sravan/Marlin-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
a3101a03ff2ab42fc6488305604bb77b6b795b37
Marlin-Firmware/Marlin/src/feature
History
InsanityAutomation a3101a03ff 🚸 Fix repeating "Power Off" message (#26755)
2024-02-07 21:14:07 -06:00
..
adc
✨ Add M3426 A<addr> parameter (#24130)
2022-05-07 18:13:09 -05:00
bedlevel
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
dac
🧑‍💻 Update planner/stepper includes
2022-08-01 01:59:37 -05:00
digipot
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
leds
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
mmu
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
password
🧑‍💻 HAS_MARLINUI_MENU, HAS_MANUAL_MOVE_MENU
2022-05-07 15:38:55 -05:00
ammeter.cpp
🎨 Laser Ammeter followup (#22079)
2021-06-15 00:09:52 -05:00
ammeter.h
🎨 Laser Ammeter followup (#22079)
2021-06-15 00:09:52 -05:00
babystep.cpp
✨ Bed Distance Sensor (#24554)
2022-08-06 18:50:49 -05:00
babystep.h
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
backlash.cpp
♻️ EITHER/BOTH => ANY/ALL
2024-02-07 21:14:06 -06:00
backlash.h
🐛 Fix backlash applied steps when config changes (#23826)
2022-05-07 15:58:30 -05:00
baricuda.cpp
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
baricuda.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
binary_stream.cpp
Optimize G-code / feature dependencies (#18919)
2020-08-06 08:14:00 -05:00
binary_stream.h
♻️ SDSUPPORT => HAS_MEDIA
2024-02-07 21:14:07 -06:00
bltouch.cpp
⚡️ Skip a redundant BLTouch::command (#25656)
2023-05-17 00:33:17 -05:00
bltouch.h
🧑‍💻 Remove extraneous 'inline' hints
2022-01-09 04:33:17 -06:00
cancel_object.cpp
♻️ EITHER/BOTH => ANY/ALL
2024-02-07 21:14:06 -06:00
cancel_object.h
🧑‍💻 Remove extraneous 'inline' hints
2022-01-09 04:33:17 -06:00
caselight.cpp
♻️ Refactor HAL as singleton (#23357, #23871, #23897)
2022-05-07 15:58:30 -05:00
caselight.h
🚸 Case Light, LED menus for E3V2 DWIN Enhanced UI (#23590)
2022-05-07 15:58:30 -05:00
closedloop.cpp
💡 Adjust headers, formatting
2021-10-02 22:31:16 -05:00
closedloop.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
controllerfan.cpp
✨ BigTreeTech EBB42 v1.1 (#24964)
2022-12-17 22:17:38 -06:00
controllerfan.h
🧑‍💻 Remove extraneous 'inline' hints
2022-01-09 04:33:17 -06:00
cooler.cpp
♻️ EITHER/BOTH => ANY/ALL
2024-02-07 21:14:06 -06:00
cooler.h
🏗️ Allow headless Flow Meter (#22234)
2021-07-17 02:31:54 -05:00
direct_stepping.cpp
🎨 Misc. 'else' cleanup
2022-08-01 01:59:37 -05:00
direct_stepping.h
🧑‍💻 Misc. updates for extra axes (#23521)
2022-05-07 15:12:45 -05:00
e_parser.cpp
♻️ SDSUPPORT => HAS_MEDIA
2024-02-07 21:14:07 -06:00
e_parser.h
♻️ SDSUPPORT => HAS_MEDIA
2024-02-07 21:14:07 -06:00
easythreed_ui.cpp
🎨 Misc. cleanup, comments
2022-05-07 15:10:19 -05:00
easythreed_ui.h
✨ EasyThreeD ET4000+ board and UI (#23080)
2021-12-25 03:23:09 -06:00
encoder_i2c.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
encoder_i2c.h
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
ethernet.cpp
🩹 Tweak startup message (#22633)
2021-09-12 19:18:23 -05:00
ethernet.h
Teensy 4.1 Ethernet support (#19801)
2020-10-20 14:35:29 -05:00
fancheck.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
fancheck.h
🧑‍💻 General and Axis-based bitfield flags (#23989)
2022-05-12 04:18:02 -05:00
fanmux.cpp
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
fanmux.h
Remove extraneous 'extern' hints (#21516)
2021-04-02 14:22:43 -05:00
filwidth.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
filwidth.h
🐛 Use ADC_VREF for Filament Width ADC Vref (#23977)
2022-05-07 16:49:47 -05:00
fwretract.cpp
🧑‍💻 Update planner/stepper includes
2022-08-01 01:59:37 -05:00
fwretract.h
🧑‍💻 General and Axis-based bitfield flags (#23989)
2022-05-12 04:18:02 -05:00
host_actions.cpp
♻️ SDSUPPORT => HAS_MEDIA
2024-02-07 21:14:07 -06:00
host_actions.h
🧑‍💻 HostUI::continue_prompt method
2023-05-17 00:33:17 -05:00
hotend_idle.cpp
🎨 Apply F() to status message
2021-12-25 00:20:45 -06:00
hotend_idle.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
joystick.cpp
⚡️ Optimize G2-G3 Arcs (#24366)
2022-07-15 18:48:15 -05:00
joystick.h
🎨 Check flags without ENABLED
2021-07-17 01:54:27 -05:00
max7219.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
max7219.h
🚸 Vertical Max7219::quantity in portrait orientation (#24415)
2022-07-01 07:54:53 -05:00
meatpack.cpp
🎨 Fix spelling, whitespace
2022-06-05 21:11:27 -05:00
meatpack.h
🎨 Fix spelling, whitespace
2022-06-05 21:11:27 -05:00
mixing.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
mixing.h
♻️ EITHER/BOTH => ANY/ALL
2024-02-07 21:14:06 -06:00
pause.cpp
♻️ SDSUPPORT => HAS_MEDIA
2024-02-07 21:14:07 -06:00
pause.h
♻️ EITHER/BOTH => ANY/ALL
2024-02-07 21:14:06 -06:00
power_monitor.cpp
🚸 Optional Cutter/Laser status for HD44780 (#25003)
2022-12-16 14:23:25 -06:00
power_monitor.h
♻️ SDSUPPORT => HAS_MEDIA
2024-02-07 21:14:07 -06:00
power.cpp
🚸 Fix repeating "Power Off" message (#26755)
2024-02-07 21:14:07 -06:00
power.h
♻️ EITHER/BOTH => ANY/ALL
2024-02-07 21:14:06 -06:00
powerloss.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
powerloss.h
🧑‍💻 General 'MediaFile' type alias (#24424)
2023-04-07 17:01:32 -05:00
probe_temp_comp.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
probe_temp_comp.h
⚡️ Apply PTC on all probing (#23764)
2022-05-07 15:58:30 -05:00
repeat.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
repeat.h
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
runout.cpp
🔧 DWIN_CREALITY_LCD_ENHANCED => DWIN_LCD_PROUI
2022-05-07 15:58:31 -05:00
runout.h
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
solenoid.cpp
♻️ EITHER/BOTH => ANY/ALL
2024-02-07 21:14:06 -06:00
solenoid.h
🩹 No PE_MAGNET_ON_STATE without PARKING_EXTRUDER
2022-05-07 16:00:49 -05:00
spindle_laser_types.h
⚡️ Fix and improve Inline Laser Power (#22690)
2022-07-15 18:48:14 -05:00
spindle_laser.cpp
🐛 Fix apply_power for SPINDLE_SERVO (#25465)
2023-04-07 17:55:46 -05:00
spindle_laser.h
🧑‍💻 Minor SpindleLaser::set_enabled tweak
2023-05-17 00:33:18 -05:00
stepper_driver_safety.cpp
SDIO retry, hsd clock, etc.
2023-04-07 16:33:39 -05:00
stepper_driver_safety.h
BTT SKR V2.0 / Stepper Driver Anti-Reverse Protection (#21503)
2021-04-27 02:22:09 -05:00
tmc_util.cpp
🧑‍💻 Apply simplified ?:
2023-05-17 00:33:17 -05:00
tmc_util.h
✨ Support for up to 9 axes (#23112, #24036, #24231)
2022-06-05 23:11:31 -05:00
tramming.cpp
Up to 6 Tramming points (#20720)
2021-01-08 18:42:08 -06:00
tramming.h
🎨 screws_tilt_adjust_pos => tramming_points
2021-09-12 19:30:05 -05:00
twibus.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
twibus.h
🧑‍💻 Remove extraneous 'inline' hints
2022-01-09 04:33:17 -06:00
x_twist.cpp
♻️ Remove LOOP macros
2024-02-07 21:14:07 -06:00
x_twist.h
🚸 Universal X_AXIS_TWIST_COMPENSATION (#23828)
2022-05-07 15:58:30 -05:00
z_stepper_align.cpp
💥 Num Axes / Multi-Stepper based on Driver Types (#24106, #24120)
2022-06-05 20:58:39 -05:00
z_stepper_align.h
💥 Num Axes / Multi-Stepper based on Driver Types (#24106, #24120)
2022-06-05 20:58:39 -05:00