sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/volteer/var/voxel: Add Raydium touchscreen support

Browse Source 
Update gpio GPP_E7 and enable the Raydium TS support

BUG=b:157402209,b:162632701,b:162636271
BRANCH=master
TEST= 1. emerge-volteer coreboot chromeos-bootimage
      2. boot up on voxel DUT and make sure the raydium TS can work.

Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I377aded4982ece71f4dabb58f307f68c713edcd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
This commit is contained in:
David Wu
2020-07-30 13:18:05 +08:00
committed by Tim Wawrzynczak
parent 92887375c5
commit 053b972a2a
2 changed files with 15 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
src/mainboard/google/volteer/variants/voxel/gpio.c
View File

@@ -117,7 +117,7 @@ static const struct pad_config override_gpio_table[] = {
/* E3 : CPU_GP0 ==> USI_REPORT_EN */
PAD_CFG_GPO(GPP_E3, 1, DEEP),
/* E7 : CPU_GP1 ==> USI_INT */
PAD_CFG_GPI(GPP_E7, NONE, DEEP),
PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST, LEVEL, NONE),
/* E8 : SPI1_CS1# ==> SLP_S0IX */
PAD_CFG_GPO(GPP_E8, 0, DEEP),
/* E10 : SPI1_CS# ==> NC(TP94508) */

14
src/mainboard/google/volteer/variants/voxel/overridetree.cb
View File

@@ -63,6 +63,20 @@ chip soc/intel/tigerlake
register "hid_desc_reg_offset" = "0x01"
device i2c 10 on end
end
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
register "reset_delay_ms" = "1"
register "reset_off_delay_ms" = "2"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
register "enable_delay_ms" = "10"
register "enable_off_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 39 on end
end
end # I2C1 0xA0E9
device pci 15.2 on
chip drivers/i2c/sx9310