking, such as `outdated`. Set to `false` to disable
-lockLabel: false
-
-# Comment to post before locking. Set to `false` to disable
-lockComment: >
-  This thread has been automatically locked since there has not been
-  any recent activity after it was closed. Please open a new issue for
-  related bugs.
-
-# Assign `resolved` as the reason for locking. Set to `false` to disable
-setLockReason: true
-
-# Limit to only `issues` or `pulls`
-# only: issues
-
-# Optionally, specify configuration settings just for `issues` or `pulls`
-# issues:
-#   exemptLabels:
-#     - help-wanted
-#   lockLabel: outdated
-
-# pulls:
-#   daysUntilLock: 30
-
-# Repository to extend settings from
-# _extends: repo

.github/pull_request_template.md

@@ -14,10 +14,6 @@ We must be able to understand your proposed change from this description. If we
 
 <!-- What does this fix or improve? -->
 
-### Configurations
-
-<!-- Attach any Configuration.h, Configuration_adv.h, or platformio.ini files needed to compile/test your Pull Request. -->
-
 ### Related Issues
 
 <!-- Whether this fixes a bug or fulfills a feature request, please list any related Issues here. -->

.github/workflows/bump-date.yml

@@ -11,8 +11,6 @@ on:
 
 jobs:
   bump_date:
-    name: Bump Distribution Date
-    if: github.repository == 'MarlinFirmware/Marlin'
 
     runs-on: ubuntu-latest
 
@@ -26,6 +24,7 @@ jobs:
     - name: Bump Distribution Date
       run: |
         # Inline Bump Script
+        [[ "$GITHUB_REPOSITORY" == "MarlinFirmware/Marlin" ]] || exit 0
         DIST=$( date +"%Y-%m-%d" )
         eval "sed -E -i 's/(#define +STRING_DISTRIBUTION_DATE) .*$/\1 \"$DIST\"/g' Marlin/src/inc/Version.h" && \
         git config user.name "${GITHUB_ACTOR}" && \

.github/workflows/check-pr.yml

@@ -1,9 +1,9 @@
 #
 # check-pr.yml
-# Close PRs directed at release branches
+# Add a comment to the PR if it's directed to a release branch
 #
 
-name: PR Bad Target
+name: Check PR
 
 on:
   pull_request:
@@ -13,21 +13,19 @@ on:
     - 2.0.x
 
 jobs:
-  bad_target:
+  check_pr:
-    name: PR Bad Target
-    if: github.repository == 'MarlinFirmware/Marlin'
 
     runs-on: ubuntu-latest
 
     steps:
-    - uses: peter-evans/close-pull@v1
+    - name: Comment on PR
+      uses: unsplash/comment-on-pr@master
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
       with:
-        delete-branch: false
+        msg: "<p>Thanks for your contribution! \
-        comment: >
+              Unfortunately we can't accept PRs directed at release branches. \
-          Thanks for your contribution! Unfortunately we can't accept PRs directed at release branches. We make patches to the bugfix branches and only later do we push them out as releases.
+              We make patches to the bugfix branches and only later do we push them out as releases. \
-
+              Please redo this PR starting with the `bugfix-2.0.x` branch and be careful to target `bugfix-2.0.x` when resubmitting the PR.</p> \
-          Please redo this PR starting with the `bugfix-2.0.x` branch and be careful to target `bugfix-2.0.x` when resubmitting the PR.
+              <p>It may help to set your fork's default branch to `bugfix-2.0.x`.</p> \
-
+              <p>See <a href='http://marlinfw.org/docs/development/getting_started_pull_requests.html' target='_blank'>this page</a> for full instructions.</p>"
-          It may help to set your fork's default branch to `bugfix-2.0.x`.
-
-          See [this page](http://marlinfw.org/docs/development/getting_started_pull_requests.html) for full instructions.

.github/workflows/close-stale.yml

@@ -1,27 +0,0 @@
-#
-# close-stale.yml
-# Close open issues after a period of inactivity
-#
-
-name: Close Stale Issues
-
-on:
-  schedule:
-  - cron: "22 1 * * *"
-
-jobs:
-  stale:
-    name: Close Stale Issues
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: actions/stale@v3
-      with:
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-        stale-issue-message: 'This issue has had no activity in the last 30 days. Please add a reply if you want to keep this issue active, otherwise it will be automatically closed within 7 days.'
-        days-before-stale: 30
-        days-before-close: 7
-        stale-issue-label: 'stale-closing-soon'
-        exempt-issue-labels: 'T: Feature Request'

.github/workflows/label-pr.yml

@@ -0,0 +1,23 @@
+#
+# label-pr.yml
+# Automatically close the PR if it's directed to a release branch
+#
+
+name: Apply Labels
+
+on:
+  pull_request:
+    branches:
+    - bugfix-1.1.x
+    - bugfix-2.0.x
+    - dev-2.1.x
+
+jobs:
+  apply_labels:
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/labeler@v2
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/lock-closed.yml

@@ -1,32 +0,0 @@
-#
-# lock-closed.yml
-# Lock closed issues after a period of inactivity
-#
-
-name: Lock Closed Issues
-
-on:
-  schedule:
-    - cron: '0 1/13 * * *'
-
-jobs:
-  lock:
-    name: Lock Closed Issues
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: dessant/lock-threads@v2
-      with:
-        github-token: ${{ github.token }}
-        process-only: 'issues'
-        issue-lock-inactive-days: '60'
-        issue-exclude-created-before: ''
-        issue-exclude-labels: 'no-locking'
-        issue-lock-labels: ''
-        issue-lock-comment: >
-          This issue has been automatically locked since there
-          has not been any recent activity after it was closed.
-          Please open a new issue for related bugs.
-        issue-lock-reason: ''

.github/workflows/test-builds.yml

@@ -9,14 +9,7 @@ on:
   pull_request:
     branches:
     - bugfix-2.0.x
-    paths-ignore:
+    - dev-2.1.x
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-  push:
-    branches:
-    - bugfix-2.0.x
     paths-ignore:
     - config/**
     - data/**
@@ -25,8 +18,6 @@ on:
 
 jobs:
   test_builds:
-    name: Run All Tests
-    if: github.repository == 'MarlinFirmware/Marlin'
 
     runs-on: ubuntu-latest
 
@@ -38,49 +29,32 @@ jobs:
         - DUE
         - esp32
         - linux_native
-        - mega2560
+        - megaatmega2560
         - teensy31
         - teensy35
-        - teensy41
-        - SAMD51_grandcentral_m4
 
         # Extended AVR Environments
 
         - FYSETC_F6_13
-        - mega1280
+        - megaatmega1280
         - rambo
-        - sanguino1284p
+        - sanguino_atmega1284p
-        - sanguino644p
+        - sanguino_atmega644p
 
         # Extended STM32 Environments
 
-        - STM32F103RC_btt
+        - STM32F103RC_bigtree
-        - STM32F103RC_btt_USB
+        - STM32F103RC_bigtree_USB
-        - STM32F103RE_btt
+        - STM32F103RE_bigtree
-        - STM32F103RE_btt_USB
+        - STM32F103RE_bigtree_USB
         - STM32F103RC_fysetc
-        - STM32F103RC_meeb
         - jgaurora_a5s_a1
         - STM32F103VE_longer
         - STM32F407VE_black
-        - STM32F401VE_STEVAL
-        - BIGTREE_BTT002
         - BIGTREE_SKR_PRO
-        - BIGTREE_GTR_V1_0
         - mks_robin
-        - mks_robin_stm32
         - ARMED
         - FYSETC_S6
-        - STM32F070CB_malyan
-        - STM32F070RB_malyan
-        - malyan_M300
-        - mks_robin_lite
-        - FLYF407ZG
-        - rumba32
-        - mks_robin_pro
-        - STM32F103RET6_creality
-        - LERDGEX
-        - mks_robin_nano35
 
         # Put lengthy tests last
 
@@ -93,10 +67,15 @@ jobs:
         #- STM32F7
 
         # Non-working environment tests
+
+        #- BIGTREE_BTT002
         #- at90usb1286_cdc
         #- at90usb1286_dfu
         #- STM32F103CB_malyan
+        #- mks_robin_lite
         #- mks_robin_mini
+        #- mks_robin_nano
+        #- SAMD51_grandcentral_m4
 
     steps:
 
@@ -108,7 +87,7 @@ jobs:
 
     - name: Install PlatformIO
       run: |
-        pip install -U https://github.com/platformio/platformio-core/archive/develop.zip
+        pip install -U https://github.com/platformio/platformio-core/archive/master.zip
         platformio update
 
     - name: Check out the PR
@@ -117,7 +96,8 @@ jobs:
     - name: Run ${{ matrix.test-platform }} Tests
       run: |
         # Inline tests script
+        [[ "$GITHUB_REPOSITORY" == "MarlinFirmware/Marlin" ]] || exit 0
         chmod +x buildroot/bin/*
-        chmod +x buildroot/tests/*
+        chmod +x buildroot/share/tests/*
-        export PATH=./buildroot/bin/:./buildroot/tests/:${PATH}
+        export PATH=./buildroot/bin/:./buildroot/share/tests/:${PATH}
         run_tests . ${{ matrix.test-platform }}

.github/workflows/unlock-reopened.yml

@@ -1,22 +0,0 @@
-#
-# unlock-reopened.yml
-# Unlock an issue whenever it is re-opened
-#
-
-name: "Unlock reopened issue"
-
-on:
-  issues:
-    types: [reopened]
-
-jobs:
-  unlock:
-    name: Unlock Reopened
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: OSDKDev/unlock-issues@v1.1
-      with:
-        repo-token: "${{ secrets.GITHUB_TOKEN }}"

.gitignore

@@ -1,6 +1,6 @@
 #
 # Marlin 3D Printer Firmware
-# Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+# Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 #
 # Based on Sprinter and grbl.
 # Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,26 +16,37 @@
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 
-# Generated files
+# Our automatic versioning scheme generates the following file
+# NEVER put it in the repository
 _Version.h
-bdf2u8g.exe
-genpages.exe
-marlin_config.json
-mczip.h
-language*.csv
-out-csv/
-out-language/
-*.gen
-*.sublime-workspace
 
+#
 # OS
+#
 applet/
-.DS_Store
+*.DS_Store
 
-# Compiled C++ Object files
+#
+# Misc
+#
+*~
+*.orig
+*.rej
+*.bak
+*.idea
+*.s
+*.i
+*.ii
+*.swp
+tags
+
+#
+# C++
+#
+# Compiled Object files
 *.slo
 *.lo
 *.o
@@ -66,7 +77,11 @@ applet/
 *.out
 *.app
 
-# Compiled C Object files
+
+#
+# C
+#
+# Object files
 *.o
 *.ko
 *.obj
@@ -108,10 +123,30 @@ applet/
 .gcc-flags.json
 /lib/
 
-# Secure Credentials
+# Workaround for Deviot+platformio quirks
-Configuration_Secure.h
+Marlin/lib
+Marlin/platformio.ini
+Marlin/*/platformio.ini
+Marlin/*/*/platformio.ini
+Marlin/*/*/*/platformio.ini
+Marlin/*/*/*/*/platformio.ini
+Marlin/.travis.yml
+Marlin/*/.travis.yml
+Marlin/*/*/.travis.yml
+Marlin/*/*/*/.travis.yml
+Marlin/*/*/*/*/.travis.yml
+Marlin/.gitignore
+Marlin/*/.gitignore
+Marlin/*/*/.gitignore
+Marlin/*/*/*/.gitignore
+Marlin/*/*/*/*/.gitignore
+Marlin/readme.txt
+Marlin/*/readme.txt
+Marlin/*/*/readme.txt
+Marlin/*/*/*/readme.txt
+Marlin/*/*/*/*/readme.txt
 
-# Visual Studio
+#Visual Studio
 *.sln
 *.vcxproj
 *.vcxproj.user
@@ -122,49 +157,27 @@ __vm/
 .vs/
 vc-fileutils.settings
 
-# Visual Studio Code
+#Visual Studio Code
-.vscode/*
+.vscode
-!.vscode/extensions.json
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/*.db
 
-# Simulation files
+#cmake
-imgui.ini
-eeprom.dat
-spi_flash.bin
-fs.img
-
-# CMake
-buildroot/share/cmake/*
 CMakeLists.txt
-!buildroot/share/cmake/CMakeLists.txt
 src/CMakeLists.txt
 CMakeListsPrivate.txt
-build/
 
-# CLion
+#CLion
 cmake-build-*
 
-# Eclipse
+#Eclipse
 .project
 .cproject
 .pydevproject
 .settings
 .classpath
 
-# Python
+#Python
 __pycache__
-
-# IOLogger logs
-*_log.csv
-
-# Misc.
-*~
-*.orig
-*.rej
-*.bak
-*.idea
-*.i
-*.ii
-*.swp
-tags
-*.logs
-*.bak

.vscode/extensions.json

@@ -1,10 +0,0 @@
-{
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
-    "recommendations": [
-        "platformio.platformio-ide"
-    ],
-    "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
-    ]
-}

LICENSE

@@ -3,7 +3,7 @@
                     GNU GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (c) 2007 Free Software Foundation, Inc. <https://www.fsf.org/>
+ Copyright (c) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -647,7 +647,7 @@ the "copyright" line and a pointer to where the full notice is found.
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
@@ -666,11 +666,12 @@ might be different; for a GUI interface, you would use an "about box".
   You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
 For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
+<http://www.gnu.org/licenses/>.
 
   The GNU General Public License does not permit incorporating your program
 into proprietary programs.  If your program is a subroutine library, you
 may consider it more useful to permit linking proprietary applications with
 the library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
+

Marlin/Makefile

@@ -14,7 +14,7 @@
 # Detailed instructions for using the makefile:
 #
 #  1. Modify the line containing "ARDUINO_INSTALL_DIR" to point to the directory that
-#     contains the Arduino installation (for example, under macOS, this
+#     contains the Arduino installation (for example, under Mac OS X, this
 #     might be /Applications/Arduino.app/Contents/Resources/Java).
 #
 #  2. Modify the line containing "UPLOAD_PORT" to refer to the filename
@@ -22,10 +22,8 @@
 #     (e.g. UPLOAD_PORT = /dev/tty.USB0).  If the exact name of this file
 #     changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
 #
-#  3. Set the line containing "MCU" to match your board's processor. Set
+#  3. Set the line containing "MCU" to match your board's processor.
-#     "PROG_MCU" as the AVR part name corresponding to "MCU". You can use the
+#     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
-#     following command to get a list of correspondences: `avrdude -c alf -p x`
-#     Older boards are atmega8 based, newer ones like Arduino Mini, Bluetooth
 #     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
 #     change F_CPU to 8000000. If you are using Gen7 electronics, you
 #     probably need to use 20000000. Either way, you must regenerate
@@ -36,18 +34,18 @@
 #  5. Type "make upload", reset your Arduino board, and press enter to
 #     upload your program to the Arduino board.
 #
-# Note that all settings at the top of this file can be overridden from
+# Note that all settings at the top of this file can be overriden from
 # the command line with, for example, "make HARDWARE_MOTHERBOARD=71"
 #
 # To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino
+#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino
 #
 # To compile and upload simply add "upload" to the end of the line...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino upload
+#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
 #
 # If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
 # start upload manually (using stk500) like so:
@@ -59,26 +57,7 @@
 #
 
 # This defines the board to compile for (see boards.h for your board's ID)
-HARDWARE_MOTHERBOARD ?= 1020
+HARDWARE_MOTHERBOARD ?= 11
-
-ifeq ($(OS),Windows_NT)
-  # Windows
-  ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
-  ARDUINO_USER_DIR ?= ${HOME}/Arduino
-else
-  UNAME_S := $(shell uname -s)
-  ifeq ($(UNAME_S),Linux)
-    # Linux
-    ARDUINO_INSTALL_DIR ?= /usr/share/arduino
-    ARDUINO_USER_DIR ?= ${HOME}/Arduino
-  endif
-  ifeq ($(UNAME_S),Darwin)
-    # Darwin (macOS)
-    ARDUINO_INSTALL_DIR ?= /Applications/Arduino.app/Contents/Java
-    ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
-    AVR_TOOLS_PATH ?= /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/
-  endif
-endif
 
 # Arduino source install directory, and version number
 # On most linuxes this will be /usr/share/arduino
@@ -88,44 +67,38 @@ ARDUINO_VERSION      ?= 106
 # The installed Libraries are in the User folder
 ARDUINO_USER_DIR ?= ${HOME}/Arduino
 
-# You can optionally set a path to the avr-gcc tools.
+# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
-# Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
 AVR_TOOLS_PATH ?=
 
-# Programmer configuration
+#Programmer configuration
 UPLOAD_RATE        ?= 57600
 AVRDUDE_PROGRAMMER ?= arduino
-# On most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
+# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
 UPLOAD_PORT        ?= /dev/ttyUSB0
 
-# Directory used to build files in, contains all the build files, from object
+#Directory used to build files in, contains all the build files, from object files to the final hex file
-# files to the final hex file on linux it is best to put an absolute path
+#on linux it is best to put an absolute path like /home/username/tmp .
-# like /home/username/tmp .
 BUILD_DIR          ?= applet
 
 # This defines whether Liquid_TWI2 support will be built
 LIQUID_TWI2        ?= 0
 
-# This defines if Wire is needed
+# this defines if Wire is needed
 WIRE               ?= 0
 
-# This defines if Tone is needed (i.e SPEAKER is defined in Configuration.h)
+# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
-# Disabling this (and SPEAKER) saves approximatively 350 bytes of memory.
+U8GLIB             ?= 1
-TONE               ?= 1
 
-# This defines if U8GLIB is needed (may require RELOC_WORKAROUND)
+# this defines whether to include the Trinamic TMCStepper library
-U8GLIB             ?= 0
+TMC                ?= 1
 
-# This defines whether to include the Trinamic TMCStepper library
+# this defines whether to include the AdaFruit NeoPixel library
-TMC                ?= 0
-
-# This defines whether to include the AdaFruit NeoPixel library
 NEOPIXEL           ?= 0
 
 ############
 # Try to automatically determine whether RELOC_WORKAROUND is needed based
 # on GCC versions:
-#   https://www.avrfreaks.net/comment/1789106#comment-1789106
+#   http://www.avrfreaks.net/comment/1789106#comment-1789106
 
 CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d\ )
 CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d\ )
@@ -197,115 +170,98 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100)
 else ifeq ($(HARDWARE_MOTHERBOARD),1101)
 # Velleman K8400 Controller (derived from 3Drag Controller)
 else ifeq ($(HARDWARE_MOTHERBOARD),1102)
-# Velleman K8600 Controller (Vertex Nano)
-else ifeq ($(HARDWARE_MOTHERBOARD),1103)
-# Velleman K8800 Controller (Vertex Delta)
-else ifeq ($(HARDWARE_MOTHERBOARD),1104)
 # 2PrintBeta BAM&DICE with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1105)
+else ifeq ($(HARDWARE_MOTHERBOARD),1103)
 # 2PrintBeta BAM&DICE Due with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1106)
+else ifeq ($(HARDWARE_MOTHERBOARD),1104)
 # MKS BASE v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1107)
+else ifeq ($(HARDWARE_MOTHERBOARD),1105)
 # MKS v1.4 with A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1108)
+else ifeq ($(HARDWARE_MOTHERBOARD),1106)
 # MKS v1.5 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1109)
+else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS v1.6 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1110)
 # MKS BASE 1.0 with Heroic HR4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1111)
+else ifeq ($(HARDWARE_MOTHERBOARD),1108)
 # MKS GEN v1.3 or 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1112)
+else ifeq ($(HARDWARE_MOTHERBOARD),1109)
 # MKS GEN L
-else ifeq ($(HARDWARE_MOTHERBOARD),1113)
+else ifeq ($(HARDWARE_MOTHERBOARD),1110)
 # zrib V2.0 control board (Chinese knock off RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1114)
+else ifeq ($(HARDWARE_MOTHERBOARD),1111)
 # BigTreeTech or BIQU KFB2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1115)
+else ifeq ($(HARDWARE_MOTHERBOARD),1112)
 # Felix 2.0+ Electronics Board (RAMPS like)
-else ifeq ($(HARDWARE_MOTHERBOARD),1116)
+else ifeq ($(HARDWARE_MOTHERBOARD),1113)
 # Invent-A-Part RigidBoard
-else ifeq ($(HARDWARE_MOTHERBOARD),1117)
+else ifeq ($(HARDWARE_MOTHERBOARD),1114)
 # Invent-A-Part RigidBoard V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+else ifeq ($(HARDWARE_MOTHERBOARD),1115)
 # Sainsmart 2-in-1 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
+else ifeq ($(HARDWARE_MOTHERBOARD),1116)
 # Ultimaker
-else ifeq ($(HARDWARE_MOTHERBOARD),1120)
+else ifeq ($(HARDWARE_MOTHERBOARD),1117)
 # Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
+else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-  MCU              ?= atmega1280
+  MCU ?= atmega1280
-  PROG_MCU         ?= m1280
 
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+else ifeq ($(HARDWARE_MOTHERBOARD),1119)
 # Azteeg X3 Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
+else ifeq ($(HARDWARE_MOTHERBOARD),1120)
 # Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-else ifeq ($(HARDWARE_MOTHERBOARD),1124)
+else ifeq ($(HARDWARE_MOTHERBOARD),1121)
 # Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1125)
+else ifeq ($(HARDWARE_MOTHERBOARD),1122)
 # Raise3D Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1126)
+else ifeq ($(HARDWARE_MOTHERBOARD),1123)
 # Rapide Lite RL200 Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1127)
+else ifeq ($(HARDWARE_MOTHERBOARD),1124)
 # Formbot T-Rex 2 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1128)
+else ifeq ($(HARDWARE_MOTHERBOARD),1125)
 # Formbot T-Rex 3
-else ifeq ($(HARDWARE_MOTHERBOARD),1129)
+else ifeq ($(HARDWARE_MOTHERBOARD),1126)
 # Formbot Raptor
-else ifeq ($(HARDWARE_MOTHERBOARD),1130)
+else ifeq ($(HARDWARE_MOTHERBOARD),1127)
 # Formbot Raptor 2
-else ifeq ($(HARDWARE_MOTHERBOARD),1131)
+else ifeq ($(HARDWARE_MOTHERBOARD),1128)
 # bq ZUM Mega 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1132)
+else ifeq ($(HARDWARE_MOTHERBOARD),1129)
 # MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-else ifeq ($(HARDWARE_MOTHERBOARD),1133)
+else ifeq ($(HARDWARE_MOTHERBOARD),1130)
 # TriGorilla Anycubic version 1.3 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1134)
+else ifeq ($(HARDWARE_MOTHERBOARD),1131)
 # TriGorilla Anycubic version 1.4 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1135)
+else ifeq ($(HARDWARE_MOTHERBOARD),1132)
 # TriGorilla Anycubic version 1.4 Rev 1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1136)
+else ifeq ($(HARDWARE_MOTHERBOARD),1133)
 # Creality: Ender-4, CR-8
-else ifeq ($(HARDWARE_MOTHERBOARD),1137)
+else ifeq ($(HARDWARE_MOTHERBOARD),1134)
 # Creality: CR10S, CR20, CR-X
-else ifeq ($(HARDWARE_MOTHERBOARD),1138)
+else ifeq ($(HARDWARE_MOTHERBOARD),1135)
 # Dagoma F5
-else ifeq ($(HARDWARE_MOTHERBOARD),1139)
+else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-# FYSETC F6 1.3
+# FYSETC F6
-else ifeq ($(HARDWARE_MOTHERBOARD),1140)
+else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# FYSETC F6 1.5
-else ifeq ($(HARDWARE_MOTHERBOARD),1141)
 # Duplicator i3 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1142)
+else ifeq ($(HARDWARE_MOTHERBOARD),1138)
 # VORON
-else ifeq ($(HARDWARE_MOTHERBOARD),1143)
+else ifeq ($(HARDWARE_MOTHERBOARD),1139)
 # TRONXY V3 1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1144)
+else ifeq ($(HARDWARE_MOTHERBOARD),1140)
 # Z-Bolt X Series
-else ifeq ($(HARDWARE_MOTHERBOARD),1145)
+else ifeq ($(HARDWARE_MOTHERBOARD),1141)
 # TT OSCAR
-else ifeq ($(HARDWARE_MOTHERBOARD),1146)
+else ifeq ($(HARDWARE_MOTHERBOARD),1142)
 # Overlord/Overlord Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1147)
+else ifeq ($(HARDWARE_MOTHERBOARD),1143)
 # ADIMLab Gantry v1
-else ifeq ($(HARDWARE_MOTHERBOARD),1148)
+else ifeq ($(HARDWARE_MOTHERBOARD),1144)
 # ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1149)
+else ifeq ($(HARDWARE_MOTHERBOARD),1145)
 # BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
+else ifeq ($(HARDWARE_MOTHERBOARD),1146)
 # MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1151)
+else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# MKS GEN L V2.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1153)
-# Ortur 4
-else ifeq ($(HARDWARE_MOTHERBOARD),1154)
-# Tenlog D3 Hero
-else ifeq ($(HARDWARE_MOTHERBOARD),1155)
 
 #
 # RAMBo and derivatives
@@ -378,11 +334,9 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1320)
 # Minitronics v1.0/1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1400)
   MCU              ?= atmega1281
-  PROG_MCU         ?= m1281
 # Silvergate v1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1401)
   MCU              ?= atmega1281
-  PROG_MCU         ?= m1281
 
 #
 # Sanguinololu and Derivatives - ATmega644P, ATmega1284P
@@ -392,57 +346,42 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1401)
 else ifeq ($(HARDWARE_MOTHERBOARD),1500)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Sanguinololu 1.2 and above
 else ifeq ($(HARDWARE_MOTHERBOARD),1501)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Melzi
 else ifeq ($(HARDWARE_MOTHERBOARD),1502)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
+# Melzi with ATmega1284 (MaKr3d version)
-# Melzi V2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1503)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
+# Melzi Creality3D board (for CR-10 etc)
-# Melzi with ATmega1284 (MaKr3d version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1504)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
+# Melzi Malyan M150 board
-# Melzi Creality3D board (for CR-10 etc)
 else ifeq ($(HARDWARE_MOTHERBOARD),1505)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
+# Tronxy X5S
-# Melzi Malyan M150 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1506)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
+# STB V1.1
-# Tronxy X5S
 else ifeq ($(HARDWARE_MOTHERBOARD),1507)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
+# Azteeg X1
-# STB V1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1508)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
+# Anet 1.0 (Melzi clone)
-# Azteeg X1
 else ifeq ($(HARDWARE_MOTHERBOARD),1509)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-# Anet 1.0 (Melzi clone)
-else ifeq ($(HARDWARE_MOTHERBOARD),1510)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 
 #
 # Other ATmega644P, ATmega644, ATmega1284P
@@ -452,61 +391,50 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1510)
 else ifeq ($(HARDWARE_MOTHERBOARD),1600)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen3+
 else ifeq ($(HARDWARE_MOTHERBOARD),1601)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen6
 else ifeq ($(HARDWARE_MOTHERBOARD),1602)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen6 deluxe
 else ifeq ($(HARDWARE_MOTHERBOARD),1603)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen7 custom (Alfons3 Version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1604)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644
-  PROG_MCU         ?= m644
   F_CPU            ?= 20000000
 # Gen7 v1.1, v1.2
 else ifeq ($(HARDWARE_MOTHERBOARD),1605)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
   F_CPU            ?= 20000000
 # Gen7 v1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1606)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
   F_CPU            ?= 20000000
 # Gen7 v1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1607)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
   F_CPU            ?= 20000000
 # Alpha OMCA board
 else ifeq ($(HARDWARE_MOTHERBOARD),1608)
   HARDWARE_VARIANT ?= SanguinoA
   MCU              ?= atmega644
-  PROG_MCU         ?= m644
 # Final OMCA board
 else ifeq ($(HARDWARE_MOTHERBOARD),1609)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Sethi 3D_1
 else ifeq ($(HARDWARE_MOTHERBOARD),1610)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 
 #
 # Teensyduino - AT90USB1286, AT90USB1286P
@@ -516,60 +444,51 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1610)
 else ifeq ($(HARDWARE_MOTHERBOARD),1700)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Printrboard (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1701)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Printrboard Revision F (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1702)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Brainwave (AT90USB646)
 else ifeq ($(HARDWARE_MOTHERBOARD),1703)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb646
-  PROG_MCU         ?= usb646
 # Brainwave Pro (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1704)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # SAV Mk-I (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1705)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Teensy++2.0 (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1706)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # 5DPrint D8 Driver Board
 else ifeq ($(HARDWARE_MOTHERBOARD),1707)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 
 # UltiMachine Archim1 (with DRV8825 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3023)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
-  F_CPU             = 84000000
+  F_CPU             = 84000000L
   IS_MCU            = 0
 # UltiMachine Archim2 (with TMC2130 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3024)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
-  F_CPU             = 84000000
+  F_CPU             = 84000000L
   IS_MCU            = 0
 endif
 
 # Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
 # if you are setting this to something other than 16MHz
-# Do not put the UL suffix, it's done later on.
 # Set to 16Mhz if not yet set.
 F_CPU ?= 16000000
 
@@ -579,8 +498,7 @@ IS_MCU ?= 1
 ifeq ($(IS_MCU),1)
   # Set to arduino, ATmega2560 if not yet set.
   HARDWARE_VARIANT ?= arduino
-  MCU              ?= atmega2560
+  MCU ?= atmega2560
-  PROG_MCU         ?= m2560
 
   TOOL_PREFIX = avr
   MCU_FLAGS   = -mmcu=$(MCU)
@@ -611,36 +529,27 @@ VPATH += $(BUILD_DIR)
 VPATH += $(HARDWARE_SRC)
 
 ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino))
-  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/LiquidCrystal/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/SPI
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
 endif
 
 ifeq ($(IS_MCU),1)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
 
-  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
 endif
 
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
-
 ifeq ($(LIQUID_TWI2), 1)
-  WIRE   = 1
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
-  VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
 endif
 ifeq ($(WIRE), 1)
-  # Old libraries (avr-core 1.6.21 / Arduino < 1.6.8)
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
 endif
 ifeq ($(NEOPIXEL), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
@@ -712,23 +621,13 @@ ifeq ($(WIRE), 1)
   LIB_CXXSRC += Wire.cpp
 endif
 
-ifeq ($(TONE), 1)
-  LIB_CXXSRC += Tone.cpp
-endif
-
 ifeq ($(U8GLIB), 1)
   LIB_CXXSRC += U8glib.cpp
-  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c \
+  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
-    u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c \
-    u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
 endif
 
 ifeq ($(TMC), 1)
-  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp \
+  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
-    CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp \
-    DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp \
-    SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp \
-    TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
 endif
 
 ifeq ($(RELOC_WORKAROUND), 1)
@@ -770,23 +669,17 @@ REMOVE = rm -f
 MV = mv -f
 
 # Place -D or -U options here
-CDEFS    = -DF_CPU=$(F_CPU)UL ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
+CDEFS    = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
 CXXDEFS  = $(CDEFS)
 
 ifeq ($(HARDWARE_VARIANT), Teensy)
-  CDEFS      += -DUSB_SERIAL
+  CDEFS  += -DUSB_SERIAL
   LIB_SRC    += usb.c pins_teensy.c
   LIB_CXXSRC += usb_api.cpp
 
 else ifeq ($(HARDWARE_VARIANT), archim)
-  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__
+  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
-  CDEFS      += -DUSB_VID=0x27B1 -DUSB_PID=0x0001 -DUSBCON
+  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp  USBCore.cpp
-  CDEFS      += '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
-
-  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp \
-    UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp \
-    PluggableUSB.cpp USBCore.cpp
-
   LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
 
   ifeq ($(U8GLIB), 1)
@@ -812,20 +705,16 @@ CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
 ifneq ($(HARDWARE_MOTHERBOARD),)
   CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
 endif
-
 #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
 CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti
 CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA)   $(CTUNING) $(CSTANDARD)
 CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD)
 ASFLAGS :=          $(CDEFS)
 #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
-
 ifeq ($(HARDWARE_VARIANT), archim)
   LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
   LD_SUFFIX = $(LDLIBS)
-
+  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
-  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty
-  LDFLAGS  += -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
 else
   LD_PREFIX = -Wl,--gc-sections,--relax
   LDFLAGS   = -lm
@@ -841,7 +730,7 @@ else
   AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
 endif
 AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
-  -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
+  -p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
   -b$(UPLOAD_RATE)
 
 # Since Marlin 2.0, the source files may be distributed into several
@@ -942,7 +831,7 @@ extcoff: $(TARGET).elf
 
 .elf.eep:
 	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-	  --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+    --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
 # Create extended listing file from ELF output file.
 .elf.lss:
@@ -956,7 +845,7 @@ extcoff: $(TARGET).elf
 
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
-	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
+	$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
 
 # Object files that were found in "src" will be stored in $(BUILD_DIR)
 # in directories that mirror the structure of "src"

Marlin/Marlin.ino

@@ -1,8 +1,9 @@
-/*==============================================================================
+/*
+================================================================================
 
   Marlin Firmware
 
-  (c) 2011-2020 MarlinFirmware
+  (c) 2011-2019 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 
@@ -11,33 +12,30 @@
 Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware.
 
 To configure Marlin you must edit Configuration.h and Configuration_adv.h
-located in the root 'Marlin' folder. Check our Configurations repository to
+located in the root 'Marlin' folder. Check the config/examples folder to see if
-see if there's a more suitable starting-point for your specific hardware.
+there's a more suitable starting-point for your specific hardware.
 
 Before diving in, we recommend the following essential links:
 
 Marlin Firmware Official Website
 
-  - https://marlinfw.org/
+  - http://marlinfw.org/
     The official Marlin Firmware website contains the most up-to-date
     documentation. Contributions are always welcome!
 
 Configuration
 
-  - https://github.com/MarlinFirmware/Configurations
-    Example configurations for several printer models.
-
   - https://www.youtube.com/watch?v=3gwWVFtdg-4
     A good 20-minute overview of Marlin configuration by Tom Sanladerer.
     (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
     Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin
 
-  - https://marlinfw.org/docs/configuration/configuration.html
+  - http://marlinfw.org/docs/configuration/configuration.html
     Marlin's configuration options are explained in more detail here.
 
 Getting Help
 
-  - https://reprap.org/forum/list.php?415
+  - http://forums.reprap.org/list.php?415
     The Marlin Discussion Forum is a great place to get help from other Marlin
     users who may have experienced similar issues to your own.
 
@@ -47,11 +45,9 @@ Getting Help
 
 Contributing
 
-  - https://marlinfw.org/docs/development/contributing.html
+  - http://marlinfw.org/docs/development/contributing.html
     If you'd like to contribute to Marlin, read this first!
 
-  - https://marlinfw.org/docs/development/coding_standards.html
+  - http://marlinfw.org/docs/development/coding_standards.html
     Before submitting code get to know the Coding Standards.
-
+*/
-
-------------------------------------------------------------------------------*/

Marlin/Version.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,20 +28,20 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "2.0.7.4"
+//#define SHORT_BUILD_VERSION "2.0.3"
 
 /**
  * Verbose version identifier which should contain a reference to the location
  * from where the binary was downloaded or the source code was compiled.
  */
-//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION
+//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (Github)"
 
 /**
  * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2023-12-08"
+//#define STRING_DISTRIBUTION_DATE "2020-01-31"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -65,12 +65,12 @@
  * The WEBSITE_URL is the location where users can get more information such as
  * documentation about a specific Marlin release.
  */
-//#define WEBSITE_URL "https://marlinfw.org"
+//#define WEBSITE_URL "http://marlinfw.org"
 
 /**
  * Set the vendor info the serial USB interface, if changable
  * Currently only supported by DUE platform
  */
-//#define USB_DEVICE_VENDOR_ID           0x0000
+//#define  USB_DEVICE_VENDOR_ID           0x0000
-//#define USB_DEVICE_PRODUCT_ID          0x0000
+//#define  USB_DEVICE_PRODUCT_ID          0x0000
-//#define USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL
+//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL

Marlin/lib/readme.txt

@@ -33,4 +33,4 @@ PlatformIO will find your libraries automatically, configure preprocessor's
 include paths and build them.
 
 More information about PlatformIO Library Dependency Finder
-- https://docs.platformio.org/page/librarymanager/ldf.html
+- http://docs.platformio.org/page/librarymanager/ldf.html

Marlin/src/HAL/AVR/HAL.h

@@ -1,191 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include "../shared/Marduino.h"
-#include "../shared/HAL_SPI.h"
-#include "fastio.h"
-#include "watchdog.h"
-#include "math.h"
-
-#ifdef IS_AT90USB
-  #include <HardwareSerial.h>
-#else
-  #define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
-  #include "MarlinSerial.h"
-#endif
-
-#include <stdint.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-#include <avr/io.h>
-
-#ifndef pgm_read_ptr
-  // Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
-  // Windows Subsystem for Linux on Windows 10 as of 10/18/2019
-  #define pgm_read_ptr_far(address_long) (void*)__ELPM_word((uint32_t)(address_long))
-  #define pgm_read_ptr_near(address_short) (void*)__LPM_word((uint16_t)(address_short))
-  #define pgm_read_ptr(address_short) pgm_read_ptr_near(address_short)
-#endif
-
-// ------------------------
-// Defines
-// ------------------------
-
-// AVR PROGMEM extension for sprintf_P
-#define S_FMT "%S"
-
-// AVR PROGMEM extension for string define
-#define PGMSTR(NAM,STR) const char NAM[] PROGMEM = STR
-
-#ifndef CRITICAL_SECTION_START
-  #define CRITICAL_SECTION_START()  unsigned char _sreg = SREG; cli()
-  #define CRITICAL_SECTION_END()    SREG = _sreg
-#endif
-#define ISRS_ENABLED() TEST(SREG, SREG_I)
-#define ENABLE_ISRS()  sei()
-#define DISABLE_ISRS() cli()
-
-// ------------------------
-// Types
-// ------------------------
-
-typedef int8_t pin_t;
-
-#define SHARED_SERVOS HAS_SERVOS
-#define HAL_SERVO_LIB Servo
-
-// ------------------------
-// Public Variables
-// ------------------------
-
-//extern uint8_t MCUSR;
-
-// Serial ports
-#ifdef IS_AT90USB
-  #define MYSERIAL0 TERN(BLUETOOTH, bluetoothSerial, Serial)
-#else
-  #if !WITHIN(SERIAL_PORT, -1, 3)
-    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #endif
-  #define MYSERIAL0 customizedSerial1
-
-  #ifdef SERIAL_PORT_2
-    #if !WITHIN(SERIAL_PORT_2, -1, 3)
-      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
-    #endif
-    #define MYSERIAL1 customizedSerial2
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if !WITHIN(LCD_SERIAL_PORT, -1, 3)
-    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #endif
-  #define LCD_SERIAL lcdSerial
-  #if HAS_DGUS_LCD
-    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
-  #endif
-#endif
-
-// ------------------------
-// Public functions
-// ------------------------
-
-void HAL_init();
-
-//void cli();
-
-//void _delay_ms(const int delay);
-
-inline void HAL_clear_reset_source() { MCUSR = 0; }
-inline uint8_t HAL_get_reset_source() { return MCUSR; }
-
-inline void HAL_reboot() {}  // reboot the board or restart the bootloader
-
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
-extern "C" {
-  int freeMemory();
-}
-#pragma GCC diagnostic pop
-
-// ADC
-#ifdef DIDR2
-  #define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0)
-#else
-  #define HAL_ANALOG_SELECT(ind) SBI(DIDR0, ind);
-#endif
-
-inline void HAL_adc_init() {
-  ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
-  DIDR0 = 0;
-  #ifdef DIDR2
-    DIDR2 = 0;
-  #endif
-}
-
-#define SET_ADMUX_ADCSRA(ch) ADMUX = _BV(REFS0) | (ch & 0x07); SBI(ADCSRA, ADSC)
-#ifdef MUX5
-  #define HAL_START_ADC(ch) if (ch > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
-#else
-  #define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
-#endif
-
-#define HAL_ADC_VREF        5.0
-#define HAL_ADC_RESOLUTION 10
-#define HAL_READ_ADC()  ADC
-#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
-
-#define GET_PIN_MAP_PIN(index) index
-#define GET_PIN_MAP_INDEX(pin) pin
-#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
-
-#define HAL_SENSITIVE_PINS 0, 1
-
-#ifdef __AVR_AT90USB1286__
-  #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
-#endif
-
-// AVR compatibility
-#define strtof strtod
-
-#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
-
-/**
- *  set_pwm_frequency
- *  Sets the frequency of the timer corresponding to the provided pin
- *  as close as possible to the provided desired frequency. Internally
- *  calculates the required waveform generation mode, prescaler and
- *  resolution values required and sets the timer registers accordingly.
- *  NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
- *  NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings)
- */
-void set_pwm_frequency(const pin_t pin, int f_desired);
-
-/**
- * set_pwm_duty
- *  Sets the PWM duty cycle of the provided pin to the provided value
- *  Optionally allows inverting the duty cycle [default = false]
- *  Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
- */
-void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);

Marlin/src/HAL/AVR/MarlinSerial.cpp

@@ -1,802 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * MarlinSerial.cpp - Hardware serial library for Wiring
- * Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
- *
- * Modified 23 November 2006 by David A. Mellis
- * Modified 28 September 2010 by Mark Sproul
- * Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
- * Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
- * Modified 10 June 2018 by Eduardo José Tagle (See #10991)
- * Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
- */
-
-#ifdef __AVR__
-
-// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
-
-#include "../../inc/MarlinConfig.h"
-
-#if !IS_AT90USB && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
-
-#include "MarlinSerial.h"
-#include "../../MarlinCore.h"
-
-#if ENABLED(DIRECT_STEPPING)
-  #include "../../feature/direct_stepping.h"
-#endif
-
-template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
-template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };
-template<typename Cfg> bool     MarlinSerial<Cfg>::_written = false;
-template<typename Cfg> uint8_t  MarlinSerial<Cfg>::xon_xoff_state = MarlinSerial<Cfg>::XON_XOFF_CHAR_SENT | MarlinSerial<Cfg>::XON_CHAR;
-template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_dropped_bytes = 0;
-template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_buffer_overruns = 0;
-template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_framing_errors = 0;
-template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::rx_max_enqueued = 0;
-
-// A SW memory barrier, to ensure GCC does not overoptimize loops
-#define sw_barrier() asm volatile("": : :"memory");
-
-#include "../../feature/e_parser.h"
-
-// "Atomically" read the RX head index value without disabling interrupts:
-// This MUST be called with RX interrupts enabled, and CAN'T be called
-// from the RX ISR itself!
-template<typename Cfg>
-FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_head() {
-  if (Cfg::RX_SIZE > 256) {
-    // Keep reading until 2 consecutive reads return the same value,
-    // meaning there was no update in-between caused by an interrupt.
-    // This works because serial RX interrupts happen at a slower rate
-    // than successive reads of a variable, so 2 consecutive reads with
-    // the same value means no interrupt updated it.
-    ring_buffer_pos_t vold, vnew = rx_buffer.head;
-    sw_barrier();
-    do {
-      vold = vnew;
-      vnew = rx_buffer.head;
-      sw_barrier();
-    } while (vold != vnew);
-    return vnew;
-  }
-  else {
-    // With an 8bit index, reads are always atomic. No need for special handling
-    return rx_buffer.head;
-  }
-}
-
-template<typename Cfg>
-volatile bool MarlinSerial<Cfg>::rx_tail_value_not_stable = false;
-template<typename Cfg>
-volatile uint16_t MarlinSerial<Cfg>::rx_tail_value_backup = 0;
-
-// Set RX tail index, taking into account the RX ISR could interrupt
-//  the write to this variable in the middle - So a backup strategy
-//  is used to ensure reads of the correct values.
-//    -Must NOT be called from the RX ISR -
-template<typename Cfg>
-FORCE_INLINE void MarlinSerial<Cfg>::atomic_set_rx_tail(typename MarlinSerial<Cfg>::ring_buffer_pos_t value) {
-  if (Cfg::RX_SIZE > 256) {
-    // Store the new value in the backup
-    rx_tail_value_backup = value;
-    sw_barrier();
-    // Flag we are about to change the true value
-    rx_tail_value_not_stable = true;
-    sw_barrier();
-    // Store the new value
-    rx_buffer.tail = value;
-    sw_barrier();
-    // Signal the new value is completely stored into the value
-    rx_tail_value_not_stable = false;
-    sw_barrier();
-  }
-  else
-    rx_buffer.tail = value;
-}
-
-// Get the RX tail index, taking into account the read could be
-//  interrupting in the middle of the update of that index value
-//    -Called from the RX ISR -
-template<typename Cfg>
-FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_tail() {
-  if (Cfg::RX_SIZE > 256) {
-    // If the true index is being modified, return the backup value
-    if (rx_tail_value_not_stable) return rx_tail_value_backup;
-  }
-  // The true index is stable, return it
-  return rx_buffer.tail;
-}
-
-// (called with RX interrupts disabled)
-template<typename Cfg>
-FORCE_INLINE void MarlinSerial<Cfg>::store_rxd_char() {
-
-  static EmergencyParser::State emergency_state; // = EP_RESET
-
-  // This must read the R_UCSRA register before reading the received byte to detect error causes
-  if (Cfg::DROPPED_RX && B_DOR && !++rx_dropped_bytes) --rx_dropped_bytes;
-  if (Cfg::RX_OVERRUNS && B_DOR && !++rx_buffer_overruns) --rx_buffer_overruns;
-  if (Cfg::RX_FRAMING_ERRORS && B_FE && !++rx_framing_errors) --rx_framing_errors;
-
-  // Read the character from the USART
-  uint8_t c = R_UDR;
-
-  #if ENABLED(DIRECT_STEPPING)
-    if (page_manager.maybe_store_rxd_char(c)) return;
-  #endif
-
-  // Get the tail - Nothing can alter its value while this ISR is executing, but there's
-  // a chance that this ISR interrupted the main process while it was updating the index.
-  // The backup mechanism ensures the correct value is always returned.
-  const ring_buffer_pos_t t = atomic_read_rx_tail();
-
-  // Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
-  ring_buffer_pos_t h = rx_buffer.head;
-
-  // Get the next element
-  ring_buffer_pos_t i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-  if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
-
-  // If the character is to be stored at the index just before the tail
-  // (such that the head would advance to the current tail), the RX FIFO is
-  // full, so don't write the character or advance the head.
-  if (i != t) {
-    rx_buffer.buffer[h] = c;
-    h = i;
-  }
-  else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
-    --rx_dropped_bytes;
-
-  if (Cfg::MAX_RX_QUEUED) {
-    // Calculate count of bytes stored into the RX buffer
-    const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-    // Keep track of the maximum count of enqueued bytes
-    NOLESS(rx_max_enqueued, rx_count);
-  }
-
-  if (Cfg::XONOFF) {
-    // If the last char that was sent was an XON
-    if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) {
-
-      // Bytes stored into the RX buffer
-      const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-      // If over 12.5% of RX buffer capacity, send XOFF before running out of
-      // RX buffer space .. 325 bytes @ 250kbits/s needed to let the host react
-      // and stop sending bytes. This translates to 13mS propagation time.
-      if (rx_count >= (Cfg::RX_SIZE) / 8) {
-
-        // At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted.
-        // Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens
-        // to be in the middle of trying to disable the RX interrupt in the main program, eventually the
-        // enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure
-        // the sending of the XOFF char is to send it HERE AND NOW.
-
-        // About to send the XOFF char
-        xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
-
-        // Wait until the TX register becomes empty and send it - Here there could be a problem
-        // - While waiting for the TX register to empty, the RX register could receive a new
-        //   character. This must also handle that situation!
-        while (!B_UDRE) {
-
-          if (B_RXC) {
-            // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
-
-            i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-            // Read the character from the USART
-            c = R_UDR;
-
-            if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
-
-            // If the character is to be stored at the index just before the tail
-            // (such that the head would advance to the current tail), the FIFO is
-            // full, so don't write the character or advance the head.
-            if (i != t) {
-              rx_buffer.buffer[h] = c;
-              h = i;
-            }
-            else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
-              --rx_dropped_bytes;
-          }
-          sw_barrier();
-        }
-
-        R_UDR = XOFF_CHAR;
-
-        // Clear the TXC bit -- "can be cleared by writing a one to its bit
-        // location". This makes sure flush() won't return until the bytes
-        // actually got written
-        B_TXC = 1;
-
-        // At this point there could be a race condition between the write() function
-        // and this sending of the XOFF char. This interrupt could happen between the
-        // wait to be empty TX buffer loop and the actual write of the character. Since
-        // the TX buffer is full because it's sending the XOFF char, the only way to be
-        // sure the write() function will succeed is to wait for the XOFF char to be
-        // completely sent. Since an extra character could be received during the wait
-        // it must also be handled!
-        while (!B_UDRE) {
-
-          if (B_RXC) {
-            // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
-
-            i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-            // Read the character from the USART
-            c = R_UDR;
-
-            if (Cfg::EMERGENCYPARSER)
-              emergency_parser.update(emergency_state, c);
-
-            // If the character is to be stored at the index just before the tail
-            // (such that the head would advance to the current tail), the FIFO is
-            // full, so don't write the character or advance the head.
-            if (i != t) {
-              rx_buffer.buffer[h] = c;
-              h = i;
-            }
-            else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
-              --rx_dropped_bytes;
-          }
-          sw_barrier();
-        }
-
-        // At this point everything is ready. The write() function won't
-        // have any issues writing to the UART TX register if it needs to!
-      }
-    }
-  }
-
-  // Store the new head value - The main loop will retry until the value is stable
-  rx_buffer.head = h;
-}
-
-// (called with TX irqs disabled)
-template<typename Cfg>
-FORCE_INLINE void MarlinSerial<Cfg>::_tx_udr_empty_irq() {
-  if (Cfg::TX_SIZE > 0) {
-    // Read positions
-    uint8_t t = tx_buffer.tail;
-    const uint8_t h = tx_buffer.head;
-
-    if (Cfg::XONOFF) {
-      // If an XON char is pending to be sent, do it now
-      if (xon_xoff_state == XON_CHAR) {
-
-        // Send the character
-        R_UDR = XON_CHAR;
-
-        // clear the TXC bit -- "can be cleared by writing a one to its bit
-        // location". This makes sure flush() won't return until the bytes
-        // actually got written
-        B_TXC = 1;
-
-        // Remember we sent it.
-        xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
-
-        // If nothing else to transmit, just disable TX interrupts.
-        if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
-
-        return;
-      }
-    }
-
-    // If nothing to transmit, just disable TX interrupts. This could
-    // happen as the result of the non atomicity of the disabling of RX
-    // interrupts that could end reenabling TX interrupts as a side effect.
-    if (h == t) {
-      B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
-      return;
-    }
-
-    // There is something to TX, Send the next byte
-    const uint8_t c = tx_buffer.buffer[t];
-    t = (t + 1) & (Cfg::TX_SIZE - 1);
-    R_UDR = c;
-    tx_buffer.tail = t;
-
-    // Clear the TXC bit (by writing a one to its bit location).
-    // Ensures flush() won't return until the bytes are actually written/
-    B_TXC = 1;
-
-    // Disable interrupts if there is nothing to transmit following this byte
-    if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
-  }
-}
-
-// Public Methods
-template<typename Cfg>
-void MarlinSerial<Cfg>::begin(const long baud) {
-  uint16_t baud_setting;
-  bool useU2X = true;
-
-  #if F_CPU == 16000000UL && SERIAL_PORT == 0
-    // Hard-coded exception for compatibility with the bootloader shipped
-    // with the Duemilanove and previous boards, and the firmware on the
-    // 8U2 on the Uno and Mega 2560.
-    if (baud == 57600) useU2X = false;
-  #endif
-
-  R_UCSRA = 0;
-  if (useU2X) {
-    B_U2X = 1;
-    baud_setting = (F_CPU / 4 / baud - 1) / 2;
-  }
-  else
-    baud_setting = (F_CPU / 8 / baud - 1) / 2;
-
-  // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
-  R_UBRRH = baud_setting >> 8;
-  R_UBRRL = baud_setting;
-
-  B_RXEN = 1;
-  B_TXEN = 1;
-  B_RXCIE = 1;
-  if (Cfg::TX_SIZE > 0) B_UDRIE = 0;
-  _written = false;
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::end() {
-  B_RXEN = 0;
-  B_TXEN = 0;
-  B_RXCIE = 0;
-  B_UDRIE = 0;
-}
-
-template<typename Cfg>
-int MarlinSerial<Cfg>::peek() {
-  const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
-  return h == t ? -1 : rx_buffer.buffer[t];
-}
-
-template<typename Cfg>
-int MarlinSerial<Cfg>::read() {
-  const ring_buffer_pos_t h = atomic_read_rx_head();
-
-  // Read the tail. Main thread owns it, so it is safe to directly read it
-  ring_buffer_pos_t t = rx_buffer.tail;
-
-  // If nothing to read, return now
-  if (h == t) return -1;
-
-  // Get the next char
-  const int v = rx_buffer.buffer[t];
-  t = (ring_buffer_pos_t)(t + 1) & (Cfg::RX_SIZE - 1);
-
-  // Advance tail - Making sure the RX ISR will always get an stable value, even
-  // if it interrupts the writing of the value of that variable in the middle.
-  atomic_set_rx_tail(t);
-
-  if (Cfg::XONOFF) {
-    // If the XOFF char was sent, or about to be sent...
-    if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
-      // Get count of bytes in the RX buffer
-      const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-      if (rx_count < (Cfg::RX_SIZE) / 10) {
-        if (Cfg::TX_SIZE > 0) {
-          // Signal we want an XON character to be sent.
-          xon_xoff_state = XON_CHAR;
-          // Enable TX ISR. Non atomic, but it will eventually enable them
-          B_UDRIE = 1;
-        }
-        else {
-          // If not using TX interrupts, we must send the XON char now
-          xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
-          while (!B_UDRE) sw_barrier();
-          R_UDR = XON_CHAR;
-        }
-      }
-    }
-  }
-
-  return v;
-}
-
-template<typename Cfg>
-typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::available() {
-  const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
-  return (ring_buffer_pos_t)(Cfg::RX_SIZE + h - t) & (Cfg::RX_SIZE - 1);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::flush() {
-
-  // Set the tail to the head:
-  //  - Read the RX head index in a safe way. (See atomic_read_rx_head.)
-  //  - Set the tail, making sure the RX ISR will always get a stable value, even
-  //    if it interrupts the writing of the value of that variable in the middle.
-  atomic_set_rx_tail(atomic_read_rx_head());
-
-  if (Cfg::XONOFF) {
-    // If the XOFF char was sent, or about to be sent...
-    if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
-      if (Cfg::TX_SIZE > 0) {
-        // Signal we want an XON character to be sent.
-        xon_xoff_state = XON_CHAR;
-        // Enable TX ISR. Non atomic, but it will eventually enable it.
-        B_UDRIE = 1;
-      }
-      else {
-        // If not using TX interrupts, we must send the XON char now
-        xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
-        while (!B_UDRE) sw_barrier();
-        R_UDR = XON_CHAR;
-      }
-    }
-  }
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::write(const uint8_t c) {
-  if (Cfg::TX_SIZE == 0) {
-
-    _written = true;
-    while (!B_UDRE) sw_barrier();
-    R_UDR = c;
-
-  }
-  else {
-
-    _written = true;
-
-    // If the TX interrupts are disabled and the data register
-    // is empty, just write the byte to the data register and
-    // be done. This shortcut helps significantly improve the
-    // effective datarate at high (>500kbit/s) bitrates, where
-    // interrupt overhead becomes a slowdown.
-    // Yes, there is a race condition between the sending of the
-    // XOFF char at the RX ISR, but it is properly handled there
-    if (!B_UDRIE && B_UDRE) {
-      R_UDR = c;
-
-      // clear the TXC bit -- "can be cleared by writing a one to its bit
-      // location". This makes sure flush() won't return until the bytes
-      // actually got written
-      B_TXC = 1;
-      return;
-    }
-
-    const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
-
-    // If global interrupts are disabled (as the result of being called from an ISR)...
-    if (!ISRS_ENABLED()) {
-
-      // Make room by polling if it is possible to transmit, and do so!
-      while (i == tx_buffer.tail) {
-
-        // If we can transmit another byte, do it.
-        if (B_UDRE) _tx_udr_empty_irq();
-
-        // Make sure compiler rereads tx_buffer.tail
-        sw_barrier();
-      }
-    }
-    else {
-      // Interrupts are enabled, just wait until there is space
-      while (i == tx_buffer.tail) sw_barrier();
-    }
-
-    // Store new char. head is always safe to move
-    tx_buffer.buffer[tx_buffer.head] = c;
-    tx_buffer.head = i;
-
-    // Enable TX ISR - Non atomic, but it will eventually enable TX ISR
-    B_UDRIE = 1;
-  }
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::flushTX() {
-
-  if (Cfg::TX_SIZE == 0) {
-    // No bytes written, no need to flush. This special case is needed since there's
-    // no way to force the TXC (transmit complete) bit to 1 during initialization.
-    if (!_written) return;
-
-    // Wait until everything was transmitted
-    while (!B_TXC) sw_barrier();
-
-    // At this point nothing is queued anymore (DRIE is disabled) and
-    // the hardware finished transmission (TXC is set).
-
-  }
-  else {
-
-    // No bytes written, no need to flush. This special case is needed since there's
-    // no way to force the TXC (transmit complete) bit to 1 during initialization.
-    if (!_written) return;
-
-    // If global interrupts are disabled (as the result of being called from an ISR)...
-    if (!ISRS_ENABLED()) {
-
-      // Wait until everything was transmitted - We must do polling, as interrupts are disabled
-      while (tx_buffer.head != tx_buffer.tail || !B_TXC) {
-
-        // If there is more space, send an extra character
-        if (B_UDRE) _tx_udr_empty_irq();
-
-        sw_barrier();
-      }
-
-    }
-    else {
-      // Wait until everything was transmitted
-      while (tx_buffer.head != tx_buffer.tail || !B_TXC) sw_barrier();
-    }
-
-    // At this point nothing is queued anymore (DRIE is disabled) and
-    // the hardware finished transmission (TXC is set).
-  }
-}
-
-/**
- * Imports from print.h
- */
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(char c, int base) {
-  print((long)c, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned char b, int base) {
-  print((unsigned long)b, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(int n, int base) {
-  print((long)n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned int n, int base) {
-  print((unsigned long)n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(long n, int base) {
-  if (base == 0) write(n);
-  else if (base == 10) {
-    if (n < 0) { print('-'); n = -n; }
-    printNumber(n, 10);
-  }
-  else
-    printNumber(n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned long n, int base) {
-  if (base == 0) write(n);
-  else printNumber(n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(double n, int digits) {
-  printFloat(n, digits);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println() {
-  print('\r');
-  print('\n');
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(const String& s) {
-  print(s);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(const char c[]) {
-  print(c);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(char c, int base) {
-  print(c, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned char b, int base) {
-  print(b, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(int n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned int n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(long n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned long n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(double n, int digits) {
-  print(n, digits);
-  println();
-}
-
-// Private Methods
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::printNumber(unsigned long n, uint8_t base) {
-  if (n) {
-    unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
-    int8_t i = 0;
-    while (n) {
-      buf[i++] = n % base;
-      n /= base;
-    }
-    while (i--)
-      print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
-  }
-  else
-    print('0');
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
-  // Handle negative numbers
-  if (number < 0.0) {
-    print('-');
-    number = -number;
-  }
-
-  // Round correctly so that print(1.999, 2) prints as "2.00"
-  double rounding = 0.5;
-  LOOP_L_N(i, digits) rounding *= 0.1;
-  number += rounding;
-
-  // Extract the integer part of the number and print it
-  unsigned long int_part = (unsigned long)number;
-  double remainder = number - (double)int_part;
-  print(int_part);
-
-  // Print the decimal point, but only if there are digits beyond
-  if (digits) {
-    print('.');
-    // Extract digits from the remainder one at a time
-    while (digits--) {
-      remainder *= 10.0;
-      int toPrint = int(remainder);
-      print(toPrint);
-      remainder -= toPrint;
-    }
-  }
-}
-
-// Hookup ISR handlers
-ISR(SERIAL_REGNAME(USART, SERIAL_PORT, _RX_vect)) {
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::store_rxd_char();
-}
-
-ISR(SERIAL_REGNAME(USART, SERIAL_PORT, _UDRE_vect)) {
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::_tx_udr_empty_irq();
-}
-
-// Preinstantiate
-template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
-
-// Instantiate
-MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
-
-#ifdef SERIAL_PORT_2
-
-  // Hookup ISR handlers
-  ISR(SERIAL_REGNAME(USART, SERIAL_PORT_2, _RX_vect)) {
-    MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::store_rxd_char();
-  }
-
-  ISR(SERIAL_REGNAME(USART, SERIAL_PORT_2, _UDRE_vect)) {
-    MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::_tx_udr_empty_irq();
-  }
-
-  // Preinstantiate
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
-
-  // Instantiate
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
-
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-
-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _RX_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::store_rxd_char();
-  }
-
-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _UDRE_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::_tx_udr_empty_irq();
-  }
-
-  // Preinstantiate
-  template class MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>;
-
-  // Instantiate
-  MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>> mmuSerial;
-
-#endif
-
-#ifdef LCD_SERIAL_PORT
-
-  ISR(SERIAL_REGNAME(USART, LCD_SERIAL_PORT, _RX_vect)) {
-    MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>::store_rxd_char();
-  }
-
-  ISR(SERIAL_REGNAME(USART, LCD_SERIAL_PORT, _UDRE_vect)) {
-    MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>::_tx_udr_empty_irq();
-  }
-
-  // Preinstantiate
-  template class MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>;
-
-  // Instantiate
-  MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>> lcdSerial;
-
-  #if HAS_DGUS_LCD
-    template<typename Cfg>
-    typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
-      const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.
-                              h = tx_buffer.head;  // next pos for queue.
-      int ret = t - h - 1;
-      if (ret < 0) ret += Cfg::TX_SIZE + 1;
-      return ret;
-    }
-  #endif
-
-#endif
-
-#endif // !IS_AT90USB && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
-
-// For AT90USB targets use the UART for BT interfacing
-#if BOTH(IS_AT90USB, BLUETOOTH)
-  HardwareSerial bluetoothSerial;
-#endif
-
-#endif // __AVR__

Marlin/src/HAL/AVR/inc/Conditionals_LCD.h

@@ -1,26 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#if HAS_SPI_TFT || HAS_FSMC_TFT
-  #error "Sorry! TFT displays are not available for HAL/AVR."
-#endif

Marlin/src/HAL/DUE/fastio/G2_PWM.cpp

@@ -1,206 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * The PWM module is only used to generate interrupts at specified times. It
- * is NOT used to directly toggle pins. The ISR writes to the pin assigned to
- * that interrupt.
- *
- * All PWMs use the same repetition rate.  The G2 needs about 10KHz min in order to
- * not have obvious ripple on the Vref signals.
- *
- * The data structures are setup to minimize the computation done by the ISR which
- * minimizes ISR execution time.  Execution times are 0.8 to 1.1 microseconds.
- *
- * FIve PWM interrupt sources are used.  Channel 0 sets the base period.  All Vref
- * signals are set active when this counter overflows and resets to zero.  The compare
- * values in channels 1-4 are set to give the desired duty cycle for that Vref pin.
- * When counter 0 matches the compare value then that channel generates an interrupt.
- * The ISR checks the source of the interrupt and sets the corresponding pin inactive.
- *
- * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
- */
-
-#include "../../../inc/MarlinConfig.h"
-
-#if MB(PRINTRBOARD_G2)
-
-#include "G2_PWM.h"
-
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-  #define G2_PWM_X 1
-#else
-  #define G2_PWM_X 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-  #define G2_PWM_Y 1
-#else
-  #define G2_PWM_Y 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
-  #define G2_PWM_Z 1
-#else
-  #define G2_PWM_Z 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
-  #define G2_PWM_E 1
-#else
-  #define G2_PWM_E 0
-#endif
-#define G2_MASK_X(V) (G2_PWM_X * (V))
-#define G2_MASK_Y(V) (G2_PWM_Y * (V))
-#define G2_MASK_Z(V) (G2_PWM_Z * (V))
-#define G2_MASK_E(V) (G2_PWM_E * (V))
-
-volatile uint32_t *SODR_A = &PIOA->PIO_SODR,
-                  *SODR_B = &PIOB->PIO_SODR,
-                  *CODR_A = &PIOA->PIO_CODR,
-                  *CODR_B = &PIOB->PIO_CODR;
-
-PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
-
-void Stepper::digipot_init() {
-
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
-  #endif
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
-  #endif
-  #if G2_PWM_Z
-    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
-  #endif
-  #if G2_PWM_E
-    OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
-  #endif
-
-  #define WPKEY          (0x50574D << 8) // “PWM” in ASCII
-  #define WPCMD_DIS_SW   0  // command to disable Write Protect SW
-  #define WPRG_ALL       (PWM_WPCR_WPRG0 | PWM_WPCR_WPRG1 | PWM_WPCR_WPRG2 | PWM_WPCR_WPRG3 | PWM_WPCR_WPRG4 | PWM_WPCR_WPRG5)  // all Write Protect Groups
-
-  #define PWM_CLOCK_F    F_CPU / 1000000UL   // set clock to 1MHz
-
-  PMC->PMC_PCER1 = PMC_PCER1_PID36;                       // enable PWM controller clock (disabled on power up)
-
-  PWM->PWM_WPCR = WPKEY | WPRG_ALL | WPCMD_DIS_SW;        // enable setting of all PWM registers
-  PWM->PWM_CLK = PWM_CLOCK_F;                             // enable CLK_A and set it to 1MHz, leave CLK_B disabled
-  PWM->PWM_CH_NUM[0].PWM_CMR = 0b1011;                    // set channel 0 to Clock A input & to left aligned
-  if (G2_PWM_X) PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;      // set channel 1 to Clock A input & to left aligned
-  if (G2_PWM_Y) PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;      // set channel 2 to Clock A input & to left aligned
-  if (G2_PWM_Z) PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;      // set channel 3 to Clock A input & to left aligned
-  if (G2_PWM_E) PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;      // set channel 4 to Clock A input & to left aligned
-
-  PWM->PWM_CH_NUM[0].PWM_CPRD = PWM_PERIOD_US;            // set channel 0 Period
-
-  PWM->PWM_IER2 = PWM_IER1_CHID0;                         // generate interrupt when counter0 overflows
-  PWM->PWM_IER2 = PWM_IER2_CMPM0
-    | G2_MASK_X(PWM_IER2_CMPM1)
-    | G2_MASK_Y(PWM_IER2_CMPM2)
-    | G2_MASK_Z(PWM_IER2_CMPM3)
-    | G2_MASK_E(PWM_IER2_CMPM4)
-  ; // generate interrupt on compare event
-
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1])); // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2])); // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
-
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
-
-  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0
-    | G2_MASK_X(PWM_SCM_SYNC1)
-    | G2_MASK_Y(PWM_SCM_SYNC2)
-    | G2_MASK_Z(PWM_SCM_SYNC3)
-    | G2_MASK_E(PWM_SCM_SYNC4)
-  ; // sync 1-4 with 0, use mode 0 for updates
-
-  PWM->PWM_ENA = PWM_ENA_CHID0
-    | G2_MASK_X(PWM_ENA_CHID1)
-    | G2_MASK_Y(PWM_ENA_CHID2)
-    | G2_MASK_Z(PWM_ENA_CHID3)
-    | G2_MASK_E(PWM_ENA_CHID4)
-  ; // enable channels used by G2
-
-  PWM->PWM_IER1 = PWM_IER1_CHID0
-    | G2_MASK_X(PWM_IER1_CHID1)
-    | G2_MASK_Y(PWM_IER1_CHID2)
-    | G2_MASK_Z(PWM_IER1_CHID3)
-    | G2_MASK_E(PWM_IER1_CHID4)
-  ; // enable interrupts for channels used by G2
-
-  NVIC_EnableIRQ(PWM_IRQn);     // Enable interrupt handler
-  NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
-}
-
-void Stepper::set_digipot_current(const uint8_t driver, const int16_t current) {
-
-  if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
-
-  switch (driver) {
-    case 0:
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_X || G2_PWM_Y) PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      break;
-    case 1:
-      if (G2_PWM_Z) {
-        PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
-        PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
-    default:
-      if (G2_PWM_E) {
-        PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
-        PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
-  }
-}
-
-volatile uint32_t PWM_ISR1_STATUS, PWM_ISR2_STATUS;
-
-void PWM_Handler() {
-  PWM_ISR1_STATUS = PWM->PWM_ISR1;
-  PWM_ISR2_STATUS = PWM->PWM_ISR2;
-  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                                                         // CHAN_0 interrupt
-    if (G2_PWM_X) *ISR_table[0].set_register = ISR_table[0].write_mask;                           // set X to active
-    if (G2_PWM_Y) *ISR_table[1].set_register = ISR_table[1].write_mask;                           // set Y to active
-    if (G2_PWM_Z) *ISR_table[2].set_register = ISR_table[2].write_mask;                           // set Z to active
-    if (G2_PWM_E) *ISR_table[3].set_register = ISR_table[3].write_mask;                           // set E to active
-  }
-  else {
-    if (G2_PWM_X && (PWM_ISR2_STATUS & PWM_IER2_CMPM1)) *ISR_table[0].clr_register = ISR_table[0].write_mask; // set X to inactive
-    if (G2_PWM_Y && (PWM_ISR2_STATUS & PWM_IER2_CMPM2)) *ISR_table[1].clr_register = ISR_table[1].write_mask; // set Y to inactive
-    if (G2_PWM_Z && (PWM_ISR2_STATUS & PWM_IER2_CMPM3)) *ISR_table[2].clr_register = ISR_table[2].write_mask; // set Z to inactive
-    if (G2_PWM_E && (PWM_ISR2_STATUS & PWM_IER2_CMPM4)) *ISR_table[3].clr_register = ISR_table[3].write_mask; // set E to inactive
-  }
-  return;
-}
-
-#endif // PRINTRBOARD_G2

Marlin/src/HAL/DUE/inc/Conditionals_LCD.h

@@ -1,26 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#if HAS_SPI_TFT || HAS_FSMC_TFT
-  #error "Sorry! TFT displays are not available for HAL/DUE."
-#endif

Marlin/src/HAL/DUE/inc/Conditionals_post.h

@@ -1,28 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#if USE_FALLBACK_EEPROM
-  #define FLASH_EEPROM_EMULATION
-#elif EITHER(I2C_EEPROM, SPI_EEPROM)
-  #define USE_SHARED_EEPROM 1
-#endif

Marlin/src/HAL/DUE/upload_extra_script.py

@@ -1,18 +0,0 @@
-#
-# Set upload_command
-#
-#  Windows: bossac.exe
-#  Other: leave unchanged
-#
-
-import platform
-current_OS = platform.system()
-
-if current_OS == 'Windows':
-
-	Import("env")
-
-	# Use bossac.exe on Windows
-	env.Replace(
-	    UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot $SOURCE"
-	)

Marlin/src/HAL/ESP32/inc/Conditionals_LCD.h

@@ -1,26 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#if HAS_SPI_TFT || HAS_FSMC_TFT
-  #error "Sorry! TFT displays are not available for HAL/ESP32."
-#endif

Marlin/src/HAL/HAL.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -25,28 +25,10 @@
 
 #include HAL_PATH(.,HAL.h)
 
-#ifdef SERIAL_PORT_2
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
-#endif
-
 #define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)
 
-#ifndef I2C_ADDRESS
-  #define I2C_ADDRESS(A) uint8_t(A)
-#endif
-
-// Needed for AVR sprintf_P PROGMEM extension
-#ifndef S_FMT
-  #define S_FMT "%s"
-#endif
-
-// String helper
-#ifndef PGMSTR
-  #define PGMSTR(NAM,STR) const char NAM[] = STR
-#endif
-
 inline void watchdog_refresh() {
-  TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
+  #if ENABLED(USE_WATCHDOG)
+    HAL_watchdog_refresh();
+  #endif
 }

Marlin/src/HAL/HAL_AVR/HAL.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,9 +16,10 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/HAL_AVR/HAL.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  *
  * This program is free software: you can redistribute it and/or modify
@@ -14,12 +14,54 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
  */
 #pragma once
 
+#include "../shared/Marduino.h"
+#include "../shared/HAL_SPI.h"
+#include "fastio.h"
+#include "watchdog.h"
+#include "math.h"
+
+#ifdef USBCON
+  #include <HardwareSerial.h>
+#else
+  #define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
+  #include "MarlinSerial.h"
+#endif
+
 #include <stdint.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+#ifndef pgm_read_ptr
+  // Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
+  // Windows Subsystem for Linux on Windows 10 as of 10/18/2019
+  #define pgm_read_ptr_far(address_long) (void*)__ELPM_word((uint32_t)(address_long))
+  #define pgm_read_ptr_near(address_short) (void*)__LPM_word((uint16_t)(address_short))
+  #define pgm_read_ptr(address_short) pgm_read_ptr_near(address_short)
+#endif
+
+// ------------------------
+// Defines
+// ------------------------
+
+//#define analogInputToDigitalPin(IO) IO
+
+#ifndef CRITICAL_SECTION_START
+  #define CRITICAL_SECTION_START  unsigned char _sreg = SREG; cli()
+  #define CRITICAL_SECTION_END    SREG = _sreg
+#endif
+#define ISRS_ENABLED() TEST(SREG, SREG_I)
+#define ENABLE_ISRS()  sei()
+#define DISABLE_ISRS() cli()
+
+// On AVR this is in math.h?
+//#define square(x) ((x)*(x))
 
 // ------------------------
 // Types
@@ -28,21 +70,84 @@
 typedef uint16_t hal_timer_t;
 #define HAL_TIMER_TYPE_MAX 0xFFFF
 
+typedef int8_t pin_t;
+
+#define SHARED_SERVOS HAS_SERVOS
+#define HAL_SERVO_LIB Servo
+
 // ------------------------
-// Defines
+// Public Variables
 // ------------------------
 
+//extern uint8_t MCUSR;
+
+// Serial ports
+#ifdef USBCON
+  #if ENABLED(BLUETOOTH)
+    #define MYSERIAL0 bluetoothSerial
+  #else
+    #define MYSERIAL0 Serial
+  #endif
+  #define NUM_SERIAL 1
+#else
+  #if !WITHIN(SERIAL_PORT, -1, 3)
+    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #endif
+
+  #define MYSERIAL0 customizedSerial1
+
+  #ifdef SERIAL_PORT_2
+    #if !WITHIN(SERIAL_PORT_2, -1, 3)
+      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+    #elif SERIAL_PORT_2 == SERIAL_PORT
+      #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
+    #endif
+    #define MYSERIAL1 customizedSerial2
+    #define NUM_SERIAL 2
+  #else
+    #define NUM_SERIAL 1
+  #endif
+#endif
+
+#ifdef DGUS_SERIAL_PORT
+  #if !WITHIN(DGUS_SERIAL_PORT, -1, 3)
+    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #elif DGUS_SERIAL_PORT == SERIAL_PORT
+    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
+  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
+    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+  #endif
+  #define DGUS_SERIAL internalDgusSerial
+
+  #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.get_tx_buffer_free
+#endif
+
+// ------------------------
+// Public functions
+// ------------------------
+
+void HAL_init();
+
+//void cli();
+
+//void _delay_ms(const int delay);
+
+inline void HAL_clear_reset_source() { MCUSR = 0; }
+inline uint8_t HAL_get_reset_source() { return MCUSR; }
+
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wunused-function"
+extern "C" {
+  int freeMemory();
+}
+#pragma GCC diagnostic pop
+
+// timers
 #define HAL_TIMER_RATE          ((F_CPU) / 8)    // i.e., 2MHz or 2.5MHz
 
-#ifndef STEP_TIMER_NUM
+#define STEP_TIMER_NUM          1
-  #define STEP_TIMER_NUM        1
+#define TEMP_TIMER_NUM          0
-#endif
+#define PULSE_TIMER_NUM         STEP_TIMER_NUM
-#ifndef PULSE_TIMER_NUM
-  #define PULSE_TIMER_NUM       STEP_TIMER_NUM
-#endif
-#ifndef TEMP_TIMER_NUM
-  #define TEMP_TIMER_NUM        0
-#endif
 
 #define TEMP_TIMER_FREQUENCY    ((F_CPU) / 64.0 / 256.0)
 
@@ -113,8 +218,6 @@ FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
 #define HAL_timer_isr_epilogue(TIMER_NUM)
 
 /* 18 cycles maximum latency */
-#ifndef HAL_STEP_TIMER_ISR
-
 #define HAL_STEP_TIMER_ISR() \
 extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
 extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
@@ -187,10 +290,6 @@ void TIMER1_COMPA_vect() { \
 } \
 void TIMER1_COMPA_vect_bottom()
 
-#endif // HAL_STEP_TIMER_ISR
-
-#ifndef HAL_TEMP_TIMER_ISR
-
 /* 14 cycles maximum latency */
 #define HAL_TEMP_TIMER_ISR() \
 extern "C" void TIMER0_COMPB_vect() __attribute__ ((signal, naked, used, externally_visible)); \
@@ -257,4 +356,60 @@ void TIMER0_COMPB_vect() { \
 } \
 void TIMER0_COMPB_vect_bottom()
 
-#endif // HAL_TEMP_TIMER_ISR
+// ADC
+#ifdef DIDR2
+  #define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0)
+#else
+  #define HAL_ANALOG_SELECT(ind) SBI(DIDR0, ind);
+#endif
+
+inline void HAL_adc_init() {
+  ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
+  DIDR0 = 0;
+  #ifdef DIDR2
+    DIDR2 = 0;
+  #endif
+}
+
+#define SET_ADMUX_ADCSRA(ch) ADMUX = _BV(REFS0) | (ch & 0x07); SBI(ADCSRA, ADSC)
+#ifdef MUX5
+  #define HAL_START_ADC(ch) if (ch > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
+#else
+  #define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
+#endif
+
+#define HAL_ADC_RESOLUTION 10
+#define HAL_READ_ADC()  ADC
+#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
+
+#define GET_PIN_MAP_PIN(index) index
+#define GET_PIN_MAP_INDEX(pin) pin
+#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
+
+#define HAL_SENSITIVE_PINS 0, 1
+
+#ifdef __AVR_AT90USB1286__
+  #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
+#endif
+
+// AVR compatibility
+#define strtof strtod
+
+/**
+ *  set_pwm_frequency
+ *  Sets the frequency of the timer corresponding to the provided pin
+ *  as close as possible to the provided desired frequency. Internally
+ *  calculates the required waveform generation mode, prescaler and
+ *  resolution values required and sets the timer registers accordingly.
+ *  NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
+ *  NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings)
+ */
+void set_pwm_frequency(const pin_t pin, int f_desired);
+
+/**
+ * set_pwm_duty
+ *  Sets the PWM duty cycle of the provided pin to the provided value
+ *  Optionally allows inverting the duty cycle [default = false]
+ *  Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
+ */
+void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);

Marlin/src/HAL/HAL_AVR/HAL_SPI.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -197,7 +197,7 @@ void spiBegin() {
     // output pin high - like sending 0xFF
     WRITE(MOSI_PIN, HIGH);
 
-    LOOP_L_N(i, 8) {
+    for (uint8_t i = 0; i < 8; i++) {
       WRITE(SCK_PIN, HIGH);
 
       nop; // adjust so SCK is nice
@@ -224,7 +224,7 @@ void spiBegin() {
   void spiSend(uint8_t data) {
     // no interrupts during byte send - about 8µs
     cli();
-    LOOP_L_N(i, 8) {
+    for (uint8_t i = 0; i < 8; i++) {
       WRITE(SCK_PIN, LOW);
       WRITE(MOSI_PIN, data & 0x80);
       data <<= 1;

Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp

@@ -0,0 +1,792 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * MarlinSerial.cpp - Hardware serial library for Wiring
+ * Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+ *
+ * Modified 23 November 2006 by David A. Mellis
+ * Modified 28 September 2010 by Mark Sproul
+ * Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
+ * Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
+ * Modified 10 June 2018 by Eduardo José Tagle (See #10991)
+ * Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
+ */
+
+#ifdef __AVR__
+
+// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
+
+#include "../../inc/MarlinConfig.h"
+
+#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
+
+  #include "MarlinSerial.h"
+  #include "../../MarlinCore.h"
+
+  template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
+  template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };
+  template<typename Cfg> bool     MarlinSerial<Cfg>::_written = false;
+  template<typename Cfg> uint8_t  MarlinSerial<Cfg>::xon_xoff_state = MarlinSerial<Cfg>::XON_XOFF_CHAR_SENT | MarlinSerial<Cfg>::XON_CHAR;
+  template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_dropped_bytes = 0;
+  template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_buffer_overruns = 0;
+  template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_framing_errors = 0;
+  template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::rx_max_enqueued = 0;
+
+  // A SW memory barrier, to ensure GCC does not overoptimize loops
+  #define sw_barrier() asm volatile("": : :"memory");
+
+  #include "../../feature/emergency_parser.h"
+
+  // "Atomically" read the RX head index value without disabling interrupts:
+  // This MUST be called with RX interrupts enabled, and CAN'T be called
+  // from the RX ISR itself!
+  template<typename Cfg>
+  FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_head() {
+    if (Cfg::RX_SIZE > 256) {
+      // Keep reading until 2 consecutive reads return the same value,
+      // meaning there was no update in-between caused by an interrupt.
+      // This works because serial RX interrupts happen at a slower rate
+      // than successive reads of a variable, so 2 consecutive reads with
+      // the same value means no interrupt updated it.
+      ring_buffer_pos_t vold, vnew = rx_buffer.head;
+      sw_barrier();
+      do {
+        vold = vnew;
+        vnew = rx_buffer.head;
+        sw_barrier();
+      } while (vold != vnew);
+      return vnew;
+    }
+    else {
+      // With an 8bit index, reads are always atomic. No need for special handling
+      return rx_buffer.head;
+    }
+  }
+
+  template<typename Cfg>
+  volatile bool MarlinSerial<Cfg>::rx_tail_value_not_stable = false;
+  template<typename Cfg>
+  volatile uint16_t MarlinSerial<Cfg>::rx_tail_value_backup = 0;
+
+  // Set RX tail index, taking into account the RX ISR could interrupt
+  //  the write to this variable in the middle - So a backup strategy
+  //  is used to ensure reads of the correct values.
+  //    -Must NOT be called from the RX ISR -
+  template<typename Cfg>
+  FORCE_INLINE void MarlinSerial<Cfg>::atomic_set_rx_tail(typename MarlinSerial<Cfg>::ring_buffer_pos_t value) {
+    if (Cfg::RX_SIZE > 256) {
+      // Store the new value in the backup
+      rx_tail_value_backup = value;
+      sw_barrier();
+      // Flag we are about to change the true value
+      rx_tail_value_not_stable = true;
+      sw_barrier();
+      // Store the new value
+      rx_buffer.tail = value;
+      sw_barrier();
+      // Signal the new value is completely stored into the value
+      rx_tail_value_not_stable = false;
+      sw_barrier();
+    }
+    else
+      rx_buffer.tail = value;
+  }
+
+  // Get the RX tail index, taking into account the read could be
+  //  interrupting in the middle of the update of that index value
+  //    -Called from the RX ISR -
+  template<typename Cfg>
+  FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_tail() {
+    if (Cfg::RX_SIZE > 256) {
+      // If the true index is being modified, return the backup value
+      if (rx_tail_value_not_stable) return rx_tail_value_backup;
+    }
+    // The true index is stable, return it
+    return rx_buffer.tail;
+  }
+
+  // (called with RX interrupts disabled)
+  template<typename Cfg>
+  FORCE_INLINE void MarlinSerial<Cfg>::store_rxd_char() {
+
+    static EmergencyParser::State emergency_state; // = EP_RESET
+
+    // Get the tail - Nothing can alter its value while this ISR is executing, but there's
+    // a chance that this ISR interrupted the main process while it was updating the index.
+    // The backup mechanism ensures the correct value is always returned.
+    const ring_buffer_pos_t t = atomic_read_rx_tail();
+
+    // Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
+    ring_buffer_pos_t h = rx_buffer.head;
+
+    // Get the next element
+    ring_buffer_pos_t i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+    // This must read the R_UCSRA register before reading the received byte to detect error causes
+    if (Cfg::DROPPED_RX && B_DOR && !++rx_dropped_bytes) --rx_dropped_bytes;
+    if (Cfg::RX_OVERRUNS && B_DOR && !++rx_buffer_overruns) --rx_buffer_overruns;
+    if (Cfg::RX_FRAMING_ERRORS && B_FE && !++rx_framing_errors) --rx_framing_errors;
+
+    // Read the character from the USART
+    uint8_t c = R_UDR;
+
+    if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
+
+    // If the character is to be stored at the index just before the tail
+    // (such that the head would advance to the current tail), the RX FIFO is
+    // full, so don't write the character or advance the head.
+    if (i != t) {
+      rx_buffer.buffer[h] = c;
+      h = i;
+    }
+    else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
+      --rx_dropped_bytes;
+
+    if (Cfg::MAX_RX_QUEUED) {
+      // Calculate count of bytes stored into the RX buffer
+      const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+      // Keep track of the maximum count of enqueued bytes
+      NOLESS(rx_max_enqueued, rx_count);
+    }
+
+    if (Cfg::XONOFF) {
+      // If the last char that was sent was an XON
+      if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) {
+
+        // Bytes stored into the RX buffer
+        const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+        // If over 12.5% of RX buffer capacity, send XOFF before running out of
+        // RX buffer space .. 325 bytes @ 250kbits/s needed to let the host react
+        // and stop sending bytes. This translates to 13mS propagation time.
+        if (rx_count >= (Cfg::RX_SIZE) / 8) {
+
+          // At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted.
+          // Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens
+          // to be in the middle of trying to disable the RX interrupt in the main program, eventually the
+          // enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure
+          // the sending of the XOFF char is to send it HERE AND NOW.
+
+          // About to send the XOFF char
+          xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
+
+          // Wait until the TX register becomes empty and send it - Here there could be a problem
+          // - While waiting for the TX register to empty, the RX register could receive a new
+          //   character. This must also handle that situation!
+          while (!B_UDRE) {
+
+            if (B_RXC) {
+              // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
+
+              i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+              // Read the character from the USART
+              c = R_UDR;
+
+              if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
+
+              // If the character is to be stored at the index just before the tail
+              // (such that the head would advance to the current tail), the FIFO is
+              // full, so don't write the character or advance the head.
+              if (i != t) {
+                rx_buffer.buffer[h] = c;
+                h = i;
+              }
+              else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
+                --rx_dropped_bytes;
+            }
+            sw_barrier();
+          }
+
+          R_UDR = XOFF_CHAR;
+
+          // Clear the TXC bit -- "can be cleared by writing a one to its bit
+          // location". This makes sure flush() won't return until the bytes
+          // actually got written
+          B_TXC = 1;
+
+          // At this point there could be a race condition between the write() function
+          // and this sending of the XOFF char. This interrupt could happen between the
+          // wait to be empty TX buffer loop and the actual write of the character. Since
+          // the TX buffer is full because it's sending the XOFF char, the only way to be
+          // sure the write() function will succeed is to wait for the XOFF char to be
+          // completely sent. Since an extra character could be received during the wait
+          // it must also be handled!
+          while (!B_UDRE) {
+
+            if (B_RXC) {
+              // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
+
+              i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+              // Read the character from the USART
+              c = R_UDR;
+
+              if (Cfg::EMERGENCYPARSER)
+                emergency_parser.update(emergency_state, c);
+
+              // If the character is to be stored at the index just before the tail
+              // (such that the head would advance to the current tail), the FIFO is
+              // full, so don't write the character or advance the head.
+              if (i != t) {
+                rx_buffer.buffer[h] = c;
+                h = i;
+              }
+              else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
+                --rx_dropped_bytes;
+            }
+            sw_barrier();
+          }
+
+          // At this point everything is ready. The write() function won't
+          // have any issues writing to the UART TX register if it needs to!
+        }
+      }
+    }
+
+    // Store the new head value - The main loop will retry until the value is stable
+    rx_buffer.head = h;
+  }
+
+  // (called with TX irqs disabled)
+  template<typename Cfg>
+  FORCE_INLINE void MarlinSerial<Cfg>::_tx_udr_empty_irq() {
+    if (Cfg::TX_SIZE > 0) {
+      // Read positions
+      uint8_t t = tx_buffer.tail;
+      const uint8_t h = tx_buffer.head;
+
+      if (Cfg::XONOFF) {
+        // If an XON char is pending to be sent, do it now
+        if (xon_xoff_state == XON_CHAR) {
+
+          // Send the character
+          R_UDR = XON_CHAR;
+
+          // clear the TXC bit -- "can be cleared by writing a one to its bit
+          // location". This makes sure flush() won't return until the bytes
+          // actually got written
+          B_TXC = 1;
+
+          // Remember we sent it.
+          xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+
+          // If nothing else to transmit, just disable TX interrupts.
+          if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
+
+          return;
+        }
+      }
+
+      // If nothing to transmit, just disable TX interrupts. This could
+      // happen as the result of the non atomicity of the disabling of RX
+      // interrupts that could end reenabling TX interrupts as a side effect.
+      if (h == t) {
+        B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
+        return;
+      }
+
+      // There is something to TX, Send the next byte
+      const uint8_t c = tx_buffer.buffer[t];
+      t = (t + 1) & (Cfg::TX_SIZE - 1);
+      R_UDR = c;
+      tx_buffer.tail = t;
+
+      // Clear the TXC bit (by writing a one to its bit location).
+      // Ensures flush() won't return until the bytes are actually written/
+      B_TXC = 1;
+
+      // Disable interrupts if there is nothing to transmit following this byte
+      if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
+    }
+  }
+
+  // Public Methods
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::begin(const long baud) {
+    uint16_t baud_setting;
+    bool useU2X = true;
+
+    #if F_CPU == 16000000UL && SERIAL_PORT == 0
+      // Hard-coded exception for compatibility with the bootloader shipped
+      // with the Duemilanove and previous boards, and the firmware on the
+      // 8U2 on the Uno and Mega 2560.
+      if (baud == 57600) useU2X = false;
+    #endif
+
+    R_UCSRA = 0;
+    if (useU2X) {
+      B_U2X = 1;
+      baud_setting = (F_CPU / 4 / baud - 1) / 2;
+    }
+    else
+      baud_setting = (F_CPU / 8 / baud - 1) / 2;
+
+    // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
+    R_UBRRH = baud_setting >> 8;
+    R_UBRRL = baud_setting;
+
+    B_RXEN = 1;
+    B_TXEN = 1;
+    B_RXCIE = 1;
+    if (Cfg::TX_SIZE > 0) B_UDRIE = 0;
+    _written = false;
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::end() {
+    B_RXEN = 0;
+    B_TXEN = 0;
+    B_RXCIE = 0;
+    B_UDRIE = 0;
+  }
+
+  template<typename Cfg>
+  int MarlinSerial<Cfg>::peek() {
+    const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
+    return h == t ? -1 : rx_buffer.buffer[t];
+  }
+
+  template<typename Cfg>
+  int MarlinSerial<Cfg>::read() {
+    const ring_buffer_pos_t h = atomic_read_rx_head();
+
+    // Read the tail. Main thread owns it, so it is safe to directly read it
+    ring_buffer_pos_t t = rx_buffer.tail;
+
+    // If nothing to read, return now
+    if (h == t) return -1;
+
+    // Get the next char
+    const int v = rx_buffer.buffer[t];
+    t = (ring_buffer_pos_t)(t + 1) & (Cfg::RX_SIZE - 1);
+
+    // Advance tail - Making sure the RX ISR will always get an stable value, even
+    // if it interrupts the writing of the value of that variable in the middle.
+    atomic_set_rx_tail(t);
+
+    if (Cfg::XONOFF) {
+      // If the XOFF char was sent, or about to be sent...
+      if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
+        // Get count of bytes in the RX buffer
+        const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+        if (rx_count < (Cfg::RX_SIZE) / 10) {
+          if (Cfg::TX_SIZE > 0) {
+            // Signal we want an XON character to be sent.
+            xon_xoff_state = XON_CHAR;
+            // Enable TX ISR. Non atomic, but it will eventually enable them
+            B_UDRIE = 1;
+          }
+          else {
+            // If not using TX interrupts, we must send the XON char now
+            xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+            while (!B_UDRE) sw_barrier();
+            R_UDR = XON_CHAR;
+          }
+        }
+      }
+    }
+
+    return v;
+  }
+
+  template<typename Cfg>
+  typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::available() {
+    const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
+    return (ring_buffer_pos_t)(Cfg::RX_SIZE + h - t) & (Cfg::RX_SIZE - 1);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::flush() {
+
+    // Set the tail to the head:
+    //  - Read the RX head index in a safe way. (See atomic_read_rx_head.)
+    //  - Set the tail, making sure the RX ISR will always get a stable value, even
+    //    if it interrupts the writing of the value of that variable in the middle.
+    atomic_set_rx_tail(atomic_read_rx_head());
+
+    if (Cfg::XONOFF) {
+      // If the XOFF char was sent, or about to be sent...
+      if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
+        if (Cfg::TX_SIZE > 0) {
+          // Signal we want an XON character to be sent.
+          xon_xoff_state = XON_CHAR;
+          // Enable TX ISR. Non atomic, but it will eventually enable it.
+          B_UDRIE = 1;
+        }
+        else {
+          // If not using TX interrupts, we must send the XON char now
+          xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+          while (!B_UDRE) sw_barrier();
+          R_UDR = XON_CHAR;
+        }
+      }
+    }
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::write(const uint8_t c) {
+    if (Cfg::TX_SIZE == 0) {
+
+      _written = true;
+      while (!B_UDRE) sw_barrier();
+      R_UDR = c;
+
+    }
+    else {
+
+      _written = true;
+
+      // If the TX interrupts are disabled and the data register
+      // is empty, just write the byte to the data register and
+      // be done. This shortcut helps significantly improve the
+      // effective datarate at high (>500kbit/s) bitrates, where
+      // interrupt overhead becomes a slowdown.
+      // Yes, there is a race condition between the sending of the
+      // XOFF char at the RX ISR, but it is properly handled there
+      if (!B_UDRIE && B_UDRE) {
+        R_UDR = c;
+
+        // clear the TXC bit -- "can be cleared by writing a one to its bit
+        // location". This makes sure flush() won't return until the bytes
+        // actually got written
+        B_TXC = 1;
+        return;
+      }
+
+      const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
+
+      // If global interrupts are disabled (as the result of being called from an ISR)...
+      if (!ISRS_ENABLED()) {
+
+        // Make room by polling if it is possible to transmit, and do so!
+        while (i == tx_buffer.tail) {
+
+          // If we can transmit another byte, do it.
+          if (B_UDRE) _tx_udr_empty_irq();
+
+          // Make sure compiler rereads tx_buffer.tail
+          sw_barrier();
+        }
+      }
+      else {
+        // Interrupts are enabled, just wait until there is space
+        while (i == tx_buffer.tail) sw_barrier();
+      }
+
+      // Store new char. head is always safe to move
+      tx_buffer.buffer[tx_buffer.head] = c;
+      tx_buffer.head = i;
+
+      // Enable TX ISR - Non atomic, but it will eventually enable TX ISR
+      B_UDRIE = 1;
+    }
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::flushTX() {
+
+    if (Cfg::TX_SIZE == 0) {
+      // No bytes written, no need to flush. This special case is needed since there's
+      // no way to force the TXC (transmit complete) bit to 1 during initialization.
+      if (!_written) return;
+
+      // Wait until everything was transmitted
+      while (!B_TXC) sw_barrier();
+
+      // At this point nothing is queued anymore (DRIE is disabled) and
+      // the hardware finished transmission (TXC is set).
+
+    }
+    else {
+
+      // No bytes written, no need to flush. This special case is needed since there's
+      // no way to force the TXC (transmit complete) bit to 1 during initialization.
+      if (!_written) return;
+
+      // If global interrupts are disabled (as the result of being called from an ISR)...
+      if (!ISRS_ENABLED()) {
+
+        // Wait until everything was transmitted - We must do polling, as interrupts are disabled
+        while (tx_buffer.head != tx_buffer.tail || !B_TXC) {
+
+          // If there is more space, send an extra character
+          if (B_UDRE) _tx_udr_empty_irq();
+
+          sw_barrier();
+        }
+
+      }
+      else {
+        // Wait until everything was transmitted
+        while (tx_buffer.head != tx_buffer.tail || !B_TXC) sw_barrier();
+      }
+
+      // At this point nothing is queued anymore (DRIE is disabled) and
+      // the hardware finished transmission (TXC is set).
+    }
+  }
+
+  /**
+   * Imports from print.h
+   */
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(char c, int base) {
+    print((long)c, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(unsigned char b, int base) {
+    print((unsigned long)b, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(int n, int base) {
+    print((long)n, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(unsigned int n, int base) {
+    print((unsigned long)n, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(long n, int base) {
+    if (base == 0) write(n);
+    else if (base == 10) {
+      if (n < 0) { print('-'); n = -n; }
+      printNumber(n, 10);
+    }
+    else
+      printNumber(n, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(unsigned long n, int base) {
+    if (base == 0) write(n);
+    else printNumber(n, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(double n, int digits) {
+    printFloat(n, digits);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println() {
+    print('\r');
+    print('\n');
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(const String& s) {
+    print(s);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(const char c[]) {
+    print(c);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(char c, int base) {
+    print(c, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(unsigned char b, int base) {
+    print(b, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(int n, int base) {
+    print(n, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(unsigned int n, int base) {
+    print(n, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(long n, int base) {
+    print(n, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(unsigned long n, int base) {
+    print(n, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(double n, int digits) {
+    print(n, digits);
+    println();
+  }
+
+  // Private Methods
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::printNumber(unsigned long n, uint8_t base) {
+    if (n) {
+      unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
+      int8_t i = 0;
+      while (n) {
+        buf[i++] = n % base;
+        n /= base;
+      }
+      while (i--)
+        print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
+    }
+    else
+      print('0');
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
+    // Handle negative numbers
+    if (number < 0.0) {
+      print('-');
+      number = -number;
+    }
+
+    // Round correctly so that print(1.999, 2) prints as "2.00"
+    double rounding = 0.5;
+    for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
+    number += rounding;
+
+    // Extract the integer part of the number and print it
+    unsigned long int_part = (unsigned long)number;
+    double remainder = number - (double)int_part;
+    print(int_part);
+
+    // Print the decimal point, but only if there are digits beyond
+    if (digits) {
+      print('.');
+      // Extract digits from the remainder one at a time
+      while (digits--) {
+        remainder *= 10.0;
+        int toPrint = int(remainder);
+        print(toPrint);
+        remainder -= toPrint;
+      }
+    }
+  }
+
+  // Hookup ISR handlers
+  ISR(SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect)) {
+    MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::store_rxd_char();
+  }
+
+  ISR(SERIAL_REGNAME(USART,SERIAL_PORT,_UDRE_vect)) {
+    MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::_tx_udr_empty_irq();
+  }
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
+  #ifdef SERIAL_PORT_2
+
+    // Hookup ISR handlers
+    ISR(SERIAL_REGNAME(USART,SERIAL_PORT_2,_RX_vect)) {
+      MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::store_rxd_char();
+    }
+
+    ISR(SERIAL_REGNAME(USART,SERIAL_PORT_2,_UDRE_vect)) {
+      MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::_tx_udr_empty_irq();
+    }
+
+    // Preinstantiate
+    template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
+
+    // Instantiate
+    MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
+  #endif
+
+#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
+
+#ifdef INTERNAL_SERIAL_PORT
+
+  ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_RX_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::store_rxd_char();
+  }
+
+  ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_UDRE_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::_tx_udr_empty_irq();
+  }
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
+
+#endif
+
+#ifdef DGUS_SERIAL_PORT
+
+  template<typename Cfg>
+  typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
+    const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.
+                            h = tx_buffer.head;  // next pos for queue.
+    int ret = t - h - 1;
+    if (ret < 0) ret += Cfg::TX_SIZE + 1;
+    return ret;
+  }
+
+  ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_RX_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::store_rxd_char();
+  }
+
+  ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_UDRE_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::_tx_udr_empty_irq();
+  }
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
+
+#endif
+
+// For AT90USB targets use the UART for BT interfacing
+#if defined(USBCON) && ENABLED(BLUETOOTH)
+  HardwareSerial bluetoothSerial;
+#endif
+
+#endif // __AVR__

Marlin/src/HAL/HAL_AVR/MarlinSerial.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -31,9 +31,9 @@
  * Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
  */
 
-#include <WString.h>
+#include "../shared/MarlinSerial.h"
 
-#include "../../inc/MarlinConfigPre.h"
+#include <WString.h>
 
 #ifndef SERIAL_PORT
   #define SERIAL_PORT 0
@@ -48,11 +48,11 @@
 
   // These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
   // requires two levels of indirection to expand macro values properly)
-  #define SERIAL_REGNAME(registerbase,number,suffix) _SERIAL_REGNAME(registerbase,number,suffix)
+  #define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
   #if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
-    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##suffix
+    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
   #else
-    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##number##suffix
+    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
   #endif
 
   // Registers used by MarlinSerial class (expanded depending on selected serial port)
@@ -217,12 +217,10 @@
       static ring_buffer_pos_t available();
       static void write(const uint8_t c);
       static void flushTX();
-      #if HAS_DGUS_LCD
+      #ifdef DGUS_SERIAL_PORT
         static ring_buffer_pos_t get_tx_buffer_free();
       #endif
 
-      static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
-
       FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
       FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
       FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
@@ -263,12 +261,12 @@
     static constexpr int PORT               = serial;
     static constexpr unsigned int RX_SIZE   = RX_BUFFER_SIZE;
     static constexpr unsigned int TX_SIZE   = TX_BUFFER_SIZE;
-    static constexpr bool XONOFF            = ENABLED(SERIAL_XON_XOFF);
+    static constexpr bool XONOFF            = bSERIAL_XON_XOFF;
-    static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
+    static constexpr bool EMERGENCYPARSER   = bEMERGENCY_PARSER;
-    static constexpr bool DROPPED_RX        = ENABLED(SERIAL_STATS_DROPPED_RX);
+    static constexpr bool DROPPED_RX        = bSERIAL_STATS_DROPPED_RX;
-    static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    static constexpr bool RX_OVERRUNS       = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
-    static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
+    static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
-    static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
+    static constexpr bool MAX_RX_QUEUED     = bSERIAL_STATS_MAX_RX_QUEUED;
   };
   extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
 
@@ -280,53 +278,41 @@
 
 #endif // !USBCON
 
-#ifdef MMU2_SERIAL_PORT
+#ifdef INTERNAL_SERIAL_PORT
   template <uint8_t serial>
-  struct MMU2SerialCfg {
+  struct MarlinInternalSerialCfg {
     static constexpr int PORT               = serial;
+    static constexpr unsigned int RX_SIZE   = 32;
+    static constexpr unsigned int TX_SIZE   = 32;
     static constexpr bool XONOFF            = false;
     static constexpr bool EMERGENCYPARSER   = false;
     static constexpr bool DROPPED_RX        = false;
+    static constexpr bool RX_OVERRUNS       = false;
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
-    static constexpr unsigned int RX_SIZE   = 32;
-    static constexpr unsigned int TX_SIZE   = 32;
-    static constexpr bool RX_OVERRUNS       = false;
   };
 
-  extern MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>> mmuSerial;
+  extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
 #endif
 
-#ifdef LCD_SERIAL_PORT
+#ifdef DGUS_SERIAL_PORT
-
   template <uint8_t serial>
-  struct LCDSerialCfg {
+  struct MarlinInternalSerialCfg {
-    static constexpr int PORT                 = serial;
+    static constexpr int PORT               = serial;
-    static constexpr bool XONOFF              = false;
+    static constexpr unsigned int RX_SIZE   = 128;
-    static constexpr bool EMERGENCYPARSER     = ENABLED(EMERGENCY_PARSER);
+    static constexpr unsigned int TX_SIZE   = 48;
-    static constexpr bool DROPPED_RX          = false;
+    static constexpr bool XONOFF            = false;
-    static constexpr bool RX_FRAMING_ERRORS   = false;
+    static constexpr bool EMERGENCYPARSER   = false;
-    static constexpr bool MAX_RX_QUEUED       = false;
+    static constexpr bool DROPPED_RX        = false;
-    #if HAS_DGUS_LCD
+    static constexpr bool RX_OVERRUNS       = bDGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS;
-      static constexpr unsigned int RX_SIZE   = DGUS_RX_BUFFER_SIZE;
+    static constexpr bool RX_FRAMING_ERRORS = false;
-      static constexpr unsigned int TX_SIZE   = DGUS_TX_BUFFER_SIZE;
+    static constexpr bool MAX_RX_QUEUED     = false;
-      static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
-    #elif EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
-      static constexpr unsigned int RX_SIZE   = 64;
-      static constexpr unsigned int TX_SIZE   = 128;
-      static constexpr bool RX_OVERRUNS       = false;
-    #else
-      static constexpr unsigned int RX_SIZE   = 64;
-      static constexpr unsigned int TX_SIZE   = 128;
-      static constexpr bool RX_OVERRUNS       = false
-    #endif
   };
 
-  extern MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>> lcdSerial;
+  extern MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
-
 #endif
 
 // Use the UART for Bluetooth in AT90USB configurations
-#if BOTH(IS_AT90USB, BLUETOOTH)
+#if defined(USBCON) && ENABLED(BLUETOOTH)
   extern HardwareSerial bluetoothSerial;
 #endif

Marlin/src/HAL/HAL_AVR/Servo.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -48,6 +48,7 @@
  * readMicroseconds()    - Get the last-written servo pulse width in microseconds.
  * attached()            - Return true if a servo is attached.
  * detach()              - Stop an attached servo from pulsing its i/o pin.
+ *
  */
 
 #ifdef __AVR__
@@ -58,6 +59,7 @@
 
 #include <avr/interrupt.h>
 
+#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 

Marlin/src/HAL/HAL_AVR/ServoTimers.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -59,12 +59,10 @@
 // Say which 16 bit timers can be used and in what order
 #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
   //#define _useTimer1
+  #define _useTimer3
   #define _useTimer4
-  #if NUM_SERVOS > SERVOS_PER_TIMER
+  #if !HAS_MOTOR_CURRENT_PWM
-    #define _useTimer3
+    #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
-    #if !HAS_MOTOR_CURRENT_PWM && SERVOS > 2 * SERVOS_PER_TIMER
-      #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
-    #endif
   #endif
 #elif defined(__AVR_ATmega32U4__)
   #define _useTimer3

Marlin/src/HAL/HAL_AVR/endstop_interrupts.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/fast_pwm.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,14 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if NEEDS_HARDWARE_PWM // Specific meta-flag for features that mandate PWM
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_PWM
 
 #include "HAL.h"
 
@@ -167,7 +167,7 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
     uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 };
 
     // loop over prescaler values
-    LOOP_S_L_N(i, 1, 8) {
+    for (uint8_t i = 1; i < 8; i++) {
       uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
       if (timer.n == 2) {
         // No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
@@ -185,8 +185,8 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
         res_temp_phase_correct = rtf / 2;
       }
 
-      LIMIT(res_temp_fast, 1U, size);
+      LIMIT(res_temp_fast, 1u, size);
-      LIMIT(res_temp_phase_correct, 1U, size);
+      LIMIT(res_temp_phase_correct, 1u, size);
       // Calculate frequencies of test prescaler and resolution values
       const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)),
                 f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct),
@@ -274,9 +274,9 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
     else
       top = *timer.ICRn; // top = ICRn
 
-    _SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top) / float(v_size)); // Scale 8/16-bit v to top value
+    _SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top / v_size)); // Scale 8/16-bit v to top value
   }
 }
 
-#endif // NEEDS_HARDWARE_PWM
+#endif // FAST_PWM_FAN || SPINDLE_LASER_PWM
 #endif // __AVR__

Marlin/src/HAL/HAL_AVR/fastio.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -234,55 +234,5 @@ uint8_t extDigitalRead(const int8_t pin) {
   }
 }
 
-#if 0
-/**
- * Set Timer 5 PWM frequency in Hz, from 3.8Hz up to ~16MHz
- * with a minimum resolution of 100 steps.
- *
- * DC values -1.0 to 1.0. Negative duty cycle inverts the pulse.
- */
-uint16_t set_pwm_frequency_hz(const float &hz, const float dca, const float dcb, const float dcc) {
-  float count = 0;
-  if (hz > 0 && (dca || dcb || dcc)) {
-    count = float(F_CPU) / hz;            // 1x prescaler, TOP for 16MHz base freq.
-    uint16_t prescaler;                   // Range of 30.5Hz (65535) 64.5KHz (>31)
-
-         if (count >= 255. * 256.) { prescaler = 1024; SET_CS(5, PRESCALER_1024); }
-    else if (count >= 255. * 64.)  { prescaler = 256;  SET_CS(5,  PRESCALER_256); }
-    else if (count >= 255. * 8.)   { prescaler = 64;   SET_CS(5,   PRESCALER_64); }
-    else if (count >= 255.)        { prescaler = 8;    SET_CS(5,    PRESCALER_8); }
-    else                           { prescaler = 1;    SET_CS(5,    PRESCALER_1); }
-
-    count /= float(prescaler);
-    const float pwm_top = round(count);   // Get the rounded count
-
-    ICR5 = (uint16_t)pwm_top - 1;         // Subtract 1 for TOP
-    OCR5A = pwm_top * ABS(dca);          // Update and scale DCs
-    OCR5B = pwm_top * ABS(dcb);
-    OCR5C = pwm_top * ABS(dcc);
-    _SET_COM(5, A, dca ? (dca < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL); // Set compare modes
-    _SET_COM(5, B, dcb ? (dcb < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
-    _SET_COM(5, C, dcc ? (dcc < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
-
-    SET_WGM(5, FAST_PWM_ICRn);            // Fast PWM with ICR5 as TOP
-
-    //SERIAL_ECHOLNPGM("Timer 5 Settings:");
-    //SERIAL_ECHOLNPAIR("  Prescaler=", prescaler);
-    //SERIAL_ECHOLNPAIR("        TOP=", ICR5);
-    //SERIAL_ECHOLNPAIR("      OCR5A=", OCR5A);
-    //SERIAL_ECHOLNPAIR("      OCR5B=", OCR5B);
-    //SERIAL_ECHOLNPAIR("      OCR5C=", OCR5C);
-  }
-  else {
-    // Restore the default for Timer 5
-    SET_WGM(5, PWM_PC_8);                 // PWM 8-bit (Phase Correct)
-    SET_COMS(5, NORMAL, NORMAL, NORMAL);  // Do nothing
-    SET_CS(5, PRESCALER_64);              // 16MHz / 64 = 250KHz
-    OCR5A = OCR5B = OCR5C = 0;
-  }
-  return round(count);
-}
-#endif
-
 #endif // FASTIO_EXT_START
 #endif // __AVR__

Marlin/src/HAL/HAL_AVR/fastio.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -29,17 +29,11 @@
 
 #include <avr/io.h>
 
-#if defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)
+#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
-  #define AVR_AT90USB1286_FAMILY 1
+#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__))
-#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
+#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__))
-  #define AVR_ATmega1284_FAMILY 1
+#define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__))
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__))
-  #define AVR_ATmega2560_FAMILY 1
-#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
-  #define AVR_ATmega2561_FAMILY 1
-#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
-  #define AVR_ATmega328_FAMILY 1
-#endif
 
 /**
  * Include Ports and Functions
@@ -63,7 +57,7 @@
  *
  * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
  *
- * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 #define _READ(IO)             TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)
@@ -104,9 +98,9 @@
 
 #define SET_INPUT(IO)         _SET_INPUT(IO)
 #define SET_INPUT_PULLUP(IO)  do{ _SET_INPUT(IO); _WRITE(IO, HIGH); }while(0)
-#define SET_INPUT_PULLDOWN    SET_INPUT
 #define SET_OUTPUT(IO)        _SET_OUTPUT(IO)
-#define SET_PWM               SET_OUTPUT
+
+#define SET_PWM(IO)           SET_OUTPUT(IO)
 
 #define IS_INPUT(IO)          _IS_INPUT(IO)
 #define IS_OUTPUT(IO)         _IS_OUTPUT(IO)

Marlin/src/HAL/HAL_AVR/fastio/fastio_1280.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -26,7 +26,7 @@
  *
  *   Hardware Pin  : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 | 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100
  *   Port          : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
- *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
+ *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 72 75 76 77 74 xx xx xx xx xx
  */
 
 #include "../fastio.h"

Marlin/src/HAL/HAL_AVR/fastio/fastio_1281.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/fastio/fastio_168.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/fastio/fastio_644.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/fastio/fastio_AT90USB.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/inc/Conditionals_LCD.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/inc/Conditionals_adv.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/inc/Conditionals_post.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/inc/SanityCheck.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -25,6 +25,16 @@
  * Test AVR-specific configuration values for errors at compile-time.
  */
 
+/**
+ * Digipot requirement
+ */
+ #if ENABLED(DIGIPOT_MCP4018)
+  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
+    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
+      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
+  #endif
+#endif
+
 /**
  * Checks for FAST PWM
  */
@@ -36,23 +46,20 @@
  * Sanity checks for Spindle / Laser PWM
  */
 #if ENABLED(SPINDLE_LASER_PWM)
-  #include "../ServoTimers.h"   // Needed to check timer availability (_useTimer3)
   #if SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
-  #elif NUM_SERVOS > 0 && defined(_useTimer3) && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
+  #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
   #endif
-#elif defined(SPINDLE_LASER_FREQUENCY)
-  #error "SPINDLE_LASER_FREQUENCY requires SPINDLE_LASER_PWM."
 #endif
 
 /**
  * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
  */
-#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
+#if HAS_TRINAMIC && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
   #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif
 
-#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
+#if TMC_HAS_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
   #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
 #endif

Marlin/src/HAL/HAL_AVR/math.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #ifdef __AVR__
@@ -25,18 +25,9 @@
 
 #if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 
-/**
+#include "../shared/persistent_store_api.h"
- * PersistentStore for Arduino-style EEPROM interface
- * with implementations supplied by the framework.
- */
 
-#include "../shared/eeprom_api.h"
+bool PersistentStore::access_start() { return true; }
-
-#ifndef MARLIN_EEPROM_SIZE
-  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
-#endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
-bool PersistentStore::access_start()  { return true; }
 bool PersistentStore::access_finish() { return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
@@ -48,14 +39,14 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     if (v != eeprom_read_byte(p)) {
       eeprom_write_byte(p, v);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
         return true;
       }
     }
     crc16(crc, &v, 1);
     pos++;
     value++;
-  }
+  };
   return false;
 }
 
@@ -70,5 +61,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
   return false;  // always assume success for AVR's
 }
 
+size_t PersistentStore::capacity() { return E2END + 1; }
+
 #endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
 #endif // __AVR__

Marlin/src/HAL/HAL_AVR/pinsDebug.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -26,9 +26,7 @@
 
 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
 
-#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
+#define AVR_ATmega2560_FAMILY_PLUS_70 MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H)
-  #define AVR_ATmega2560_FAMILY_PLUS_70 1
-#endif
 
 #if AVR_AT90USB1286_FAMILY
 
@@ -72,12 +70,12 @@
 
 void PRINT_ARRAY_NAME(uint8_t x) {
   char *name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name);
-  LOOP_L_N(y, MAX_NAME_LENGTH) {
+  for (uint8_t y = 0; y < MAX_NAME_LENGTH; y++) {
     char temp_char = pgm_read_byte(name_mem_pointer + y);
     if (temp_char != 0)
       SERIAL_CHAR(temp_char);
     else {
-      LOOP_L_N(i, MAX_NAME_LENGTH - y) SERIAL_CHAR(' ');
+      for (uint8_t i = 0; i < MAX_NAME_LENGTH - y; i++) SERIAL_CHAR(' ');
       break;
     }
   }

Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -22,12 +22,15 @@
  * Structures for 2560 family boards that use more than 70 pins
  */
 
-#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
+#undef NUM_DIGITAL_PINS
-  #undef NUM_DIGITAL_PINS
+#if MB(BQ_ZUM_MEGA_3D)
   #define NUM_DIGITAL_PINS            85
 #elif MB(MIGHTYBOARD_REVE)
-  #undef NUM_DIGITAL_PINS
   #define NUM_DIGITAL_PINS            80
+#elif MB(MINIRAMBO)
+  #define NUM_DIGITAL_PINS            85
+#elif MB(SCOOVO_X9H)
+  #define NUM_DIGITAL_PINS            85
 #endif
 
 #define PA 1

Marlin/src/HAL/HAL_AVR/spi_pins.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,7 +57,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB
+#if HAS_GRAPHICAL_LCD
 
 #include "../shared/Marduino.h"
 #include "../shared/Delay.h"
@@ -88,7 +88,7 @@ void u8g_spiSend_sw_AVR_mode_0(uint8_t val) {
   volatile uint8_t *outData = u8g_outData,
                    *outClock = u8g_outClock;
   U8G_ATOMIC_START();
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
     if (val & 0x80)
       *outData |= bitData;
     else
@@ -108,7 +108,7 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
   volatile uint8_t *outData = u8g_outData,
                    *outClock = u8g_outClock;
   U8G_ATOMIC_START();
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
     *outClock &= bitNotClock;
     if (val & 0x80)
       *outData |= bitData;
@@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_MARLINUI_U8GLIB
+#endif // HAS_GRAPHICAL_LCD
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_AVR/watchdog.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,9 +16,10 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"
@@ -61,7 +62,7 @@ void watchdog_init() {
 #if ENABLED(WATCHDOG_RESET_MANUAL)
   ISR(WDT_vect) {
     sei();  // With the interrupt driven serial we need to allow interrupts.
-    SERIAL_ERROR_MSG(STR_WATCHDOG_FIRED);
+    SERIAL_ERROR_MSG(MSG_WATCHDOG_FIRED);
     minkill();  // interrupt-safe final kill and infinite loop
   }
 #endif

Marlin/src/HAL/HAL_AVR/watchdog.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/DebugMonitor.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,9 +16,10 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_SAM
 
 #include "../../core/macros.h"

Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp

@@ -1,30 +1,3 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef ARDUINO_ARCH_SAM
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(FLASH_EEPROM_EMULATION)
 
 /* EEPROM emulation over flash with reduced wear
  *
@@ -53,14 +26,22 @@
  * per page. We can't emulate EE endurance with FLASH for all
  * bytes, but we can emulate endurance for a given percent of
  * bytes.
+ *
  */
 
-//#define EE_EMU_DEBUG
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(EEPROM_SETTINGS) && NONE(I2C_EEPROM, SPI_EEPROM)
+
+#include "../shared/Marduino.h"
+#include "../shared/persistent_store_api.h"
 
 #define EEPROMSize     4096
 #define PagesPerGroup   128
 #define GroupCount        2
-#define PageSize        256U
+#define PageSize        256u
 
  /* Flash storage */
 typedef struct FLASH_SECTOR {
@@ -132,18 +113,15 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
                curPage = 0,         // Current FLASH page inside the group
                curGroup = 0xFF;     // Current FLASH group
 
-#define DEBUG_OUT ENABLED(EE_EMU_DEBUG)
+//#define EE_EMU_DEBUG
-#include "../../core/debug_out.h"
+#ifdef EE_EMU_DEBUG
-
+  static void ee_Dump(int page,const void* data) {
-static void ee_Dump(const int page, const void* data) {
-
-  #ifdef EE_EMU_DEBUG
 
     const uint8_t* c = (const uint8_t*) data;
     char buffer[80];
 
     sprintf_P(buffer, PSTR("Page: %d (0x%04x)\n"), page, page);
-    DEBUG_ECHO(buffer);
+    SERIAL_ECHO(buffer);
 
     char* p = &buffer[0];
     for (int i = 0; i< PageSize; ++i) {
@@ -153,16 +131,12 @@ static void ee_Dump(const int page, const void* data) {
       if ((i & 0xF) == 0xF) {
         *p++ = '\n';
         *p = 0;
-        DEBUG_ECHO(buffer);
+        SERIAL_ECHO(buffer);
         p = &buffer[0];
       }
     }
-
+  }
-  #else
+#endif
-    UNUSED(page);
-    UNUSED(data);
-  #endif
-}
 
 /* Flash Writing Protection Key */
 #define FWP_KEY    0x5Au
@@ -175,16 +149,17 @@ static void ee_Dump(const int page, const void* data) {
   #define EEFC_ERROR_FLAGS  (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE)
 #endif
 
+
 /**
  * Writes the contents of the specified page (no previous erase)
  * @param page    (page #)
  * @param data    (pointer to the data buffer)
  */
 __attribute__ ((long_call, section (".ramfunc")))
-static bool ee_PageWrite(uint16_t page, const void* data) {
+static bool ee_PageWrite(uint16_t page,const void* data) {
 
   uint16_t i;
-  uint32_t addrflash = uint32_t(getFlashStorage(page));
+  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
 
   // Read the flash contents
   uint32_t pageContents[PageSize>>2];
@@ -199,11 +174,13 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
   for (i = 0; i <PageSize >> 2; i++)
     pageContents[i] = (((uint32_t*)data)[i]) | (~(pageContents[i] ^ ((uint32_t*)data)[i]));
 
-  DEBUG_ECHO_START();
+  #ifdef EE_EMU_DEBUG
-  DEBUG_ECHOLNPAIR("EEPROM PageWrite   ", page);
+    SERIAL_ECHO_START();
-  DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+    SERIAL_ECHOLNPAIR("EEPROM PageWrite   ", page);
-  DEBUG_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
-  DEBUG_FLUSH();
+    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_FLUSH();
+  #endif
 
   // Get the page relative to the start of the EFC controller, and the EFC controller to use
   Efc *efc;
@@ -245,8 +222,10 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
+    #ifdef EE_EMU_DEBUG
-    DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
+    #endif
     return false;
   }
 
@@ -270,9 +249,10 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
+    #ifdef EE_EMU_DEBUG
-    DEBUG_ECHOLNPAIR("EEPROM Write failure for page ", page);
+      SERIAL_ECHO_START();
-
+      SERIAL_ECHOLNPAIR("EEPROM Write failure for page ", page);
+    #endif
     return false;
   }
 
@@ -286,11 +266,11 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
   if (memcmp(getFlashStorage(page),data,PageSize)) {
 
     #ifdef EE_EMU_DEBUG
-      DEBUG_ECHO_START();
+      SERIAL_ECHO_START();
-      DEBUG_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
+      SERIAL_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
 
-      ee_Dump( page, (uint32_t *)addrflash);
+      ee_Dump( page,(uint32_t *) addrflash);
-      ee_Dump(-page, data);
+      ee_Dump(-page,data);
 
       // Calculate count of changed bits
       uint32_t* p1 = (uint32_t*)addrflash;
@@ -306,7 +286,7 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
           }
         }
       }
-      DEBUG_ECHOLNPAIR("--> Differing bits: ", count);
+      SERIAL_ECHOLNPAIR("--> Differing bits: ", count);
     #endif
 
     return false;
@@ -323,13 +303,15 @@ __attribute__ ((long_call, section (".ramfunc")))
 static bool ee_PageErase(uint16_t page) {
 
   uint16_t i;
-  uint32_t addrflash = uint32_t(getFlashStorage(page));
+  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
 
-  DEBUG_ECHO_START();
+  #ifdef EE_EMU_DEBUG
-  DEBUG_ECHOLNPAIR("EEPROM PageErase  ", page);
+    SERIAL_ECHO_START();
-  DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+    SERIAL_ECHOLNPAIR("EEPROM PageErase  ", page);
-  DEBUG_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
-  DEBUG_FLUSH();
+    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_FLUSH();
+  #endif
 
   // Get the page relative to the start of the EFC controller, and the EFC controller to use
   Efc *efc;
@@ -370,9 +352,10 @@ static bool ee_PageErase(uint16_t page) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
+    #ifdef EE_EMU_DEBUG
-    DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
+      SERIAL_ECHO_START();
-
+      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
+    #endif
     return false;
   }
 
@@ -394,9 +377,10 @@ static bool ee_PageErase(uint16_t page) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
+    #ifdef EE_EMU_DEBUG
-    DEBUG_ECHOLNPAIR("EEPROM Erase failure for page ",page);
+      SERIAL_ECHO_START();
-
+      SERIAL_ECHOLNPAIR("EEPROM Erase failure for page ",page);
+    #endif
     return false;
   }
 
@@ -410,17 +394,20 @@ static bool ee_PageErase(uint16_t page) {
   uint32_t * aligned_src = (uint32_t *) addrflash;
   for (i = 0; i < PageSize >> 2; i++) {
     if (*aligned_src++ != 0xFFFFFFFF) {
-      DEBUG_ECHO_START();
+
-      DEBUG_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
+      #ifdef EE_EMU_DEBUG
-      ee_Dump(page, (uint32_t *)addrflash);
+        SERIAL_ECHO_START();
+        SERIAL_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
+
+        ee_Dump( page,(uint32_t *) addrflash);
+      #endif
       return false;
     }
   }
 
   return true;
 }
-
+static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer = false) {
-static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
 
   uint32_t baddr;
   uint32_t blen;
@@ -503,7 +490,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
   return 0xFF;
 }
 
-static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
+static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer = false) {
   uint32_t baddr,
            blen,
            nextAddr = 0xFFFF,
@@ -595,7 +582,7 @@ static bool ee_IsPageClean(int page) {
   return true;
 }
 
-static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData=0xFF) {
+static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData = 0xFF) {
 
   // Check if RAM buffer has something to be written
   bool isEmpty = true;
@@ -921,9 +908,11 @@ static void ee_Init() {
   // If all groups seem to be used, default to first group
   if (curGroup >= GroupCount) curGroup = 0;
 
-  DEBUG_ECHO_START();
+  #ifdef EE_EMU_DEBUG
-  DEBUG_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
+    SERIAL_ECHO_START();
-  DEBUG_FLUSH();
+    SERIAL_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
+    SERIAL_FLUSH();
+  #endif
 
   // Now, validate that all the other group pages are empty
   for (int grp = 0; grp < GroupCount; grp++) {
@@ -931,9 +920,11 @@ static void ee_Init() {
 
     for (int page = 0; page < PagesPerGroup; page++) {
       if (!ee_IsPageClean(grp * PagesPerGroup + page)) {
-        DEBUG_ECHO_START();
+        #ifdef EE_EMU_DEBUG
-        DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
+          SERIAL_ECHO_START();
-        DEBUG_FLUSH();
+          SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
+          SERIAL_FLUSH();
+        #endif
         ee_PageErase(grp * PagesPerGroup + page);
       }
     }
@@ -943,69 +934,66 @@ static void ee_Init() {
   // and also validate that all the other ones are clean
   for (curPage = 0; curPage < PagesPerGroup; curPage++) {
     if (ee_IsPageClean(curGroup * PagesPerGroup + curPage)) {
-      ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
+      #ifdef EE_EMU_DEBUG
+        ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
+      #endif
       break;
     }
   }
 
-  DEBUG_ECHO_START();
+  #ifdef EE_EMU_DEBUG
-  DEBUG_ECHOLNPAIR("EEPROM Active page: ", curPage);
+    SERIAL_ECHO_START();
-  DEBUG_FLUSH();
+    SERIAL_ECHOLNPAIR("EEPROM Active page: ", curPage);
+    SERIAL_FLUSH();
+  #endif
 
   // Make sure the pages following the first clean one are also clean
   for (int page = curPage + 1; page < PagesPerGroup; page++) {
     if (!ee_IsPageClean(curGroup * PagesPerGroup + page)) {
-      DEBUG_ECHO_START();
+      #ifdef EE_EMU_DEBUG
-      DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
+        SERIAL_ECHO_START();
-      DEBUG_FLUSH();
+        SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
-      ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
+        SERIAL_FLUSH();
+        ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
+      #endif
       ee_PageErase(curGroup * PagesPerGroup + page);
     }
   }
 }
 
-/* PersistentStore -----------------------------------------------------------*/
+uint8_t eeprom_read_byte(uint8_t* addr) {
+  ee_Init();
+  return ee_Read((uint32_t)addr);
+}
 
-#include "../shared/eeprom_api.h"
+void eeprom_write_byte(uint8_t* addr, uint8_t value) {
+  ee_Init();
+  ee_Write((uint32_t)addr, value);
+}
 
-#ifndef MARLIN_EEPROM_SIZE
+void eeprom_update_block(const void* __src, void* __dst, size_t __n) {
-  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
+  uint8_t* dst = (uint8_t*)__dst;
-#endif
+  const uint8_t* src = (const uint8_t*)__src;
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+  while (__n--) {
-bool PersistentStore::access_start()  { ee_Init();  return true; }
+    eeprom_write_byte(dst, *src);
-bool PersistentStore::access_finish() { ee_Flush(); return true; }
+    ++dst;
-
+    ++src;
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
-    uint8_t v = *value;
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != ee_Read(uint32_t(p))) {
-      ee_Write(uint32_t(p), v);
-      delay(2);
-      if (ee_Read(uint32_t(p)) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
-        return true;
-      }
-    }
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
   }
-  return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+void eeprom_read_block(void* __dst, const void* __src, size_t __n) {
-  do {
+  uint8_t* dst = (uint8_t*)__dst;
-    uint8_t c = ee_Read(uint32_t(pos));
+  uint8_t* src = (uint8_t*)__src;
-    if (writing) *value = c;
+  while (__n--) {
-    crc16(crc, &c, 1);
+    *dst = eeprom_read_byte(src);
-    pos++;
+    ++dst;
-    value++;
+    ++src;
-  } while (--size);
+  }
-  return false;
 }
 
-#endif // FLASH_EEPROM_EMULATION
+void eeprom_flush() {
-#endif // ARDUINO_ARCH_SAM
+  ee_Flush();
+}
+
+#endif // EEPROM_SETTINGS && (!I2C_EEPROM && !SPI_EEPROM)
+#endif // ARDUINO_ARCH_AVR

Marlin/src/HAL/HAL_DUE/HAL.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  *
  * This program is free software: you can redistribute it and/or modify
@@ -14,12 +14,13 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
  */
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #ifdef ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/HAL.h

@@ -1,7 +1,7 @@
 /**
  * Marlin 3D Printer Firmware
  *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
  *
@@ -16,59 +16,85 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #define CPU_32_BIT
 
 #include "../shared/Marduino.h"
-#include "../shared/eeprom_if.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
 #include "watchdog.h"
+#include "timers.h"
 
 #include <stdint.h>
 
-#define _MSERIAL(X) Serial##X
-#define MSERIAL(X) _MSERIAL(X)
-#define Serial0 Serial
-
 // Define MYSERIAL0/1 before MarlinSerial includes!
-#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
+#if SERIAL_PORT == -1
   #define MYSERIAL0 customizedSerial1
-#elif WITHIN(SERIAL_PORT, 0, 3)
+#elif SERIAL_PORT == 0
-  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
+  #define MYSERIAL0 Serial
+#elif SERIAL_PORT == 1
+  #define MYSERIAL0 Serial1
+#elif SERIAL_PORT == 2
+  #define MYSERIAL0 Serial2
+#elif SERIAL_PORT == 3
+  #define MYSERIAL0 Serial3
 #else
   #error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
+  #if SERIAL_PORT_2 == SERIAL_PORT
+    #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
+  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 customizedSerial2
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
+  #elif SERIAL_PORT_2 == 0
-    #define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
+    #define MYSERIAL1 Serial
+  #elif SERIAL_PORT_2 == 1
+    #define MYSERIAL1 Serial1
+  #elif SERIAL_PORT_2 == 2
+    #define MYSERIAL1 Serial2
+  #elif SERIAL_PORT_2 == 3
+    #define MYSERIAL1 Serial3
   #else
     #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
   #endif
+  #define NUM_SERIAL 2
+#else
+  #define NUM_SERIAL 1
 #endif
 
-#ifdef LCD_SERIAL_PORT
+#ifdef DGUS_SERIAL_PORT
-  #if LCD_SERIAL_PORT == -1
+  #if DGUS_SERIAL_PORT == SERIAL_PORT
-    #define LCD_SERIAL lcdSerial
+    #error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration."
-  #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
+  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
+    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+  #elif DGUS_SERIAL_PORT == -1
+    #define DGUS_SERIAL internalDgusSerial
+  #elif DGUS_SERIAL_PORT == 0
+    #define DGUS_SERIAL Serial
+  #elif DGUS_SERIAL_PORT == 1
+    #define DGUS_SERIAL Serial1
+  #elif DGUS_SERIAL_PORT == 2
+    #define DGUS_SERIAL Serial2
+  #elif DGUS_SERIAL_PORT == 3
+    #define DGUS_SERIAL Serial3
   #else
-    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
   #endif
 #endif
 
+
 #include "MarlinSerial.h"
 #include "MarlinSerialUSB.h"
 
@@ -93,8 +119,8 @@ typedef int8_t pin_t;
 //
 // Interrupts
 //
-#define CRITICAL_SECTION_START()  uint32_t primask = __get_PRIMASK(); __disable_irq()
+#define CRITICAL_SECTION_START  uint32_t primask = __get_PRIMASK(); __disable_irq()
-#define CRITICAL_SECTION_END()    if (!primask) __enable_irq()
+#define CRITICAL_SECTION_END    if (!primask) __enable_irq()
 #define ISRS_ENABLED() (!__get_PRIMASK())
 #define ENABLE_ISRS()  __enable_irq()
 #define DISABLE_ISRS() __disable_irq()
@@ -105,7 +131,13 @@ void sei();                     // Enable interrupts
 void HAL_clear_reset_source();  // clear reset reason
 uint8_t HAL_get_reset_source(); // get reset reason
 
-inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+//
+// EEPROM
+//
+void eeprom_write_byte(uint8_t *pos, unsigned char value);
+uint8_t eeprom_read_byte(uint8_t *pos);
+void eeprom_read_block (void *__dst, const void *__src, size_t __n);
+void eeprom_update_block (const void *__src, void *__dst, size_t __n);
 
 //
 // ADC
@@ -113,16 +145,15 @@ inline void HAL_reboot() {}  // reboot the board or restart the bootloader
 extern uint16_t HAL_adc_result;     // result of last ADC conversion
 
 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
 #endif
 
 #define HAL_ANALOG_SELECT(ch)
 
 inline void HAL_adc_init() {}//todo
 
-#define HAL_ADC_VREF         3.3
-#define HAL_ADC_RESOLUTION  10
 #define HAL_START_ADC(ch)   HAL_adc_start_conversion(ch)
+#define HAL_ADC_RESOLUTION  10
 #define HAL_READ_ADC()      HAL_adc_result
 #define HAL_ADC_READY()     true
 

Marlin/src/HAL/HAL_DUE/HAL_SPI.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -30,7 +30,7 @@
  */
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
  *
  * For ARDUINO_ARCH_SAM
  */
@@ -595,7 +595,7 @@
       SPI_Enable(SPI0);
 
       SET_OUTPUT(DAC0_SYNC);
-      #if HAS_MULTI_EXTRUDER
+      #if EXTRUDERS > 1
         SET_OUTPUT(DAC1_SYNC);
         WRITE(DAC1_SYNC, HIGH);
       #endif
@@ -759,6 +759,7 @@
      *
      *  All of the above can be avoided by defining FORCE_SOFT_SPI to force the
      *  display to use software SPI.
+     *
      */
 
     void spiInit(uint8_t spiRate=6) {  // Default to slowest rate if not specified)

Marlin/src/HAL/HAL_DUE/InterruptVectors.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -63,13 +63,13 @@ static pfnISR_Handler* get_relocated_table_addr() {
   memcpy(&ram_tab, romtab, sizeof(ram_tab));
 
   // Disable global interrupts
-  CRITICAL_SECTION_START();
+  CRITICAL_SECTION_START;
 
   // Set the vector table base address to the SRAM copy
   SCB->VTOR = (uint32_t)(&ram_tab);
 
   // Reenable interrupts
-  CRITICAL_SECTION_END();
+  CRITICAL_SECTION_END;
 
   // Return the address of the table
   return (pfnISR_Handler*)(&ram_tab);
@@ -80,7 +80,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
   pfnISR_Handler *isrtab = get_relocated_table_addr();
 
   // Disable global interrupts
-  CRITICAL_SECTION_START();
+  CRITICAL_SECTION_START;
 
   // Get the original handler
   pfnISR_Handler oldHandler = isrtab[irq + 16];
@@ -89,7 +89,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
   isrtab[irq + 16] = newHandler;
 
   // Reenable interrupts
-  CRITICAL_SECTION_END();
+  CRITICAL_SECTION_END;
 
   // Return the original one
   return oldHandler;

Marlin/src/HAL/HAL_DUE/InterruptVectors.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/MarlinSerial.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -45,7 +45,7 @@ template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSeria
 // A SW memory barrier, to ensure GCC does not overoptimize loops
 #define sw_barrier() asm volatile("": : :"memory");
 
-#include "../../feature/e_parser.h"
+#include "../../feature/emergency_parser.h"
 
 // (called with RX interrupts disabled)
 template<typename Cfg>
@@ -606,7 +606,7 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
 
   // Round correctly so that print(1.999, 2) prints as "2.00"
   double rounding = 0.5;
-  LOOP_L_N(i, digits) rounding *= 0.1;
+  for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
   number += rounding;
 
   // Extract the integer part of the number and print it
@@ -629,13 +629,23 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
 
 // If not using the USB port as serial port
 #if SERIAL_PORT >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;      // Define
+
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;   // Instantiate
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
 #endif
 
-#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
+#ifdef SERIAL_PORT_2
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;    // Define
+
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
 #endif
 
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/MarlinSerial.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -27,9 +27,9 @@
  * Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti.  All right reserved.
  */
 
-#include <WString.h>
+#include "../shared/MarlinSerial.h"
 
-#include "../../inc/MarlinConfigPre.h"
+#include <WString.h>
 
 #define DEC 10
 #define HEX 16
@@ -122,8 +122,6 @@ public:
   static void write(const uint8_t c);
   static void flushTX();
 
-  static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
-
   FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
   FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
   FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
@@ -165,18 +163,22 @@ struct MarlinSerialCfg {
   static constexpr int PORT               = serial;
   static constexpr unsigned int RX_SIZE   = RX_BUFFER_SIZE;
   static constexpr unsigned int TX_SIZE   = TX_BUFFER_SIZE;
-  static constexpr bool XONOFF            = ENABLED(SERIAL_XON_XOFF);
+  static constexpr bool XONOFF            = bSERIAL_XON_XOFF;
-  static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
+  static constexpr bool EMERGENCYPARSER   = bEMERGENCY_PARSER;
-  static constexpr bool DROPPED_RX        = ENABLED(SERIAL_STATS_DROPPED_RX);
+  static constexpr bool DROPPED_RX        = bSERIAL_STATS_DROPPED_RX;
-  static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
+  static constexpr bool RX_OVERRUNS       = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
-  static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
+  static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
-  static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
+  static constexpr bool MAX_RX_QUEUED     = bSERIAL_STATS_MAX_RX_QUEUED;
 };
 
 #if SERIAL_PORT >= 0
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
-#endif
 
-#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
+  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
+#endif // SERIAL_PORT >= 0
+
+#ifdef SERIAL_PORT_2
+
   extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
 #endif

Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -29,12 +29,12 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if HAS_USB_SERIAL
+#if SERIAL_PORT == -1
 
 #include "MarlinSerialUSB.h"
 
 #if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/e_parser.h"
+  #include "../../feature/emergency_parser.h"
 #endif
 
 // Imports from Atmel USB Stack/CDC implementation
@@ -73,7 +73,9 @@ int MarlinSerialUSB::peek() {
 
   pending_char = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)pending_char));
+  #if ENABLED(EMERGENCY_PARSER)
+    emergency_parser.update(emergency_state, (char)pending_char);
+  #endif
 
   return pending_char;
 }
@@ -95,7 +97,9 @@ int MarlinSerialUSB::read() {
 
   int c = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)c));
+  #if ENABLED(EMERGENCY_PARSER)
+    emergency_parser.update(emergency_state, (char)c);
+  #endif
 
   return c;
 }
@@ -255,7 +259,7 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
 
   // Round correctly so that print(1.999, 2) prints as "2.00"
   double rounding = 0.5;
-  LOOP_L_N(i, digits)
+  for (uint8_t i = 0; i < digits; ++i)
     rounding *= 0.1;
 
   number += rounding;
@@ -279,12 +283,8 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
 }
 
 // Preinstantiate
-#if SERIAL_PORT == -1
+MarlinSerialUSB customizedSerial1;
-  MarlinSerialUSB customizedSerial1;
+
-#endif
+#endif // SERIAL_PORT == -1
-#if SERIAL_PORT_2 == -1
-  MarlinSerialUSB customizedSerial2;
-#endif
 
-#endif // HAS_USB_SERIAL
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,7 +28,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if HAS_USB_SERIAL
+#if SERIAL_PORT == -1
 
 #include <WString.h>
 
@@ -88,12 +88,6 @@ private:
   static void printFloat(double, uint8_t);
 };
 
-#if SERIAL_PORT == -1
+extern MarlinSerialUSB customizedSerial1;
-  extern MarlinSerialUSB customizedSerial1;
-#endif
 
-#if SERIAL_PORT_2 == -1
+#endif // SERIAL_PORT == -1
-  extern MarlinSerialUSB customizedSerial2;
-#endif
-
-#endif // HAS_USB_SERIAL

Marlin/src/HAL/HAL_DUE/Servo.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -44,6 +44,7 @@
 
 #if HAS_SERVOS
 
+#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 

Marlin/src/HAL/HAL_DUE/Tone.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -18,19 +18,20 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
 /**
  * Description: Tone function for Arduino Due and compatible (SAM3X8E)
- * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
+ * Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
  */
 
 #ifdef ARDUINO_ARCH_SAM
 
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
+#include "timers.h"
 
 static pin_t tone_pin;
 volatile static int32_t toggles;

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -52,13 +52,14 @@
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
  */
 
 #ifdef __SAM3X8E__
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB
+#if HAS_GRAPHICAL_LCD
 
 #include <U8glib.h>
 
@@ -144,6 +145,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
   return 1;
 }
 
-#endif // HAS_MARLINUI_U8GLIB
+#endif // HAS_GRAPHICAL_LCD
 
-#endif // __SAM3X8E__
+#endif //__SAM3X8E__

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,7 +57,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
+#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
 
 #undef SPI_SPEED
 #define SPI_SPEED 2  // About 2 MHz
@@ -144,5 +144,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
+#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,7 +57,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB
+#if HAS_GRAPHICAL_LCD
 
 #include "../../shared/Delay.h"
 
@@ -80,7 +80,7 @@ Pio *SCK_pPio, *MOSI_pPio;
 uint32_t SCK_dwMask, MOSI_dwMask;
 
 void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
     if (val & 0x80)
       MOSI_pPio->PIO_SODR = MOSI_dwMask;
     else
@@ -94,7 +94,7 @@ void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
 }
 
 void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
     SCK_pPio->PIO_CODR = SCK_dwMask;
     DELAY_NS(50);
     if (val & 0x80)
@@ -108,5 +108,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
   }
 }
 
-#endif // HAS_MARLINUI_U8GLIB
+#endif // HAS_GRAPHICAL_LCD
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/endstop_interrupts.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -47,21 +47,43 @@ void endstop_ISR() { endstops.update(); }
 
 void setup_endstop_interrupts() {
   #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
+  #if HAS_X_MAX
-  TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
+    _ATTACH(X_MAX_PIN);
-  TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
+  #endif
-  TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
+  #if HAS_X_MIN
-  TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
+    _ATTACH(X_MIN_PIN);
-  TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
+  #endif
-  TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
+  #if HAS_Y_MAX
-  TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
+    _ATTACH(Y_MAX_PIN);
-  TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
+  #endif
-  TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
+  #if HAS_Y_MIN
-  TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
+    _ATTACH(Y_MIN_PIN);
-  TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
+  #endif
-  TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
+  #if HAS_Z_MAX
-  TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
+    _ATTACH(Z_MAX_PIN);
-  TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
+  #endif
-  TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
+  #if HAS_Z_MIN
-  TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+     _ATTACH(Z_MIN_PIN);
+  #endif
+  #if HAS_Z2_MAX
+    _ATTACH(Z2_MAX_PIN);
+  #endif
+  #if HAS_Z2_MIN
+    _ATTACH(Z2_MIN_PIN);
+  #endif
+  #if HAS_Z3_MAX
+    _ATTACH(Z3_MAX_PIN);
+  #endif
+  #if HAS_Z3_MIN
+    _ATTACH(Z3_MIN_PIN);
+  #endif
+  #if HAS_Z4_MAX
+    _ATTACH(Z4_MAX_PIN);
+  #endif
+  #if HAS_Z4_MIN
+    _ATTACH(Z4_MIN_PIN);
+  #endif
+  #if HAS_Z_MIN_PROBE_PIN
+    _ATTACH(Z_MIN_PROBE_PIN);
+  #endif
 }

Marlin/src/HAL/HAL_DUE/fastio.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -58,7 +58,7 @@
  *
  * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
  *
- * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 // Read a pin
@@ -166,7 +166,7 @@
 // Set pin as output (wrapper) -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)       _SET_OUTPUT(IO)
 // Set pin as PWM
-#define SET_PWM               SET_OUTPUT
+#define SET_PWM(IO)           SET_OUTPUT(IO)
 
 // Check if pin is an input
 #define IS_INPUT(IO)         ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) == 0)
@@ -174,7 +174,7 @@
 #define IS_OUTPUT(IO)        ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) != 0)
 
 // Shorthand
-#define OUT_WRITE(IO,V)      do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
+#define OUT_WRITE(IO,V)       { SET_OUTPUT(IO); WRITE(IO,V); }
 
 // digitalRead/Write wrappers
 #define extDigitalRead(IO)    digitalRead(IO)

Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.cpp

@@ -0,0 +1,145 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * The PWM module is only used to generate interrupts at specified times. It
+ * is NOT used to directly toggle pins. The ISR writes to the pin assigned to
+ * that interrupt.
+ *
+ * All PWMs use the same repetition rate.  The G2 needs about 10KHz min in order to
+ * not have obvious ripple on the Vref signals.
+ *
+ * The data structures are setup to minimize the computation done by the ISR which
+ * minimizes ISR execution time.  Execution times are 0.8 to 1.1 microseconds.
+ *
+ * FIve PWM interrupt sources are used.  Channel 0 sets the base period.  All Vref
+ * signals are set active when this counter overflows and resets to zero.  The compare
+ * values in channels 1-4 are set to give the desired duty cycle for that Vref pin.
+ * When counter 0 matches the compare value then that channel generates an interrupt.
+ * The ISR checks the source of the interrupt and sets the corresponding pin inactive.
+ *
+ * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
+ */
+
+#include "../../../inc/MarlinConfig.h"
+
+#if MB(PRINTRBOARD_G2)
+
+#include "G2_PWM.h"
+
+volatile uint32_t *SODR_A = &PIOA->PIO_SODR,
+                  *SODR_B = &PIOB->PIO_SODR,
+                  *CODR_A = &PIOA->PIO_CODR,
+                  *CODR_B = &PIOB->PIO_CODR;
+
+PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
+
+void Stepper::digipot_init() {
+
+  OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
+  OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
+
+  #define WPKEY          (0x50574D << 8) // “PWM” in ASCII
+  #define WPCMD_DIS_SW   0  // command to disable Write Protect SW
+  #define WPRG_ALL       (PWM_WPCR_WPRG0 | PWM_WPCR_WPRG1 | PWM_WPCR_WPRG2 | PWM_WPCR_WPRG3 | PWM_WPCR_WPRG4 | PWM_WPCR_WPRG5)  // all Write Protect Groups
+
+  #define PWM_CLOCK_F    F_CPU / 1000000UL   // set clock to 1MHz
+
+  PMC->PMC_PCER1 = PMC_PCER1_PID36;                       // enable PWM controller clock (disabled on power up)
+
+  PWM->PWM_WPCR = WPKEY | WPRG_ALL | WPCMD_DIS_SW;        // enable setting of all PWM registers
+  PWM->PWM_CLK = PWM_CLOCK_F;                             // enable CLK_A and set it to 1MHz, leave CLK_B disabled
+  PWM->PWM_CH_NUM[0].PWM_CMR = 0b1011;                    // set channel 0 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;                    // set channel 1 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;                    // set channel 2 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;                    // set channel 3 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;                    // set channel 4 to Clock A input & to left aligned
+
+  PWM->PWM_CH_NUM[0].PWM_CPRD = PWM_PERIOD_US;            // set channel 0 Period
+
+  PWM->PWM_IER2 = PWM_IER1_CHID0;                         // generate interrupt when counter0 overflows
+  PWM->PWM_IER2 = PWM_IER2_CMPM0 | PWM_IER2_CMPM1 | PWM_IER2_CMPM2 | PWM_IER2_CMPM3 | PWM_IER2_CMPM4;        // generate interrupt on compare event
+
+  PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
+  PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
+  PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1]));   // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
+  PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2]));   // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
+
+  PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
+
+  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0 | PWM_SCM_SYNC1 | PWM_SCM_SYNC2 | PWM_SCM_SYNC3 | PWM_SCM_SYNC4; // sync 1-4 with 0, use mode 0 for updates
+
+  PWM->PWM_ENA = PWM_ENA_CHID0 | PWM_ENA_CHID1 | PWM_ENA_CHID2 | PWM_ENA_CHID3 | PWM_ENA_CHID4;         // enable the channels used by G2
+  PWM->PWM_IER1 = PWM_IER1_CHID0 | PWM_IER1_CHID1 | PWM_IER1_CHID2 | PWM_IER1_CHID3 | PWM_IER1_CHID4;        // enable interrupts for the channels used by G2
+
+  NVIC_EnableIRQ(PWM_IRQn);     // Enable interrupt handler
+  NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
+}
+
+void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
+
+  if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
+
+  switch (driver) {
+    case 0: PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
+            PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
+            PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    case 1: PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
+            PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    default:PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
+            PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+  }
+}
+
+volatile uint32_t PWM_ISR1_STATUS, PWM_ISR2_STATUS;
+
+void PWM_Handler() {
+  PWM_ISR1_STATUS = PWM->PWM_ISR1;
+  PWM_ISR2_STATUS = PWM->PWM_ISR2;
+  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                           // CHAN_0 interrupt
+    *ISR_table[0].set_register = ISR_table[0].write_mask;                                          // set X to active
+    *ISR_table[1].set_register = ISR_table[1].write_mask;                                          // set Y to active
+    *ISR_table[2].set_register = ISR_table[2].write_mask;                                          // set Z to active
+    *ISR_table[3].set_register = ISR_table[3].write_mask;                                          // set E to active
+  }
+  else {
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM1)  *ISR_table[0].clr_register = ISR_table[0].write_mask;   // set X to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM2)  *ISR_table[1].clr_register = ISR_table[1].write_mask;   // set Y to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM3)  *ISR_table[2].clr_register = ISR_table[2].write_mask;   // set Z to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM4)  *ISR_table[3].clr_register = ISR_table[3].write_mask;   // set E to inactive
+  }
+  return;
+}
+
+#endif // PRINTRBOARD_G2

Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -63,7 +63,7 @@ extern PWM_map ISR_table[NUM_PWMS];
 extern uint32_t motor_current_setting[3];
 
 #define IR_BIT(p) (WITHIN(p, 0, 3) ? (p) : (p) + 4)
-#define COPY_ACTIVE_TABLE() do{ LOOP_L_N(i, 6) work_table[i] = active_table[i]; }while(0)
+#define COPY_ACTIVE_TABLE() do{ for (uint8_t i = 0; i < 6 ; i++) work_table[i] = active_table[i]; }while(0)
 
 #define PWM_MR0 19999         // base repetition rate minus one count - 20mS
 #define PWM_PR 24             // prescaler value - prescaler divide by 24 + 1  -  1 MHz output

Marlin/src/HAL/HAL_DUE/fastio/G2_pins.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_DUE/inc/Conditionals_adv.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/inc/Conditionals_post.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/inc/SanityCheck.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -52,10 +52,10 @@
   #endif
 #endif
 
-#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+#if ENABLED(FAST_PWM_FAN)
-  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on DUE."
+  #error "FAST_PWM_FAN is not yet implemented for this platform."
 #endif
 
-#if HAS_TMC_SW_SERIAL
+#if TMC_HAS_SW_SERIAL
   #error "TMC220x Software Serial is not supported on this platform."
 #endif

Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp

@@ -1,7 +1,7 @@
 /**
  * Marlin 3D Printer Firmware
  *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
  * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
@@ -17,29 +17,32 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #ifdef ARDUINO_ARCH_SAM
 
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(EEPROM_SETTINGS)
+
 #include "../../inc/MarlinConfig.h"
+#include "../shared/persistent_store_api.h"
 
-#if USE_WIRED_EEPROM
+#if !defined(E2END) && NONE(I2C_EEPROM, SPI_EEPROM)
-
+  #define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with simple implementations supplied by Marlin.
- */
-
-#include "../shared/eeprom_if.h"
-#include "../shared/eeprom_api.h"
-
-#ifndef MARLIN_EEPROM_SIZE
-  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+
-bool PersistentStore::access_start()  { eeprom_init(); return true; }
+extern void eeprom_flush();
-bool PersistentStore::access_finish() { return true; }
+
+bool PersistentStore::access_start() { return true; }
+
+bool PersistentStore::access_finish() {
+  #if NONE(I2C_EEPROM, SPI_EEPROM)
+    eeprom_flush();
+  #endif
+  return true;
+}
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   while (size--) {
@@ -51,14 +54,14 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
       eeprom_write_byte(p, v);
       delay(2);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
         return true;
       }
     }
     crc16(crc, &v, 1);
     pos++;
     value++;
-  }
+  };
   return false;
 }
 
@@ -73,5 +76,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
   return false;
 }
 
-#endif // USE_WIRED_EEPROM
+size_t PersistentStore::capacity() { return E2END + 1; }
+
+#endif // EEPROM_SETTINGS
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/pinsDebug.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -179,4 +179,5 @@ void pwm_details(int32_t pin) {
  * ----------------+--------
  *  ID             |  PB11
  *  VBOF           |  PB10
+ *
  */

Marlin/src/HAL/HAL_DUE/spi_pins.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/timers.cpp

@@ -1,7 +1,7 @@
 /**
  * Marlin 3D Printer Firmware
  *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
  *
@@ -16,12 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
 /**
- * HAL Timers for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #ifdef ARDUINO_ARCH_SAM
@@ -32,6 +34,8 @@
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
 
+#include "timers.h"
+
 // ------------------------
 // Local defines
 // ------------------------

Marlin/src/HAL/HAL_DUE/timers.h

@@ -1,7 +1,7 @@
 /**
  * Marlin 3D Printer Firmware
  *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  *
  * This program is free software: you can redistribute it and/or modify
@@ -15,13 +15,15 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 /**
- * HAL Timers for Arduino Due and compatible (SAM3X8E)
+ * HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #include <stdint.h>
@@ -38,17 +40,11 @@ typedef uint32_t hal_timer_t;
 #define HAL_TIMER_RATE         ((F_CPU) / 2)    // frequency of timers peripherals
 
 #ifndef STEP_TIMER_NUM
-  #define STEP_TIMER_NUM        2  // Timer Index for Stepper
+#define STEP_TIMER_NUM 2  // index of timer to use for stepper
-#endif
-#ifndef PULSE_TIMER_NUM
-  #define PULSE_TIMER_NUM       STEP_TIMER_NUM
-#endif
-#ifndef TEMP_TIMER_NUM
-  #define TEMP_TIMER_NUM        4  // Timer Index for Temperature
-#endif
-#ifndef TONE_TIMER_NUM
-  #define TONE_TIMER_NUM        6  // index of timer to use for beeper tones
 #endif
+#define TEMP_TIMER_NUM 4  // index of timer to use for temperature
+#define PULSE_TIMER_NUM STEP_TIMER_NUM
+#define TONE_TIMER_NUM 6  // index of timer to use for beeper tones
 
 #define TEMP_TIMER_FREQUENCY   1000 // temperature interrupt frequency
 
@@ -70,12 +66,8 @@ typedef uint32_t hal_timer_t;
 #ifndef HAL_STEP_TIMER_ISR
   #define HAL_STEP_TIMER_ISR() void TC2_Handler()
 #endif
-#ifndef HAL_TEMP_TIMER_ISR
+#define HAL_TEMP_TIMER_ISR()  void TC4_Handler()
-  #define HAL_TEMP_TIMER_ISR() void TC4_Handler()
+#define HAL_TONE_TIMER_ISR()  void TC6_Handler()
-#endif
-#ifndef HAL_TONE_TIMER_ISR
-  #define HAL_TONE_TIMER_ISR() void TC6_Handler()
-#endif
 
 // ------------------------
 // Types

Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h

@@ -43,7 +43,7 @@
 #pragma once
 
 /**
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 /**
@@ -93,5 +93,5 @@
 #define USB_VBOF_GPIO               (PIO_PB10_IDX)
 #define USB_VBOF_FLAGS              (PIO_PERIPH_A | PIO_DEFAULT)
 /*! Active level of the USB_VBOF output pin. */
-#define USB_VBOF_ACTIVE_STATE       LOW
+#define USB_VBOF_ACTIVE_LEVEL       LOW
 /* ------------------------------------------------------------------------ */

Marlin/src/HAL/HAL_DUE/usb/compiler.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef UTILS_COMPILER_H
@@ -173,11 +173,11 @@
 #   define __always_inline   __forceinline
 #elif (defined __GNUC__)
 #ifdef __always_inline
-# undef __always_inline
+#	undef __always_inline
 #endif
-# define __always_inline   inline __attribute__((__always_inline__))
+#	define __always_inline   inline __attribute__((__always_inline__))
 #elif (defined __ICCARM__)
-# define __always_inline   _Pragma("inline=forced")
+#	define __always_inline   _Pragma("inline=forced")
 #endif
 
 /**
@@ -188,11 +188,11 @@
  * heuristics and not inline the function.
  */
 #ifdef __CC_ARM
-# define __no_inline   __attribute__((noinline))
+#   define __no_inline   __attribute__((noinline))
 #elif (defined __GNUC__)
-# define __no_inline   __attribute__((__noinline__))
+#	define __no_inline   __attribute__((__noinline__))
 #elif (defined __ICCARM__)
-# define __no_inline   _Pragma("inline=never")
+#	define __no_inline   _Pragma("inline=never")
 #endif
 
 /*! \brief This macro is used to test fatal errors.
@@ -211,9 +211,9 @@
 #  else
 #undef TEST_SUITE_DEFINE_ASSERT_MACRO
 #    define Assert(expr) \
-  {\
+	{\
-    if (!(expr)) while (true);\
+		if (!(expr)) while (true);\
-  }
+	}
 #  endif
 #else
 #  define Assert(expr) ((void) 0)
@@ -609,37 +609,37 @@ typedef struct
 #   define clz(u)              ((u) ? __CLZ(u) : 32)
 #else
 #   define clz(u)              (((u) == 0)          ? 32 : \
-                                ((u) & (1UL << 31)) ?  0 : \
+                                ((u) & (1ul << 31)) ?  0 : \
-                                ((u) & (1UL << 30)) ?  1 : \
+                                ((u) & (1ul << 30)) ?  1 : \
-                                ((u) & (1UL << 29)) ?  2 : \
+                                ((u) & (1ul << 29)) ?  2 : \
-                                ((u) & (1UL << 28)) ?  3 : \
+                                ((u) & (1ul << 28)) ?  3 : \
-                                ((u) & (1UL << 27)) ?  4 : \
+                                ((u) & (1ul << 27)) ?  4 : \
-                                ((u) & (1UL << 26)) ?  5 : \
+                                ((u) & (1ul << 26)) ?  5 : \
-                                ((u) & (1UL << 25)) ?  6 : \
+                                ((u) & (1ul << 25)) ?  6 : \
-                                ((u) & (1UL << 24)) ?  7 : \
+                                ((u) & (1ul << 24)) ?  7 : \
-                                ((u) & (1UL << 23)) ?  8 : \
+                                ((u) & (1ul << 23)) ?  8 : \
-                                ((u) & (1UL << 22)) ?  9 : \
+                                ((u) & (1ul << 22)) ?  9 : \
-                                ((u) & (1UL << 21)) ? 10 : \
+                                ((u) & (1ul << 21)) ? 10 : \
-                                ((u) & (1UL << 20)) ? 11 : \
+                                ((u) & (1ul << 20)) ? 11 : \
-                                ((u) & (1UL << 19)) ? 12 : \
+                                ((u) & (1ul << 19)) ? 12 : \
-                                ((u) & (1UL << 18)) ? 13 : \
+                                ((u) & (1ul << 18)) ? 13 : \
-                                ((u) & (1UL << 17)) ? 14 : \
+                                ((u) & (1ul << 17)) ? 14 : \
-                                ((u) & (1UL << 16)) ? 15 : \
+                                ((u) & (1ul << 16)) ? 15 : \
-                                ((u) & (1UL << 15)) ? 16 : \
+                                ((u) & (1ul << 15)) ? 16 : \
-                                ((u) & (1UL << 14)) ? 17 : \
+                                ((u) & (1ul << 14)) ? 17 : \
-                                ((u) & (1UL << 13)) ? 18 : \
+                                ((u) & (1ul << 13)) ? 18 : \
-                                ((u) & (1UL << 12)) ? 19 : \
+                                ((u) & (1ul << 12)) ? 19 : \
-                                ((u) & (1UL << 11)) ? 20 : \
+                                ((u) & (1ul << 11)) ? 20 : \
-                                ((u) & (1UL << 10)) ? 21 : \
+                                ((u) & (1ul << 10)) ? 21 : \
-                                ((u) & (1UL <<  9)) ? 22 : \
+                                ((u) & (1ul <<  9)) ? 22 : \
-                                ((u) & (1UL <<  8)) ? 23 : \
+                                ((u) & (1ul <<  8)) ? 23 : \
-                                ((u) & (1UL <<  7)) ? 24 : \
+                                ((u) & (1ul <<  7)) ? 24 : \
-                                ((u) & (1UL <<  6)) ? 25 : \
+                                ((u) & (1ul <<  6)) ? 25 : \
-                                ((u) & (1UL <<  5)) ? 26 : \
+                                ((u) & (1ul <<  5)) ? 26 : \
-                                ((u) & (1UL <<  4)) ? 27 : \
+                                ((u) & (1ul <<  4)) ? 27 : \
-                                ((u) & (1UL <<  3)) ? 28 : \
+                                ((u) & (1ul <<  3)) ? 28 : \
-                                ((u) & (1UL <<  2)) ? 29 : \
+                                ((u) & (1ul <<  2)) ? 29 : \
-                                ((u) & (1UL <<  1)) ? 30 : \
+                                ((u) & (1ul <<  1)) ? 30 : \
                                 31)
 #endif
 #endif
@@ -654,38 +654,38 @@ typedef struct
 #if (defined __GNUC__) || (defined __CC_ARM)
 #   define ctz(u)              ((u) ? __builtin_ctz(u) : 32)
 #else
-#   define ctz(u)              ((u) & (1UL <<  0) ?  0 : \
+#   define ctz(u)              ((u) & (1ul <<  0) ?  0 : \
-                                (u) & (1UL <<  1) ?  1 : \
+                                (u) & (1ul <<  1) ?  1 : \
-                                (u) & (1UL <<  2) ?  2 : \
+                                (u) & (1ul <<  2) ?  2 : \
-                                (u) & (1UL <<  3) ?  3 : \
+                                (u) & (1ul <<  3) ?  3 : \
-                                (u) & (1UL <<  4) ?  4 : \
+                                (u) & (1ul <<  4) ?  4 : \
-                                (u) & (1UL <<  5) ?  5 : \
+                                (u) & (1ul <<  5) ?  5 : \
-                                (u) & (1UL <<  6) ?  6 : \
+                                (u) & (1ul <<  6) ?  6 : \
-                                (u) & (1UL <<  7) ?  7 : \
+                                (u) & (1ul <<  7) ?  7 : \
-                                (u) & (1UL <<  8) ?  8 : \
+                                (u) & (1ul <<  8) ?  8 : \
-                                (u) & (1UL <<  9) ?  9 : \
+                                (u) & (1ul <<  9) ?  9 : \
-                                (u) & (1UL << 10) ? 10 : \
+                                (u) & (1ul << 10) ? 10 : \
-                                (u) & (1UL << 11) ? 11 : \
+                                (u) & (1ul << 11) ? 11 : \
-                                (u) & (1UL << 12) ? 12 : \
+                                (u) & (1ul << 12) ? 12 : \
-                                (u) & (1UL << 13) ? 13 : \
+                                (u) & (1ul << 13) ? 13 : \
-                                (u) & (1UL << 14) ? 14 : \
+                                (u) & (1ul << 14) ? 14 : \
-                                (u) & (1UL << 15) ? 15 : \
+                                (u) & (1ul << 15) ? 15 : \
-                                (u) & (1UL << 16) ? 16 : \
+                                (u) & (1ul << 16) ? 16 : \
-                                (u) & (1UL << 17) ? 17 : \
+                                (u) & (1ul << 17) ? 17 : \
-                                (u) & (1UL << 18) ? 18 : \
+                                (u) & (1ul << 18) ? 18 : \
-                                (u) & (1UL << 19) ? 19 : \
+                                (u) & (1ul << 19) ? 19 : \
-                                (u) & (1UL << 20) ? 20 : \
+                                (u) & (1ul << 20) ? 20 : \
-                                (u) & (1UL << 21) ? 21 : \
+                                (u) & (1ul << 21) ? 21 : \
-                                (u) & (1UL << 22) ? 22 : \
+                                (u) & (1ul << 22) ? 22 : \
-                                (u) & (1UL << 23) ? 23 : \
+                                (u) & (1ul << 23) ? 23 : \
-                                (u) & (1UL << 24) ? 24 : \
+                                (u) & (1ul << 24) ? 24 : \
-                                (u) & (1UL << 25) ? 25 : \
+                                (u) & (1ul << 25) ? 25 : \
-                                (u) & (1UL << 26) ? 26 : \
+                                (u) & (1ul << 26) ? 26 : \
-                                (u) & (1UL << 27) ? 27 : \
+                                (u) & (1ul << 27) ? 27 : \
-                                (u) & (1UL << 28) ? 28 : \
+                                (u) & (1ul << 28) ? 28 : \
-                                (u) & (1UL << 29) ? 29 : \
+                                (u) & (1ul << 29) ? 29 : \
-                                (u) & (1UL << 30) ? 30 : \
+                                (u) & (1ul << 30) ? 30 : \
-                                (u) & (1UL << 31) ? 31 : \
+                                (u) & (1ul << 31) ? 31 : \
                                 32)
 #endif
 #endif
@@ -1106,16 +1106,17 @@ static inline uint16_t convert_byte_array_to_16_bit(uint8_t *data)
 /* Converts a 8 Byte array into a 32-Bit value */
 static inline uint32_t convert_byte_array_to_32_bit(uint8_t *data)
 {
-  union
+	union
-  {
+	{
-    uint32_t u32;
+		uint32_t u32;
-    uint8_t u8[8];
+		uint8_t u8[8];
-  }long_addr;
+	}long_addr;
-  uint8_t index;
+	uint8_t index;
-  for (index = 0; index < 4; index++) {
+	for (index = 0; index < 4; index++)
-    long_addr.u8[index] = *data++;
+	{
-  }
+		long_addr.u8[index] = *data++;
-  return long_addr.u32;
+	}
+	return long_addr.u32;
 }
 
 /**

Marlin/src/HAL/HAL_DUE/usb/conf_access.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_ACCESS_H_

Marlin/src/HAL/HAL_DUE/usb/conf_clock.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CONF_CLOCK_H_INCLUDED

Marlin/src/HAL/HAL_DUE/usb/conf_usb.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_USB_H_
@@ -78,6 +78,10 @@
 //! To define a Full speed device
 //#define USB_DEVICE_FULL_SPEED
 
+#if MB(ARCHIM1)
+  #define USB_DEVICE_FULL_SPEED
+#endif
+
 //! To authorize the High speed
 #ifndef USB_DEVICE_FULL_SPEED
   #if (UC3A3||UC3A4)