mainboard/google/reef: add snappy variant
Create the initial Snappy variant which refers to the Reef device. Snappy, an Apollolake-platform, is deviated from reference board Reef. BRANCH=master BUG=None TEST=Built & booted Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I6f32c0b1a154edbd8c4822acdbdbdbeb4a0098e6 Reviewed-on: https://review.coreboot.org/17043 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This commit is contained in:
Wisley Chen
Martin Roth
@@ -51,16 +51,19 @@ config VARIANT_DIR
|
||||
string
|
||||
default "reef" if BOARD_GOOGLE_REEF
|
||||
default "pyro" if BOARD_GOOGLE_PYRO
|
||||
default "snappy" if BOARD_GOOGLE_SNAPPY
|
||||
|
||||
config DEVICETREE
|
||||
string
|
||||
default "variants/pyro/devicetree.cb" if BOARD_GOOGLE_PYRO
|
||||
default "variants/snappy/devicetree.cb" if BOARD_GOOGLE_SNAPPY
|
||||
default "variants/baseboard/devicetree.cb"
|
||||
|
||||
config MAINBOARD_PART_NUMBER
|
||||
string
|
||||
default "Reef" if BOARD_GOOGLE_REEF
|
||||
default "Pyro" if BOARD_GOOGLE_PYRO
|
||||
default "Snappy" if BOARD_GOOGLE_SNAPPY
|
||||
|
||||
config MAINBOARD_FAMILY
|
||||
string
|
||||
@@ -71,6 +74,7 @@ config GBB_HWID
|
||||
depends on CHROMEOS
|
||||
default "REEF TEST 3240" if BOARD_GOOGLE_REEF
|
||||
default "PYRO TEST 0290" if BOARD_GOOGLE_PYRO
|
||||
default "SNAPPY TEST 1088" if BOARD_GOOGLE_SNAPPY
|
||||
|
||||
config MAX_CPUS
|
||||
int
|
||||
|
||||
@@ -7,3 +7,8 @@ config BOARD_GOOGLE_PYRO
|
||||
bool "Pyro"
|
||||
select BOARD_GOOGLE_BASEBOARD_REEF
|
||||
select BASEBOARD_REEF_LAPTOP
|
||||
|
||||
config BOARD_GOOGLE_SNAPPY
|
||||
bool "Snappy"
|
||||
select BOARD_GOOGLE_BASEBOARD_REEF
|
||||
select BASEBOARD_REEF_LAPTOP
|
||||
|
||||
173
src/mainboard/google/reef/variants/snappy/devicetree.cb
Normal file
173
src/mainboard/google/reef/variants/snappy/devicetree.cb
Normal file
@@ -0,0 +1,173 @@
|
||||
chip soc/intel/apollolake
|
||||
|
||||
device cpu_cluster 0 on
|
||||
device lapic 0 on end
|
||||
end
|
||||
|
||||
register "pcie_rp0_clkreq_pin" = "0" # wifi/bt
|
||||
# Disable unused clkreq of PCIe root ports
|
||||
register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED"
|
||||
register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED"
|
||||
|
||||
# GPIO for PERST_0
|
||||
# If the Board has PERST_0 signal, assign the GPIO
|
||||
# If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
|
||||
register "prt0_gpio" = "GPIO_PRT0_UDEF"
|
||||
|
||||
# EMMC TX DATA Delay 1
|
||||
# Refer to EDS-Vol2-22.3.
|
||||
# [14:8] steps of delay for HS400, each 125ps.
|
||||
# [6:0] steps of delay for SDR104/HS200, each 125ps.
|
||||
register "emmc_tx_data_cntl1" = "0x0C16"
|
||||
|
||||
# EMMC TX DATA Delay 2
|
||||
# Refer to EDS-Vol2-22.3.
|
||||
# [30:24] steps of delay for SDR50, each 125ps.
|
||||
# [22:16] steps of delay for DDR50, each 125ps.
|
||||
# [14:8] steps of delay for SDR25/HS50, each 125ps.
|
||||
# [6:0] steps of delay for SDR12, each 125ps.
|
||||
register "emmc_tx_data_cntl2" = "0x28162828"
|
||||
|
||||
# EMMC RX CMD/DATA Delay 1
|
||||
# Refer to EDS-Vol2-22.3.
|
||||
# [30:24] steps of delay for SDR50, each 125ps.
|
||||
# [22:16] steps of delay for DDR50, each 125ps.
|
||||
# [14:8] steps of delay for SDR25/HS50, each 125ps.
|
||||
# [6:0] steps of delay for SDR12, each 125ps.
|
||||
register "emmc_rx_cmd_data_cntl1" = "0x00181717"
|
||||
|
||||
# EMMC RX CMD/DATA Delay 2
|
||||
# Refer to EDS-Vol2-22.3.
|
||||
# [17:16] stands for Rx Clock before Output Buffer
|
||||
# [14:8] steps of delay for Auto Tuning Mode, each 125ps.
|
||||
# [6:0] steps of delay for HS200, each 125ps.
|
||||
register "emmc_rx_cmd_data_cntl2" = "0x10008"
|
||||
|
||||
# Enable DPTF
|
||||
register "dptf_enable" = "1"
|
||||
|
||||
# Enable Audio Clock and Power gating
|
||||
register "hdaudio_clk_gate_enable" = "1"
|
||||
register "hdaudio_pwr_gate_enable" = "1"
|
||||
register "hdaudio_bios_config_lockdown" = "1"
|
||||
|
||||
# Enable lpss s0ix
|
||||
register "lpss_s0ix_enable" = "1"
|
||||
|
||||
# GPE configuration
|
||||
# Note that GPE events called out in ASL code rely on this
|
||||
# route, i.e., if this route changes then the affected GPE
|
||||
# offset bits also need to be changed. This sets the PMC register
|
||||
# GPE_CFG fields.
|
||||
register "gpe0_dw1" = "PMC_GPE_N_31_0"
|
||||
register "gpe0_dw2" = "PMC_GPE_N_63_32"
|
||||
register "gpe0_dw3" = "PMC_GPE_SW_31_0"
|
||||
|
||||
# Enable I2C2 bus early for TPM access
|
||||
register "i2c[2].early_init" = "1"
|
||||
|
||||
# Minimum SLP S3 assertion width 28ms.
|
||||
register "slp_s3_assertion_width_usecs" = "28000"
|
||||
|
||||
device domain 0 on
|
||||
device pci 00.0 on end # - Host Bridge
|
||||
device pci 00.1 on end # - DPTF
|
||||
device pci 00.2 on end # - NPK
|
||||
device pci 02.0 on end # - Gen
|
||||
device pci 03.0 on end # - Iunit
|
||||
device pci 0d.0 on end # - P2SB
|
||||
device pci 0d.1 on end # - PMC
|
||||
device pci 0d.2 on end # - SPI
|
||||
device pci 0d.3 on end # - Shared SRAM
|
||||
device pci 0e.0 on # - Audio
|
||||
chip drivers/generic/max98357a
|
||||
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device pci 11.0 off end # - ISH
|
||||
device pci 12.0 off end # - SATA
|
||||
device pci 13.0 off end # - Root Port 2 - PCIe-A 0
|
||||
device pci 13.1 off end # - Root Port 3 - PCIe-A 1
|
||||
device pci 13.2 off end # - Root Port 4 - PCIe-A 2
|
||||
device pci 13.3 off end # - Root Port 5 - PCIe-A 3
|
||||
device pci 14.0 on
|
||||
chip drivers/intel/wifi
|
||||
register "wake" = "GPE0_DW3_00"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end # - Root Port 0 - PCIe-B 0 - Wifi
|
||||
device pci 14.1 off end # - Root Port 1 - PCIe-B 1
|
||||
device pci 15.0 on end # - XHCI
|
||||
device pci 15.1 off end # - XDCI
|
||||
device pci 16.0 on # - I2C 0
|
||||
chip drivers/i2c/da7219
|
||||
register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
|
||||
register "btn_cfg" = "50"
|
||||
register "mic_det_thr" = "500"
|
||||
register "jack_ins_deb" = "20"
|
||||
register "jack_det_rate" = ""32ms_64ms""
|
||||
register "jack_rem_deb" = "1"
|
||||
register "a_d_btn_thr" = "0xa"
|
||||
register "d_b_btn_thr" = "0x16"
|
||||
register "b_c_btn_thr" = "0x21"
|
||||
register "c_mic_btn_thr" = "0x3e"
|
||||
register "btn_avg" = "4"
|
||||
register "adc_1bit_rpt" = "1"
|
||||
register "micbias_lvl" = "2600"
|
||||
register "mic_amp_in_sel" = ""diff""
|
||||
device i2c 1a on end
|
||||
end
|
||||
end
|
||||
device pci 16.1 on end # - I2C 1
|
||||
device pci 16.2 on
|
||||
chip drivers/i2c/tpm
|
||||
register "hid" = ""GOOG0005""
|
||||
register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
|
||||
device i2c 50 on end
|
||||
end
|
||||
end # - I2C 2
|
||||
device pci 16.3 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0001""
|
||||
register "desc" = ""ELAN Touchscreen""
|
||||
register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
|
||||
register "probed" = "1"
|
||||
device i2c 10 on end
|
||||
end
|
||||
end # - I2C 3
|
||||
device pci 17.0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
|
||||
register "wake" = "GPE0_DW1_15"
|
||||
register "probed" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
end # - I2C 4
|
||||
device pci 17.1 on end # - I2C 5
|
||||
device pci 17.2 on end # - I2C 6
|
||||
device pci 17.3 on end # - I2C 7
|
||||
device pci 18.0 on end # - UART 0
|
||||
device pci 18.1 on end # - UART 1
|
||||
device pci 18.2 on end # - UART 2
|
||||
device pci 18.3 on end # - UART 3
|
||||
device pci 19.0 on end # - SPI 0
|
||||
device pci 19.1 on end # - SPI 1
|
||||
device pci 19.2 on end # - SPI 2
|
||||
device pci 1a.0 on end # - PWM
|
||||
device pci 1b.0 on end # - SDCARD
|
||||
device pci 1c.0 on end # - eMMC
|
||||
device pci 1e.0 off end # - SDIO
|
||||
device pci 1f.0 on # - LPC
|
||||
chip ec/google/chromeec
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end
|
||||
device pci 1f.1 on end # - SMBUS
|
||||
end
|
||||
end
|
||||
@@ -0,0 +1,89 @@
|
||||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2014 Google Inc.
|
||||
* Copyright (C) 2015 Intel Corporation.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#define DPTF_CPU_PASSIVE 95
|
||||
#define DPTF_CPU_CRITICAL 99
|
||||
#define DPTF_CPU_ACTIVE_AC0 90
|
||||
#define DPTF_CPU_ACTIVE_AC1 80
|
||||
#define DPTF_CPU_ACTIVE_AC2 70
|
||||
#define DPTF_CPU_ACTIVE_AC3 60
|
||||
#define DPTF_CPU_ACTIVE_AC4 50
|
||||
|
||||
#define DPTF_TSR0_SENSOR_ID 0
|
||||
#define DPTF_TSR0_SENSOR_NAME "Battery"
|
||||
#define DPTF_TSR0_PASSIVE 48
|
||||
#define DPTF_TSR0_CRITICAL 70
|
||||
|
||||
#define DPTF_TSR1_SENSOR_ID 1
|
||||
#define DPTF_TSR1_SENSOR_NAME "Ambient"
|
||||
#define DPTF_TSR1_PASSIVE 60
|
||||
#define DPTF_TSR1_CRITICAL 70
|
||||
|
||||
#define DPTF_TSR2_SENSOR_ID 2
|
||||
#define DPTF_TSR2_SENSOR_NAME "Charger"
|
||||
#define DPTF_TSR2_PASSIVE 55
|
||||
#define DPTF_TSR2_CRITICAL 100
|
||||
|
||||
#define DPTF_ENABLE_CHARGER
|
||||
|
||||
/* Charger performance states, board-specific values from charger and EC */
|
||||
Name (CHPS, Package () {
|
||||
Package () { 0, 0, 0, 0, 255, 0xBB8, "mA", 0 }, /* 3A (MAX) */
|
||||
Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */
|
||||
Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */
|
||||
Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */
|
||||
Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 }, /* 0.0A */
|
||||
})
|
||||
|
||||
Name (DTRT, Package () {
|
||||
/* CPU Throttle Effect on CPU */
|
||||
Package () { \_SB.PCI0.TCPU, \_SB.PCI0.TCPU, 100, 50, 0, 0, 0, 0 },
|
||||
|
||||
/* CPU Effect on Temp Sensor 0 */
|
||||
Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR0, 100, 600, 0, 0, 0, 0 },
|
||||
|
||||
#ifdef DPTF_ENABLE_CHARGER
|
||||
/* Charger Effect on Temp Sensor 1 */
|
||||
Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR1, 200, 600, 0, 0, 0, 0 },
|
||||
#endif
|
||||
|
||||
/* CPU Effect on Temp Sensor 1 */
|
||||
Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR1, 100, 600, 0, 0, 0, 0 },
|
||||
|
||||
/* CPU Effect on Temp Sensor 2 */
|
||||
Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR2, 100, 600, 0, 0, 0, 0 },
|
||||
})
|
||||
|
||||
Name (MPPC, Package ()
|
||||
{
|
||||
0x2, /* Revision */
|
||||
Package () { /* Power Limit 1 */
|
||||
0, /* PowerLimitIndex, 0 for Power Limit 1 */
|
||||
1600, /* PowerLimitMinimum */
|
||||
12000, /* PowerLimitMaximum */
|
||||
1000, /* TimeWindowMinimum */
|
||||
1000, /* TimeWindowMaximum */
|
||||
200 /* StepSize */
|
||||
},
|
||||
Package () { /* Power Limit 2 */
|
||||
1, /* PowerLimitIndex, 1 for Power Limit 2 */
|
||||
6000, /* PowerLimitMinimum */
|
||||
8000, /* PowerLimitMaximum */
|
||||
1000, /* TimeWindowMinimum */
|
||||
1000, /* TimeWindowMaximum */
|
||||
1000 /* StepSize */
|
||||
}
|
||||
})
|
||||
@@ -0,0 +1,21 @@
|
||||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright 2016 Google Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef MAINBOARD_EC_H
|
||||
#define MAINBOARD_EC_H
|
||||
|
||||
#include <baseboard/ec.h>
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,21 @@
|
||||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright 2016 Google Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef MAINBOARD_GPIO_H
|
||||
#define MAINBOARD_GPIO_H
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
|
||||
#endif /* MAINBOARD_GPIO_H */
|
||||
Reference in New Issue
Block a user