.Xresources

@@ -19,6 +19,28 @@
 #define CYAN2      #9AEDFE
 #define ORANGE     #FFB86C
 
+! Regular DPI Parameters
+#define DPI 96
+#define BAR_HEIGHT 25
+#define MODULE_MARGIN 2
+#define TRAY_MAXSIZE 15
+#define TRAY_SCALE 1
+#define BORDER_SIZE 2
+#define INNER_GAPS 20
+#define OUTER_GAPS 10
+#define MAXLEN 75
+
+! ! HiDPI Parameters
+! #define DPI 192
+! #define BAR_HEIGHT 50
+! #define MODULE_MARGIN 1
+! #define TRAY_MAXSIZE 30
+! #define TRAY_SCALE 1
+! #define BORDER_SIZE 4
+! #define INNER_GAPS 40
+! #define OUTER_GAPS 20
+! #define MAXLEN 45
+
 ! Dracula Xresources Palette
 *.foreground: FOREGROUND
 *.background: BACKGROUND
@@ -40,27 +62,13 @@
 *.color15:    WHITE1
 *.color16:    ORANGE
 
-! System76 Oryx Pro 7 DPI Parameters
-#define DPI 96
-#define BAR_HEIGHT 25
-#define MODULE_MARGIN 0
-#define MODULE_PADDING 0
-#define MODULE_DWM_PADDING 2
-#define TRAY_MAXSIZE 25
-#define TRAY_SCALE 1
-#define BORDER_SIZE 2
-#define INNER_GAPS 20
-#define OUTER_GAPS 10
-#define MAXLEN 25
-#define CURSOR_SIZE 16
-
 ! DWM
-dwm.normbordercolor: BLACK2
 dwm.normbgcolor:     BACKGROUND
+dwm.normbordercolor: BLACK2
 dwm.normfgcolor:     FOREGROUND
+dwm.selfgcolor:      BACKGROUND
 dwm.selbordercolor:  PURPLE1
 dwm.selbgcolor:      PURPLE1
-dwm.selfgcolor:      BACKGROUND
 dwm.borderpx:        BORDER_SIZE
 dwm.gappih:          INNER_GAPS
 dwm.gappiv:          INNER_GAPS
@@ -70,12 +78,27 @@ dwm.gappov:          OUTER_GAPS
 ! Polybar
 polybar.bar-height:    BAR_HEIGHT
 polybar.module-margin: MODULE_MARGIN
-polybar.module-padding:     MODULE_PADDING
-polybar.module-dwm-padding: MODULE_DWM_PADDING
 polybar.tray-maxsize:  TRAY_MAXSIZE
 polybar.tray-scale:    TRAY_SCALE
 polybar.maxlen:        MAXLEN
 
+! Dunst
+dunst.geometry-x:           OUTER_GAPS
+dunst.geometry-y:           BAR_HEIGHT
+dunst.sep-height:           BORDER_SIZE
+dunst.padding:              OUTER_GAPS
+dunst.horiz-padding:        OUTER_GAPS
+dunst.max-icon-size:        DPI
+dunst.frame-width:          BORDER_SIZE
+dunst.low-background:       BACKGROUND
+dunst.low-foreground:       FOREGROUND
+dunst.low-frame:            PURPLE1
+dunst.normal-background:    BACKGROUND
+dunst.normal-foreground:    FOREGROUND
+dunst.normal-frame:         PURPLE1
+dunst.critical-background:  RED1
+dunst.critical-foreground:  FOREGROUND
+dunst.critical-frame:       PURPLE1
+
 ! Display Scaling
 *.dpi: DPI
-Xcursor.size: CURSOR_SIZE

.bashrc

@@ -116,13 +116,15 @@ if ! shopt -oq posix; then
     fi
 fi
 
-# ENVIRONMENT VARIABLES
+# Run neofetch when opening terminal
-export EDITOR="emacs"
+neofetch
-export TERM=xterm-256color
-export QT_STYLE_OVERRIDE=kvantum
-export XDG_CONFIG_HOME=$HOME/.config
 
-# Greeting
+# ALIASES
-clear
+alias config='/usr/bin/git --git-dir=$HOME/.cfg/ --work-tree=$HOME'
-krabby random
+
-echo "bash shell"
+# EXPORTS
+export EDITOR="code -w"
+export TERM=xterm-256color
+
+# Starship Prompt
+eval "$(starship init bash)"

.config/MangoHud/MangoHud.conf

@@ -0,0 +1,32 @@
+################### File Generated by GOverlay ###################
+
+
+
+cpu_stats
+cpu_temp
+cpu_color=2e97cb
+cpu_text=CPU
+gpu_stats
+gpu_temp
+gpu_core_clock
+gpu_mem_clock
+vulkan_driver
+gpu_name
+gpu_color=2e9762
+gpu_text=GPU
+vram
+vram_color=ad64c1
+ram
+ram_color=c26693
+io_color=a491d3
+frame_timing=1
+frametime_color=00ff00
+background_alpha=0.4
+font_size=24
+background_color=020202
+position=top-left
+text_color=ffffff
+toggle_hud=Shift_R+F12
+toggle_logging=Shift_L+F2
+output_file=/home/sravan/mangohud_log_ 
+media_player_name=spotify

.config/dunst/dunstrc

@@ -0,0 +1,439 @@
+[global]
+    ### Display ###
+
+    # Which monitor should the notifications be displayed on.
+    monitor = 0
+
+    # Display notification on focused monitor.  Possible modes are:
+    #   mouse: follow mouse pointer
+    #   keyboard: follow window with keyboard focus
+    #   none: don't follow anything
+    #
+    # "keyboard" needs a window manager that exports the
+    # _NET_ACTIVE_WINDOW property.
+    # This should be the case for almost all modern window managers.
+    #
+    # If this option is set to mouse or keyboard, the monitor option
+    # will be ignored.
+    follow = keyboard
+
+    # The geometry of the window:
+    #   [{width}]x{height}[+/-{x}+/-{y}]
+    # The geometry of the message window.
+    # The height is measured in number of notifications everything else
+    # in pixels.  If the width is omitted but the height is given
+    # ("-geometry x2"), the message window expands over the whole screen
+    # (dmenu-like).  If width is 0, the window expands to the longest
+    # message displayed.  A positive x is measured from the left, a
+    # negative from the right side of the screen.  Y is measured from
+    # the top and down respectively.
+    # The width can be negative.  In this case the actual width is the
+    # screen width minus the width defined in within the geometry option.
+    geometry = "0x0-10+40"
+
+    # Show how many messages are currently hidden (because of geometry).
+    indicate_hidden = yes
+
+    # Shrink window if it's smaller than the width.  Will be ignored if
+    # width is 0.
+    shrink = no
+
+    # The transparency of the window.  Range: [0; 100].
+    # This option will only work if a compositing window manager is
+    # present (e.g. xcompmgr, compiz, etc.).
+    transparency = 15
+
+    # The height of the entire notification.  If the height is smaller
+    # than the font height and padding combined, it will be raised
+    # to the font height and padding.
+    notification_height = 0
+
+    # Draw a line of "separator_height" pixel height between two
+    # notifications.
+    # Set to 0 to disable.
+    separator_height = 1
+
+    # Padding between text and separator.
+    padding = 8
+
+    # Horizontal padding.
+    horizontal_padding = 10
+
+    # Defines width in pixels of frame around the notification window.
+    # Set to 0 to disable.
+    frame_width = 2
+
+    # Defines color of the frame around the notification window.
+    frame_color = "#aaaaaa"
+
+    # Define a color for the separator.
+    # possible values are:
+    #  * auto: dunst tries to find a color fitting to the background;
+    #  * foreground: use the same color as the foreground;
+    #  * frame: use the same color as the frame;
+    #  * anything else will be interpreted as a X color.
+    separator_color = auto
+
+    # Sort messages by urgency.
+    sort = yes
+
+    # Don't remove messages, if the user is idle (no mouse or keyboard input)
+    # for longer than idle_threshold seconds.
+    # Set to 0 to disable.
+    # A client can set the 'transient' hint to bypass this. See the rules
+    # section for how to disable this if necessary
+    idle_threshold = 120
+
+    ### Text ###
+
+    font = Monospace 10
+
+    # The spacing between lines.  If the height is smaller than the
+    # font height, it will get raised to the font height.
+    line_height = 0
+
+    # Possible values are:
+    # full: Allow a small subset of html markup in notifications:
+    #        <b>bold</b>
+    #        <i>italic</i>
+    #        <s>strikethrough</s>
+    #        <u>underline</u>
+    #
+    #        For a complete reference see
+    #        <https://developer.gnome.org/pango/stable/pango-Markup.html>.
+    #
+    # strip: This setting is provided for compatibility with some broken
+    #        clients that send markup even though it's not enabled on the
+    #        server. Dunst will try to strip the markup but the parsing is
+    #        simplistic so using this option outside of matching rules for
+    #        specific applications *IS GREATLY DISCOURAGED*.
+    #
+    # no:    Disable markup parsing, incoming notifications will be treated as
+    #        plain text. Dunst will not advertise that it has the body-markup
+    #        capability if this is set as a global setting.
+    #
+    # It's important to note that markup inside the format option will be parsed
+    # regardless of what this is set to.
+    markup = full
+
+    # The format of the message.  Possible variables are:
+    #   %a  appname
+    #   %s  summary
+    #   %b  body
+    #   %i  iconname (including its path)
+    #   %I  iconname (without its path)
+    #   %p  progress value if set ([  0%] to [100%]) or nothing
+    #   %n  progress value if set without any extra characters
+    #   %%  Literal %
+    # Markup is allowed
+    format = "<b>%s</b> | <i>%a</i> %p\n%b"
+
+    # Alignment of message text.
+    # Possible values are "left", "center" and "right".
+    alignment = center
+
+    # Vertical alignment of message text and icon.
+    # Possible values are "top", "center" and "bottom".
+    vertical_alignment = center
+
+    # Show age of message if message is older than show_age_threshold
+    # seconds.
+    # Set to -1 to disable.
+    show_age_threshold = 60
+
+    # Split notifications into multiple lines if they don't fit into
+    # geometry.
+    word_wrap = yes
+
+    # When word_wrap is set to no, specify where to make an ellipsis in long lines.
+    # Possible values are "start", "middle" and "end".
+    ellipsize = middle
+
+    # Ignore newlines '\n' in notifications.
+    ignore_newline = no
+
+    # Stack together notifications with the same content
+    stack_duplicates = true
+
+    # Hide the count of stacked notifications with the same content
+    hide_duplicate_count = false
+
+    # Display indicators for URLs (U) and actions (A).
+    show_indicators = yes
+
+    ### Icons ###
+
+    # Align icons left/right/off
+    icon_position = left
+
+    # Scale small icons up to this size, set to 0 to disable. Helpful
+    # for e.g. small files or high-dpi screens. In case of conflict,
+    # max_icon_size takes precedence over this.
+    min_icon_size = 0
+
+    # Scale larger icons down to this size, set to 0 to disable
+    max_icon_size = 96
+
+    # Paths to default icons.
+    icon_path = /usr/share/icons/Papirus-Dark/16x16/status/:/usr/share/icons/Papirus-Dark/16x16/devices/:/usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
+
+    ### History ###
+
+    # Should a notification popped up from history be sticky or timeout
+    # as if it would normally do.
+    sticky_history = yes
+
+    # Maximum amount of notifications kept in history
+    history_length = 20
+
+    ### Misc/Advanced ###
+
+    # dmenu path.
+    dmenu = /usr/bin/rofi -dmenu -p dunst:
+
+    # Browser for opening urls in context menu.
+    browser = /usr/bin/vivaldi-stable
+
+    # Always run rule-defined scripts, even if the notification is suppressed
+    always_run_script = true
+
+    # Define the title of the windows spawned by dunst
+    title = Dunst
+
+    # Define the class of the windows spawned by dunst
+    class = Dunst
+
+    # Print a notification on startup.
+    # This is mainly for error detection, since dbus (re-)starts dunst
+    # automatically after a crash.
+    startup_notification = true
+
+    # Manage dunst's desire for talking
+    # Can be one of the following values:
+    #  crit: Critical features. Dunst aborts
+    #  warn: Only non-fatal warnings
+    #  mesg: Important Messages
+    #  info: all unimportant stuff
+    # debug: all less than unimportant stuff
+    verbosity = mesg
+
+    # Define the corner radius of the notification window
+    # in pixel size. If the radius is 0, you have no rounded
+    # corners.
+    # The radius will be automatically lowered if it exceeds half of the
+    # notification height to avoid clipping text and/or icons.
+    corner_radius = 10
+
+    # Ignore the dbus closeNotification message.
+    # Useful to enforce the timeout set by dunst configuration. Without this
+    # parameter, an application may close the notification sent before the 
+    # user defined timeout.
+    ignore_dbusclose = false
+
+    ### Legacy
+
+    # Use the Xinerama extension instead of RandR for multi-monitor support.
+    # This setting is provided for compatibility with older nVidia drivers that
+    # do not support RandR and using it on systems that support RandR is highly
+    # discouraged.
+    #
+    # By enabling this setting dunst will not be able to detect when a monitor
+    # is connected or disconnected which might break follow mode if the screen
+    # layout changes.
+    force_xinerama = false
+
+    ### mouse
+
+    # Defines list of actions for each mouse event
+    # Possible values are:
+    # * none: Don't do anything.
+    # * do_action: If the notification has exactly one action, or one is marked as default,
+    #              invoke it. If there are multiple and no default, open the context menu.
+    # * close_current: Close current notification.
+    # * close_all: Close all notifications.
+    # These values can be strung together for each mouse event, and
+    # will be executed in sequence.
+    mouse_left_click = close_current
+    mouse_middle_click = close_all
+    mouse_right_click = do_action, close_current
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+    # Calculate the dpi to use on a per-monitor basis.
+    # If this setting is enabled the Xft.dpi value will be ignored and instead
+    # dunst will attempt to calculate an appropriate dpi value for each monitor
+    # using the resolution and physical size. This might be useful in setups
+    # where there are multiple screens with very different dpi values.
+    per_monitor_dpi = false
+
+[shortcuts]
+
+    # Shortcuts are specified as [modifier+][modifier+]...key
+    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
+    # "mod3" and "mod4" (windows-key).
+    # Xev might be helpful to find names for keys.
+
+    # Close notification.
+    # close = ctrl+space
+
+    # Close all notifications.
+    # close_all = ctrl+shift+space
+
+    # Redisplay last message(s).
+    # On the US keyboard layout "grave" is normally above TAB and left
+    # of "1". Make sure this key actually exists on your keyboard layout,
+    # e.g. check output of 'xmodmap -pke'
+    # history = ctrl+grave
+
+    # Context menu.
+    # context = ctrl+shift+period
+
+[urgency_low]
+    # IMPORTANT: colors have to be defined in quotation marks.
+    # Otherwise the "#" and following would be interpreted as a comment.
+    # background = "#222222"
+    # foreground = "#888888"
+    frame_color = "#bd93f9"
+    background = "#282a36"
+    foreground = "#f8f8f2"
+    timeout = 10
+    # Icon for notifications with low urgency, uncomment to enable
+    #icon = /path/to/icon
+
+[urgency_normal]
+    # background = "#285577"
+    # foreground = "#ffffff"
+    frame_color = "#bd93f9"
+    background = "#282a36"
+    foreground = "#f8f8f2"
+    timeout = 10
+    # Icon for notifications with normal urgency, uncomment to enable
+    #icon = /path/to/icon
+
+[urgency_critical]
+    # background = "#900000"
+    # foreground = "#ffffff"
+    frame_color = "#282a36"
+    background = "#ff5555"
+    foreground = "#f8f8f2"
+    timeout = 0
+    # Icon for notifications with critical urgency, uncomment to enable
+    #icon = /path/to/icon
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+#
+# Messages can be matched by
+#    appname (discouraged, see desktop_entry)
+#    body
+#    category
+#    desktop_entry
+#    icon
+#    match_transient
+#    msg_urgency
+#    stack_tag
+#    summary
+#
+# and you can override the
+#    background
+#    foreground
+#    format
+#    frame_color
+#    fullscreen
+#    new_icon
+#    set_stack_tag
+#    set_transient
+#    timeout
+#    urgency
+#
+# Shell-like globbing will get expanded.
+#
+# Instead of the appname filter, it's recommended to use the desktop_entry filter.
+# GLib based applications export their desktop-entry name. In comparison to the appname,
+# the desktop-entry won't get localized.
+#
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+#   script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: if you don't want a notification to be displayed, set the format
+# to "".
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+# Disable the transient hint so that idle_threshold cannot be bypassed from the
+# client
+#[transient_disable]
+#    match_transient = yes
+#    set_transient = no
+#
+# Make the handling of transient notifications more strict by making them not
+# be placed in history.
+#[transient_history_ignore]
+#    match_transient = yes
+#    history_ignore = yes
+
+# fullscreen values
+# show: show the notifications, regardless if there is a fullscreen window opened
+# delay: displays the new notification, if there is no fullscreen window active
+#        If the notification is already drawn, it won't get undrawn.
+# pushback: same as delay, but when switching into fullscreen, the notification will get
+#           withdrawn from screen again and will get delayed like a new notification
+#[fullscreen_delay_everything]
+#    fullscreen = delay
+#[fullscreen_show_critical]
+#    msg_urgency = critical
+#    fullscreen = show
+
+#[espeak]
+#    summary = "*"
+#    script = dunst_espeak.sh
+
+#[script-test]
+#    summary = "*script*"
+#    script = dunst_test.sh
+
+#[ignore]
+#    # This notification will not be displayed
+#    summary = "foobar"
+#    format = ""
+
+#[history-ignore]
+#    # This notification will not be saved in history
+#    summary = "foobar"
+#    history_ignore = yes
+
+#[skip-display]
+#    # This notification will not be displayed, but will be included in the history
+#    summary = "foobar"
+#    skip_display = yes
+
+#[signed_on]
+#    appname = Pidgin
+#    summary = "*signed on*"
+#    urgency = low
+#
+#[signed_off]
+#    appname = Pidgin
+#    summary = *signed off*
+#    urgency = low
+#
+#[says]
+#    appname = Pidgin
+#    summary = *says*
+#    urgency = critical
+#
+#[twitter]
+#    appname = Pidgin
+#    summary = *twitter.com*
+#    urgency = normal
+#
+#[stack-volumes]
+#    appname = "some_volume_notifiers"
+#    set_stack_tag = "volume"
+#
+# vim: ft=cfg

.config/dunst/launch_dunst.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+
+# Get values from Xresources
+config=~/.config/dunst/dunstrc
+geometry_x=$(xgetres dunst.geometry-x)
+geometry_y=$(xgetres dunst.geometry-y)
+separator_height=$(xgetres dunst.sep-height)
+padding=$(xgetres dunst.padding)
+horizontal_padding=$(xgetres dunst.horiz-padding)
+max_icon_size=$(xgetres dunst.max-icon-size)
+frame_width=$(xgetres dunst.frame-width)
+lb=$(xgetres dunst.low-background)
+lf=$(xgetres dunst.low-foreground)
+lfr=$(xgetres dunst.low-frame)
+nb=$(xgetres dunst.normal-background)
+nf=$(xgetres dunst.normal-foreground)
+nfr=$(xgetres dunst.normal-frame)
+cb=$(xgetres dunst.critical-background)
+cf=$(xgetres dunst.critical-foreground)
+cfr=$(xgetres dunst.critical-frame)
+
+# Kill and running dunst instances and start
+killall dunst;/usr/bin/dunst -config $config \
+    -geometry "0x0-$geometry_x+$geometry_y" \
+    -separator_height "$separator_height" \
+    -padding "$padding" \
+    -horizontal_padding "$horizontal_padding" \
+    -max_icon_size "$max_icon_size" \
+    -frame_width "$frame_width" \
+    -lb "$lb" \
+    -lf "$lf" \
+    -lfr "$lfr" \
+    -nb "$nb" \
+    -nf "$nf" \
+    -nfr "$nfr" \
+    -cb "$cb" \
+    -cf "$cf" \
+    -cfr "$cfr"

.config/dwm

@@ -0,0 +1 @@
+Subproject commit 8e4f659772b7b4e99abe2efb30ad1192fd8da4de

.config/fish/conf.d/dracula.fish

@@ -0,0 +1,33 @@
+# Dracula Color Palette
+set -l foreground f8f8f2
+set -l selection 44475a
+set -l comment 6272a4
+set -l red ff5555
+set -l orange ffb86c
+set -l yellow f1fa8c
+set -l green 50fa7b
+set -l purple bd93f9
+set -l cyan 8be9fd
+set -l pink ff79c6
+
+# Syntax Highlighting Colors
+set -g fish_color_normal $foreground
+set -g fish_color_command $cyan
+set -g fish_color_quote $yellow
+set -g fish_color_redirection $foreground
+set -g fish_color_end $orange
+set -g fish_color_error $red
+set -g fish_color_param $purple
+set -g fish_color_comment $comment
+set -g fish_color_match --background=$selection
+set -g fish_color_selection --background=$selection
+set -g fish_color_search_match --background=$selection
+set -g fish_color_operator $green
+set -g fish_color_escape $pink
+set -g fish_color_autosuggestion $comment
+
+# Completion Pager Colors
+set -g fish_pager_color_progress $comment
+set -g fish_pager_color_prefix $cyan
+set -g fish_pager_color_completion $foreground
+set -g fish_pager_color_description $comment

.config/fish/config.fish

@@ -1,13 +1,40 @@
-fish_config theme choose "Dracula_Official"
+############
-
+# GREETING #
+############
 function fish_greeting
-    clear
+    # Indices of colorscripts that don't block prompt
-    krabby random
+    set colorscript_indices 2 3 5 6 7 13 14 15 16 17 18 19 20 21 22 23 25 26 27 28 29 30 31 36 37 38 39 40 41 43 44 46 47 48 49 50 51
+    # Get length of array
+    set length (count $colorscript_indices)
+    # Randomly select array index
+    set i (math (random) % $length + 1)
+    # Output randomly selected colorscript from approved list
+    colorscript -e $colorscript_indices[$i]
+    # Output swimming fish string
     echo "¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>"
 end
 
+#############
+# VARIABLES #
+#############
 set -U fish_user_paths $fish_user_paths $HOME/.local/bin/
 
+###########
+# ALIASES #
+###########
+# pacman and paru
+alias pacsyu='sudo pacman -Syyu' # update only standard pkgs
+alias parusua='paru -Sua --noconfirm' # update only AUR pkgs
+alias parusyu='paru -Syu --noconfirm' # update standard pkgs and AUR pkgs
+alias unlock='sudo rm /var/lib/pacman/db.lck' # remove pacman lock
+alias cleanup='sudo pacman -Rns (pacman -Qtdq)' # remove orphaned packages
+
+# get fastest mirrors
+alias mirror="sudo reflector -f 30 -l 30 --number 10 --verbose --save /etc/pacman.d/mirrorlist"
+alias mirrord="sudo reflector --latest 50 --number 20 --sort delay --save /etc/pacman.d/mirrorlist"
+alias mirrors="sudo reflector --latest 50 --number 20 --sort score --save /etc/pacman.d/mirrorlist"
+alias mirrora="sudo reflector --latest 50 --number 20 --sort age --save /etc/pacman.d/mirrorlist"
+
 # Colorize grep output (good for log files)
 alias grep='grep --color=auto'
 alias egrep='egrep --color=auto'
@@ -18,10 +45,21 @@ alias cp="cp -i"
 alias mv='mv -i'
 alias rm='rm -i'
 
-# Replace ls and tree with eza
+# gpg encryption
-alias ls="eza"
+# verify signature for isos
-alias tree="eza -T"
+alias gpg-check="gpg2 --keyserver-options auto-key-retrieve --verify"
+# receive the key of a developer
+alias gpg-retrieve="gpg2 --keyserver-options auto-key-retrieve --receive-keys"
 
+# bare git repo alias for dotfiles
+alias config="GIT_WORK_TREE=~ GIT_DIR=~/.cfg"
+
+# ssh fix for kitty terminal
+alias ssh="kitty +kitten ssh"
+
+#######
+# TTY #
+#######
 if [ "$TERM" = "linux" ]
     then
     printf %b '\e[40m' '\e[8]' # set default background to color 0 'dracula-bg'
@@ -45,12 +83,8 @@ if [ "$TERM" = "linux" ]
     clear
 end
 
+##########
+# PROMPT #
+##########
 # Starship Prompt
 starship init fish | source
-
-if status is-interactive
-and not set -q TMUX
-    tmux new-session
-end
-
-direnv hook fish | source

.config/gamemode.ini

@@ -23,9 +23,7 @@ softrealtime=off
 
 ; GameMode can renice game processes. You can put any value between 0 and 20 here, the value
 ; will be negated and applied as a nice value (0 means no change). Defaults to 0.
-; To use this feature, the user must be added to the gamemode group (and then rebooted):
+renice=0
-; sudo usermod -aG gamemode $(whoami)
-renice=10
 
 ; By default, GameMode adjusts the iopriority of clients to BE/0, you can put any value
 ; between 0 and 7 here (with 0 being highest priority), or one of the special values
@@ -37,10 +35,6 @@ ioprio=0
 ; Defaults to 1
 inhibit_screensaver=1
 
-; Sets whether gamemode will disable split lock mitigation when active
-; Defaults to 1
-disable_splitlock=1
-
 [filter]
 ; If "whitelist" entry has a value(s)
 ; gamemode will reject anything not in the whitelist
@@ -81,15 +75,6 @@ disable_splitlock=1
 ; This corresponds to power_dpm_force_performance_level, "manual" is not supported for now
 ;amd_performance_level=high
 
-[cpu]
-; Parking or Pinning can be enabled with either "yes", "true" or "1" and disabled with "no", "false" or "0".
-; Either can also be set to a specific list of cores to park or pin, comma separated list where "-" denotes
-; a range. E.g "park_cores=1,8-15" would park cores 1 and 8 to 15.
-; The default is uncommented is to disable parking but enable pinning. If either is enabled the code will
-; currently only properly autodetect Ryzen 7900x3d, 7950x3d and Intel CPU:s with E- and P-cores.
-;park_cores=no
-;pin_cores=yes
-
 [supervisor]
 ; This section controls the new gamemode functions gamemode_request_start_for and gamemode_request_end_for
 ; The whilelist and blacklist control which supervisor programs are allowed to make the above requests
@@ -103,10 +88,10 @@ disable_splitlock=1
 [custom]
 ; Custom scripts (executed using the shell) when gamemode starts and ends
 ;start=notify-send "GameMode started"
-;    /home/me/bin/stop_foldingathome.sh
+;    /home/me/bin/stop_ethmining.sh
 
 ;end=notify-send "GameMode ended"
-;    /home/me/bin/start_foldingathome.sh
+;    /home/me/bin/start_ethmining.sh
 
 ; Timeout for scripts (seconds). Scripts will be killed if they do not complete within this time.
 ;script_timeout=10

.config/greenclip.cfg

@@ -0,0 +1,10 @@
+Config {
+    maxHistoryLength = 50,
+    historyPath = "~/.cache/greenclip.history",
+    staticHistoryPath = "~/.cache/greenclip.staticHistory",
+    imageCachePath = "/tmp/greenclip/",
+    usePrimarySelectionAsInput = False,
+    blacklistedApps = [],
+    trimSpaceFromSelection = True,
+    enableImageSupport = True
+}

.config/kitty/dracula.conf

@@ -60,7 +60,3 @@ inactive_tab_background #6272a4
 # Marks
 mark1_foreground #282a36
 mark1_background #ff5555
-
-# Splits/Windows
-active_border_color #f8f8f2
-inactive_border_color #6272a4

.config/kitty/kitty.conf

@@ -1,13 +1,15 @@
+# vim:fileencoding=utf-8:ft=conf:foldmethod=marker
+
 #: Fonts {{{
 
 #: kitty has very powerful font management. You can configure
 #: individual font faces and even specify special fonts for particular
 #: characters.
 
-font_family      MonaspiceNe NFM
+font_family      Fira Code Regular Nerd Font Complete
-bold_font        MonaspiceNe NFM Bold
+bold_font        Fira Code Bold Nerd Font Complete
-italic_font      MonaspiceNe NFM Italic
+italic_font      Fira Code Regular Nerd Font Complete
-bold_italic_font MonaspiceNe NFM Bold Italic
+bold_italic_font Fira Code Bold Nerd Font Complete
 
 #: You can specify different fonts for the bold/italic/bold-italic
 #: variants. To get a full list of supported fonts use the `kitty
@@ -425,7 +427,7 @@ window_resize_step_lines 2
 #: resizing windows. The cells value is used for horizontal resizing
 #: and the lines value for vertical resizing.
 
-window_border_width 0.5
+window_border_width 0.5pt
 
 #: The width of window borders. Can be either in pixels (px) or pts
 #: (pt). Values in pts will be rounded to the nearest number of pixels
@@ -761,7 +763,7 @@ mark3_background #f274bc
 
 #: Advanced {{{
 
-shell fish
+shell .
 
 #: The shell program to execute. The default value of . means to use
 #: whatever shell is set as the default shell for the current user.
@@ -1027,8 +1029,6 @@ clear_all_shortcuts no
 #: kitty +kitten hints --hints-offset to zero for all mappings,
 #: including the builtin ones.
 
-#: }}}
-
 #: Clipboard {{{
 
 map kitty_mod+c copy_to_clipboard
@@ -1309,4 +1309,6 @@ map kitty_mod+delete clear_terminal reset active
 
 #: }}}
 
+# }}}
+
 include dracula.conf

.config/matplotlib/matplotlibrc

@@ -0,0 +1,30 @@
+lines.color: F8F8F2
+patch.edgecolor: F8F8F2
+
+text.color: F8F8F2
+
+axes.facecolor: 282A36
+axes.edgecolor: F8F8F2
+axes.labelcolor: F8F8F2
+
+axes.prop_cycle: cycler('color', ['8be9fd', 'ff79c6', '50fa7b', 'bd93f9', 'ffb86c', 'ff5555', 'f1fa8c', '6272a4'])
+
+xtick.color: F8F8F2
+ytick.color: F8F8F2
+
+legend.framealpha: 0
+
+grid.color: F8F8F2
+
+figure.facecolor: 282A36
+figure.edgecolor: 282A36
+
+savefig.facecolor: 282A36
+savefig.edgecolor: 282A36
+
+### Boxplots
+boxplot.boxprops.color: F8F8F2
+boxplot.capprops.color: F8F8F2
+boxplot.flierprops.color: F8F8F2
+boxplot.flierprops.markeredgecolor: F8F8F2
+boxplot.whiskerprops.color: F8F8F2

.config/matplotlib/stylelib/dracula.mplstyle

@@ -0,0 +1,30 @@
+lines.color: F8F8F2
+patch.edgecolor: F8F8F2
+
+text.color: F8F8F2
+
+axes.facecolor: 282A36
+axes.edgecolor: F8F8F2
+axes.labelcolor: F8F8F2
+
+axes.prop_cycle: cycler('color', ['8be9fd', 'ff79c6', '50fa7b', 'bd93f9', 'ffb86c', 'ff5555', 'f1fa8c', '6272a4'])
+
+xtick.color: F8F8F2
+ytick.color: F8F8F2
+
+legend.framealpha: 0
+
+grid.color: F8F8F2
+
+figure.facecolor: 282A36
+figure.edgecolor: 282A36
+
+savefig.facecolor: 282A36
+savefig.edgecolor: 282A36
+
+### Boxplots
+boxplot.boxprops.color: F8F8F2
+boxplot.capprops.color: F8F8F2
+boxplot.flierprops.color: F8F8F2
+boxplot.flierprops.markeredgecolor: F8F8F2
+boxplot.whiskerprops.color: F8F8F2

.config/multilock/config

@@ -0,0 +1,45 @@
+# default options
+display_on=0
+span_image=false
+lock_timeout=300
+fx_list=(dim blur dimblur pixel dimpixel color)
+dim_level=40
+blur_level=1
+pixel_scale=10,1000
+solid_color=333333
+
+# # default theme options
+# loginbox=00000066
+# loginshadow=00000000
+# locktext="Type password to unlock..."
+# font="sans-serif"
+# ringcolor=ffffffff
+# insidecolor=00000000
+# separatorcolor=00000000
+# ringvercolor=ffffffff
+# insidevercolor=00000000
+# ringwrongcolor=ffffffff
+# insidewrongcolor=d23c3dff
+# keyhlcolor=d23c3dff
+# bshlcolor=d23c3dff
+# verifcolor=ffffffff
+# timecolor=ffffffff
+# datecolor=ffffffff
+
+# Dracula theme options
+loginbox=282a3666
+loginshadow=282a3600
+locktext="Type password to unlock..."
+font="sans-serif"
+ringcolor=8be9fdff
+insidecolor=00000000
+separatorcolor=00000000
+ringvercolor=50fa7bff
+insidevercolor=50fa7bff
+ringwrongcolor=ff5555ff
+insidewrongcolor=ff5555ff
+keyhlcolor=bd93f9ff
+bshlcolor=bd93f9ff
+verifcolor=ffffffff
+timecolor=f8f8f2ff
+datecolor=f8f8f2ff

.config/neofetch/config.conf

@@ -0,0 +1,847 @@
+# See this wiki page for more info:
+# https://github.com/dylanaraps/neofetch/wiki/Customizing-Info
+print_info() {
+    info title
+    info underline
+
+    info "OS" distro
+    info "Host" model
+    info "Kernel" kernel
+    info "Uptime" uptime
+    info "Packages" packages
+    info "Shell" shell
+    info "Resolution" resolution
+    info "DE" de
+    info "WM" wm
+    info "WM Theme" wm_theme
+    info "Theme" theme
+    info "Icons" icons
+    info "Terminal" term
+    info "Terminal Font" term_font
+    info "CPU" cpu
+    info "GPU" gpu
+    info "Memory" memory
+    info "GPU Driver" gpu_driver  # Linux/macOS only
+    # info "CPU Usage" cpu_usage
+    # info "Disk" disk
+    info "Battery" battery
+    info "Font" font
+    # info "Song" song
+    # [[ "$player" ]] && prin "Music Player" "$player"
+    # info "Local IP" local_ip
+    # info "Public IP" public_ip
+    # info "Users" users
+    # info "Locale" locale  # This only works on glibc systems.
+    # info cols
+}
+
+# Title
+
+
+# Hide/Show Fully qualified domain name.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --title_fqdn
+title_fqdn="off"
+
+
+# Kernel
+
+
+# Shorten the output of the kernel function.
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --kernel_shorthand
+# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
+#
+# Example:
+# on:  '4.8.9-1-ARCH'
+# off: 'Linux 4.8.9-1-ARCH'
+kernel_shorthand="on"
+
+
+# Distro
+
+
+# Shorten the output of the distro function
+#
+# Default:  'off'
+# Values:   'on', 'tiny', 'off'
+# Flag:     --distro_shorthand
+# Supports: Everything except Windows and Haiku
+distro_shorthand="off"
+
+# Show/Hide OS Architecture.
+# Show 'x86_64', 'x86' and etc in 'Distro:' output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --os_arch
+#
+# Example:
+# on:  'Arch Linux x86_64'
+# off: 'Arch Linux'
+os_arch="on"
+
+
+# Uptime
+
+
+# Shorten the output of the uptime function
+#
+# Default: 'on'
+# Values:  'on', 'tiny', 'off'
+# Flag:    --uptime_shorthand
+#
+# Example:
+# on:   '2 days, 10 hours, 3 mins'
+# tiny: '2d 10h 3m'
+# off:  '2 days, 10 hours, 3 minutes'
+uptime_shorthand="on"
+
+
+# Memory
+
+
+# Show memory pecentage in output.
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --memory_percent
+#
+# Example:
+# on:   '1801MiB / 7881MiB (22%)'
+# off:  '1801MiB / 7881MiB'
+memory_percent="on"
+
+
+# Packages
+
+
+# Show/Hide Package Manager names.
+#
+# Default: 'tiny'
+# Values:  'on', 'tiny' 'off'
+# Flag:    --package_managers
+#
+# Example:
+# on:   '998 (pacman), 8 (flatpak), 4 (snap)'
+# tiny: '908 (pacman, flatpak, snap)'
+# off:  '908'
+package_managers="on"
+
+
+# Shell
+
+
+# Show the path to $SHELL
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --shell_path
+#
+# Example:
+# on:  '/bin/bash'
+# off: 'bash'
+shell_path="off"
+
+# Show $SHELL version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --shell_version
+#
+# Example:
+# on:  'bash 4.4.5'
+# off: 'bash'
+shell_version="on"
+
+
+# CPU
+
+
+# CPU speed type
+#
+# Default: 'bios_limit'
+# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
+# Flag:    --speed_type
+# Supports: Linux with 'cpufreq'
+# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
+speed_type="bios_limit"
+
+# CPU speed shorthand
+#
+# Default: 'off'
+# Values: 'on', 'off'.
+# Flag:    --speed_shorthand
+# NOTE: This flag is not supported in systems with CPU speed less than 1 GHz
+#
+# Example:
+# on:    'i7-6500U (4) @ 3.1GHz'
+# off:   'i7-6500U (4) @ 3.100GHz'
+speed_shorthand="off"
+
+# Enable/Disable CPU brand in output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_brand
+#
+# Example:
+# on:   'Intel i7-6500U'
+# off:  'i7-6500U (4)'
+cpu_brand="on"
+
+# CPU Speed
+# Hide/Show CPU speed.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_speed
+#
+# Example:
+# on:  'Intel i7-6500U (4) @ 3.1GHz'
+# off: 'Intel i7-6500U (4)'
+cpu_speed="on"
+
+# CPU Cores
+# Display CPU cores in output
+#
+# Default: 'logical'
+# Values:  'logical', 'physical', 'off'
+# Flag:    --cpu_cores
+# Support: 'physical' doesn't work on BSD.
+#
+# Example:
+# logical:  'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
+# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
+# off:      'Intel i7-6500U @ 3.1GHz'
+cpu_cores="logical"
+
+# CPU Temperature
+# Hide/Show CPU temperature.
+# Note the temperature is added to the regular CPU function.
+#
+# Default: 'off'
+# Values:  'C', 'F', 'off'
+# Flag:    --cpu_temp
+# Supports: Linux, BSD
+# NOTE: For FreeBSD and NetBSD-based systems, you'll need to enable
+#       coretemp kernel module. This only supports newer Intel processors.
+#
+# Example:
+# C:   'Intel i7-6500U (4) @ 3.1GHz [27.2°C]'
+# F:   'Intel i7-6500U (4) @ 3.1GHz [82.0°F]'
+# off: 'Intel i7-6500U (4) @ 3.1GHz'
+cpu_temp="F"
+
+
+# GPU
+
+
+# Enable/Disable GPU Brand
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gpu_brand
+#
+# Example:
+# on:  'AMD HD 7950'
+# off: 'HD 7950'
+gpu_brand="on"
+
+# Which GPU to display
+#
+# Default: 'all'
+# Values:  'all', 'dedicated', 'integrated'
+# Flag:    --gpu_type
+# Supports: Linux
+#
+# Example:
+# all:
+#   GPU1: AMD HD 7950
+#   GPU2: Intel Integrated Graphics
+#
+# dedicated:
+#   GPU1: AMD HD 7950
+#
+# integrated:
+#   GPU1: Intel Integrated Graphics
+gpu_type="all"
+
+
+# Resolution
+
+
+# Display refresh rate next to each monitor
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --refresh_rate
+# Supports: Doesn't work on Windows.
+#
+# Example:
+# on:  '1920x1080 @ 60Hz'
+# off: '1920x1080'
+refresh_rate="on"
+
+
+# Gtk Theme / Icons / Font
+
+
+# Shorten output of GTK Theme / Icons / Font
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --gtk_shorthand
+#
+# Example:
+# on:  'Numix, Adwaita'
+# off: 'Numix [GTK2], Adwaita [GTK3]'
+gtk_shorthand="off"
+
+
+# Enable/Disable gtk2 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk2
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Adwaita [GTK3]'
+gtk2="on"
+
+# Enable/Disable gtk3 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk3
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Numix [GTK2]'
+gtk3="on"
+
+
+# IP Address
+
+
+# Website to ping for the public IP
+#
+# Default: 'http://ident.me'
+# Values:  'url'
+# Flag:    --ip_host
+public_ip_host="http://ident.me"
+
+# Public IP timeout.
+#
+# Default: '2'
+# Values:  'int'
+# Flag:    --ip_timeout
+public_ip_timeout=2
+
+
+# Desktop Environment
+
+
+# Show Desktop Environment version
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --de_version
+de_version="on"
+
+
+# Disk
+
+
+# Which disks to display.
+# The values can be any /dev/sdXX, mount point or directory.
+# NOTE: By default we only show the disk info for '/'.
+#
+# Default: '/'
+# Values:  '/', '/dev/sdXX', '/path/to/drive'.
+# Flag:    --disk_show
+#
+# Example:
+# disk_show=('/' '/dev/sdb1'):
+#      'Disk (/): 74G / 118G (66%)'
+#      'Disk (/mnt/Videos): 823G / 893G (93%)'
+#
+# disk_show=('/'):
+#      'Disk (/): 74G / 118G (66%)'
+#
+disk_show=('/')
+
+# Disk subtitle.
+# What to append to the Disk subtitle.
+#
+# Default: 'mount'
+# Values:  'mount', 'name', 'dir', 'none'
+# Flag:    --disk_subtitle
+#
+# Example:
+# name:   'Disk (/dev/sda1): 74G / 118G (66%)'
+#         'Disk (/dev/sdb2): 74G / 118G (66%)'
+#
+# mount:  'Disk (/): 74G / 118G (66%)'
+#         'Disk (/mnt/Local Disk): 74G / 118G (66%)'
+#         'Disk (/mnt/Videos): 74G / 118G (66%)'
+#
+# dir:    'Disk (/): 74G / 118G (66%)'
+#         'Disk (Local Disk): 74G / 118G (66%)'
+#         'Disk (Videos): 74G / 118G (66%)'
+#
+# none:   'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+#         'Disk: 74G / 118G (66%)'
+disk_subtitle="mount"
+
+# Disk percent.
+# Show/Hide disk percent.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --disk_percent
+#
+# Example:
+# on:  'Disk (/): 74G / 118G (66%)'
+# off: 'Disk (/): 74G / 118G'
+disk_percent="on"
+
+
+# Song
+
+
+# Manually specify a music player.
+#
+# Default: 'auto'
+# Values:  'auto', 'player-name'
+# Flag:    --music_player
+#
+# Available values for 'player-name':
+#
+# amarok
+# audacious
+# banshee
+# bluemindo
+# clementine
+# cmus
+# deadbeef
+# deepin-music
+# dragon
+# elisa
+# exaile
+# gnome-music
+# gmusicbrowser
+# gogglesmm
+# guayadeque
+# io.elementary.music
+# iTunes
+# juk
+# lollypop
+# mocp
+# mopidy
+# mpd
+# muine
+# netease-cloud-music
+# pogo
+# pragha
+# qmmp
+# quodlibet
+# rhythmbox
+# sayonara
+# smplayer
+# spotify
+# strawberry
+# tomahawk
+# vlc
+# xmms2d
+# xnoise
+# yarock
+music_player="auto"
+
+# Format to display song information.
+#
+# Default: '%artist% - %album% - %title%'
+# Values:  '%artist%', '%album%', '%title%'
+# Flag:    --song_format
+#
+# Example:
+# default: 'Song: Jet - Get Born - Sgt Major'
+song_format="%artist% - %album% - %title%"
+
+# Print the Artist, Album and Title on separate lines
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --song_shorthand
+#
+# Example:
+# on:  'Artist: The Fratellis'
+#      'Album: Costello Music'
+#      'Song: Chelsea Dagger'
+#
+# off: 'Song: The Fratellis - Costello Music - Chelsea Dagger'
+song_shorthand="off"
+
+# 'mpc' arguments (specify a host, password etc).
+#
+# Default:  ''
+# Example: mpc_args=(-h HOST -P PASSWORD)
+mpc_args=()
+
+
+# Text Colors
+
+
+# Text Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --colors
+#
+# Each number represents a different part of the text in
+# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
+#
+# Example:
+# colors=(distro)      - Text is colored based on Distro colors.
+# colors=(4 6 1 8 8 6) - Text is colored in the order above.
+colors=(distro)
+
+
+# Text Options
+
+
+# Toggle bold text
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bold
+bold="on"
+
+# Enable/Disable Underline
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --underline
+underline_enabled="on"
+
+# Underline character
+#
+# Default:  '-'
+# Values:   'string'
+# Flag:     --underline_char
+underline_char="-"
+
+
+# Info Separator
+# Replace the default separator with the specified string.
+#
+# Default:  ':'
+# Flag:     --separator
+#
+# Example:
+# separator="->":   'Shell-> bash'
+# separator=" =":   'WM = dwm'
+separator=":"
+
+
+# Color Blocks
+
+
+# Color block range
+# The range of colors to print.
+#
+# Default:  '0', '15'
+# Values:   'num'
+# Flag:     --block_range
+#
+# Example:
+#
+# Display colors 0-7 in the blocks.  (8 colors)
+# neofetch --block_range 0 7
+#
+# Display colors 0-15 in the blocks. (16 colors)
+# neofetch --block_range 0 15
+block_range=(0 15)
+
+# Toggle color blocks
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --color_blocks
+color_blocks="on"
+
+# Color block width in spaces
+#
+# Default:  '3'
+# Values:   'num'
+# Flag:     --block_width
+block_width=3
+
+# Color block height in lines
+#
+# Default:  '1'
+# Values:   'num'
+# Flag:     --block_height
+block_height=1
+
+# Color Alignment
+#
+# Default: 'auto'
+# Values: 'auto', 'num'
+# Flag: --col_offset
+#
+# Number specifies how far from the left side of the terminal (in spaces) to
+# begin printing the columns, in case you want to e.g. center them under your
+# text.
+# Example:
+# col_offset="auto" - Default behavior of neofetch
+# col_offset=7      - Leave 7 spaces then print the colors
+col_offset="auto"
+
+# Progress Bars
+
+
+# Bar characters
+#
+# Default:  '-', '='
+# Values:   'string', 'string'
+# Flag:     --bar_char
+#
+# Example:
+# neofetch --bar_char 'elapsed' 'total'
+# neofetch --bar_char '-' '='
+bar_char_elapsed="-"
+bar_char_total="="
+
+# Toggle Bar border
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bar_border
+bar_border="on"
+
+# Progress bar length in spaces
+# Number of chars long to make the progress bars.
+#
+# Default:  '15'
+# Values:   'num'
+# Flag:     --bar_length
+bar_length=15
+
+# Progress bar colors
+# When set to distro, uses your distro's logo colors.
+#
+# Default:  'distro', 'distro'
+# Values:   'distro', 'num'
+# Flag:     --bar_colors
+#
+# Example:
+# neofetch --bar_colors 3 4
+# neofetch --bar_colors distro 5
+bar_color_elapsed="distro"
+bar_color_total="distro"
+
+
+# Info display
+# Display a bar with the info.
+#
+# Default: 'off'
+# Values:  'bar', 'infobar', 'barinfo', 'off'
+# Flags:   --cpu_display
+#          --memory_display
+#          --battery_display
+#          --disk_display
+#
+# Example:
+# bar:     '[---=======]'
+# infobar: 'info [---=======]'
+# barinfo: '[---=======] info'
+# off:     'info'
+cpu_display="off"
+memory_display="off"
+battery_display="off"
+disk_display="off"
+
+
+# Backend Settings
+
+
+# Image backend.
+#
+# Default:  'ascii'
+# Values:   'ascii', 'caca', 'chafa', 'jp2a', 'iterm2', 'off',
+#           'termpix', 'pixterm', 'tycat', 'w3m', 'kitty'
+# Flag:     --backend
+image_backend="ascii"
+
+# Image Source
+#
+# Which image or ascii file to display.
+#
+# Default:  'auto'
+# Values:   'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
+#           'command output (neofetch --ascii "$(fortune | cowsay -W 30)")'
+# Flag:     --source
+#
+# NOTE: 'auto' will pick the best image source for whatever image backend is used.
+#       In ascii mode, distro ascii art will be used and in an image mode, your
+#       wallpaper will be used.
+image_source="auto"
+
+
+# Ascii Options
+
+
+# Ascii distro
+# Which distro's ascii art to display.
+#
+# Default: 'auto'
+# Values:  'auto', 'distro_name'
+# Flag:    --ascii_distro
+# NOTE: AIX, Alpine, Anarchy, Android, Antergos, antiX, AOSC,
+#       Apricity, ArcoLinux, ArchBox, ARCHlabs, ArchStrike,
+#       XFerience, ArchMerge, Arch, Artix, Arya, Bedrock, Bitrig,
+#       BlackArch, BLAG, BlankOn, BlueLight, bonsai, BSD,
+#       BunsenLabs, Calculate, Carbs, CentOS, Chakra, ChaletOS,
+#       Chapeau, Chrom*, Cleanjaro, ClearOS, Clear_Linux, Clover,
+#       Condres, Container_Linux, CRUX, Cucumber, Debian, Deepin,
+#       DesaOS, Devuan, DracOS, DragonFly, Drauger, Elementary,
+#       EndeavourOS, Endless, EuroLinux, Exherbo, Fedora, Feren, FreeBSD,
+#       FreeMiNT, Frugalware, Funtoo, GalliumOS, Gentoo, Pentoo,
+#       gNewSense, GNU, GoboLinux, Grombyang, Guix, Haiku, Huayra,
+#       Hyperbola, janus, Kali, KaOS, KDE_neon, Kibojoe, Kogaion,
+#       Korora, KSLinux, Kubuntu, LEDE, LFS, Linux_Lite,
+#       LMDE, Lubuntu, Lunar, macos, Mageia, MagpieOS, Mandriva,
+#       Manjaro, Maui, Mer, Minix, LinuxMint, MX_Linux, Namib,
+#       Neptune, NetBSD, Netrunner, Nitrux, NixOS, Nurunner,
+#       NuTyX, OBRevenge, OpenBSD, OpenIndiana, OpenMandriva,
+#       OpenWrt, osmc, Oracle, PacBSD, Parabola, Pardus, Parrot,
+#       Parsix, TrueOS, PCLinuxOS, Peppermint, popos, Porteus,
+#       PostMarketOS, Proxmox, Puppy, PureOS, Qubes, Radix, Raspbian,
+#       Reborn_OS, Redstar, Redcore, Redhat, Refracted_Devuan, Regata,
+#       Rosa, sabotage, Sabayon, Sailfish, SalentOS, Scientific, Septor,
+#       SharkLinux, Siduction, Slackware, SliTaz, SmartOS, Solus,
+#       Source_Mage, Sparky, Star, SteamOS, SunOS, openSUSE_Leap,
+#       openSUSE_Tumbleweed, openSUSE, SwagArch, Tails, Trisquel,
+#       Ubuntu-Budgie, Ubuntu-GNOME, Ubuntu-MATE, Ubuntu-Studio, Ubuntu,
+#       Void, Obarun, windows10, Windows7, Xubuntu, Zorin, and IRIX
+#       have ascii logos
+# NOTE: Arch, Ubuntu, Redhat, and Dragonfly have 'old' logo variants.
+#       Use '{distro name}_old' to use the old logos.
+# NOTE: Ubuntu has flavor variants.
+#       Change this to Lubuntu, Kubuntu, Xubuntu, Ubuntu-GNOME,
+#       Ubuntu-Studio, Ubuntu-Mate  or Ubuntu-Budgie to use the flavors.
+# NOTE: Arcolinux, Dragonfly, Fedora, Alpine, Arch, Ubuntu,
+#       CRUX, Debian, Gentoo, FreeBSD, Mac, NixOS, OpenBSD, android,
+#       Antrix, CentOS, Cleanjaro, ElementaryOS, GUIX, Hyperbola,
+#       Manjaro, MXLinux, NetBSD, Parabola, POP_OS, PureOS,
+#       Slackware, SunOS, LinuxLite, OpenSUSE, Raspbian,
+#       postmarketOS, and Void have a smaller logo variant.
+#       Use '{distro name}_small' to use the small variants.
+ascii_distro="auto"
+
+# Ascii Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --ascii_colors
+#
+# Example:
+# ascii_colors=(distro)      - Ascii is colored based on Distro colors.
+# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
+ascii_colors=(distro)
+
+# Bold ascii logo
+# Whether or not to bold the ascii logo.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --ascii_bold
+ascii_bold="on"
+
+
+# Image Options
+
+
+# Image loop
+# Setting this to on will make neofetch redraw the image constantly until
+# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --loop
+image_loop="off"
+
+# Thumbnail directory
+#
+# Default: '~/.cache/thumbnails/neofetch'
+# Values:  'dir'
+thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
+
+# Crop mode
+#
+# Default:  'normal'
+# Values:   'normal', 'fit', 'fill'
+# Flag:     --crop_mode
+#
+# See this wiki page to learn about the fit and fill options.
+# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
+crop_mode="normal"
+
+# Crop offset
+# Note: Only affects 'normal' crop mode.
+#
+# Default:  'center'
+# Values:   'northwest', 'north', 'northeast', 'west', 'center'
+#           'east', 'southwest', 'south', 'southeast'
+# Flag:     --crop_offset
+crop_offset="center"
+
+# Image size
+# The image is half the terminal width by default.
+#
+# Default: 'auto'
+# Values:  'auto', '00px', '00%', 'none'
+# Flags:   --image_size
+#          --size
+image_size="auto"
+
+# Gap between image and text
+#
+# Default: '3'
+# Values:  'num', '-num'
+# Flag:    --gap
+gap=3
+
+# Image offsets
+# Only works with the w3m backend.
+#
+# Default: '0'
+# Values:  'px'
+# Flags:   --xoffset
+#          --yoffset
+yoffset=0
+xoffset=0
+
+# Image background color
+# Only works with the w3m backend.
+#
+# Default: ''
+# Values:  'color', 'blue'
+# Flag:    --bg_color
+background_color=
+
+
+# Misc Options
+
+# Stdout mode
+# Turn off all colors and disables image backend (ASCII/Image).
+# Useful for piping into another command.
+# Default: 'off'
+# Values: 'on', 'off'
+stdout="off"

.config/picom/picom.conf

@@ -1,3 +1,64 @@
+################################
+#          Animations           #
+#################################
+# requires https://github.com/jonaburg/picom
+
+# length of animation in milliseconds (default: 300)
+transition-length = 150;
+
+# animation easing on the x-axis (default: 0.1)
+transition-pow-x = 0.1;
+
+# animation easing on the y-axis (default: 0.1)
+transition-pow-y = 0.1;
+
+#animation easing on the window width (default: 0.1)
+transition-pow-w = 0.1;
+
+# animation easing on the window height (default: 0.1)
+transition-pow-h = 0.1;
+
+# whether to animate window size changes (default: true)
+size-transition = true;
+
+# whether to animate new windows from the center of the screen (default: false)
+spawn-center-screen = false;
+
+# whether to animate new windows from their own center (default: true)
+spawn-center = true;
+
+# Whether to animate down scaling (some programs handle this poorly) (default: false)
+no-scale-down = true;
+
+
+#################################
+#             Corners           #
+#################################
+# requires: https://github.com/sdhand/compton or https://github.com/jonaburg/picom
+corner-radius = 10.0;
+rounded-corners-exclude = [
+  # "window_type = 'normal'",
+  # "class_g = 'awesome'",
+  # "class_g = 'URxvt'",
+  # "class_g = 'XTerm'",
+  # "class_g = 'kitty'",
+  # "class_g = 'Alacritty'",
+  "class_g = 'Polybar'",
+  # "class_g = 'code-oss'",
+  #"class_g = 'TelegramDesktop'",
+  # "class_g = 'firefox'",
+  # "class_g = 'Thunderbird'"
+];
+round-borders = 1;
+round-borders-exclude = [
+  #"class_g = 'TelegramDesktop'",
+];
+
+
+#################################
+#             Shadows           #
+#################################
+
 # Enabled client-side shadows on windows. Note desktop windows 
 # (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow, 
 # unless explicitly requested using the wintypes option.
@@ -76,18 +137,26 @@ shadow-exclude = [
 # Crop shadow of a window fully on a particular Xinerama screen to the screen.
 # xinerama-shadow-crop = false
 
+
+#################################
+#           Fading              #
+#################################
+
 # Fade windows in/out when opening/closing and when opacity changes,
 #  unless no-fading-openclose is used.
+# fading = false
 fading = true;
 
 # Opacity change between steps while fading in. (0.01 - 1.0, defaults to 0.028)
-fade-in-step = 0.028;
+# fade-in-step = 0.028
+fade-in-step = 0.03;
 
 # Opacity change between steps while fading out. (0.01 - 1.0, defaults to 0.03)
-fade-out-step = 0.028;
+# fade-out-step = 0.03
+fade-out-step = 0.03;
 
 # The time between steps in fade step, in milliseconds. (> 0, defaults to 10)
-fade-delta = 3
+# fade-delta = 10
 
 # Specify a list of conditions of windows that should not be faded.
 # don't need this, we disable fading for all normal windows with wintypes: {}
@@ -96,27 +165,48 @@ fade-exclude = [
 ]
 
 # Do not fade on window open/close.
-no-fading-openclose = false
+# no-fading-openclose = false
+no-fading-openclose = true
 
 # Do not fade destroyed ARGB windows with WM frame. Workaround of bugs in Openbox, Fluxbox, etc.
 # no-fading-destroyed-argb = false
 
+
+#################################
+#   Transparency / Opacity      #
+#################################
+
 # Opacity of inactive windows. (0.1 - 1.0, defaults to 1.0)
-inactive-opacity = 1.0
+inactive-opacity = 1
+# inactive-opacity = 0.8;
 
 # Opacity of window titlebars and borders. (0.1 - 1.0, disabled by default)
 frame-opacity = 1.0
+# frame-opacity = 0.7;
+
+# Default opacity for dropdown menus and popup menus. (0.0 - 1.0, defaults to 1.0)
+# menu-opacity = 1.0 
+# menu-opacity is depreciated use dropdown-menu and popup-menu instead.
+
+#If using these 2 below change their values in line 530 & 531 aswell
+# popup_menu = { opacity = 0.8; }
+popup_menu = { opacity = 1.0; }
+# dropdown_menu = { opacity = 0.8; }
+dropdown_menu = { opacity = 1.0; }
+
 
 # Let inactive opacity set by -i override the '_NET_WM_OPACITY' values of windows.
+# inactive-opacity-override = true
 inactive-opacity-override = false;
 
 # Default opacity for active windows. (0.0 - 1.0, defaults to 1.0)
 active-opacity = 1.0;
 
 # Dim inactive windows. (0.0 - 1.0, defaults to 0.0)
-inactive-dim = 0.0
+# inactive-dim = 0.0
 
 # Specify a list of conditions of windows that should always be considered focused.
+# focus-exclude = []
 focus-exclude = [
   # "class_g = 'Cairo-clock'",
   # "class_g = 'Bar'",                    # lemonbar
@@ -150,46 +240,54 @@ opacity-rule = [
   # "100:class_g    = 'Thunderbird'"
 ];
 
-# Sets the radius of rounded window corners. When > 0, the compositor will
-# round the corners of windows. Does not interact well with
-# `transparent-clipping`.
-corner-radius = 10.0;
 
-# Exclude conditions for rounded corners.
+#################################
-rounded-corners-exclude = [
+#     Background-Blurring       #
-  "class_g = 'Polybar'",
+#################################
-  "class_g = 'Rofi'",
-  "class_g = 'Deadd-notification-center'",
-];
 
 # Parameters for background blurring, see the *BLUR* section for more information.
-blur-method = "dual_kawase";
+# blur-method = 
 # blur-size = 12
+#
 # blur-deviation = false
-blur-strength = 7;
 
 # Blur background of semi-transparent / ARGB windows. 
 # Bad in performance, with driver-dependent behavior. 
 # The name of the switch may change without prior notifications.
-blur-background = false;
+#
+# blur-background = true;
 
 # Blur background of windows when the window frame is not opaque. 
 # Implies:
 #    blur-background 
 # Bad in performance, with driver-dependent behavior. The name may change.
-
+#
-blur-background-frame = false;
+# blur-background-frame = false;
 
 
 # Use fixed blur strength rather than adjusting according to window opacity.
-blur-background-fixed = false;
+# blur-background-fixed = false;
 
 
 # Specify the blur convolution kernel, with the following format:
 # example:
 #   blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1";
-blur-kern = "3x3box";
+#
+# blur-kern = ''
+# blur-kern = "3x3box";
 
+blur: {
+  # requires: https://github.com/ibhagwan/picom
+  method = "kawase";
+  #method = "kernel";
+  strength = 7;
+  # deviation = 1.0;
+  # kernel = "11x11gaussian";
+  background = false;
+  background-frame = false;
+  background-fixed = false;
+  kern = "3x3box";
+}
 
 # Exclude conditions for background blur.
 blur-background-exclude = [
@@ -200,33 +298,32 @@ blur-background-exclude = [
   # prevents picom from blurring the background
   # when taking selection screenshot with `main`
   # https://github.com/naelstrof/maim/issues/130
-  "class_g = 'peek'",
-  "class_g = 'Peek'",
   "class_g = 'slop'",
-  "class_g = 'zoom'",
   "_GTK_FRAME_EXTENTS@:c"
 ];
 
-# Enable remote control via D-Bus. See the man page for more details.
+
-# dbus = true
+#################################
+#       General Settings        #
+#################################
 
 # Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers.
 # daemon = false
 
-# Specify the backend to use: `xrender`, `glx`, `egl` or `xr_glx_hybrid`.
+# Specify the backend to use: `xrender`, `glx`, or `xr_glx_hybrid`.
 # `xrender` is the default one.
 #
-# backend = "glx"
+experimental-backends = true;
 backend = "glx";
+#backend = "xrender";
 
-# Use higher precision during rendering, and apply dither when presenting the
-# rendered screen. Reduces banding artifacts, but might cause performance
-# degradation. Only works with OpenGL.
-dithered-present = false;
 
 # Enable/disable VSync.
 # vsync = false
-vsync = true;
+vsync = false
+
+# Enable remote control via D-Bus. See the *D-BUS API* section below for more details.
+# dbus = false
 
 # Try to detect WM windows (a non-override-redirect window with no 
 # child that has 'WM_STATE') and mark them as active.
@@ -244,12 +341,26 @@ mark-ovredir-focused = true;
 # detect-rounded-corners = false
 detect-rounded-corners = true;
 
-# Detect '_NET_WM_WINDOW_OPACITY' on client windows, useful for window managers
+# Detect '_NET_WM_OPACITY' on client windows, useful for window managers
-# not passing '_NET_WM_WINDOW_OPACITY' of client windows to frame windows.
+# not passing '_NET_WM_OPACITY' of client windows to frame windows.
 #
 # detect-client-opacity = false
 detect-client-opacity = true;
 
+# Specify refresh rate of the screen. If not specified or 0, picom will 
+# try detecting this with X RandR extension.
+#
+# refresh-rate = 60
+refresh-rate = 0
+
+# Limit picom to repaint at most once every 1 / 'refresh_rate' second to 
+# boost performance. This should not be used with 
+#   vsync drm/opengl/opengl-oml
+# as they essentially does sw-opti's job already, 
+# unless you wish to specify a lower refresh rate than the actual value.
+#
+# sw-opti = 
+
 # Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window, 
 # rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy, 
 # provided that the WM supports it.
@@ -258,7 +369,7 @@ detect-client-opacity = true;
 
 # Unredirect all windows if a full-screen opaque window is detected, 
 # to maximize performance for full-screen windows. Known to cause flickering 
-# when redirecting/unredirecting windows.
+# when redirecting/unredirecting windows. paint-on-overlay may make the flickering less obvious.
 #
 # unredir-if-possible = false
 
@@ -272,14 +383,14 @@ detect-client-opacity = true;
 # in the same group focused at the same time.
 #
 # detect-transient = false
-detect-transient = true;
+detect-transient = true
 
 # Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same 
-# group focused at the same time. This usually means windows from the same application
+# group focused at the same time. 'WM_TRANSIENT_FOR' has higher priority if 
-# will be considered focused or unfocused at the same time.
+# detect-transient is enabled, too.
-# 'WM_TRANSIENT_FOR' has higher priority if detect-transient is enabled, too.
 #
 # detect-client-leader = false
+detect-client-leader = true
 
 # Resize damaged region by a specific number of pixels. 
 # A positive value enlarges it while a negative one shrinks it. 
@@ -304,7 +415,7 @@ detect-transient = true;
 # practically happened) and may not work with blur-background. 
 # My tests show a 15% performance boost. Recommended.
 #
-glx-no-stencil = true;
+# glx-no-stencil = false
 
 # GLX backend: Avoid rebinding pixmap on window damage. 
 # Probably could improve performance on rapid window content changes, 
@@ -314,12 +425,14 @@ glx-no-stencil = true;
 # glx-no-rebind-pixmap = false
 
 # Disable the use of damage information. 
-# This cause the whole screen to be redrawn every time, instead of the part of the screen
+# This cause the whole screen to be redrawn everytime, instead of the part of the screen
 # has actually changed. Potentially degrades the performance, but might fix some artifacts.
 # The opposing option is use-damage
 #
 # no-use-damage = false
-use-damage = false;
+#use-damage = true (Causing Weird Black semi opaque rectangles when terminal is opened)
+#Changing use-damage to false fixes the problem
+use-damage = false
 
 # Use X Sync fence to sync clients' draw calls, to make sure all draw 
 # calls are finished before picom starts drawing. Needed on nvidia-drivers 
@@ -327,17 +440,11 @@ use-damage = false;
 #
 # xrender-sync-fence = false
 
-# GLX backend: Use specified GLSL fragment shader for rendering window
+# GLX backend: Use specified GLSL fragment shader for rendering window contents. 
-# contents. Read the man page for a detailed explanation of the interface.
+# See `compton-default-fshader-win.glsl` and `compton-fake-transparency-fshader-win.glsl` 
+# in the source tree for examples.
 #
-# window-shader-fg = "default"
+# glx-fshader-win = ''
-
-# Use rules to set per-window shaders. Syntax is SHADER_PATH:PATTERN, similar
-# to opacity-rule. SHADER_PATH can be "default". This overrides window-shader-fg.
-#
-# window-shader-fg-rule = [
-#   "my_shader.frag:window_type != 'dock'"
-# ]
 
 # Force all windows to be painted with blending. Useful if you 
 # have a glx-fshader-win that could turn opaque pixels transparent.
@@ -361,12 +468,6 @@ use-damage = false;
 #
 # transparent-clipping = false
 
-# Specify a list of conditions of windows that should never have transparent
-# clipping applied. Useful for screenshot tools, where you need to be able to
-# see through transparent parts of the window.
-#
-# transparent-clipping-exclude = []
-
 # Set the log level. Possible values are:
 #  "trace", "debug", "info", "warn", "error"
 # in increasing level of importance. Case doesn't matter. 
@@ -374,7 +475,7 @@ use-damage = false;
 # using *--log-file*, since it can generate a huge stream of logs.
 #
 # log-level = "debug"
-log-level = "warn";
+log-level = "info";
 
 # Set the log file.
 # If *--log-file* is never specified, logs will be written to stderr. 
@@ -382,13 +483,13 @@ log-level = "warn";
 # logs might still be written to the stderr. 
 # When setting this option from the config file, it is recommended to use an absolute path.
 #
-# log-file = "/path/to/your/log/file"
+# log-file = '/path/to/your/log/file'
 
 # Show all X errors (for debugging)
 # show-all-xerrors = false
 
 # Write process ID to a file.
-# write-pid-path = "/path/to/your/log/file"
+# write-pid-path = '/path/to/your/log/file'
 
 # Window type settings
 # 
@@ -414,10 +515,6 @@ log-level = "warn";
 #     normally won't be able to see. Useful when the window has parts of it 
 #     transparent, and you want shadows in those areas.
 # 
-#   clip-shadow-above:::
-#     Controls whether shadows that would have been drawn above the window should
-#     be clipped. Useful for dock windows that should have no shadow painted on top.
-#
 #   redir-ignore:::
 #     Controls whether this type of windows should cause screen to become 
 #     redirected again after been unredirected. If you have unredir-if-possible
@@ -426,9 +523,12 @@ log-level = "warn";
 #
 wintypes:
 {
-  tooltip = { fade = true; shadow = true; opacity = 1.0; focus = true; full-shadow = false; };
+  normal = { fade = false; shadow = false; }
-  dock = { shadow = false; clip-shadow-above = true; }
+  tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; full-shadow = false; };
+  dock = { shadow = false; }
   dnd = { shadow = false; }
+  # popup_menu = { opacity = 0.8; }
   popup_menu = { opacity = 1.0; }
+  # dropdown_menu = { opacity = 0.8; }
   dropdown_menu = { opacity = 1.0; }
 };

.config/picom/toggle_picom.sh

@@ -0,0 +1,66 @@
+#!/bin/bash
+
+helpmenu() {
+    echo "Script to toggle picom ON/OFF. Use only one argument at a time."
+    echo "Usage: toggle_picom.sh [--toggle | -t] [--on] [--off] [--help | -h]"
+    echo "  - Toggle:   toggle_picom.sh OR toggle_picom.sh --toggle OR toggle_picom.sh -t"
+    echo "  - Turn On:  toggle_picom.sh --on"
+    echo "  - Turn Off: toggle_picom.sh --off"
+    echo "  - Help:     toggle_picom.sh --help OR toggle_picom.sh -h"
+}
+
+check_running() {
+    if pgrep -x picom >/dev/null; then
+        echo 1
+    else
+        echo 0
+    fi
+}
+
+turn_on() {
+    notify-send "Turning Picom ON"
+
+    if [ $(check_running) -eq '0' ]; then
+        picom --config /home/sravan/.config/picom/picom.conf &
+    fi
+}
+
+turn_off() {
+    notify-send "Turning Picom OFF"
+
+    if [ $(check_running) -eq '1' ]; then
+        killall picom
+    fi
+}
+
+toggle() {
+    if [ $(check_running) -eq '1' ]; then
+        turn_off
+    else
+        turn_on
+    fi
+}
+
+main() {
+    if [ $# -eq 0 ]; then
+        # No arguments
+        toggle
+    else
+        case $1 in
+        --help | -h)
+            helpmenu
+            ;;
+        --toggle | -t)
+            toggle
+            ;;
+        --on)
+            turn_on
+            ;;
+        --off)
+            turn_off
+            ;;
+        esac
+    fi
+}
+
+main $@

.config/polybar

@@ -0,0 +1 @@
+Subproject commit 13a0ee5c2bcf2ef4790163a47c7b95b87a289dcb

.config/qt5ct/colors/Dracula.conf

@@ -0,0 +1,4 @@
+[ColorScheme]
+active_colors=#ffbd93f9, #ff282a36, #fff8f8f2, #fff8f8f2, #ff44475a, #ff44475a, #fff8f8f2, #fff8f8f2, #fff8f8f2, #ff282a36, #ff282a36, #ff44475a, #ff6272a4, #ffbd93f9, #ff8be9fd, #ff8be9fd, #ff44475a, #ff6272a4, #ff44475a, #fff8f8f2, #ff44475a
+disabled_colors=#ffbd93f9, #ff282a36, #ffffffff, #ffebedee, #ff44475a, #ff44475a, #fff8f8f2, #ffffffff, #fff8f8f2, #ff282a36, #ff282a36, #ff44475a, #ff6272a4, #ffbd93f9, #ff8be9fd, #ff8be9fd, #ff44475a, #ff6272a4, #ff44475a, #fff8f8f2, #ff44475a
+inactive_colors=#ffbd93f9, #ff282a36, #ffffffff, #fff6f7f7, #ff44475a, #ff44475a, #fff8f8f2, #fff8f8f2, #fff8f8f2, #ff282a36, #ff282a36, #ff44475a, #ff6272a4, #ffbd93f9, #ff8be9fd, #ff8be9fd, #ff44475a, #ff6272a4, #ff44475a, #fff8f8f2, #ff44475a

.config/redshift/redshift.conf

@@ -27,7 +27,7 @@ transition=1
 ; Set the location-provider: 'geoclue', 'geoclue2', 'manual'
 ; type 'redshift -l list' to see possible values.
 ; The location provider settings are in a different section.
-location-provider=geoclue2
+location-provider=manual
 
 ; Set the adjustment-method: 'randr', 'vidmode'
 ; type 'redshift -m list' to see all possible values.
@@ -41,9 +41,10 @@ adjustment-method=randr
 ; ex: 'redshift -l manual:help'
 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
 ; are negative numbers.
-; [manual]
+[manual]
-; lat=xxxx
+; Farmington Hills, MI
-; lon=xxx
+lat=42.4990
+lon=-83.3677
 
 ; Configuration of the adjustment-method
 ; type 'redshift -m METHOD:help' to see the settings.

.config/rofi/config.rasi

@@ -1,5 +1,5 @@
 configuration {
-    modi: "combi";
+    modi: "drun,run,clipboard:greenclip print,ssh";
 /*	width: 50;*/
 /*	lines: 15;*/
 /*	columns: 1;*/
@@ -11,7 +11,7 @@ configuration {
 /*	xoffset: 0;*/
 /*	fixed-num-lines: true;*/
 	show-icons: true;
-    terminal: "foot";
+	terminal: "kitty";
 /*	ssh-client: "ssh";*/
 /*	ssh-command: "{terminal} -e {ssh-client} {host} [-p {port}]";*/
 /*	run-command: "{cmd}";*/
@@ -29,12 +29,12 @@ configuration {
 /*	sorting-method: ;*/
 /*	case-sensitive: false;*/
 /*	cycle: true;*/
-    sidebar-mode: false;
+/*	sidebar-mode: false;*/
 /*	eh: 1;*/
 /*	auto-select: false;*/
 /*	parse-hosts: false;*/
 /*	parse-known-hosts: true;*/
-    combi-modi: "window,drun";
+/*	combi-modi: "window,run";*/
 /*	matching: "normal";*/
 /*	tokenize: true;*/
 /*	m: "-5";*/
@@ -53,6 +53,7 @@ configuration {
 /*	window-format: "{w}    {c}   {t}";*/
 /*	click-to-exit: true;*/
 /*	show-match: true;*/
+/*	theme: ;*/
 /*	color-normal: ;*/
 /*	color-urgent: ;*/
 /*	color-active: ;*/
@@ -62,12 +63,12 @@ configuration {
 /*	matching-negate-char: '-' /* unsupported */;*/
 /*	cache-dir: ;*/
 /*	pid: "/run/user/1000/rofi.pid";*/
-    display-window: "window";
+/*	display-window: ;*/
 /*	display-windowcd: ;*/
-    display-run: "execute";
+/*	display-run: ;*/
 /*	display-ssh: ;*/
-    display-drun: "launch";
+/*	display-drun: ;*/
-    display-combi: "combi";
+/*	display-combi: ;*/
 /*	display-keys: ;*/
 /*	kb-primary-paste: "Control+V,Shift+Insert";*/
 /*	kb-secondary-paste: "Control+v,Insert";*/
@@ -81,19 +82,19 @@ configuration {
 /*	kb-remove-word-back: "Control+Alt+h,Control+BackSpace";*/
 /*	kb-remove-word-forward: "Control+Alt+d";*/
 /*	kb-remove-char-forward: "Delete,Control+d";*/
-    kb-remove-char-back: "BackSpace";
+/*	kb-remove-char-back: "BackSpace,Shift+BackSpace,Control+h";*/
-    kb-remove-to-eol: "Control+Shift+e";
+/*	kb-remove-to-eol: "Control+k";*/
 /*	kb-remove-to-sol: "Control+u";*/
-    kb-accept-entry: "Control+m,Return,KP_Enter";
+/*	kb-accept-entry: "Control+j,Control+m,Return,KP_Enter";*/
 /*	kb-accept-custom: "Control+Return";*/
 /*	kb-accept-alt: "Shift+Return";*/
 /*	kb-delete-entry: "Shift+Delete";*/
-    kb-mode-next: "Shift+Right,Control+Tab";
+/*	kb-mode-next: "Shift+Right,Control+Tab";*/
-    kb-mode-previous: "Shift+Left";
+/*	kb-mode-previous: "Shift+Left,Control+ISO_Left_Tab";*/
 /*	kb-row-left: "Control+Page_Up";*/
 /*	kb-row-right: "Control+Page_Down";*/
-    kb-row-up: "Up,Control+k,Control+p";
+/*	kb-row-up: "Up,Control+p,ISO_Left_Tab";*/
-    kb-row-down: "Down,Control+j,Control+n";
+/*	kb-row-down: "Down,Control+n";*/
 /*	kb-row-tab: "Tab";*/
 /*	kb-page-prev: "Page_Up";*/
 /*	kb-page-next: "Page_Down";*/
@@ -142,5 +143,4 @@ configuration {
 /*	me-accept-entry: "MouseDPrimary";*/
 /*	me-accept-custom: "Control+MouseDPrimary";*/
 }
-
+@import "./themes/dracula-blurry-full.rasi"
-@theme "centertab-dracula"

.config/rofi/themes/dmenu-dracula.rasi

@@ -0,0 +1,42 @@
+/**
+ * ROFI Color theme: dmenu-dracula
+ * User: balajsra
+ * Copyright: Sravan Balaji
+ */
+* {
+	background-color: #282a36;
+	text-color: #f8f8f2;
+	font: "NotoSans Nerd Font 12";
+}
+
+#window {
+	anchor: north;
+	location: north;
+	width: 100%;
+	padding: 2px 5px 2px 5px; /* top right bottom left */
+	children: [ horibox ];
+}
+
+#horibox {
+	orientation: horizontal;
+	children: [ prompt, entry, listview ];
+}
+
+#listview {
+	layout: horizontal;
+	spacing: 10px;
+	lines: 100;
+}
+
+#entry {
+	expand: false;
+	width: 10em;
+}
+
+#element {
+	padding: 1px 5px 1px 5px; /* top right bottom left */
+}
+#element selected {
+	background-color: #bd93f9;
+	text-color: #282a36;
+}

.config/rofi/themes/dracula-blurry-full.rasi

@@ -0,0 +1,138 @@
+/*
+ *
+ * Author : Aditya Shakya (adi1090x)
+ * Mail : adi1090x@gmail.com
+ * Github : @adi1090x
+ * Reddit : @adi1090x
+ *
+ * Dracula Theme Colors : Sravan Balaji (balajsra)
+ * Mail: balajsra@umich.edu
+ * Github: @balajsra
+ */
+
+configuration {
+	drun-display-format: "{name}";
+	threads: 0;
+	scroll-method: 0;
+	disable-history: false;
+	fullscreen: false;
+	hide-scrollbar: true;
+	sidebar-mode: false;
+}
+
+* {
+	background: #00000000;
+	background-color: #282a36cc;
+	background-entry: #44475acc;
+	background-alt: #44475acc;
+	foreground: #f8f8f2cc;
+	foreground-selected: #50fa7bcc;
+	urgent: #ff5555cc;
+	urgent-selected: #ff5555cc;
+}
+
+window {
+	transparency: "real";
+	background-color: @background;
+	text-color: @foreground;
+	height: 100%;
+	width: 100%;
+	location: northwest;
+	anchor: northwest;
+	x-offset: 0;
+	y-offset: 0;
+}
+
+prompt {
+	enabled: false;
+}
+
+inputbar {
+	background-color: @background-alt;
+	text-color: @foreground;
+	expand: false;
+	border-radius: 6px;
+	margin: 0px 430px 0px 430px;
+	padding: 10px 10px 10px 10px;
+	position: north;
+}
+
+entry {
+	background-color: @background;
+	text-color: @foreground;
+	placeholder-color: @foreground;
+	expand: true;
+	horizontal-align: 0.5;
+	placeholder: "Search applications";
+	blink: true;
+}
+
+case-indicator {
+	background-color: @background;
+	text-color: @foreground;
+	spacing: 0;
+}
+
+listview {
+	background-color: @background;
+	columns: 7;
+	spacing: 4px;
+	cycle: false;
+	dynamic: true;
+	layout: vertical;
+}
+
+mainbox {
+	background-color: @background-color;
+	children: [ inputbar, listview ];
+	spacing: 25px;
+	padding: 70px 135px 55px 135px;
+}
+
+element {
+	background-color: @background;
+	text-color: @foreground;
+	orientation: vertical;
+	border-radius: 9px;
+	padding: 20px 0px 20px 0px;
+}
+
+element-icon {
+	size: 65px;
+	border: 0px;
+}
+
+element-text {
+	expand: true;
+	horizontal-align: 0.5;
+	vertical-align: 0.5;
+	margin: 5px 10px 0px 10px;
+}
+
+element normal.urgent,
+element alternate.urgent {
+	background-color: @urgent;
+	text-color: @foreground;
+	border-radius: 9px;
+}
+
+element normal.active,
+element alternate.active {
+	background-color: @background-alt;
+	text-color: @foreground;
+}
+
+element selected {
+	background-color: @background-alt;
+	text-color: @foreground-selected;
+}
+
+element selected.urgent {
+	background-color: @urgent-selected;
+	text-color: @foreground;
+}
+
+element selected.active {
+	background-color: @background-alt;
+	color: @foreground-selected;
+}

.config/rofi/themes/dracula.rasi

@@ -1,7 +1,7 @@
 /*Dracula theme based on the Purple official rofi theme*/
 
 * {
-    font: "JetBrainsMono Nerd Font 12";
+    font: "Jetbrains Mono 12";
     foreground: #f8f8f2;
     background-color: #282a36;
     active-background: #6272a4;
@@ -80,13 +80,6 @@
     background-color: @active-background;
     text-color:       @foreground;
 }
-#element-text {
-    background-color: inherit;
-    text-color:       inherit;
-}
-#element-icon {
-    background-color: inherit;
-}
 #scrollbar {
     width:        2px ;
     border:       0;

.config/rofi/themes/sidetab-dracula.rasi

@@ -0,0 +1,137 @@
+/**
+ * ROFI Color theme: dmenu-dracula
+ * User: balajsra
+ * Copyright: deadguy & Sravan Balaji
+ */
+
+configuration {
+	display-drun: "Activate";
+	display-run: "Execute";
+	display-window: "Window";
+	show-icons: true;
+	sidebar-mode: true;
+	font: "NotoSans Nerd Font 12";
+}
+
+* {
+	background-color: #282a36;
+	text-color: #f8f8f2;
+	selbg: #bd93f9;
+	actbg: #44475a;
+	urgbg: #ff5555;
+	winbg: #50fa7b;
+
+	selected-normal-foreground: @winbg;
+	normal-foreground: @text-color;
+	selected-normal-background: @actbg;
+	normal-background: @background-color;
+
+	selected-urgent-foreground: @background-color;
+	urgent-foreground: @text-color;
+	selected-urgent-background: @urgbg;
+	urgent-background: @background-color;
+
+	selected-active-foreground: @winbg;
+	active-foreground: @text-color;
+	selected-active-background: @actbg;
+	active-background: @selbg;
+
+	line-margin: 2;
+	line-padding: 2;
+	separator-style: "none";
+	hide-scrollbar: "true";
+	margin: 0;
+	padding: 0;
+}
+
+window {
+	location: west;
+	anchor: west;
+	height: 100%;
+	width: 25%;
+	orientation: horizontal;
+	children: [mainbox];
+}
+
+mainbox {
+	spacing: 0.8em;
+	children: [ entry, listview, mode-switcher ];
+}
+
+button {
+	padding: 5px 2px;
+}
+
+button selected {
+	background-color: @active-background;
+	text-color: @background-color;
+}
+
+inputbar {
+	padding: 5px;
+	spacing: 5px;
+}
+
+listview {
+	spacing: 0.5em;
+	dynamic: false;
+	cycle: true;
+}
+
+element {
+	padding: 10px;
+}
+
+entry {
+	expand: false;
+	text-color: @normal-foreground;
+	vertical-align: 1;
+	padding: 5px;
+}
+
+element normal.normal {
+	background-color: @normal-background;
+	text-color: @normal-foreground;
+}
+
+element normal.urgent {
+	background-color: @urgent-background;
+	text-color: @urgent-foreground;
+}
+
+element normal.active {
+	background-color: @active-background;
+	text-color: @active-foreground;
+}
+
+element selected.normal {
+	background-color: @selected-normal-background;
+	text-color: @selected-normal-foreground;
+	border: 0 5px solid 0 0;
+	border-color: @active-background;
+}
+
+element selected.urgent {
+	background-color: @selected-urgent-background;
+	text-color: @selected-urgent-foreground;
+}
+
+element selected.active {
+	background-color: @selected-active-background;
+	text-color: @selected-active-foreground;
+}
+
+element alternate.normal {
+	background-color: @normal-background;
+	text-color: @normal-foreground;
+}
+
+element alternate.urgent {
+	background-color: @urgent-background;
+	text-color: @urgent-foreground;
+}
+
+element alternate.active {
+	background-color: @active-background;
+	text-color: @active-foreground;
+}

.config/rofi/themes/slate-dracula.rasi

@@ -0,0 +1,50 @@
+/**
+ * ROFI Color theme: dmenu-dracula
+ * User: balajsra
+ * Copyright: Sravan Balaji
+ */
+* {
+	background-color: #282a36;
+	border-color: #bd93f9;
+	text-color: #f8f8f2;
+	spacing: 0;
+	width: 1024px;
+	font: "NotoSans Nerd Font 12";
+}
+
+inputbar {
+	border: 0 0 1px 0; /* top right bottom left */
+	children: [prompt, entry];
+}
+
+prompt {
+	padding: 16px;
+	border: 2px 1px 0 2px; /* top right bottom left */
+}
+
+textbox {
+	background-color: #282a36;
+	border: 0 0 1px 0; /* top right bottom left */
+	border-color: #bd93f9;
+	padding: 8px 16px 8px 16px; /* top right bottom left */
+}
+
+entry {
+	border: 2px 2px 0px 0; /* top right bottom left */
+	padding: 16px;
+}
+
+listview {
+	cycle: true;
+	margin: 0 0 0px 0; /* top right bottom left */
+	scrollbar: true;
+}
+
+element {
+	border: 0 2px 1px 2px; /* top right bottom left */
+	padding: 16px;
+}
+
+element selected {
+	background-color: #44475a;
+}

.config/starship.toml

@@ -0,0 +1,98 @@
+# ~/.config/starship.toml
+
+# Don't print a new line at the start of the prompt
+add_newline = false
+
+format = "[◆](bold green) $all"
+
+[aws]
+symbol = " "
+
+[battery]
+full_symbol = ""
+charging_symbol = ""
+discharging_symbol = ""
+
+[character]
+format = "$symbol"
+success_symbol = "[❯](bold purple)[❯](bold cyan)[❯](bold green) "
+error_symbol = "[❯❯❯](bold red) "
+
+[cmd_duration]
+min_time = 10_000
+
+[conda]
+symbol = " "
+
+[dart]
+symbol = " "
+
+[directory]
+format = "[$path]($style)[$read_only]($read_only_style) "
+truncation_length = 4
+truncate_to_repo = false
+truncation_symbol = "…/"
+read_only = ""
+
+[docker]
+symbol = " "
+
+[elixir]
+symbol = " "
+
+[elm]
+symbol = " "
+
+[git_branch]
+symbol = " "
+
+[golang]
+symbol = " "
+
+[haskell]
+symbol = " "
+
+[hg_branch]
+symbol = " "
+
+[java]
+symbol = " "
+
+[julia]
+symbol = " "
+
+[line_break]
+disabled = false
+
+[memory_usage]
+symbol = " "
+
+[nim]
+symbol = " "
+
+[nix_shell]
+symbol = " "
+
+[nodejs]
+symbol = " "
+
+[package]
+symbol = " "
+
+[perl]
+symbol = " "
+
+[php]
+symbol = " "
+
+[python]
+symbol = " "
+
+[ruby]
+symbol = " "
+
+[rust]
+symbol = " "
+
+[swift]
+symbol = "ﯣ "

.gitconfig

@@ -0,0 +1,7 @@
+[user]
+	email = balajsra@umich.edu
+	name = Sravan Balaji
+[pull]
+	rebase = false
+[alias]
+    tree = log --all --decorate --oneline --graph

.gitignore

@@ -1,14 +1 @@
-fish/.config/fish/fish_variables
+.cfg
-qt5/.config/qt5ct/qt5ct.conf
-
-xournalpp/.config/xournalpp/
-!xournalpp/.config/xournalpp/toolbar.ini
-
-autorandr/.config/autorandr/
-!autorandr/.config/autorandr/postswitch
-
-vim/.vim/.netrwhist
-
-vscode/.config/Code
-!vscode/.config/Code/User/settings.json
-!vscode/.config/Code/User/keybindings.json

.gitmodules

@@ -1,99 +1,15 @@
-[submodule "dracula-vim-theme"]
+[submodule ".vim/pack/themes/start/dracula"]
-	path = vim/.vim/pack/themes/start/dracula
+	path = .vim/pack/themes/start/dracula
-	url = git@github.com:dracula/vim.git
+	url = https://github.com/dracula/vim.git
-	branch = master
+[submodule ".themes/Dracula"]
-[submodule "dracula-blender-theme"]
+	path = .themes/Dracula
-	path = blender/.themes/dracula-blender
-	url = git@github.com:dracula/blender.git
-	branch = master
-[submodule "dracula-freecad-theme"]
-	path = freecad/.themes/dracula-freecad
-	url = git@github.com:dracula/freecad.git
-	branch = master
-[submodule "dracula-xournalpp-theme"]
-	path = xournalpp/.themes/dracula-xournalpp
-	url = git@github.com:dracula/xournalpp.git
-	branch = master
-[submodule "dracula-gtk-theme"]
-	path = gtk/.themes/dracula-gtk
 	url = git@github.com:dracula/gtk.git
-	branch = master
+[submodule ".config/dwm"]
-[submodule "dracula-fish-theme"]
+	path = .config/dwm
-	path = fish/.themes/dracula-fish
+	url = https://github.com/balajsra/dwm.git
-	url = git@github.com:dracula/fish.git
+[submodule ".config/polybar"]
-	branch = master
+	path = .config/polybar
-[submodule "dracula-kitty-theme"]
+	url = git@github.com:balajsra/polybar.git
-	path = kitty/.themes/dracula-kitty
+[submodule "/home/sravan/.local/share/Steam/skins/Dracula"]
-	url = git@github.com:dracula/kitty.git
+	path = /home/sravan/.local/share/Steam/skins/Dracula
-	branch = master
+	url = https://github.com/dracula/steam.git
-[submodule "dracula-tty-theme"]
-	path = tty/.themes/dracula-tty
-	url = git@github.com:dracula/tty.git
-	branch = master
-[submodule "xmonad"]
-	path = xmonad/.xmonad
-	url = ../xmonad.git
-	branch = master
-[submodule "dwm-flexipatch"]
-	path = dwm/.config/dwm-flexipatch
-	url = ../dwm-flexipatch.git
-	branch = master
-[submodule "chemacs"]
-	path = emacs/.config/emacs
-	url = git@github.com:plexus/chemacs2.git
-	branch = main
-[submodule "personal-emacs"]
-	path = emacs/.config/personal-emacs
-	url = ../emacs.git
-	branch = main
-[submodule "doom-emacs"]
-	path = emacs/.config/doom-emacs
-	url = git@github.com:hlissner/doom-emacs.git
-	branch = master
-[submodule "doom-emacs-config"]
-	path = emacs/.config/doom-emacs-config
-	url = ../doom-emacs-config.git
-	branch = master
-[submodule "dracula-zathura-theme"]
-	path = zathura/.config/zathura
-	url = git@github.com:dracula/zathura.git
-	branch = master
-[submodule "dracula-gimp-theme"]
-	path = gimp/.themes/dracula-gimp
-	url = git@github.com:dracula/gimp.git
-	branch = master
-[submodule "awesome"]
-	path = awesome/.config/awesome
-	url = ../awesome.git
-	branch = main
-[submodule "hyprland"]
-	path = hyprland/.config/hypr
-	url = ../hyprland.git
-	branch = main
-[submodule "dracula-qt5-theme"]
-	path = qt5/.themes/dracula-qt5
-	url = git@github.com:dracula/qt5.git
-	branch = master
-[submodule "eww"]
-	path = eww/.config/eww
-	url = ../eww.git
-[submodule "tpm"]
-	path = tmux/.tmux/plugins/tpm
-	url = git@github.com:tmux-plugins/tpm.git
-	branch = master
-[submodule "tmux-sensible"]
-	path = tmux/.tmux/plugins/tmux-sensible
-	url = git@github.com:tmux-plugins/tmux-sensible.git
-	branch = master
-[submodule "dracula-tmux-theme"]
-	path = tmux/.tmux/plugins/tmux
-	url = git@github.com:dracula/tmux.git
-	branch = master
-[submodule "dwl"]
-	path = dwl/.config/dwl
-	url = ../dwl.git
-	branch = main
-[submodule "dracula-calibre-theme"]
-	path = calibre/.themes/dracula-calibre
-	url = git@github.com:dracula/calibre.git
-	branch = main

.local/share/Steam/skins/Dracula

@@ -0,0 +1 @@
+Subproject commit daa49c5b948aa8d491ed6a5db32d06a30b6d5f9d

.ssh/config

@@ -0,0 +1,11 @@
+# CAEN On-Campus
+Host caen-oncampus
+  HostName oncampus-course.engin.umich.edu
+  User balajsra
+  Compression yes
+
+# CAEN Off-Campus
+Host caen-offcampus
+  HostName login-course.engin.umich.edu
+  User balajsra
+  Compression yes

.stow-local-ignore

@@ -1,6 +0,0 @@
-\.git
-\.gitmodules
-\.gitignore
-LICENSE
-^/.*\.org
-justfile

.themes/Dracula

@@ -0,0 +1 @@
+Subproject commit ab2efe3ff5a1ce06a9f49c5d71be4a819b04a105

.vim/pack/themes/start/dracula

@@ -0,0 +1 @@
+Subproject commit 494dbe9d4effff140ffe6743b614d900a0f34dd7

.vim/pack/themes/start/dracula_pro/INSTALL.md

@@ -0,0 +1,39 @@
+### [Vim](http://www.vim.org/)
+
+#### Install
+
+These are the default instructions using Vim 8's `|packages|` feature.
+
+1. Create theme folder (in case you don't have yet):
+
+```
+mkdir -p ~/.vim/pack/themes/start
+```
+
+2. Copy the `vim` folder and rename to "dracula_pro":
+
+```
+cp -r vim ~/.vim/pack/themes/start/dracula_pro
+```
+
+#### Activate
+
+1. Create configuration file (in case you don't have yet):
+
+```
+vim ~/.vimrc
+```
+
+2. Edit the `~/.vimrc` file with the following content:
+
+```
+packadd! dracula_pro
+
+syntax enable
+
+let g:dracula_colorterm = 0
+
+colorscheme dracula_pro
+```
+
+P.S.: You need a 256-color or truecolor terminal and you may want one that supports xterm sequences for :terminal.

.vim/pack/themes/start/dracula_pro/after/plugin/dracula_pro.vim

@@ -0,0 +1,45 @@
+if dracula_pro#should_abort()
+  finish
+endif
+
+" Fzf: {{{
+if exists('g:loaded_fzf') && ! exists('g:fzf_colors')
+  let g:fzf_colors = {
+    \ 'fg':      ['fg', 'Normal'],
+    \ 'bg':      ['bg', 'Normal'],
+    \ 'hl':      ['fg', 'Search'],
+    \ 'fg+':     ['fg', 'Normal'],
+    \ 'bg+':     ['bg', 'Normal'],
+    \ 'hl+':     ['fg', 'DraculaOrange'],
+    \ 'info':    ['fg', 'DraculaPurple'],
+    \ 'border':  ['fg', 'Ignore'],
+    \ 'prompt':  ['fg', 'DraculaGreen'],
+    \ 'pointer': ['fg', 'Exception'],
+    \ 'marker':  ['fg', 'Keyword'],
+    \ 'spinner': ['fg', 'Label'],
+    \ 'header':  ['fg', 'Comment'],
+    \}
+endif
+"}}}
+" ALE: {{{
+if exists('g:ale_enabled')
+  hi! link ALEError              DraculaErrorLine
+  hi! link ALEWarning            DraculaWarnLine
+  hi! link ALEInfo               DraculaInfoLine
+
+  hi! link ALEErrorSign          DraculaRed
+  hi! link ALEWarningSign        DraculaOrange
+  hi! link ALEInfoSign           DraculaCyan
+
+  hi! link ALEVirtualTextError   Comment
+  hi! link ALEVirtualTextWarning Comment
+endif
+" }}}
+" CtrlP: {{{
+if exists('g:loaded_ctrlp')
+  hi! link CtrlPMatch     IncSearch
+  hi! link CtrlPBufferHid Normal
+endif
+" }}}
+
+" vim: fdm=marker ts=2 sts=2 sw=2 fdl=0:

.vim/pack/themes/start/dracula_pro/after/syntax/css.vim

@@ -0,0 +1,15 @@
+if dracula_pro#should_abort('css')
+    finish
+endif
+
+hi! link cssAttrComma         Delimiter
+hi! link cssAttrRegion        DraculaPink
+hi! link cssAttributeSelector DraculaGreenItalic
+hi! link cssBraces            Delimiter
+hi! link cssFunctionComma     Delimiter
+hi! link cssNoise             DraculaPink
+hi! link cssProp              DraculaCyan
+hi! link cssPseudoClass       DraculaPink
+hi! link cssPseudoClassId     DraculaGreenItalic
+hi! link cssUnitDecorators    DraculaPink
+hi! link cssVendor            DraculaGreenItalic

.vim/pack/themes/start/dracula_pro/after/syntax/gitcommit.vim

@@ -0,0 +1,12 @@
+if dracula_pro#should_abort('gitcommit')
+    finish
+endif
+
+" The following two are misnomers. Colors are correct.
+hi! link diffFile    DraculaGreen
+hi! link diffNewFile DraculaRed
+
+hi! link diffAdded   DraculaGreen
+hi! link diffLine    DraculaCyanItalic
+hi! link diffRemoved DraculaRed
+

.vim/pack/themes/start/dracula_pro/after/syntax/html.vim

@@ -0,0 +1,9 @@
+if dracula_pro#should_abort('html')
+    finish
+endif
+
+hi! link htmlTag         DraculaFg
+hi! link htmlArg         DraculaGreenItalic
+hi! link htmlTitle       DraculaFg
+hi! link htmlH1          DraculaFg
+hi! link htmlSpecialChar DraculaPurple

.vim/pack/themes/start/dracula_pro/after/syntax/javascript.vim

@@ -0,0 +1,25 @@
+if dracula_pro#should_abort('javascript')
+    finish
+endif
+
+hi! link javaScriptBraces   Delimiter
+hi! link javaScriptNumber   Constant
+hi! link javaScriptNull     Constant
+hi! link javaScriptFunction Keyword
+
+" pangloss/vim-javascript {{{
+
+hi! link jsArrowFunction           Operator
+hi! link jsClassMethodType         Keyword
+hi! link jsDestructuringAssignment DraculaOrangeItalic
+hi! link jsDocParam                DraculaOrangeItalic
+hi! link jsDocTags                 Keyword
+hi! link jsDocType                 Type
+hi! link jsDocTypeBrackets         DraculaCyan
+hi! link jsFuncArgOperator         Operator
+hi! link jsFunction                Keyword
+hi! link jsTemplateBraces          Special
+
+"}}}
+
+" vim: fdm=marker ts=2 sts=2 sw=2 fdl=0:

.vim/pack/themes/start/dracula_pro/after/syntax/json.vim

@@ -0,0 +1,6 @@
+if dracula_pro#should_abort('json')
+    finish
+endif
+
+hi! link jsonKeyword      DraculaCyan
+hi! link jsonKeywordMatch DraculaPink

.vim/pack/themes/start/dracula_pro/after/syntax/markdown.vim

@@ -0,0 +1,50 @@
+if dracula_pro#should_abort('markdown', 'mkd')
+    finish
+endif
+
+if b:current_syntax ==# 'mkd'
+" plasticboy/vim-markdown {{{1
+  hi! link htmlBold       DraculaOrangeBold
+  hi! link htmlBoldItalic DraculaOrangeBoldItalic
+  hi! link htmlH1         DraculaPurpleBold
+  hi! link htmlItalic     DraculaYellowItalic
+  hi! link mkdBlockquote  DraculaYellowItalic
+  hi! link mkdBold        DraculaOrangeBold
+  hi! link mkdBoldItalic  DraculaOrangeBoldItalic
+  hi! link mkdCode        DraculaGreen
+  hi! link mkdCodeEnd     DraculaGreen
+  hi! link mkdCodeStart   DraculaGreen
+  hi! link mkdHeading     DraculaPurpleBold
+  hi! link mkdInlineUrl   DraculaLink
+  hi! link mkdItalic      DraculaYellowItalic
+  hi! link mkdLink        DraculaPink
+  hi! link mkdListItem    DraculaCyan
+  hi! link mkdRule        DraculaComment
+  hi! link mkdUrl         DraculaLink
+"}}}1
+elseif b:current_syntax ==# 'markdown'
+" Builtin: {{{1
+  hi! link markdownBlockquote        DraculaCyan
+  hi! link markdownBold              DraculaOrangeBold
+  hi! link markdownBoldItalic        DraculaOrangeBoldItalic
+  hi! link markdownCodeBlock         DraculaGreen
+  hi! link markdownCode              DraculaGreen
+  hi! link markdownCodeDelimiter     DraculaGreen
+  hi! link markdownH1                DraculaPurpleBold
+  hi! link markdownH2                markdownH1
+  hi! link markdownH3                markdownH1
+  hi! link markdownH4                markdownH1
+  hi! link markdownH5                markdownH1
+  hi! link markdownH6                markdownH1
+  hi! link markdownHeadingDelimiter  markdownH1
+  hi! link markdownHeadingRule       markdownH1
+  hi! link markdownItalic            DraculaYellowItalic
+  hi! link markdownLinkText          DraculaPink
+  hi! link markdownListMarker        DraculaCyan
+  hi! link markdownOrderedListMarker DraculaCyan
+  hi! link markdownRule              DraculaComment
+  hi! link markdownUrl               DraculaLink
+"}}}
+endif
+
+" vim: fdm=marker ts=2 sts=2 sw=2 fdl=0:

.vim/pack/themes/start/dracula_pro/after/syntax/ocaml.vim

@@ -0,0 +1,7 @@
+if dracula_pro#should_abort('ocaml')
+    finish
+endif
+
+hi! link ocamlModule  Type
+hi! link ocamlModPath Normal
+hi! link ocamlLabel   DraculaOrangeItalic

.vim/pack/themes/start/dracula_pro/after/syntax/perl.vim

@@ -0,0 +1,38 @@
+if dracula_pro#should_abort('perl')
+    finish
+endif
+
+" Regex
+hi! link perlMatchStartEnd       DraculaRed
+
+" Builtin functions
+hi! link perlOperator            DraculaCyan
+hi! link perlStatementFiledesc   DraculaCyan
+hi! link perlStatementFiles      DraculaCyan
+hi! link perlStatementFlow       DraculaCyan
+hi! link perlStatementHash       DraculaCyan
+hi! link perlStatementIOfunc     DraculaCyan
+hi! link perlStatementIPC        DraculaCyan
+hi! link perlStatementList       DraculaCyan
+hi! link perlStatementMisc       DraculaCyan
+hi! link perlStatementNetwork    DraculaCyan
+hi! link perlStatementNumeric    DraculaCyan
+hi! link perlStatementProc       DraculaCyan
+hi! link perlStatementPword      DraculaCyan
+hi! link perlStatementRegexp     DraculaCyan
+hi! link perlStatementScalar     DraculaCyan
+hi! link perlStatementSocket     DraculaCyan
+hi! link perlStatementTime       DraculaCyan
+hi! link perlStatementVector     DraculaCyan
+
+" Highlighting for quoting constructs, tied to existing option in vim-perl
+if get(g:, 'perl_string_as_statement', 0)
+  hi! link perlStringStartEnd DraculaRed
+endif
+
+" Signatures
+hi! link perlSignature           DraculaOrangeItalic
+hi! link perlSubPrototype        DraculaOrangeItalic
+
+" Hash keys
+hi! link perlVarSimpleMemberName DraculaPurple

.vim/pack/themes/start/dracula_pro/after/syntax/php.vim

@@ -0,0 +1,10 @@
+if dracula_pro#should_abort('php')
+    finish
+endif
+
+hi! link phpClass           Type
+hi! link phpClasses         Type
+hi! link phpDocTags         DraculaCyanItalic
+hi! link phpFunction        Function
+hi! link phpParent          Normal
+hi! link phpSpecialFunction DraculaCyan

.vim/pack/themes/start/dracula_pro/after/syntax/plantuml.vim

@@ -0,0 +1,13 @@
+if dracula_pro#should_abort('plantuml')
+    finish
+endif
+
+hi! link plantumlClassPrivate              SpecialKey
+hi! link plantumlClassProtected            DraculaOrange
+hi! link plantumlClassPublic               Function
+hi! link plantumlColonLine                 String
+hi! link plantumlDirectedOrVerticalArrowLR Constant
+hi! link plantumlDirectedOrVerticalArrowRL Constant
+hi! link plantumlHorizontalArrow           Constant
+hi! link plantumlSkinParamKeyword          DraculaCyan
+hi! link plantumlTypeKeyword               Keyword

.vim/pack/themes/start/dracula_pro/after/syntax/python.vim

@@ -0,0 +1,11 @@
+if dracula_pro#should_abort('python')
+    finish
+endif
+
+hi! link pythonBuiltinObj    Type
+hi! link pythonBuiltinObject Type
+hi! link pythonBuiltinType   Type
+hi! link pythonClassVar      DraculaPurpleItalic
+hi! link pythonExClass       Type
+hi! link pythonNone          Type
+hi! link pythonRun           Comment

.vim/pack/themes/start/dracula_pro/after/syntax/ruby.vim

@@ -0,0 +1,16 @@
+if dracula_pro#should_abort('ruby')
+    finish
+endif
+
+if ! exists('g:ruby_operators')
+    let g:ruby_operators=1
+endif
+
+hi! link rubyBlockArgument          DraculaOrangeItalic
+hi! link rubyBlockParameter         DraculaOrangeItalic
+hi! link rubyCurlyBlock             DraculaPink
+hi! link rubyGlobalVariable         DraculaPurple
+hi! link rubyInstanceVariable       DraculaPurpleItalic
+hi! link rubyInterpolationDelimiter DraculaPink
+hi! link rubyRegexpDelimiter        DraculaRed
+hi! link rubyStringDelimiter        DraculaYellow

.vim/pack/themes/start/dracula_pro/after/syntax/rust.vim

@@ -0,0 +1,5 @@
+if dracula_pro#should_abort('rust')
+    finish
+endif
+
+hi! link rustCommentLineDoc Comment

.vim/pack/themes/start/dracula_pro/after/syntax/sass.vim

@@ -0,0 +1,12 @@
+if dracula_pro#should_abort('sass')
+    finish
+endif
+
+hi! link sassClass                  cssClassName
+hi! link sassClassChar              cssClassNameDot
+hi! link sassId                     cssIdentifier
+hi! link sassIdChar                 cssIdentifier
+hi! link sassInterpolationDelimiter DraculaPink
+hi! link sassMixinName              Function
+hi! link sassProperty               cssProp
+hi! link sassVariableAssignment     Operator

.vim/pack/themes/start/dracula_pro/after/syntax/sh.vim

@@ -0,0 +1,8 @@
+if dracula_pro#should_abort('bash', 'ksh', 'posix', 'sh')
+    finish
+endif
+
+hi! link shCommandSub NONE
+hi! link shEscape     DraculaRed
+hi! link shParen      NONE
+hi! link shParenError NONE

.vim/pack/themes/start/dracula_pro/after/syntax/tex.vim

@@ -0,0 +1,17 @@
+if dracula_pro#should_abort('tex')
+    finish
+endif
+
+hi! link texBeginEndName  DraculaOrangeItalic
+hi! link texBoldItalStyle DraculaOrangeBoldItalic
+hi! link texBoldStyle     DraculaOrangeBold
+hi! link texInputFile     DraculaOrangeItalic
+hi! link texItalStyle     DraculaYellowItalic
+hi! link texLigature      DraculaPurple
+hi! link texMath          DraculaPurple
+hi! link texMathMatcher   DraculaPurple
+hi! link texMathSymbol    DraculaPurple
+hi! link texRefZone       DraculaBgDarker
+hi! link texSpecialChar   DraculaPurple
+hi! link texSubscripts    DraculaPurple
+hi! link texTitle         DraculaFgBold

.vim/pack/themes/start/dracula_pro/after/syntax/typescript.vim

@@ -0,0 +1,57 @@
+if dracula_pro#should_abort('typescript', 'typescriptreact')
+    finish
+endif
+
+" HerringtonDarkholme/yats.vim {{{
+
+hi! link typescriptAliasDeclaration       Type
+hi! link typescriptArrayMethod            Function
+hi! link typescriptArrowFunc              Operator
+hi! link typescriptArrowFuncArg           DraculaOrangeItalic
+hi! link typescriptAssign                 Operator
+hi! link typescriptBOMWindowProp          Constant
+hi! link typescriptBinaryOp               Operator
+hi! link typescriptBraces                 Delimiter
+hi! link typescriptCall                   typescriptArrowFuncArg
+hi! link typescriptClassHeritage          Type
+hi! link typescriptClassName              Type
+hi! link typescriptDateMethod             DraculaCyan
+hi! link typescriptDateStaticMethod       Function
+hi! link typescriptDecorator              DraculaGreenItalic
+hi! link typescriptDefaultParam           Operator
+hi! link typescriptES6SetMethod           DraculaCyan
+hi! link typescriptEndColons              Delimiter
+hi! link typescriptEnum                   Type
+hi! link typescriptEnumKeyword            Keyword
+hi! link typescriptFuncComma              Delimiter
+hi! link typescriptFuncKeyword            Keyword
+hi! link typescriptFuncType               DraculaOrangeItalic
+hi! link typescriptFuncTypeArrow          Operator
+hi! link typescriptGlobal                 Type
+hi! link typescriptGlobalMethod           DraculaCyan
+hi! link typescriptGlobalObjects          Type
+hi! link typescriptIdentifier             DraculaPurpleItalic
+hi! link typescriptInterfaceHeritage      Type
+hi! link typescriptInterfaceName          Type
+hi! link typescriptInterpolationDelimiter Keyword
+hi! link typescriptKeywordOp              Keyword
+hi! link typescriptLogicSymbols           Operator
+hi! link typescriptMember                 Identifier
+hi! link typescriptMemberOptionality      Special
+hi! link typescriptObjectColon            Special
+hi! link typescriptObjectLabel            Identifier
+hi! link typescriptObjectSpread           Operator
+hi! link typescriptOperator               Operator
+hi! link typescriptParamImpl              DraculaOrangeItalic
+hi! link typescriptParens                 Delimiter
+hi! link typescriptPredefinedType         Type
+hi! link typescriptRestOrSpread           Operator
+hi! link typescriptTernaryOp              Operator
+hi! link typescriptTypeAnnotation         Special
+hi! link typescriptTypeCast               Operator
+hi! link typescriptTypeParameter          DraculaOrangeItalic
+hi! link typescriptTypeReference          Type
+hi! link typescriptUnaryOp                Operator
+hi! link typescriptVariable               Keyword
+
+" }}}

.vim/pack/themes/start/dracula_pro/after/syntax/typescriptreact.vim

@@ -0,0 +1,10 @@
+if dracula_pro#should_abort('typescriptreact')
+    finish
+endif
+
+runtime! syntax/typescript.vim
+
+hi! link tsxAttrib           DraculaGreenItalic
+hi! link tsxEqual            Operator
+hi! link tsxIntrinsicTagName Keyword
+hi! link tsxTagName          Type

.vim/pack/themes/start/dracula_pro/after/syntax/vim.vim

@@ -0,0 +1,14 @@
+if dracula_pro#should_abort('vim')
+    finish
+endif
+
+hi! link vimAutoCmdSfxList     Type
+hi! link vimAutoEventList      Type
+hi! link vimEnvVar             Constant
+hi! link vimFunction           Function
+hi! link vimHiBang             Keyword
+hi! link vimOption             Type
+hi! link vimSetMod             Keyword
+hi! link vimSetSep             Delimiter
+hi! link vimUserAttrbCmpltFunc Function
+hi! link vimUserFunc           Function

.vim/pack/themes/start/dracula_pro/after/syntax/xml.vim

@@ -0,0 +1,13 @@
+if dracula_pro#should_abort('xml')
+    finish
+endif
+
+hi! link xmlAttrib  DraculaGreenItalic
+hi! link xmlEqual   Operator
+hi! link xmlTag     Delimiter
+hi! link xmlTagName Statement
+
+" Fixes missing highlight over end tags
+syn region xmlTagName
+	\ matchgroup=xmlTag start=+</[^ /!?<>"']\@=+
+	\ matchgroup=xmlTag end=+>+

.vim/pack/themes/start/dracula_pro/after/syntax/yaml.vim

@@ -0,0 +1,12 @@
+if dracula_pro#should_abort('yaml')
+    finish
+endif
+
+hi! link yamlAlias           DraculaGreenItalicUnderline
+hi! link yamlAnchor          DraculaPinkItalic
+hi! link yamlBlockMappingKey DraculaCyan
+hi! link yamlFlowCollection  DraculaPink
+hi! link yamlFlowIndicator   Delimiter
+hi! link yamlNodeTag         DraculaPink
+hi! link yamlPlainScalar     DraculaYellow
+

.vim/pack/themes/start/dracula_pro/autoload/airline/themes/dracula_pro.vim

@@ -111,7 +111,7 @@ let g:airline#themes#dracula_pro#palette = {
 \       },
 \     ),
 \   'terminal': s:color_map(
-\       ['bg', 'green'],
+\       ['bg', 'purple'],
 \       ['fg', 'comment'],
 \       ['fg', 'selection'],
 \       {

.vim/pack/themes/start/dracula_pro/autoload/dracula_pro.vim

@@ -43,4 +43,15 @@ let g:dracula_pro#palette.color_15 = '#FFFFFF'
 
 " }}}
 
+" Helper function that takes a variadic list of filetypes as args and returns
+" whether or not the execution of the ftplugin should be aborted.
+func! dracula_pro#should_abort(...)
+    if ! exists('g:colors_name') || g:colors_name !~# 'dracula_pro.*'
+        return 1
+    elseif a:0 > 0 && (! exists('b:current_syntax') || index(a:000, b:current_syntax) == -1)
+        return 1
+    endif
+    return 0
+endfunction
+
 " vim: fdm=marker ts=2 sts=2 sw=2 fdl=0:

.vim/pack/themes/start/dracula_pro/colors/dracula_pro_base.vim

@@ -0,0 +1,301 @@
+" Configuration: {{{
+
+if v:version > 580
+  highlight clear
+  if exists('syntax_on')
+    syntax reset
+  endif
+endif
+
+let g:colors_name = 'dracula_pro'
+
+if !(has('termguicolors') && &termguicolors) && !has('gui_running') && &t_Co != 256
+  finish
+endif
+
+" Palette: {{{2
+
+let s:fg        = g:dracula_pro#palette.fg
+
+let s:bglighter = g:dracula_pro#palette.bglighter
+let s:bglight   = g:dracula_pro#palette.bglight
+let s:bg        = g:dracula_pro#palette.bg
+let s:bgdark    = g:dracula_pro#palette.bgdark
+let s:bgdarker  = g:dracula_pro#palette.bgdarker
+
+let s:comment   = g:dracula_pro#palette.comment
+let s:selection = g:dracula_pro#palette.selection
+let s:subtle    = g:dracula_pro#palette.subtle
+
+let s:cyan      = g:dracula_pro#palette.cyan
+let s:green     = g:dracula_pro#palette.green
+let s:orange    = g:dracula_pro#palette.orange
+let s:pink      = g:dracula_pro#palette.pink
+let s:purple    = g:dracula_pro#palette.purple
+let s:red       = g:dracula_pro#palette.red
+let s:yellow    = g:dracula_pro#palette.yellow
+
+let s:none      = ['NONE', 'NONE']
+
+if has('nvim')
+  for s:i in range(16)
+    let g:terminal_color_{s:i} = g:dracula_pro#palette['color_' . s:i]
+  endfor
+endif
+
+if has('terminal')
+  let g:terminal_ansi_colors = []
+  for s:i in range(16)
+    call add(g:terminal_ansi_colors, g:dracula_pro#palette['color_' . s:i])
+  endfor
+endif
+
+" }}}2
+" User Configuration: {{{2
+
+if !exists('g:dracula_bold')
+  let g:dracula_bold = 1
+endif
+
+if !exists('g:dracula_italic')
+  let g:dracula_italic = 1
+endif
+
+if !exists('g:dracula_underline')
+  let g:dracula_underline = 1
+endif
+
+if !exists('g:dracula_undercurl') && g:dracula_underline != 0
+  let g:dracula_undercurl = 1
+endif
+
+if !exists('g:dracula_inverse')
+  let g:dracula_inverse = 1
+endif
+
+if !exists('g:dracula_colorterm')
+  let g:dracula_colorterm = 1
+endif
+
+"}}}2
+" Script Helpers: {{{2
+
+let s:attrs = {
+      \ 'bold': g:dracula_bold == 1 ? 'bold' : 0,
+      \ 'italic': g:dracula_italic == 1 ? 'italic' : 0,
+      \ 'underline': g:dracula_underline == 1 ? 'underline' : 0,
+      \ 'undercurl': g:dracula_undercurl == 1 ? 'undercurl' : 0,
+      \ 'inverse': g:dracula_inverse == 1 ? 'inverse' : 0,
+      \}
+
+function! s:h(scope, fg, ...) " bg, attr_list, special
+  let l:fg = copy(a:fg)
+  let l:bg = get(a:, 1, ['NONE', 'NONE'])
+
+  let l:attr_list = filter(get(a:, 2, ['NONE']), 'type(v:val) == 1')
+  let l:attrs = len(l:attr_list) > 0 ? join(l:attr_list, ',') : 'NONE'
+
+  " Falls back to coloring foreground group on terminals because
+  " nearly all do not support undercurl
+  let l:special = get(a:, 3, ['NONE', 'NONE'])
+  if l:special[0] !=# 'NONE' && l:fg[0] ==# 'NONE' && !has('gui_running')
+    let l:fg[0] = l:special[0]
+    let l:fg[1] = l:special[1]
+  endif
+
+  let l:hl_string = [
+        \ 'highlight!', a:scope,
+        \ 'guifg=' . l:fg[0], 'ctermfg=' . l:fg[1],
+        \ 'guibg=' . l:bg[0], 'ctermbg=' . l:bg[1],
+        \ 'gui=' . l:attrs, 'cterm=' . l:attrs,
+        \ 'guisp=' . l:special[0],
+        \]
+
+  execute join(l:hl_string, ' ')
+endfunction
+
+"}}}2
+" Dracula Highlight Groups: {{{2
+
+call s:h('DraculaBgLight', s:none, s:bglight)
+call s:h('DraculaBgLighter', s:none, s:bglighter)
+call s:h('DraculaBgDark', s:none, s:bgdark)
+call s:h('DraculaBgDarker', s:none, s:bgdarker)
+
+call s:h('DraculaFg', s:fg)
+call s:h('DraculaFgUnderline', s:fg, s:none, [s:attrs.underline])
+call s:h('DraculaFgBold', s:fg, s:none, [s:attrs.bold])
+
+call s:h('DraculaComment', s:comment)
+call s:h('DraculaCommentBold', s:comment, s:none, [s:attrs.bold])
+
+call s:h('DraculaSelection', s:none, s:selection)
+
+call s:h('DraculaSubtle', s:subtle)
+
+call s:h('DraculaCyan', s:cyan)
+call s:h('DraculaCyanItalic', s:cyan, s:none, [s:attrs.italic])
+
+call s:h('DraculaGreen', s:green)
+call s:h('DraculaGreenBold', s:green, s:none, [s:attrs.bold])
+call s:h('DraculaGreenItalic', s:green, s:none, [s:attrs.italic])
+call s:h('DraculaGreenItalicUnderline', s:green, s:none, [s:attrs.italic, s:attrs.underline])
+
+call s:h('DraculaOrange', s:orange)
+call s:h('DraculaOrangeBold', s:orange, s:none, [s:attrs.bold])
+call s:h('DraculaOrangeItalic', s:orange, s:none, [s:attrs.italic])
+call s:h('DraculaOrangeBoldItalic', s:orange, s:none, [s:attrs.bold, s:attrs.italic])
+call s:h('DraculaOrangeInverse', s:bg, s:orange)
+
+call s:h('DraculaPink', s:pink)
+call s:h('DraculaPinkItalic', s:pink, s:none, [s:attrs.italic])
+
+call s:h('DraculaPurple', s:purple)
+call s:h('DraculaPurpleBold', s:purple, s:none, [s:attrs.bold])
+call s:h('DraculaPurpleItalic', s:purple, s:none, [s:attrs.italic])
+
+call s:h('DraculaRed', s:red)
+call s:h('DraculaRedInverse', s:fg, s:red)
+
+call s:h('DraculaYellow', s:yellow)
+call s:h('DraculaYellowItalic', s:yellow, s:none, [s:attrs.italic])
+
+call s:h('DraculaError', s:red, s:none, [], s:red)
+
+call s:h('DraculaErrorLine', s:none, s:none, [s:attrs.undercurl], s:red)
+call s:h('DraculaWarnLine', s:none, s:none, [s:attrs.undercurl], s:orange)
+call s:h('DraculaInfoLine', s:none, s:none, [s:attrs.undercurl], s:cyan)
+
+call s:h('DraculaTodo', s:cyan, s:none, [s:attrs.bold, s:attrs.inverse])
+call s:h('DraculaSearch', s:green, s:none, [s:attrs.inverse])
+call s:h('DraculaBoundary', s:comment, s:bgdark)
+call s:h('DraculaLink', s:cyan, s:none, [s:attrs.underline])
+
+call s:h('DraculaDiffChange', s:orange, s:none)
+call s:h('DraculaDiffText', s:bg, s:orange)
+call s:h('DraculaDiffDelete', s:red, s:bgdark)
+
+" }}}2
+
+" }}}
+" User Interface: {{{
+
+set background=dark
+
+" Required as some plugins will overwrite
+call s:h('Normal', s:fg, g:dracula_colorterm || has('gui_running') ? s:bg : s:none )
+call s:h('StatusLine', s:none, s:bglighter, [s:attrs.bold])
+call s:h('StatusLineNC', s:none, s:bglight)
+call s:h('StatusLineTerm', s:none, s:bglighter, [s:attrs.bold])
+call s:h('StatusLineTermNC', s:none, s:bglight)
+call s:h('WildMenu', s:bg, s:purple, [s:attrs.bold])
+call s:h('CursorLine', s:none, s:subtle)
+
+hi! link ColorColumn  DraculaBgDark
+hi! link CursorColumn CursorLine
+hi! link CursorLineNr DraculaYellow
+hi! link DiffAdd      DraculaGreen
+hi! link DiffAdded    DiffAdd
+hi! link DiffChange   DraculaDiffChange
+hi! link DiffDelete   DraculaDiffDelete
+hi! link DiffRemoved  DiffDelete
+hi! link DiffText     DraculaDiffText
+hi! link Directory    DraculaPurpleBold
+hi! link ErrorMsg     DraculaRedInverse
+hi! link FoldColumn   DraculaSubtle
+hi! link Folded       DraculaBoundary
+hi! link IncSearch    DraculaOrangeInverse
+call s:h('LineNr', s:comment)
+hi! link MoreMsg      DraculaFgBold
+hi! link NonText      DraculaSubtle
+hi! link Pmenu        DraculaBgDark
+hi! link PmenuSbar    DraculaBgDark
+hi! link PmenuSel     DraculaSelection
+hi! link PmenuThumb   DraculaSelection
+hi! link Question     DraculaFgBold
+hi! link Search       DraculaSearch
+call s:h('SignColumn', s:comment)
+hi! link TabLine      DraculaBoundary
+hi! link TabLineFill  DraculaBgDarker
+hi! link TabLineSel   Normal
+hi! link Title        DraculaGreenBold
+hi! link VertSplit    DraculaBoundary
+hi! link Visual       DraculaSelection
+hi! link VisualNOS    Visual
+hi! link WarningMsg   DraculaOrangeInverse
+
+" }}}
+" Syntax: {{{
+
+" Required as some plugins will overwrite
+call s:h('MatchParen', s:green, s:none, [s:attrs.underline])
+call s:h('Conceal', s:cyan, s:none)
+
+" Neovim uses SpecialKey for escape characters only. Vim uses it for that, plus whitespace.
+if has('nvim')
+  hi! link SpecialKey DraculaRed
+  hi! link LspDiagnosticsUnderline DraculaFgUnderline
+  hi! link LspDiagnosticsInformation DraculaCyan
+  hi! link LspDiagnosticsHint DraculaCyan
+  hi! link LspDiagnosticsError DraculaError
+  hi! link LspDiagnosticsWarning DraculaOrange
+  hi! link LspDiagnosticsUnderlineError DraculaErrorLine
+  hi! link LspDiagnosticsUnderlineHint DraculaInfoLine
+  hi! link LspDiagnosticsUnderlineInformation DraculaInfoLine
+  hi! link LspDiagnosticsUnderlineWarning DraculaWarnLine
+else
+  hi! link SpecialKey DraculaSubtle
+endif
+
+hi! link Comment DraculaComment
+hi! link Underlined DraculaFgUnderline
+hi! link Todo DraculaTodo
+
+hi! link Error DraculaError
+hi! link SpellBad DraculaErrorLine
+hi! link SpellLocal DraculaWarnLine
+hi! link SpellCap DraculaInfoLine
+hi! link SpellRare DraculaInfoLine
+
+hi! link Constant DraculaPurple
+hi! link String DraculaYellow
+hi! link Character DraculaPink
+hi! link Number Constant
+hi! link Boolean Constant
+hi! link Float Constant
+
+hi! link Identifier DraculaFg
+hi! link Function DraculaGreen
+
+hi! link Statement DraculaPink
+hi! link Conditional DraculaPink
+hi! link Repeat DraculaPink
+hi! link Label DraculaPink
+hi! link Operator DraculaPink
+hi! link Keyword DraculaPink
+hi! link Exception DraculaPink
+
+hi! link PreProc DraculaPink
+hi! link Include DraculaPink
+hi! link Define DraculaPink
+hi! link Macro DraculaPink
+hi! link PreCondit DraculaPink
+hi! link StorageClass DraculaPink
+hi! link Structure DraculaPink
+hi! link Typedef DraculaPink
+
+hi! link Type DraculaCyanItalic
+
+hi! link Delimiter DraculaFg
+
+hi! link Special DraculaPink
+hi! link SpecialComment DraculaCyanItalic
+hi! link Tag DraculaCyan
+hi! link helpHyperTextJump DraculaLink
+hi! link helpCommand DraculaPurple
+hi! link helpExample DraculaGreen
+hi! link helpBacktick Special
+
+"}}}
+
+" vim: fdm=marker ts=2 sts=2 sw=2 fdl=0 et:

.vim/pack/themes/start/dracula_pro/doc/dracula_pro.txt

@@ -75,10 +75,6 @@ Include bold attributes in highlighting >
 Include italic attributes in highlighting >
     let g:dracula_italic = 1
 
-* *g:dracula_strikethrough*
-Include strikethrough attributes in highlighting >
-    let g:dracula_strikethrough = 1
-
 * *g:dracula_underline*
 Include underline attributes in highlighting >
     let g:dracula_underline = 1
@@ -87,18 +83,6 @@ Include underline attributes in highlighting >
 Include undercurl attributes in highlighting (only if underline enabled) >
     let g:dracula_undercurl = 1
 
-* *g:dracula_full_special_attrs_support*
-Explicitly declare full support for special attributes. By default it is 1
-for graphical applications and 0 for terminals and terminal emulators.  On
-terminal emulators, set to 1 to allow underline/undercurl highlights without
-changing the foreground color. >
-    let g:dracula_full_special_attrs_support = 1
-
-* *g:dracula_high_contrast_diff*
-Use high-contrast color when in diff mode. By default it is disabled, set to
-1 to enable it.
-   let g:dracula_high_contrast_diff = 1
-
 * *g:dracula_inverse*
 Include inverse attributes in highlighting >
     let g:dracula_inverse = 1
@@ -110,46 +94,20 @@ Include background fill colors >
 ================================================================================
 CUSTOMIZATION                                        *dracula-pro-customization*
 
-
 Like all colorschemes, Dracula PRO is easy to customize with |autocmd|. Make use
-of the |ColorScheme| event as in the following examples. Like all autocommands,
+of the |ColorScheme| event as in the following examples.
-it's best to put all of your personal changes in an |augroup|: >
 
-    augroup DraculaCustomization
+It would be a good idea to put all of your personal changes in an |augroup|,
-      autocmd!
+which you can do with the following code: >
-      " Change the highlight group used with vim-gitgutter.
+    augroup dracula_customization
-      autocmd ColorScheme dracula highlight! link GitGutterDelete DraculaRed
+      au!
+      " autocmds...
     augroup END
+>
 
-    colorscheme dracula
+- To add underline styling to |hl-CursorLine|, you can use the following: >
+    autocmd ColorScheme dracula_pro* hi CursorLine cterm=underline term=underline
 <
-
-The autocommand must be defined before the colorscheme is set. To overwrite
-any highlight link that is already established in `colors/dracula.vim`, you
-will need to use the bang (!) modifier on the |hi-link| command.
-
-For more than one customization, it will be easier to define a function that
-can be called from the autocommand: >
-
-    function! s:customize_dracula() abort
-      " Link a highlight group to a predefined highlight group.
-      " See `colors/dracula.vim` for all predefined highlight groups.
-      " To overwrite a highlight link created in `colors/dracula.vim`, you
-      " will need to use the bang (!) modifier
-      highlight! link GitGutterDelete DraculaRed
-
-      " Customize existing highlight groups, for example adding underline.
-      highlight CursorLine cterm=underline term=underline
-    endfunction
-
-    augroup DraculaCustomization
-      autocmd!
-      autocmd ColorScheme dracula call s:customize_dracula()
-    augroup END
-
-    colorscheme dracula
-<
-
 ================================================================================
 LICENSE                                                    *dracula-pro-license*
 

.vimrc

@@ -1,3 +1,5 @@
+" Sravan's Vimrc
+
 " Don't try to be vi compatible
 set nocompatible
 
@@ -79,11 +81,9 @@ set wildmenu
 set lazyredraw
 set showmatch
 
-" Add Dracula Themes
+" Dracula Theme
 packadd! dracula
 packadd! dracula_pro
-
-" Enable Dracula Pro Theme
-syntax enable
 let g:dracula_colorterm = 0
 colorscheme dracula_pro
+

.xinitrc

@@ -0,0 +1,19 @@
+#########################
+# ENVIRONMENT VARIABLES #
+#########################
+export TERM=xterm-256color           # Sets the terminal type
+export SHELL=/usr/bin/fish           # Preferred shell
+export EDITOR="code -w"              # Default editor
+export BROWSER=brave                 # Web Browser
+export XDG_CONFIG_HOME=$HOME/.config # Set Config directory
+export QT_QPA_PLATFORMTHEME=qt5ct    # QGtkStyle
+
+###########
+# STARTUP #
+###########
+xrdb ~/.Xresources
+
+##################
+# WINDOW MANAGER #
+##################
+exec dwm

.zshrc

@@ -0,0 +1,126 @@
+# If you come from bash you might have to change your $PATH.
+# export PATH=$HOME/bin:/usr/local/bin:$PATH
+
+# Path to your oh-my-zsh installation.
+export ZSH="/home/sravan/.oh-my-zsh"
+
+# Set name of the theme to load --- if set to "random", it will
+# load a random theme each time oh-my-zsh is loaded, in which case,
+# to know which specific one was loaded, run: echo $RANDOM_THEME
+# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
+ZSH_THEME="robbyrussell"
+
+# Set list of themes to pick from when loading at random
+# Setting this variable when ZSH_THEME=random will cause zsh to load
+# a theme from this variable instead of looking in $ZSH/themes/
+# If set to an empty array, this variable will have no effect.
+# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
+
+# Uncomment the following line to use case-sensitive completion.
+# CASE_SENSITIVE="true"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+# Uncomment the following line to disable bi-weekly auto-update checks.
+# DISABLE_AUTO_UPDATE="true"
+
+# Uncomment the following line to automatically update without prompting.
+# DISABLE_UPDATE_PROMPT="true"
+
+# Uncomment the following line to change how often to auto-update (in days).
+# export UPDATE_ZSH_DAYS=13
+
+# Uncomment the following line if pasting URLs and other text is messed up.
+# DISABLE_MAGIC_FUNCTIONS=true
+
+# Uncomment the following line to disable colors in ls.
+# DISABLE_LS_COLORS="true"
+
+# Uncomment the following line to disable auto-setting terminal title.
+# DISABLE_AUTO_TITLE="true"
+
+# Uncomment the following line to enable command auto-correction.
+# ENABLE_CORRECTION="true"
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+COMPLETION_WAITING_DOTS="true"
+
+# Uncomment the following line if you want to disable marking untracked files
+# under VCS as dirty. This makes repository status check for large repositories
+# much, much faster.
+# DISABLE_UNTRACKED_FILES_DIRTY="true"
+
+# Uncomment the following line if you want to change the command execution time
+# stamp shown in the history command output.
+# You can set one of the optional three formats:
+# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
+# or set a custom format using the strftime function format specifications,
+# see 'man strftime' for details.
+# HIST_STAMPS="mm/dd/yyyy"
+
+# Would you like to use another custom folder than $ZSH/custom?
+# ZSH_CUSTOM=/path/to/new-custom-folder
+
+# Which plugins would you like to load?
+# Standard plugins can be found in $ZSH/plugins/
+# Custom plugins may be added to $ZSH_CUSTOM/plugins/
+# Example format: plugins=(rails git textmate ruby lighthouse)
+# Add wisely, as too many plugins slow down shell startup.
+plugins=(alias-finder docker git python tmux vscode zsh_reload)
+
+source $ZSH/oh-my-zsh.sh
+
+# User configuration
+
+# export MANPATH="/usr/local/man:$MANPATH"
+
+# You may need to manually set your language environment
+# export LANG=en_US.UTF-8
+
+# Preferred editor for local and remote sessions
+if [[ -n $SSH_CONNECTION ]]; then
+  export EDITOR='code -w'
+else
+  export EDITOR='code -w'
+fi
+
+# Compilation flags
+# export ARCHFLAGS="-arch x86_64"
+
+# Set personal aliases, overriding those provided by oh-my-zsh libs,
+# plugins, and themes. Aliases can be placed here, though oh-my-zsh
+# users are encouraged to define aliases within the ZSH_CUSTOM folder.
+# For a full list of active aliases, run `alias`.
+#
+# Example aliases
+# alias zshconfig="mate ~/.zshrc"
+# alias ohmyzsh="mate ~/.oh-my-zsh"
+
+# Powerline Shell
+function powerline_precmd() {
+    PS1="$(powerline-shell --shell zsh $?)"
+}
+
+function install_powerline_precmd() {
+  for s in "${precmd_functions[@]}"; do
+    if [ "$s" = "powerline_precmd" ]; then
+      return
+    fi
+  done
+  precmd_functions+=(powerline_precmd)
+}
+
+if [ "$TERM" != "linux" ]; then
+    install_powerline_precmd
+fi
+
+# Run neofetch when opening terminal
+neofetch
+
+# ALIASES
+alias config='/usr/bin/git --git-dir=$HOME/.cfg/ --work-tree=$HOME'
+
+# EXPORTS
+export TERM=xterm-256color

README.md

@@ -0,0 +1,37 @@
+# dotfiles
+
+Personal dotfiles repository
+
+## Install on a new system
+
+See [Acknowledgements](#Acknowledgements) for tutorial source.
+
+* Prior to the installation, create alias for config
+  * `alias config="GIT_WORK_TREE=~ GIT_DIR=~/.cfg"`
+* Add `.cfg` to `.gitignore`
+  * `echo ".cfg" >> .gitignore`
+* Clone dotfiles into a bare repository
+  * `git clone --bare <git-repo-url> $HOME/.cfg`
+* Define the alias in the current shell scope
+  * `alias config="GIT_WORK_TREE=~ GIT_DIR=~/.cfg"`
+* Checkout content from bare repository to `$HOME`
+  * `config git checkout`
+* Step above might fail with a message like:
+  * ```
+    error: The following untracked working tree files would be overwritten by checkout:
+        .bashrc
+        .gitignore
+    Please move or remove them before you can switch branches.
+    Aborting
+    ```
+* Delete `.bashrc` and `.gitignore`
+  * `rm ~/.bashrc ~/.gitignore`
+* Re-run checkout
+  * `config git checkout`
+* Set the flag `showUntrackedFiles` to `no` on this specific (local) repo
+  * `config git config --local status.showUntrackedFiles no`
+
+## Acknowledgements
+
+I followed [DistroTube](https://www.youtube.com/channel/UCVls1GmFKf6WlTraIb_IaJg)'s process for setting up a git bare repository as shown in [Git Bare Repository - A Better Way To Manage Dotfiles](https://youtu.be/tBoLDpTWVOM).
+He references [The best way to store your dotfiles: A bare Git repository](https://www.atlassian.com/git/tutorials/dotfiles) by [Nicola Paolucci](https://www.durdn.com/).

alacritty/.config/alacritty/alacritty.yml

@@ -1,583 +0,0 @@
-# Any items in the `env` entry below will be added as
-# environment variables. Some entries may override variables
-# set by alacritty itself.
-#env:
-# TERM variable
-#
-# This value is used to set the `$TERM` environment variable for
-# each instance of Alacritty. If it is not present, alacritty will
-# check the local terminfo database and use `alacritty` if it is
-# available, otherwise `xterm-256color` is used.
-#TERM: alacritty
-
-window:
-    # Window dimensions (changes require restart)
-    #
-    # Specified in number of columns/lines, not pixels.
-    # If both are `0`, this setting is ignored.
-    #dimensions:
-    #  columns: 0
-    #  lines: 0
-
-    # Window position (changes require restart)
-    #
-    # Specified in number of pixels.
-    # If the position is not set, the window manager will handle the placement.
-    #position:
-    #  x: 0
-    #  y: 0
-
-    # Window padding (changes require restart)
-    #
-    # Blank space added around the window in pixels. This padding is scaled
-    # by DPI and the specified value is always added at both opposing sides.
-    padding:
-        x: 5
-        y: 5
-
-    # Spread additional padding evenly around the terminal content.
-    #dynamic_padding: false
-
-    # Window decorations
-    #
-    # Values for `decorations`:
-    #     - full: Borders and title bar
-    #     - none: Neither borders nor title bar
-    #
-    # Values for `decorations` (macOS only):
-    #     - transparent: Title bar, transparent background and title bar buttons
-    #     - buttonless: Title bar, transparent background, but no title bar buttons
-    #decorations: full
-
-    # Startup Mode (changes require restart)
-    #
-    # Values for `startup_mode`:
-    #   - Windowed
-    #   - Maximized
-    #   - Fullscreen
-    #
-    # Values for `startup_mode` (macOS only):
-    #   - SimpleFullscreen
-    #startup_mode: Windowed
-
-    # Window title
-    #title: Alacritty
-
-    # Window class (Linux/BSD only):
-    # class:
-    #   Application instance name
-    #   instance: Alacritty
-    #   General application class
-    #   general: Alacritty
-
-    # GTK theme variant (Linux/BSD only)
-    #
-    # Override the variant of the GTK theme. Commonly supported values are `dark` and `light`.
-    # Set this to `None` to use the default theme variant.
-    #gtk_theme_variant: None
-
-#scrolling:
-# Maximum number of lines in the scrollback buffer.
-# Specifying '0' will disable scrolling.
-#history: 10000
-
-# Number of lines the viewport will move for every line scrolled when
-# scrollback is enabled (history > 0).
-#multiplier: 3
-
-# Font configuration
-font:
-    # Normal (roman) font face
-    normal:
-        # Font family
-        #
-        # Default:
-        #   - (macOS) Menlo
-        #   - (Linux/BSD) monospace
-        #   - (Windows) Consolas
-        family: MonaspiceNe NF
-
-        # The `style` can be specified to pick a specific face.
-        style: Regular
-
-    # Bold font face
-    bold:
-        # Font family
-        #
-        # If the bold family is not specified, it will fall back to the
-        # value specified for the normal font.
-        family: MonaspiceNe NF
-
-        # The `style` can be specified to pick a specific face.
-        style: Bold
-
-    # Italic font face
-    #italic:
-    # Font family
-    #
-    # If the italic family is not specified, it will fall back to the
-    # value specified for the normal font.
-    #family: monospace
-
-    # The `style` can be specified to pick a specific face.
-    #style: Italic
-
-    # Bold italic font face
-    #bold_italic:
-    # Font family
-    #
-    # If the bold italic family is not specified, it will fall back to the
-    # value specified for the normal font.
-    #family: monospace
-
-    # The `style` can be specified to pick a specific face.
-    #style: Bold Italic
-
-    # Point size
-    size: 8.0
-
-    # Offset is the extra space around each character. `offset.y` can be thought of
-    # as modifying the line spacing, and `offset.x` as modifying the letter spacing.
-    #offset:
-    #  x: 0
-    #  y: 0
-
-    # Glyph offset determines the locations of the glyphs within their cells with
-    # the default being at the bottom. Increasing `x` moves the glyph to the right,
-    # increasing `y` moves the glyph upwards.
-    #glyph_offset:
-    #  x: 0
-    #  y: 0
-
-    # Thin stroke font rendering (macOS only)
-    #
-    # Thin strokes are suitable for retina displays, but for non-retina screens
-    # it is recommended to set `use_thin_strokes` to `false`
-    #
-    # macOS >= 10.14.x:
-    #
-    # If the font quality on non-retina display looks bad then set
-    # `use_thin_strokes` to `true` and enable font smoothing by running the
-    # following command:
-    #   `defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO`
-    #
-    # This is a global setting and will require a log out or restart to take
-    # effect.
-    #use_thin_strokes: true
-
-# If `true`, bold text is drawn using the bright color variants.
-#draw_bold_text_with_bright_colors: false
-
-colors:
-    # Default colors
-    primary:
-        background: "0x22212c"
-        foreground: "0xf8f8f2"
-
-        # Bright and dim foreground colors
-        #
-        # The dimmed foreground color is calculated automatically if it is not present.
-        # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors`
-        # is `false`, the normal foreground color will be used.
-        #dim_foreground: '0x9a9a9a'
-        #bright_foreground: '0xffffff'
-
-    # Cursor colors
-    #
-    # Colors which should be used to draw the terminal cursor. If these are unset,
-    # the cursor color will be the inverse of the cell color.
-    cursor:
-        text: "0x454158"
-        cursor: "0xf8f8f2"
-
-    # Selection colors
-    #
-    # Colors which should be used to draw the selection area. If selection
-    # background is unset, selection color will be the inverse of the cell colors.
-    # If only text is unset the cell text color will remain the same.
-    selection:
-        text: "0xf8f8f2"
-        background: "0x454158"
-
-    # Normal colors
-    normal:
-        black: "0x22212c"
-        red: "0xff9580"
-        green: "0x8aff80"
-        yellow: "0xffff80"
-        blue: "0x9580ff"
-        magenta: "0xff80bf"
-        cyan: "0x80ffea"
-        white: "0xf8f8f2"
-
-    # Bright colors
-    bright:
-        black: "0x22212c"
-        red: "0xffaa99"
-        green: "0xa2ff99"
-        yellow: "0xffff99"
-        blue: "0xaa99ff"
-        magenta: "0xff99cc"
-        cyan: "0x99ffee"
-        white: "0xffffff"
-
-        # Indexed Colors
-        #
-        # The indexed colors include all colors from 16 to 256.
-        # When these are not set, they're filled with sensible defaults.
-        #
-        # Example:
-        #   `- { index: 16, color: '0xff00ff' }`
-        #
-        indexed_colors: []
-
-# Bell
-#
-# The bell is rung every time the BEL control character is received.
-#bell:
-  # Visual Bell Animation
-  #
-  # Animation effect for flashing the screen when the visual bell is rung.
-  #
-  # Values for `animation`:
-  #   - Ease
-  #   - EaseOut
-  #   - EaseOutSine
-  #   - EaseOutQuad
-  #   - EaseOutCubic
-  #   - EaseOutQuart
-  #   - EaseOutQuint
-  #   - EaseOutExpo
-  #   - EaseOutCirc
-  #   - Linear
-  #animation: EaseOutExpo
-
-  # Duration of the visual bell flash in milliseconds. A `duration` of `0` will
-  # disable the visual bell animation.
-  #duration: 0
-
-  # Visual bell animation color.
-  #color: '#ffffff'
-
-  # Bell Command
-  #
-  # This program is executed whenever the bell is rung.
-  #
-  # When set to `command: None`, no command will be executed.
-  #
-  # Example:
-  #   command:
-  #     program: notify-send
-  #     args: ["Hello, World!"]
-  #
-  #command: None
-
-# Background opacity
-#
-# Window opacity as a floating point number from `0.0` to `1.0`.
-# The value `0.0` is completely transparent and `1.0` is opaque.
-# background_opacity: 1.0
-background_opacity: 0.8
-
-#selection:
-#semantic_escape_chars: ",│`|:\"' ()[]{}<>\t"
-
-# When set to `true`, selected text will be copied to the primary clipboard.
-#save_to_clipboard: false
-
-# Allow terminal applications to change Alacritty's window title.
-#dynamic_title: true
-
-cursor:
-    # Cursor style
-    #
-    # Values for `style`:
-    #   - ▇ Block
-    #   - _ Underline
-    #   - | Beam
-    style: Beam
-
-    # If this is `true`, the cursor will be rendered as a hollow box when the
-    # window is not focused.
-    #unfocused_hollow: true
-
-# Live config reload (changes require restart)
-live_config_reload: true
-
-# Shell
-#
-# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`.
-# Entries in `shell.args` are passed unmodified as arguments to the shell.
-#
-# Default:
-#   - (macOS) /bin/bash --login
-#   - (Linux/BSD) user login shell
-#   - (Windows) powershell
-shell:
-    program: /usr/bin/fish
-    # args:
-    #   - -l
-    #   - -c
-    #   - "tmux attach || tmux"
-
-# Startup directory
-#
-# Directory the shell is started in. If this is unset, or `None`, the working
-# directory of the parent process will be used.
-#working_directory: None
-
-# WinPTY backend (Windows only)
-#
-# Alacritty defaults to using the newer ConPTY backend if it is available,
-# since it resolves a lot of bugs and is quite a bit faster. If it is not
-# available, the the WinPTY backend will be used instead.
-#
-# Setting this option to `true` makes Alacritty use the legacy WinPTY backend,
-# even if the ConPTY backend is available.
-#winpty_backend: false
-
-# Send ESC (\x1b) before characters when alt is pressed.
-#alt_send_esc: true
-
-# mouse:
-  # Click settings
-  #
-  # The `double_click` and `triple_click` settings control the time
-  # alacritty should wait for accepting multiple clicks as one double
-  # or triple click.
-  #double_click: { threshold: 300 }
-  #triple_click: { threshold: 300 }
-
-  # If this is `true`, the cursor is temporarily hidden when typing.
-  #hide_when_typing: false
-
-# Regex hints
-#
-# Terminal hints can be used to find text in the visible part of the terminal
-# and pipe it to other applications.
-#hints:
-  # Keys used for the hint labels.
-  #alphabet: "jfkdls;ahgurieowpq"
-
-  # List with all available hints
-  #
-  # Each hint must have a `regex` and either an `action` or a `command` field.
-  # The fields `mouse`, `binding` and `post_processing` are optional.
-  #
-  # The fields `command`, `binding.key`, `binding.mods` and `mouse.mods` accept
-  # the same values as they do in the `key_bindings` section.
-  #
-  # The `mouse.enabled` field controls if the hint should be underlined while
-  # the mouse with all `mouse.mods` keys held or the vi mode cursor is above it.
-  #
-  # If the `post_processing` field is set to `true`, heuristics will be used to
-  # shorten the match if there are characters likely not to be part of the hint
-  # (e.g. a trailing `.`). This is most useful for URIs.
-  #
-  # Values for `action`:
-  #   - Copy
-  #       Copy the hint's text to the clipboard.
-  #   - Paste
-  #       Paste the hint's text to the terminal or search.
-  #   - Select
-  #       Select the hint's text.
-  #   - MoveViModeCursor
-  #       Move the vi mode cursor to the beginning of the hint.
-  #enabled:
-  # - regex: "(mailto:|gemini:|gopher:|https:|http:|news:|file:|git:|ssh:|ftp:)\
-  #           [^\u0000-\u001F\u007F-\u009F<>\"\\s{-}\\^⟨⟩`]+"
-  #   command: xdg-open
-  #   post_processing: true
-  #   mouse:
-  #     enabled: true
-  #     mods: None
-  #   binding:
-  #     key: U
-  #     mods: Control|Shift
-
-# Mouse bindings
-#
-# Mouse bindings are specified as a list of objects, much like the key
-# bindings further below.
-#
-# To trigger mouse bindings when an application running within Alacritty captures the mouse, the
-# `Shift` modifier is automatically added as a requirement.
-#
-# Each mouse binding will specify a:
-#
-# - `mouse`:
-#
-#   - Middle
-#   - Left
-#   - Right
-#   - Numeric identifier such as `5`
-#
-# - `action` (see key bindings)
-#
-# And optionally:
-#
-# - `mods` (see key bindings)
-#mouse_bindings:
-#  - { mouse: Middle, action: PasteSelection }
-
-# Key bindings
-#
-# Key bindings are specified as a list of objects. For example, this is the
-# default paste binding:
-#
-# `- { key: V, mods: Control|Shift, action: Paste }`
-#
-# Each key binding will specify a:
-#
-# - `key`: Identifier of the key pressed
-#
-#    - A-Z
-#    - F1-F24
-#    - Key0-Key9
-#
-#    A full list with available key codes can be found here:
-#    https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants
-#
-#    Instead of using the name of the keys, the `key` field also supports using
-#    the scancode of the desired key. Scancodes have to be specified as a
-#    decimal number. This command will allow you to display the hex scancodes
-#    for certain keys:
-#
-#       `showkey --scancodes`.
-#
-# Then exactly one of:
-#
-# - `chars`: Send a byte sequence to the running application
-#
-#    The `chars` field writes the specified string to the terminal. This makes
-#    it possible to pass escape sequences. To find escape codes for bindings
-#    like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside
-#    of tmux. Note that applications use terminfo to map escape sequences back
-#    to keys. It is therefore required to update the terminfo when changing an
-#    escape sequence.
-#
-# - `action`: Execute a predefined action
-#
-#   - Copy
-#   - Paste
-#   - PasteSelection
-#   - IncreaseFontSize
-#   - DecreaseFontSize
-#   - ResetFontSize
-#   - ScrollPageUp
-#   - ScrollPageDown
-#   - ScrollLineUp
-#   - ScrollLineDown
-#   - ScrollToTop
-#   - ScrollToBottom
-#   - ClearHistory
-#   - Hide
-#   - Minimize
-#   - Quit
-#   - ToggleFullscreen
-#   - SpawnNewInstance
-#   - ClearLogNotice
-#   - ReceiveChar
-#   - None
-#
-#   (macOS only):
-#   - ToggleSimpleFullscreen: Enters fullscreen without occupying another space
-#
-# - `command`: Fork and execute a specified command plus arguments
-#
-#    The `command` field must be a map containing a `program` string and an
-#    `args` array of command line parameter strings. For example:
-#       `{ program: "alacritty", args: ["-e", "vttest"] }`
-#
-# And optionally:
-#
-# - `mods`: Key modifiers to filter binding actions
-#
-#    - Command
-#    - Control
-#    - Option
-#    - Super
-#    - Shift
-#    - Alt
-#
-#    Multiple `mods` can be combined using `|` like this:
-#       `mods: Control|Shift`.
-#    Whitespace and capitalization are relevant and must match the example.
-#
-# - `mode`: Indicate a binding for only specific terminal reported modes
-#
-#    This is mainly used to send applications the correct escape sequences
-#    when in different modes.
-#
-#    - AppCursor
-#    - AppKeypad
-#    - Alt
-#
-#    A `~` operator can be used before a mode to apply the binding whenever
-#    the mode is *not* active, e.g. `~Alt`.
-#
-# Bindings are always filled by default, but will be replaced when a new
-# binding with the same triggers is defined. To unset a default binding, it can
-# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for
-# a no-op if you do not wish to receive input characters for that binding.
-#
-# If the same trigger is assigned to multiple actions, all of them are executed
-# at once.
-#key_bindings:
-# (Windows, Linux, and BSD only)
-#- { key: V,        mods: Control|Shift, action: Paste            }
-#- { key: C,        mods: Control|Shift, action: Copy             }
-#- { key: Insert,   mods: Shift,         action: PasteSelection   }
-#- { key: Key0,     mods: Control,       action: ResetFontSize    }
-#- { key: Equals,   mods: Control,       action: IncreaseFontSize }
-#- { key: Add,      mods: Control,       action: IncreaseFontSize }
-#- { key: Subtract, mods: Control,       action: DecreaseFontSize }
-#- { key: Minus,    mods: Control,       action: DecreaseFontSize }
-
-# (Windows only)
-#- { key: Return,   mods: Alt,           action: ToggleFullscreen }
-
-# (macOS only)
-#- { key: Key0,   mods: Command,         action: ResetFontSize    }
-#- { key: Equals, mods: Command,         action: IncreaseFontSize }
-#- { key: Add,    mods: Command,         action: IncreaseFontSize }
-#- { key: Minus,  mods: Command,         action: DecreaseFontSize }
-#- { key: K,      mods: Command,         action: ClearHistory     }
-#- { key: K,      mods: Command,         chars: "\x0c"            }
-#- { key: V,      mods: Command,         action: Paste            }
-#- { key: C,      mods: Command,         action: Copy             }
-#- { key: H,      mods: Command,         action: Hide             }
-#- { key: M,      mods: Command,         action: Minimize         }
-#- { key: Q,      mods: Command,         action: Quit             }
-#- { key: W,      mods: Command,         action: Quit             }
-#- { key: F,      mods: Command|Control, action: ToggleFullscreen }
-
-#- { key: Paste,                    action: Paste                            }
-#- { key: Copy,                     action: Copy                             }
-#- { key: L,         mods: Control, action: ClearLogNotice                   }
-#- { key: L,         mods: Control, chars: "\x0c"                            }
-#- { key: PageUp,    mods: Shift,   action: ScrollPageUp,   mode: ~Alt       }
-#- { key: PageDown,  mods: Shift,   action: ScrollPageDown, mode: ~Alt       }
-#- { key: Home,      mods: Shift,   action: ScrollToTop,    mode: ~Alt       }
-#- { key: End,       mods: Shift,   action: ScrollToBottom, mode: ~Alt       }
-
-#debug:
-# Display the time it takes to redraw each frame.
-#render_timer: false
-
-# Keep the log file after quitting Alacritty.
-#persistent_logging: false
-
-# Log level
-#
-# Values for `log_level`:
-#   - None
-#   - Error
-#   - Warn
-#   - Info
-#   - Debug
-#   - Trace
-#log_level: Warn
-
-# Print all received window events.
-#print_events: false

autorandr/.config/autorandr/postswitch

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-# Check if screen is not currently locked
-if ! pgrep -x "i3lock" > /dev/null
-then
-    # Restart session
-    $HOME/.scripts/session.sh --restart &
-fi
-
-# Disable & Re-Enable Compositor
-$HOME/.scripts/picom.sh --on &
-
-# NVIDIA Force Composition Pipeline
-/usr/bin/nvidia-force-comp-pipeline &
-
-# Restore wallpaper
-/usr/bin/nitrogen --restore &
-
-# Update lock screen wallpaper
-/usr/bin/betterlockscreen -u \
-    $HOME/Data/NextCloud/Wallpapers/Desktop/Solar_System.png &

awesome/.config/awesome

@@ -1 +0,0 @@
-Subproject commit c1745d66224cc203d5bb5311c06356a1a15e6b9c

betterlockscreen/.config/betterlockscreen/betterlockscreenrc

@@ -1,41 +0,0 @@
-display_on=0
-span_image=false
-lock_timeout=300
-fx_list=(dim blur dimblur pixel dimpixel color)
-dim_level=40
-blur_level=1
-pixel_scale=10,1000
-solid_color=333333
-wallpaper_cmd="feh --bg-fill"
-# i3lockcolor_bin="i3lock-color" # Manually set command for i3lock-color
-
-loginbox=282a36ff
-loginshadow=282a36ff
-locktext="Enter password to unlock..."
-font="sans-serif"
-ringcolor=44475aff
-insidecolor=00000000
-separatorcolor=00000000
-ringvercolor=50fa7bff
-insidevercolor=50fa7bff
-ringwrongcolor=ff5555ff
-insidewrongcolor=ff5555ff
-timecolor=f8f8f2ff
-time_format="%X"
-greetercolor=f8f8f2ff
-layoutcolor=f8f8f2ff
-keyhlcolor=bd93f9ff
-bshlcolor=8be9fdff
-verifcolor=50fa7bff
-wrongcolor=ff5555ff
-modifcolor=ff5555ff
-bgcolor=282a36ff
-
-prelock() {
-    $HOME/.scripts/dunst.sh --pause
-}
-
-# custom postlock
-postlock() {
-    $HOME/.scripts/dunst.sh --unpause
-}

blender/.themes/dracula-blender

@@ -1 +0,0 @@
-Subproject commit b10e76d4dc8dceca829ae51e530eaa9ba111fe89

brightness/.scripts/brightness.sh

@@ -1,52 +0,0 @@
-#!/usr/bin/env bash
-help_menu() {
-    echo "Script to control brightness. Use only one argument at a time."
-    # echo "  - Play / Pause:  playerctl.sh --play-pause"
-    # echo "  - Next:          playerctl.sh --next"
-    # echo "  - Previous:      playerctl.sh --prev"
-    # echo "  - Change Player: playerctl.sh --change"
-    # echo "  - Rofi Menu:     playerctl.sh --rofi"
-    # echo "  - Help:          playerctl.sh --help OR playerctl.sh -h"
-}
-
-rofi_menu() {
-    declare -a options=(
-        "󰃠 Raise Brightness - raise"
-        "󰃞 Lower Brightness - lower"
-        "󰌍 Back - back"
-        "󰗼 Quit - quit"
-    )
-
-    choice=$(printf '%s\n' "${options[@]}" | rofi -dmenu -i)
-    option=$(printf '%s\n' "${choice}" | awk '{print $NF}')
-
-    if [[ "$option" == "quit" ]]; then
-        pkill rofi
-    elif [[ "$option" != "back" ]]; then
-        main "--$option" && main "--rofi"
-    fi
-}
-
-main() {
-    if [ $# -eq 0 ]; then
-        # No arguments
-        help_menu
-    else
-        case $1 in
-        --help | -h)
-            help_menu
-            ;;
-        --raise)
-            brightnessctl -c backlight s 10%+
-            ;;
-        --lower)
-            brightnessctl -c backlight s 10%-
-            ;;
-        --rofi)
-            rofi_menu
-            ;;
-        esac
-    fi
-}
-
-main $@

calibre/.themes/dracula-calibre

@@ -1 +0,0 @@
-Subproject commit ff1091e19e4e74beffebe2651234da7bcde75b20

deadd/.config/deadd/deadd.css

@@ -1,141 +0,0 @@
-.blurredBG, #main_window, .blurredBG.low, .blurredBG.normal {
-    background: rgba(40, 42, 54, 1.0);
-    border: 2px #50fa7b solid;
-    border-radius: 10px;
-}
-
-.noti-center.time {
-    font-size: 32px;
-    margin-left: 10px;
-    margin-right: 10px;
-}
-
-.title {
-    font-weight: bold;
-    font-size: 16px;
-    margin-left: 10px;
-    margin-right: 10px;
-}
-
-.body {
-    font-weight: normal;
-    font-size: 16px;
-    margin-left: 10px;
-    margin-right: 10px;
-}
-
-.appname {
-    font-size: 12px;
-    margin-left: 10px;
-    margin-right: 10px;
-}
-
-.time {
-    font-size: 12px;
-    margin-left: 10px;
-    margin-right: 10px;
-}
-
-.blurredBG.notification {
-    background:  rgba(40, 42, 54, 1.0);
-    border: 2pt #50fa7b solid;
-    border-radius: 10px;
-}
-
-.blurredBG.notification.critical {
-    background: rgba(255, 85, 85, 1.0);
-    border: 2pt #50fa7b solid;
-    border-radius: 10px;
-}
-
-.notificationInCenter.critical {
-    background: rgba(255, 85, 85, 1.0);
-}
-
-label {
-    color: #f8f8f2;
-}
-
-label.notification {
-    color: #f8f8f2;
-}
-
-label.critical {
-    color: #f8f8f2;
-}
-.notificationInCenter label.critical {
-    color: #f8f8f2;
-}
-
-button {
-    border-radius: 10px;
-    background:  rgba(40, 42, 54, 1.0);
-    border-width: 2px;
-    color: #f8f8f2;
-}
-
-button:hover {
-    border-radius: 10px;
-    background: rgba(68, 71, 90, 0.8);
-    border-width: 2px;
-    border-color: #50fa7b;
-    color: #282a36;
-}
-
-.userbutton {
-    border-radius: 10px;
-    background:  rgba(40, 42, 54, 1.0);
-    border-width: 2px;
-}
-
-.userbutton:hover {
-    border-radius: 10px;
-    background: rgba(68, 71, 90, 1.0);
-    border-width: 2px;
-    border-color: #50fa7b;
-}
-
-.userbuttonlabel {
-    color: #f8f8f2;
-    font-size: 12px;
-}
-
-.userbuttonlabel:hover {
-    color: #f8f8f2;
-}
-
-button.buttonState1 {
-    background: rgba(20,0,0,0.5);
-}
-
-.userbuttonlabel.buttonState1 {
-    color: #fff;
-}
-
-button.buttonState1:hover {
-    background: rgba(20,0,0, 0.4);
-}
-
-.userbuttonlabel.buttonState1:hover {
-    color: #111;
-}
-
-button.buttonState2 {
-    background: rgba(255,255,255,0.3);
-}
-
-.userbuttonlabel.buttonState2 {
-    color: #111;
-}
-
-button.buttonState2:hover {
-    background: rgba(20,0,0, 0.3);
-}
-
-.userbuttonlabel.buttonState2:hover {
-    color: #000;
-}
-
-image.deadd-noti-center.notification.image {
-    margin-left: 10px;
-}

deadd/.config/deadd/deadd.yml

@@ -1,225 +0,0 @@
-### Margins for notification-center/notifications
-margin-top: 35
-margin-right: 10
-
-### Margins for notification-center
-margin-bottom: 10
-
-### Width of the notification center/notifications in pixels.
-width: 700
-
-### Command to run at startup. This can be used to setup
-### button states.
-# startup-command: deadd-notification-center-startup
-
-### Monitor on which the notification center/notifications will be
-### printed. If "follow-mouse" is set true, this does nothing.
-monitor: 0
-
-### If true, the notification center/notifications will open on the
-### screen, on which the mouse is. Overrides the "monitor" setting.
-follow-mouse: true
-
-notification-center:
-  ### Margin at the top/right/bottom of the notification center in
-  ### pixels. This can be used to avoid overlap between the notification
-  ### center and bars such as polybar or i3blocks.
-  # margin-top: 0
-  # margin-right: 0
-  # margin-bottom: 0
-
-  ### Width of the notification center in pixels.
-  # width: 500
-
-  ### Monitor on which the notification center will be printed. If
-  ### "follow-mouse" is set true, this does nothing.
-  # monitor: 0
-
-  ### If true, the notification center will open on the screen, on which
-  ### the mouse is. Overrides the "monitor" setting.
-  # follow-mouse: false
-
-  ### Notification center closes when the mouse leaves it
-  hide-on-mouse-leave: false
-
-  ### If newFirst is set to true, newest notifications appear on the top
-  ### of the notification center. Else, notifications stack, from top to
-  ### bottom.
-  new-first: true
-
-  ### If true, the transient field in notifications will be ignored,
-  ### thus the notification will be persisted in the notification
-  ### center anyways
-  ignore-transient: false
-
-  ### Custom buttons in notification center
-  buttons:
-    ### Numbers of buttons that can be drawn on a row of the notification
-    ### center.
-    buttons-per-row: 3
-
-    ### Height of buttons in the notification center (in pixels).
-    button-height: 60
-
-    ### Horizontal and vertical margin between each button in the
-    ### notification center (in pixels).
-    button-margin: 2
-
-    ### Button actions and labels. For each button you must specify a
-    ### label and a command.
-    actions:
-      # - label: VPN
-      #   command: "sudo vpnToggle"
-      # - label: Bluetooth
-      #   command: bluetoothToggle
-      # - label: Wifi
-      #   command: wifiToggle
-      # - label: Screensaver
-      #   command: screensaverToggle
-      # - label: Keyboard
-      #   command: keyboardToggle
-      - label: "Pause Notifications"
-        command: "/home/sravan/.scripts/deadd.sh --pause"
-      - label: "Unpause Notifications"
-        command: "/home/sravan/.scripts/deadd.sh --unpause"
-      - label: "Close Notification Center"
-        command: "/home/sravan/.scripts/deadd.sh --toggle-center"
-
-notification:
-
-  ### If true, markup (<u>, <i>, <b>, <a>) will be displayed properly
-  use-markup: true
-
-  ### If true, html entities (&#38; for &, &#37; for %, etc) will be
-  ### parsed properly. This is useful for chromium-based apps, which
-  ### tend to send these in notifications.
-  parse-html-entities: true
-
-  dbus:
-    ### If noti-closed messages are enabled, the sending application
-    ### will know that a notification was closed/timed out. This can
-    ### be an issue for certain applications, that overwrite
-    ### notifications on status updates (e.g. Spotify on each
-    ### song). When one of these applications thinks, the notification
-    ### has been closed/timed out, they will not overwrite existing
-    ### notifications but send new ones. This can lead to redundant
-    ### notifications in the notification center, as the close-message
-    ### is send regardless of the notification being persisted.
-    send-noti-closed: false
-
-  app-icon:
-    ### If set to true: If no icon is passed by the app_icon parameter
-    ### and no application "desktop-entry"-hint is present, deadd will
-    ### try to guess the icon from the application name (if present).
-    guess-icon-from-name: true
-
-    ### The display size of the application icons in the notification
-    ### pop-ups and in the notification center
-    icon-size: 25
-
-  image:
-    ### The maximal display size of images that are part of
-    ### notifications for notification pop-ups and in the notification
-    ### center
-    size: 100
-
-    ### The margin around the top, bottom, left, and right of
-    ### notification images.
-    margin-top: 10
-    margin-bottom: 10
-    margin-left: 10
-    margin-right: 0
-
-  ### Apply modifications to certain notifications:
-  ### Each modification rule needs a "match" and either a "modify" or
-  ### a "script" entry.
-  modifications:
-  ### Match:
-  ### Matches the notifications against these rules. If all of the
-  ### values (of one modification rule) match, the "modify"/"script"
-  ### part is applied.
-  # - match:
-      ### Possible match criteria:
-      # title: "Notification title"
-      # body: "Notification body"
-      # time: "12:44"
-      # app-name: "App name"
-
-    # modify:
-      ### Possible modifications
-      # title: "abc"
-      # body: "abc"
-      # app-name: "abc"
-      # app-icon: "file:///abc.png"
-      ### The timeout has three special values:
-      ### timeout: 0 -> don't time out at all
-      ### timeout: -1 -> use default timeout
-      ### timeout: 1 -> don't show as pop-up
-      ### timeout: >1 -> milliseconds until timeout
-      # timeout: 1
-      # margin-right: 10
-      # margin-top: 10
-      # image: "file:///abc.png"
-      # image-size: 10
-      # transient: true
-      # send-noti-closed: false
-      ### Remove action buttons from notifications
-      # remove-actions: true
-      ### Add a class-name to the notification container, that can be
-      ### used for specific styling of notifications using the
-      ### deadd.css file
-      # class-name: "abc"
-
-  # - match:
-      # app-name: "Chromium"
-
-    ### Instead of modifying a notification directly, a script can be
-    ### run, which will receive the notification as JSON on STDIN. It
-    ### is expected to return JSON/YAML configuration that defines the
-    ### modifications that should be applied. Minimum complete return
-    ### value must be '{"modify": {}, "match": {}}'. Always leave the "match"
-    ### object empty (technical reasons, i.e. I am lazy).
-    # script: "linux-notification-center-parse-chromium"
-  # - match:
-  #     app-name: "Spotify"
-  #   modify:
-  #     image-size: 80
-  #     timeout: 1
-  #     send-noti-closed: true
-  #     class-name: "Spotify"
-  # - match:
-  #     title: Bildschirmhelligkeit
-  #   modify:
-  #     image-size: 60
-
-  popup:
-
-    ### Default timeout used for notifications in milli-seconds.  This can
-    ### be overwritten with the "-t" option (or "--expire-time") of the
-    ### notify-send command.
-    default-timeout: 10000
-
-    # Margin above/right/between notifications (in pixels). This can
-    # be used to avoid overlap between notifications and a bar such as
-    # polybar or i3blocks.
-    margin-top: 35
-    margin-right: 10
-    margin-between: 10
-
-    ### Monitor on which the notifications will be
-    ### printed. If "follow-mouse" is set true, this does nothing.
-    # monitor: 0
-
-    ### If true, the notifications will open on the
-    ### screen, on which the mouse is. Overrides the "monitor" setting.
-    # follow-mouse: false
-
-    click-behavior:
-
-      ### The mouse button for dismissing a popup. Must be either "mouse1",
-      ### "mouse2", "mouse3", "mouse4", or "mouse5"
-      dismiss: mouse1
-
-      ### The mouse button for opening a popup with the default action.
-      ### Must be either "mouse1", "mouse2", "mouse3", "mouse4", or "mouse5"
-      default-action: mouse3

deadd/.scripts/deadd.sh

@@ -1,102 +0,0 @@
-#!/usr/bin/env bash
-help_menu() {
-    echo "Script to interact with deadd. Use only one argument at a time."
-    echo "  - Toggle On/Off:               deadd.sh OR deadd.sh --toggle OR deadd.sh -t"
-    echo "  - Turn On:                     deadd.sh --on"
-    echo "  - Turn Off:                    deadd.sh --off"
-    echo "  - Toggle Notification Center:  deadd.sh --toggle-center"
-    echo "  - Pause Popup Notifications:   deadd.sh --pause"
-    echo "  - Unpause Popup Notifications: deadd.sh --unpause"
-    echo "  - Rofi Menu:                   deadd.sh --rofi"
-    echo "  - Help:                        deadd.sh --help OR deadd.sh -h"
-}
-
-is_running() {
-    if pgrep -x deadd-notificat >/dev/null; then
-        echo 1
-    else
-        echo 0
-    fi
-}
-
-rofi_menu() {
-    declare -a options=(
-        "⏼ Toggle - toggle"
-        "󰂞 Turn On - on"
-        "󰂛 Turn Off - off"
-        "󱨩 Toggle Notification Center - toggle-center"
-        " Pause Popup Notifications - pause"
-        " Unpause Popup Notifications - unpause"
-        "󰌍 Back - back"
-        "󰗼 Quit - quit"
-    )
-
-    choice=$(printf '%s\n' "${options[@]}" | rofi -dmenu -i)
-    option=$(printf '%s\n' "${choice}" | awk '{print $NF}')
-
-    if [[ "$option" == "quit" ]]; then
-        pkill rofi
-    elif [[ "$option" != "back" ]]; then
-        main "--$option" && main "--rofi"
-    fi
-}
-
-main() {
-    if [ $# -eq 0 ]; then
-        # No arguments
-        help_menu
-    else
-        case $1 in
-        --help | -h)
-            help_menu
-            ;;
-        --toggle)
-            if [ $(is_running) -eq '1' ]; then
-                main --off
-            else
-                main --on
-            fi
-            ;;
-        --on)
-            if [ $(is_running) -eq '1' ]; then
-                pkill deadd-notificat
-            fi
-
-            /usr/bin/notify-send.py a --hint \
-                boolean:deadd-notification-center:true \
-                string:type:reloadStyle
-
-            notify-send "Turning Deadd ON" &
-            ;;
-        --off)
-            notify-send "Turning Deadd OFF" &
-
-            if [ $(is_running) -eq '1' ]; then
-                pkill deadd-notificat
-            fi
-            ;;
-        --toggle-center)
-            kill -s USR1 $(pidof deadd-notification-center)
-            ;;
-        --pause)
-            notify-send "Pausing Notifications" &
-
-            /usr/bin/notify-send.py a --hint \
-                boolean:deadd-notification-center:true \
-                string:type:pausePopups > /dev/null 2>&1
-            ;;
-        --unpause)
-            /usr/bin/notify-send.py a --hint \
-                boolean:deadd-notification-center:true \
-                string:type:unpausePopups > /dev/null 2>&1
-
-            notify-send "Unpausing Notifications" &
-            ;;
-        --rofi)
-            rofi_menu
-            ;;
-        esac
-    fi
-}
-
-main $@

dunst/.config/dunst/dunstrc

@@ -1,207 +0,0 @@
-[global]
-    monitor = 0
-    follow = keyboard
-    width = 400
-    height = (0, 120)
-    offset = (10, 10)
-    origin = top-right
-    notification_limit = 50
-    indicate_hidden = true
-    padding = 10
-    icon_corner_radius = 0
-    gap_size = 2
-    transparency = 15
-    frame_width = 2
-    sort = true
-    idle_threshold = 120
-    font = NotoSans Nerd Font 12
-    line_height = 0
-    markup = full
-    format = "<b>%s</b> | <i>%a</i> %p\n%b"
-    alignment = center
-    vertical_alignment = center
-    show_age_threshold = 60
-    word_wrap = true
-    ellipsize = middle
-    stack_duplicates = true
-    hide_duplicate_count = false
-    show_indicators = yes
-    icon_position = left
-    min_icon_size = 0
-    max_icon_size = 100
-    icon_path = /usr/share/icons/Papirus-Dark/16x16/status/:/usr/share/icons/Papirus-Dark/16x16/devices/
-    sticky_history = yes
-    history_length = 50
-    dmenu = /usr/bin/rofi -dmenu -i -p dunst:
-    browser = /usr/bin/vivaldi-stable
-    always_run_script = true
-    title = Dunst
-    class = Dunst
-    corner_radius = 10
-    ignore_dbusclose = false
-    force_xinerama = false
-    mouse_left_click = context, close_current
-    mouse_middle_click = close_all
-    mouse_right_click = close_current
-
-# Experimental features that may or may not work correctly. Do not expect them
-# to have a consistent behaviour across releases.
-[experimental]
-    per_monitor_dpi = false
-
-[shortcuts]
-
-    # Shortcuts are specified as [modifier+][modifier+]...key
-    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
-    # "mod3" and "mod4" (windows-key).
-    # Xev might be helpful to find names for keys.
-
-    # Close notification.
-    # close = ctrl+space
-
-    # Close all notifications.
-    # close_all = ctrl+shift+space
-
-    # Redisplay last message(s).
-    # On the US keyboard layout "grave" is normally above TAB and left
-    # of "1". Make sure this key actually exists on your keyboard layout,
-    # e.g. check output of 'xmodmap -pke'
-    # history = ctrl+grave
-
-    # Context menu.
-    # context = ctrl+shift+period
-
-[urgency_low]
-    frame_color = "#5AF78E"
-    background = "#282A36"
-    foreground = "#F8F8F2"
-    timeout = 10
-
-[urgency_normal]
-    frame_color = "#5AF78E"
-    background = "#282A36"
-    foreground = "#F8F8F2"
-    timeout = 10
-
-[urgency_critical]
-    frame_color = "#50FA7B"
-    background = "#FF5555"
-    foreground = "#F8F8F2"
-    timeout = 0
-
-# Every section that isn't one of the above is interpreted as a rules to
-# override settings for certain messages.
-#
-# Messages can be matched by
-#    appname (discouraged, see desktop_entry)
-#    body
-#    category
-#    desktop_entry
-#    icon
-#    match_transient
-#    msg_urgency
-#    stack_tag
-#    summary
-#
-# and you can override the
-#    background
-#    foreground
-#    format
-#    frame_color
-#    fullscreen
-#    new_icon
-#    set_stack_tag
-#    set_transient
-#    timeout
-#    urgency
-#
-# Shell-like globbing will get expanded.
-#
-# Instead of the appname filter, it's recommended to use the desktop_entry filter.
-# GLib based applications export their desktop-entry name. In comparison to the appname,
-# the desktop-entry won't get localized.
-#
-# SCRIPTING
-# You can specify a script that gets run when the rule matches by
-# setting the "script" option.
-# The script will be called as follows:
-#   script appname summary body icon urgency
-# where urgency can be "LOW", "NORMAL" or "CRITICAL".
-#
-# NOTE: if you don't want a notification to be displayed, set the format
-# to "".
-# NOTE: It might be helpful to run dunst -print in a terminal in order
-# to find fitting options for rules.
-
-# Disable the transient hint so that idle_threshold cannot be bypassed from the
-# client
-#[transient_disable]
-#    match_transient = yes
-#    set_transient = no
-#
-# Make the handling of transient notifications more strict by making them not
-# be placed in history.
-#[transient_history_ignore]
-#    match_transient = yes
-#    history_ignore = yes
-
-# fullscreen values
-# show: show the notifications, regardless if there is a fullscreen window opened
-# delay: displays the new notification, if there is no fullscreen window active
-#        If the notification is already drawn, it won't get undrawn.
-# pushback: same as delay, but when switching into fullscreen, the notification will get
-#           withdrawn from screen again and will get delayed like a new notification
-#[fullscreen_delay_everything]
-#    fullscreen = delay
-#[fullscreen_show_critical]
-#    msg_urgency = critical
-#    fullscreen = show
-
-#[espeak]
-#    summary = "*"
-#    script = dunst_espeak.sh
-
-#[script-test]
-#    summary = "*script*"
-#    script = dunst_test.sh
-
-#[ignore]
-#    # This notification will not be displayed
-#    summary = "foobar"
-#    format = ""
-
-#[history-ignore]
-#    # This notification will not be saved in history
-#    summary = "foobar"
-#    history_ignore = yes
-
-#[skip-display]
-#    # This notification will not be displayed, but will be included in the history
-#    summary = "foobar"
-#    skip_display = yes
-
-#[signed_on]
-#    appname = Pidgin
-#    summary = "*signed on*"
-#    urgency = low
-#
-#[signed_off]
-#    appname = Pidgin
-#    summary = *signed off*
-#    urgency = low
-#
-#[says]
-#    appname = Pidgin
-#    summary = *says*
-#    urgency = critical
-#
-#[twitter]
-#    appname = Pidgin
-#    summary = *twitter.com*
-#    urgency = normal
-#
-#[stack-volumes]
-#    appname = "some_volume_notifiers"
-#    set_stack_tag = "volume"
-#
-# vim: ft=cfg

dunst/.scripts/dunst.sh

@@ -1,118 +0,0 @@
-#!/usr/bin/env bash
-help_menu() {
-    echo "Script to interact with dunst. Use only one argument at a time."
-    echo "  - Toggle On/Off:           dunst.sh OR dunst.sh --toggle OR dunst.sh -t"
-    echo "  - Turn On:                 dunst.sh --on"
-    echo "  - Turn Off:                dunst.sh --off"
-    echo "  - Context Menu:            dunst.sh --context"
-    echo "  - Close Notification:      dunst.sh --close"
-    echo "  - Close All Notifications: dunst.sh --close-all"
-    echo "  - History Pop:             dunst.sh --history"
-    echo "  - History Clear:           dunst.sh --history-clear"
-    echo "  - Toggle Do Not Disturb:   dunst.sh --dnd"
-    echo "  - Pause Notifications:     dunst.sh --pause"
-    echo "  - Unpause Notifications:   dunst.sh --unpause"
-    echo "  - Rofi Menu:               dunst.sh --rofi"
-    echo "  - Help:                    dunst.sh --help OR dunst.sh -h"
-}
-
-is_running() {
-    if pgrep -x dunst >/dev/null; then
-        echo 1
-    else
-        echo 0
-    fi
-}
-
-rofi_menu() {
-    declare -a options=(
-        "⏼ Toggle - toggle"
-        "󰂞 Turn On - on"
-        "󰂛 Turn Off - off"
-        "󱨩 Open Actions - context"
-        " Close Notification - close"
-        " Close All Notifications - close-all"
-        " View History - history"
-        "󰎟 Clear History - history-clear"
-        "󰂠 Toggle Do Not Disturb - dnd"
-        " Pause Popup Notifications - pause"
-        " Unpause Popup Notifications - unpause"
-        "󰌍 Back - back"
-        "󰗼 Quit - quit"
-    )
-
-    choice=$(printf '%s\n' "${options[@]}" | rofi -dmenu -i)
-    option=$(printf '%s\n' "${choice}" | awk '{print $NF}')
-
-    if [[ "$option" == "quit" ]]; then
-        pkill rofi
-    elif [[ "$option" != "back" ]]; then
-        main "--$option" && main "--rofi"
-    fi
-}
-
-main() {
-    if [ $# -eq 0 ]; then
-        # No arguments
-        help_menu
-    else
-        case $1 in
-        --help | -h)
-            help_menu
-            ;;
-        --toggle)
-            if [ $(is_running) -eq '1' ]; then
-                main --off
-            else
-                main --on
-            fi
-            ;;
-        --on)
-            if [ $(is_running) -eq '1' ]; then
-                pkill dunst
-            fi
-
-            # Start Dunst
-            /usr/bin/dunst -config ~/.config/dunst/dunstrc &
-
-            notify-send "Turning Dunst ON" &
-            ;;
-        --off)
-            notify-send "Turning Dunst OFF" &
-
-            if [ $(is_running) -eq '1' ]; then
-                pkill dunst
-            fi
-            ;;
-        --context)
-            dunstctl context
-            ;;
-        --close)
-            dunstctl close
-            ;;
-        --close-all)
-            dunstctl close-all
-            ;;
-        --history)
-            dunstctl history-pop
-            ;;
-        --history-clear)
-            dunstctl history-clear
-            ;;
-        --dnd)
-            dunstctl set-paused toggle
-            ;;
-        --pause)
-            dunstctl set-paused true
-            ;;
-        --unpause)
-            dunstctl set-paused false
-            ;;
-        --rofi)
-            rofi_menu
-            ;;
-        esac
-    fi
-}
-
-main $@

dwl/.config/dwl

@@ -1 +0,0 @@
-Subproject commit 455eedaa60c8458cd48e346697a428db3118cc65

dwl/.scripts/control-center.sh

@@ -1,76 +0,0 @@
-#!/usr/bin/env bash
-help_menu() {
-    echo "Main script to launch sub-menu scripts. Use only one argument at a time."
-    # echo "  - Play / Pause:  playerctl.sh --play-pause"
-    # echo "  - Next:          playerctl.sh --next"
-    # echo "  - Previous:      playerctl.sh --prev"
-    # echo "  - Change Player: playerctl.sh --change"
-    # echo "  - Rofi Menu:     playerctl.sh --rofi"
-    # echo "  - Help:          playerctl.sh --help OR playerctl.sh -h"
-}
-
-rofi_menu() {
-    declare -a options=(
-        "󰍹 Display - brightness"
-        "󰂚 Notifications - dunst"
-        " Media - playerctl"
-        "󰕾 Volume - pactl"
-        "󰁯 Backup - backup"
-        " Hardware - cpu-gpu"
-        " Gaming - gaming"
-        " Power Menu - session"
-        "󰌍 Back - back"
-        "󰗼 Quit - quit"
-    )
-
-    choice=$(printf '%s\n' "${options[@]}" | rofi -dmenu -i)
-    option=$(printf '%s\n' "${choice}" | awk '{print $NF}')
-
-    if [[ "$option" == "quit" ]]; then
-        pkill rofi
-    elif [[ "$option" != "back" ]]; then
-        main "--$option" && main "--rofi"
-    fi
-}
-
-main() {
-    if [ $# -eq 0 ]; then
-        # No arguments
-        help_menu
-    else
-        case $1 in
-        --help | -h)
-            help_menu
-            ;;
-        --brightness)
-            $HOME/.scripts/brightness.sh --rofi
-            ;;
-        --dunst)
-            $HOME/.scripts/dunst.sh --rofi
-            ;;
-        --playerctl)
-            $HOME/.scripts/playerctl.sh --rofi
-            ;;
-        --pactl)
-            $HOME/.scripts/pactl.sh --rofi
-            ;;
-        --backup)
-            $HOME/.scripts/backup.sh --rofi
-            ;;
-        --cpu-gpu)
-            $HOME/.scripts/cpu-gpu.sh --rofi
-            ;;
-        --gaming)
-            $HOME/.scripts/gaming.sh --rofi
-            ;;
-        --session)
-            $HOME/.scripts/session.sh --rofi
-            ;;
-        --rofi)
-            rofi_menu
-            ;;
-        esac
-    fi
-}
-
-main $@

dwl/.scripts/session.sh

@@ -1,69 +0,0 @@
-#!/usr/bin/env bash
-help_menu() {
-    echo "Script to interact with desktop session. Use only one argument at a time."
-    # echo "  - Play / Pause:  playerctl.sh --play-pause"
-    # echo "  - Next:          playerctl.sh --next"
-    # echo "  - Previous:      playerctl.sh --prev"
-    # echo "  - Change Player: playerctl.sh --change"
-    # echo "  - Rofi Menu:     playerctl.sh --rofi"
-    # echo "  - Help:          playerctl.sh --help OR playerctl.sh -h"
-}
-
-rofi_menu() {
-    declare -a options=(
-        " Logout - logout"
-        " Lock - lock"
-        "⏾ Sleep - sleep"
-        " Reboot - reboot"
-        " Shutdown - shutdown"
-        "󰌍 Back - back"
-        "󰗼 Quit - quit"
-    )
-
-    choice=$(printf '%s\n' "${options[@]}" | rofi -dmenu -i)
-    option=$(printf '%s\n' "${choice}" | awk '{print $NF}')
-
-    if [[ "$option" == "quit" ]]; then
-        pkill rofi
-    elif [[ "$option" != "back" ]]; then
-        main "--$option" && pkill rofi
-    fi
-}
-
-main() {
-    if [ $# -eq 0 ]; then
-        # No arguments
-        help_menu
-    else
-        case $1 in
-        --help | -h)
-            help_menu
-            ;;
-        --logout)
-            notify-send "Session Control" "Logging Out of dwl" &
-            pkill dwl
-            ;;
-        --lock)
-            notify-send "Session Control" "Locking Session" &
-            loginctl lock-session
-            ;;
-        --sleep)
-            notify-send "Session Control" "Going to Sleep" &
-            systemctl suspend
-            ;;
-        --reboot)
-            notify-send "Session Control" "Rebooting System" &
-            systemctl reboot
-            ;;
-        --shutdown)
-            notify-send "Session Control" "Shutting Down System" &
-            systemctl poweroff
-            ;;
-        --rofi)
-            rofi_menu
-            ;;
-        esac
-    fi
-}
-
-main $@

dwl/.scripts/wayland-startup.sh

@@ -1,119 +0,0 @@
-#!/usr/bin/env bash
-declare -a startup_array=(\
-    # Status Bar
-    "$HOME/.config/dwl/waybar/launch.sh" \                     # Waybar (dwl configuration)
-    # Background Processes
-    "/usr/bin/swayidle" \                                      # Swayidle Idle Manager
-    "/usr/libexec/polkit-gnome-authentication-agent-1" \       # GNOME Polkit Authentication Agent
-    "/usr/bin/kdeconnectd --replace" \                         # KDE Connect Daemon
-    "$HOME/.scripts/dunst.sh --on" \                           # Dunst Notification Daemon
-    "/usr/bin/wl-paste --type text --watch cliphist store" \   # Clipboard for Text
-    "/usr/bin/wl-paste --type image --watch cliphist store" \  # Clipboard for Images
-    "/usr/bin/swhks" \                                         # Simple Wayland HotKey Server
-    "sudo /usr/bin/swhkd" \                                    # Simple Wayland HotKey Daemon
-    # Display / Compositor Setup
-    "/usr/bin/shikane" \       # Display Setup
-    "$HOME/.azotebg" \         # Restore wallpaper
-    "/usr/bin/gammastep -x" \  # Reset gammastep night light
-    # Tray Applications
-    "/usr/bin/blueman-applet" \        # Bluetooth Manager Applet
-    "/usr/bin/nm-applet" \             # Network Manager Applet
-    "/usr/bin/kdeconnect-indicator" \  # KDE Connect Indicator
-    "/usr/bin/udiskie -a -n -s" \      # Udiskie
-    # GUI Applications
-    "/usr/bin/nextcloud" \      # NextCloud Client
-    "/usr/bin/syncthing-gtk" \  # Syncthing GUI
-    "/usr/bin/openrgb" \        # OpenRGB
-)
-
-declare -a kill_startup_array=(\
-    # Status Bar
-    "pkill waybar" \
-    # Background Processes
-    "pkill swayidle" \
-    "pkill polkit-gnome-au" \
-    "pkill kdeconnectd" \
-    "$HOME/.scripts/dunst.sh --off" \
-    "pkill wl-paste" \
-    "pkill swhks" \
-    "pkill swhkd" \
-    # Display / Compositor Setup
-    "pkill shikane" \
-    # Tray Applications
-    "pkill blueman-applet" \
-    "pkill nm-applet" \
-    "pkill kdeconnect-indi" \
-    "pkill udiskie" \
-    # GUI Applications
-    "pkill nextcloud" \
-    "pkill syncthing-gtk" \
-    "pkill openrgb" \
-)
-
-help_menu() {
-    echo "Main script to launch and kill startup processes. Use only one argument at a time."
-    # echo "  - Play / Pause:  playerctl.sh --play-pause"
-    # echo "  - Next:          playerctl.sh --next"
-    # echo "  - Previous:      playerctl.sh --prev"
-    # echo "  - Change Player: playerctl.sh --change"
-    # echo "  - Rofi Menu:     playerctl.sh --rofi"
-    # echo "  - Help:          playerctl.sh --help OR playerctl.sh -h"
-}
-
-rofi_menu() {
-    declare -a options=(
-        " Launch Startup Processes - startup"
-        " Kill Startup Processes - kill-startup"
-        "󰌍 Back - back"
-        "󰗼 Quit - quit"
-    )
-
-    choice=$(printf '%s\n' "${options[@]}" | rofi -dmenu -i)
-    option=$(printf '%s\n' "${choice}" | awk '{print $NF}')
-
-    if [[ "$option" == "quit" ]]; then
-        pkill rofi
-    elif [[ "$option" != "back" ]]; then
-        main "--$option" && main "--rofi"
-    fi
-}
-
-main() {
-    if [ $# -eq 0 ]; then
-        # No arguments
-        help_menu
-    else
-        case $1 in
-        --help | -h)
-            help_menu
-            ;;
-        --startup)
-            for i in "${startup_array[@]}"
-            do
-                if ! command -v $i > /dev/null
-                then
-                    do_nothing() { :; }
-                else
-                    $i &
-                fi
-            done
-            ;;
-        --kill-startup)
-            for i in "${kill_startup_array[@]}"
-            do
-                if ! command -v $i > /dev/null
-                then
-                    do_nothing() { :; }
-                else
-                    $i &
-                fi
-            done
-            ;;
-        --rofi)
-            rofi_menu
-            ;;
-        esac
-    fi
-}
-
-main $@

dwl/.winitrc

@@ -1,15 +0,0 @@
-#!/usr/bin/env bash
-export TERM=xterm-256color            # Sets the terminal type
-export SHELL=/bin/fish                # Preferred shell
-export EDITOR="emacs"                 # Default editor
-export GIT_EDITOR="emacs"             # Default git editor
-export BROWSER=vivaldi-stable         # Web Browser
-export XDG_CONFIG_HOME=$HOME/.config  # Set Config directory
-export QT_QPA_PLATFORMTHEME=qt6ct     # QGtkStyle
-export _JAVA_AWT_WM_NONREPARENTING=1  # Java fix for Window Managers
-export XDG_CURRENT_DESKTOP=wlroots    # Set XDG current desktop
-
-$HOME/.scripts/wayland-startup.sh --kill-startup
-
-dbus-update-activation-environment --systemd --all
-exec dbus-run-session -- dwl -s '$HOME/.scripts/wayland-startup.sh --startup'

dwm/.config/dwm-flexipatch

@@ -1 +0,0 @@
-Subproject commit d8b91c7e8ba3a3564a19094f52465426e992863c

dwm/.scripts/x11-startup.sh

@@ -1,142 +0,0 @@
-#!/usr/bin/env bash
-declare -a startup_array=(\
-    "/usr/bin/greenclip daemon" \                         # Greenclip Clipboard Manager
-    "/usr/libexec/polkit-gnome-authentication-agent-1" \  # GNOME Polkit Authentication Agent
-    "/usr/bin/xss-lock -l -- betterlockscreen --lock" \   # Session Lock Utility
-    "/usr/lib/kdeconnectd --replace" \                    # KDE Connect Daemon
-    "/usr/bin/unclutter" \                                # Hide Mouse Cursor
-    "/usr/bin/easyeffects --gapplication-service" \       # Easy Effects PipeWire Plugins
-)
-
-declare -a kill_startup_array=(\
-    "pkill greenclip" \    # Greenclip Clipboard Manager
-    "pkill polkit" \       # GNOME Polkit Authentication Agent
-    "pkill xss-lock" \     # Session Lock Utility
-    "pkill kdeconnectd" \  # KDE Connect Daemon
-    "pkill unclutter" \    # Hide Mouse Cursor
-    "pkill easyeffects" \  # Easy Effects PipeWire Plugins
-)
-
-declare -a delay_array=(\
-    "/usr/bin/blueman-applet" \                # Blueman Bluetooth Manager
-    "/usr/bin/nm-applet" \                     # Network Manager Applet
-    "/usr/bin/kdeconnect-indicator" \          # KDE Connect Indicator
-    "/usr/bin/flameshot" \                     # Flameshot Screenshot Tool
-    "/usr/bin/xfce4-power-manager" \           # XFCE4 Power Manager
-    "/usr/bin/udiskie -a -n -s" \              # Udiskie
-    "/usr/bin/openrgb" \                       # OpenRGB
-    "/usr/bin/syncthing-gtk" \                 # Syncthing GTK
-    "/usr/bin/nextcloud" \                     # NextCloud Client
-    "/usr/bin/nyrna" \                         # Nyrna
-    "bash $HOME/.scripts/dunst.sh --on" \      # Dunst Notification Daemon
-    "bash $HOME/.scripts/picom.sh --on" \      # Picom Compositor
-    "/usr/bin/autorandr --change --force" \    # Auto restore screen layout
-    "/usr/bin/numlockx on" \                   # Enable numlock
-)
-
-declare -a kill_delay_array=(\
-    "pkill blueman-applet" \                    # Blueman Bluetooth Manager
-    "pkill nm-applet" \                         # Network Manager Applet
-    "pkill kdeconnect-indicator" \              # KDE Connect Indicator
-    "pkill flameshot" \                         # Flameshot Screenshot Tool
-    "pkill xfce4-power-manager" \               # XFCE4 Power Manager
-    "pkill udiskie" \                           # Udiskie
-    "pkill openrgb" \                           # OpenRGB
-    "pkill syncthing-gtk" \                     # Syncthing GTK
-    "pkill nextcloud" \                         # NextCloud Client
-    "pkill nyrna" \                             # Nyrna
-    "bash $HOME/.scripts/dunst.sh --off" \      # Dunst Notification Daemon
-    "bash $HOME/.scripts/picom.sh --off" \      # Picom Compositor
-)
-
-help_menu() {
-    echo "Main script to launch and kill startup processes. Use only one argument at a time."
-    # echo "  - Play / Pause:  playerctl.sh --play-pause"
-    # echo "  - Next:          playerctl.sh --next"
-    # echo "  - Previous:      playerctl.sh --prev"
-    # echo "  - Change Player: playerctl.sh --change"
-    # echo "  - Rofi Menu:     playerctl.sh --rofi"
-    # echo "  - Help:          playerctl.sh --help OR playerctl.sh -h"
-}
-
-rofi_menu() {
-    declare -a options=(
-        " Launch Startup Processes - startup"
-        "󰔟 Launch Delayed Processes - delay"
-        " Kill Startup Processes - kill-startup"
-        " Kill Delayed Processes - kill-delay"
-        "󰌍 Back - back"
-        "󰗼 Quit - quit"
-    )
-
-    choice=$(printf '%s\n' "${options[@]}" | rofi -dmenu -i)
-    option=$(printf '%s\n' "${choice}" | awk '{print $NF}')
-
-    if [[ "$option" == "quit" ]]; then
-        pkill rofi
-    elif [[ "$option" != "back" ]]; then
-        main "--$option" && main "--rofi"
-    fi
-}
-
-main() {
-    if [ $# -eq 0 ]; then
-        # No arguments
-        help_menu
-    else
-        case $1 in
-        --help | -h)
-            help_menu
-            ;;
-        --startup)
-            for i in "${startup_array[@]}"
-            do
-                if ! command -v $i > /dev/null
-                then
-                    do_nothing() { :; }
-                else
-                    $i &
-                fi
-            done
-            ;;
-        --delay)
-            for i in "${delay_array[@]}"
-            do
-                if ! command -v $i > /dev/null
-                then
-                    do_nothing() { :; }
-                else
-                    $i &
-                fi
-            done
-            ;;
-        --kill-startup)
-            for i in "${kill_startup_array[@]}"
-            do
-                if ! command -v $i > /dev/null
-                then
-                    do_nothing() { :; }
-                else
-                    $i &
-                fi
-            done
-            ;;
-        --kill-delay)
-            for i in "${kill_delay_array[@]}"
-            do
-                if ! command -v $i > /dev/null
-                then
-                    do_nothing() { :; }
-                else
-                    $i &
-                fi
-            done
-            ;;
-        --rofi)
-            rofi_menu
-            ;;
-        esac
-    fi
-}
-
-main $@

dwm/.xinitrc

@@ -1,22 +0,0 @@
-#!/usr/bin/env bash
-export TERM=xterm-256color            # Sets the terminal type
-export SHELL=/bin/fish                # Preferred shell
-export EDITOR="emacs"                 # Default editor
-export GIT_EDITOR="emacs"             # Default git editor
-export BROWSER=vivaldi-stable         # Web Browser
-export XDG_CONFIG_HOME=$HOME/.config  # Set Config directory
-export QT_QPA_PLATFORMTHEME=qt6ct     # QGtkStyle
-export _JAVA_AWT_WM_NONREPARENTING=1  # Java fix for Window Managers
-
-xrdb ~/.Xresources
-
-# Startup Applications
-$HOME/.scripts/x11-startup.sh --kill-startup &&
-    $HOME/.scripts/x11-startup.sh --startup
-
-# Delayed Startup Applications
-(sleep 5 &&
-    $HOME/.scripts/x11-startup.sh --kill-delay &&
-    $HOME/.scripts/x11-startup.sh --delay) &
-
-exec dwm

emacs/.config/doom-emacs

@@ -1 +0,0 @@
-Subproject commit 56ce6cc284e8f4dd0cb0704dde6694a1b8e500ed

emacs/.config/doom-emacs-config

@@ -1 +0,0 @@
-Subproject commit dae83ddfea2d8e3e4481c40de88a72eebbc68e3d

emacs/.config/emacs

@@ -1 +0,0 @@
-Subproject commit c2d700b784c793cc82131ef86323801b8d6e67bb