This patch unifies the use of config options in v2 to all start with CONFIG_

It's basically done with the following script and some manual fixup: VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC` for VAR in $VARS; do find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \; done Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30 15:17:49 +00:00
parent 9702b6bf7e
commit 0867062412
863 changed files with 14632 additions and 14632 deletions
--- a/src/northbridge/amd/amdfam10/Config.lb
+++ b/src/northbridge/amd/amdfam10/Config.lb
@@ -17,19 +17,19 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 #

-uses AGP_APERTURE_SIZE
-uses HAVE_ACPI_TABLES
-uses HAVE_HIGH_TABLES
+uses CONFIG_AGP_APERTURE_SIZE
+uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

-default AGP_APERTURE_SIZE=0x4000000
-default HAVE_HIGH_TABLES=1
+default CONFIG_AGP_APERTURE_SIZE=0x4000000
+default CONFIG_HAVE_HIGH_TABLES=1

 config chip.h

 driver northbridge.o
 driver misc_control.o

-if HAVE_ACPI_TABLES
+if CONFIG_HAVE_ACPI_TABLES
 	object amdfam10_acpi.o
 	makerule ssdt.c
 		depends "$(TOP)/src/northbridge/amd/amdfam10/ssdt.dsl"
--- a/src/northbridge/amd/amdfam10/amdfam10.h
+++ b/src/northbridge/amd/amdfam10/amdfam10.h
@@ -958,9 +958,9 @@ that are corresponding to 0x01, 0x02, 0x03, 0x05, 0x06, 0x07

 #ifdef __ROMCC__
 #if NODE_NUMS==64
-	 #define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CBB,(CDB+x),fn)):(PCI_DEV((CBB-1),(CDB+x-32),fn)))
+	 #define NODE_PCI(x, fn) ((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
 #else
-	 #define NODE_PCI(x, fn) PCI_DEV(CBB,(CDB+x),fn)
+	 #define NODE_PCI(x, fn) PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
 #endif
 #endif

@@ -1025,7 +1025,7 @@ struct nodes_info_t {
 //#define MEM_CS_COPY 1
 #define MEM_CS_COPY NODE_NUMS

-#if MEM_TRAIN_SEQ == 0
+#if CONFIG_MEM_TRAIN_SEQ == 0
 	#define DQS_DELAY_COPY NODE_NUMS
 #else
 //	#define DQS_DELAY_COPY 1
--- a/src/northbridge/amd/amdfam10/amdfam10_acpi.c
+++ b/src/northbridge/amd/amdfam10/amdfam10_acpi.c
@@ -134,7 +134,7 @@ unsigned long acpi_fill_slit(unsigned long current)
 	/* fill the first 8 byte with that num */
 	/* fill the next num*num byte with distance, local is 10, 1 hop mean 20, and 2 hop with 30.... */

-	struct sys_info *sysinfox = (struct sys_info *)((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE);
+	struct sys_info *sysinfox = (struct sys_info *)((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 	u8 *ln = sysinfox->ln;


@@ -190,7 +190,7 @@ void update_ssdt(void *ssdt)
 	u8 *CBST;
 	u8 *CBBX;
 	u8 *CBS2;
-	u8 *CBB2;
+	u8 *CONFIG_CBB2;


 	int i;
@@ -208,7 +208,7 @@ void update_ssdt(void *ssdt)
 	HCDN = ssdt+0x57a; //+5 will be next HCDN
 	CBBX = ssdt+0x61f; //
 	CBST = ssdt+0x626;
-	CBB2 = ssdt+0x62d; //
+	CONFIG_CBB2 = ssdt+0x62d; //
 	CBS2 = ssdt+0x634;

 	for(i=0;i<HC_NUMS;i++) {
@@ -245,9 +245,9 @@ void update_ssdt(void *ssdt)
 		int_to_stream(0x20202020, HCDN + i*5);
 	}

-	*CBBX = (u8)(CBB);
+	*CBBX = (u8)(CONFIG_CBB);

-	if(CBB == 0xff) {
+	if(CONFIG_CBB == 0xff) {
 		*CBST = (u8) (0x0f);
 	} else {
 		if((sysconf.pci1234[0] >> 12) & 0xff) { //sb chain on  other than bus 0
@@ -258,12 +258,12 @@ void update_ssdt(void *ssdt)
 		}
 	}

-	if((CBB == 0xff) && (sysconf.nodes>32)) {
+	if((CONFIG_CBB == 0xff) && (sysconf.nodes>32)) {
 		 *CBS2 = 0x0f;
-		 *CBB2 = (u8)(CBB-1);
+		 *CONFIG_CBB2 = (u8)(CONFIG_CBB-1);
 	} else {
 		*CBS2 = 0x00;
-		*CBB2 = 0x00;
+		*CONFIG_CBB2 = 0x00;
 	}

 }
--- a/src/northbridge/amd/amdfam10/amdfam10_conf.c
+++ b/src/northbridge/amd/amdfam10/amdfam10_conf.c
@@ -33,12 +33,12 @@ static struct dram_base_mask_t get_dram_base_mask(u32 nodeid)
 	device_t dev;
 	struct dram_base_mask_t d;
 #if defined(__ROMCC__)
-	dev = PCI_DEV(CBB, CDB, 1);
+	dev = PCI_DEV(CONFIG_CBB, CONFIG_CDB, 1);
 #else
 	dev = __f1_dev[0];
 #endif

-#if EXT_CONF_SUPPORT == 1
+#if CONFIG_EXT_CONF_SUPPORT == 1
 	// I will use ext space only for simple
 	pci_write_config32(dev, 0x110, nodeid | (1<<28)); // [47:27] at [28:8]
 	d.mask = pci_read_config32(dev, 0x114);  // enable is bit 0
@@ -65,7 +65,7 @@ static void set_dram_base_mask(u32 nodeid, struct dram_base_mask_t d, u32 nodes)
 {
 	u32 i;
 	device_t dev;
-#if EXT_CONF_SUPPORT == 1
+#if CONFIG_EXT_CONF_SUPPORT == 1
 	// I will use ext space only for simple
 	u32 d_base_i, d_base_d, d_mask_i, d_mask_d;
 	d_base_i = nodeid | (0<<28);
@@ -94,7 +94,7 @@ static void set_dram_base_mask(u32 nodeid, struct dram_base_mask_t d, u32 nodes)
 		dev = __f1_dev[i];
 #endif

-#if EXT_CONF_SUPPORT == 1
+#if CONFIG_EXT_CONF_SUPPORT == 1
 		// I will use ext space only for simple
 		pci_write_config32(dev, 0x110, d_base_i);
 		pci_write_config32(dev, 0x114, d_base_d); //[47:27] at [28:8];
@@ -232,7 +232,7 @@ static u32 get_one_DCT(struct mem_info *meminfo)
 	return one_DCT;
 }
 #endif
-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0

 static u32 hoist_memory(u32 hole_startk, u32 i, u32 one_DCT, u32 nodes)
 {
@@ -316,7 +316,7 @@ static u32 hoist_memory(u32 hole_startk, u32 i, u32 one_DCT, u32 nodes)
 #endif


-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 static void set_addr_map_reg_4_6_in_one_node(u32 nodeid, u32 cfg_map_dest,
 						u32 busn_min, u32 busn_max,
 						u32 type)
@@ -388,7 +388,7 @@ static void set_config_map_reg(u32 nodeid, u32 linkn, u32 ht_c_index,
 	busn_min>>=segbit;
 	busn_max>>=segbit;

-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	if(ht_c_index < 4) {
 #endif
 		tempreg = 3 | ((nodeid&0xf)<<4) | ((nodeid & 0x30)<<(12-4))|(linkn<<8)|((busn_min & 0xff)<<16)|((busn_max&0xff)<<24);
@@ -400,7 +400,7 @@ static void set_config_map_reg(u32 nodeid, u32 linkn, u32 ht_c_index,
 		#endif
 			pci_write_config32(dev, 0xe0 + ht_c_index * 4, tempreg);
 		}
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT

 		return;
 	}
@@ -429,7 +429,7 @@ static void clear_config_map_reg(u32 nodeid, u32 linkn, u32 ht_c_index,
 	u32 i;
 	device_t dev;

-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	if(ht_c_index<4) {
 #endif
 		for(i=0; i<nodes; i++) {
@@ -440,7 +440,7 @@ static void clear_config_map_reg(u32 nodeid, u32 linkn, u32 ht_c_index,
 		#endif
 			pci_write_config32(dev, 0xe0 + ht_c_index * 4, 0);
 		}
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 		return;
 	}

@@ -458,7 +458,7 @@ static void clear_config_map_reg(u32 nodeid, u32 linkn, u32 ht_c_index,

 }

-#if PCI_BUS_SEGN_BITS
+#if CONFIG_PCI_BUS_SEGN_BITS
 static u32 check_segn(device_t dev, u32 segbusn, u32 nodes,
 			sys_info_conf_t *sysinfo)
 {
@@ -488,7 +488,7 @@ static void set_ht_c_io_addr_reg(u32 nodeid, u32 linkn, u32 ht_c_index,
 	u32 tempreg;
 	device_t dev;

-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	if(ht_c_index<4) {
 #endif
 		/* io range allocation */
@@ -510,7 +510,7 @@ static void set_ht_c_io_addr_reg(u32 nodeid, u32 linkn, u32 ht_c_index,
 		#endif
 			pci_write_config32(dev, 0xC0 + ht_c_index * 8, tempreg);
 		}
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 		return;
 	}

@@ -541,7 +541,7 @@ static void clear_ht_c_io_addr_reg(u32 nodeid, u32 linkn, u32 ht_c_index,
 {
 	u32 i;
 	device_t dev;
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	if(ht_c_index<4) {
 #endif
 		 /* io range allocation */
@@ -554,7 +554,7 @@ static void clear_ht_c_io_addr_reg(u32 nodeid, u32 linkn, u32 ht_c_index,
 			pci_write_config32(dev, 0xC4 + ht_c_index * 8, 0);
 			pci_write_config32(dev, 0xC0 + ht_c_index * 8, 0);
 		}
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 		return;
 	}
 	// : if hc_c_index > 3, We should use io_min, io_max to clear extend space
@@ -592,7 +592,7 @@ static void re_set_all_config_map_reg(u32 nodes, u32 segbit,
 			pci_write_config32(dev, 0xe0 + ht_c_index * 4, 0);
 		}
 	}
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	u32 j;
 	// clear the extend space
 	for(j = 0; j< nodes; j++) {
@@ -624,7 +624,7 @@ static u32 get_ht_c_index(u32 nodeid, u32 linkn, sys_info_conf_t *sysinfo)
 	tempreg = 3 | ((nodeid & 0xf) <<4) | ((nodeid & 0x30)<<(12-4)) | (linkn<<8);

 	for(ht_c_index=0;ht_c_index<4; ht_c_index++) {
-		reg = pci_read_config32(PCI_DEV(CBB, CDB, 1), 0xe0 + ht_c_index * 4);
+		reg = pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 1), 0xe0 + ht_c_index * 4);
 		if(((reg & 0xffff) == 0x0000)) {  /*found free*/
 			break;
 		}
@@ -660,7 +660,7 @@ static void store_ht_c_conf_bus(u32 nodeid, u32 linkn, u32 ht_c_index,

 static  void set_BusSegmentEn(u32 node, u32 segbit)
 {
-#if PCI_BUS_SEGN_BITS
+#if CONFIG_PCI_BUS_SEGN_BITS
 	u32 dword;
 	device_t dev;

@@ -715,12 +715,12 @@ static void store_conf_io_addr(u32 nodeid, u32 linkn, u32 reg, u32 index,
 				u32 io_min, u32 io_max)
 {
 	u32 val;
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	if(reg!=0x110) {
 #endif
 		/* io range allocation */
 		index = (reg-0xc0)>>3;
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	} else {
 		index+=4;
 	}
@@ -740,12 +740,12 @@ static void store_conf_mmio_addr(u32 nodeid, u32 linkn, u32 reg, u32 index,
 					u32 mmio_min, u32 mmio_max)
 {
 	u32 val;
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	if(reg!=0x110) {
 #endif
 		/* io range allocation */
 		index = (reg-0x80)>>3;
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	} else {
 		index+=8;
 	}
@@ -767,7 +767,7 @@ static void set_io_addr_reg(device_t dev, u32 nodeid, u32 linkn, u32 reg,

 	u32 i;
 	u32 tempreg;
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	if(reg!=0x110) {
 #endif
 		/* io range allocation */
@@ -789,7 +789,7 @@ static void set_io_addr_reg(device_t dev, u32 nodeid, u32 linkn, u32 reg,
 #endif
 		for(i=0; i<sysconf.nodes; i++)
 			pci_write_config32(__f1_dev[i], reg, tempreg);
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 		return;
 	}

@@ -816,7 +816,7 @@ static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index, u32 mmi

 	u32 i;
 	u32 tempreg;
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 	if(reg!=0x110) {
 #endif
 		/* io range allocation */
@@ -826,7 +826,7 @@ static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index, u32 mmi
 		tempreg = 3 | (nodeid & 0x30) | (mmio_min&0xffffff00);
 		for(i=0; i<sysconf.nodes; i++)
 			pci_write_config32(__f1_dev[i], reg, tempreg);
-#if EXT_CONF_SUPPORT
+#if CONFIG_EXT_CONF_SUPPORT
 		return;
 	}

--- a/src/northbridge/amd/amdfam10/debug.c
+++ b/src/northbridge/amd/amdfam10/debug.c
@@ -34,7 +34,7 @@ static  void print_debug_addr(const char *str, void *val)

 static void print_debug_pci_dev(u32 dev)
 {
-#if PCI_BUS_SEGN_BITS==0
+#if CONFIG_PCI_BUS_SEGN_BITS==0
 	printk_debug("PCI: %02x:%02x.%02x", (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7);
 #else
 	printk_debug("PCI: %04x:%02x:%02x.%02x", (dev>>28) & 0x0f, (dev>>20) & 0xff, (dev>>15) & 0x1f, (dev>>12) & 0x7);
--- a/src/northbridge/amd/amdfam10/early_ht.c
+++ b/src/northbridge/amd/amdfam10/early_ht.c
@@ -21,7 +21,7 @@
 // mmconf is not ready yet
 static  void set_bsp_node_CHtExtNodeCfgEn(void)
 {
-#if EXT_RT_TBL_SUPPORT == 1
+#if CONFIG_EXT_RT_TBL_SUPPORT == 1
 	u32 dword;
 	dword = pci_io_read_config32(PCI_DEV(0, 0x18, 0), 0x68);
 	dword |= (1<<27) | (1<<25);
@@ -34,14 +34,14 @@ static  void set_bsp_node_CHtExtNodeCfgEn(void)

 	/* CHtExtAddrEn */
 	pci_io_write_config32(PCI_DEV(0, 0x18, 0), 0x68, dword);
-	// CPU on bus 0xff and 0xfe now. For now on we can use CBB and CDB.
+	// CPU on bus 0xff and 0xfe now. For now on we can use CONFIG_CBB and CONFIG_CDB.
 #endif
 }

 static void enumerate_ht_chain(void)
 {
-#if HT_CHAIN_UNITID_BASE != 0
-/* HT_CHAIN_UNITID_BASE could be 0 (only one ht device in the ht chain),
+#if CONFIG_HT_CHAIN_UNITID_BASE != 0
+/* CONFIG_HT_CHAIN_UNITID_BASE could be 0 (only one ht device in the ht chain),
   if so, don't need to go through the chain  */

 	/* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
@@ -50,16 +50,16 @@ static void enumerate_ht_chain(void)
 	 * links needs to be programed to point at bus 0.
 	 */
 	unsigned next_unitid, last_unitid = 0;
-#if HT_CHAIN_END_UNITID_BASE != 0x20
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
 	// let't record the device of last ht device, So we can set the
-	// Unitid to HT_CHAIN_END_UNITID_BASE
+	// Unitid to CONFIG_HT_CHAIN_END_UNITID_BASE
 	unsigned real_last_unitid = 0;
 	u8 real_last_pos = 0;
 	int ht_dev_num = 0; // except host_bridge
 	u8 end_used = 0;
 #endif

-	next_unitid = HT_CHAIN_UNITID_BASE;
+	next_unitid = CONFIG_HT_CHAIN_UNITID_BASE;
 	do {
 		u32 id;
 		u8 hdr_type, pos;
@@ -99,10 +99,10 @@ static void enumerate_ht_chain(void)
 					unsigned ctrl, ctrl_off;
 					device_t devx;

-#if HT_CHAIN_END_UNITID_BASE != 0x20
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
 					if(next_unitid>=0x18) {
 						if(!end_used) {
-							next_unitid = HT_CHAIN_END_UNITID_BASE;
+							next_unitid = CONFIG_HT_CHAIN_END_UNITID_BASE;
 							end_used = 1;
 						} else {
 							goto out;
@@ -112,7 +112,7 @@ static void enumerate_ht_chain(void)
 					real_last_pos = pos;
 					ht_dev_num++ ;
 #endif
-		#if HT_CHAIN_END_UNITID_BASE == 0
+		#if CONFIG_HT_CHAIN_END_UNITID_BASE == 0
 					if (!next_unitid)
 						goto out;
 		#endif
@@ -161,12 +161,12 @@ static void enumerate_ht_chain(void)
 	} while(last_unitid != next_unitid);

 out:	;
-#if HT_CHAIN_END_UNITID_BASE != 0x20
-	if((ht_dev_num>1) && (real_last_unitid != HT_CHAIN_END_UNITID_BASE) && !end_used) {
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
+	if((ht_dev_num>1) && (real_last_unitid != CONFIG_HT_CHAIN_END_UNITID_BASE) && !end_used) {
 		u16 flags;
 		flags = pci_io_read_config16(PCI_DEV(0,real_last_unitid,0), real_last_pos + PCI_CAP_FLAGS);
 		flags &= ~0x1f;
-		flags |= HT_CHAIN_END_UNITID_BASE & 0x1f;
+		flags |= CONFIG_HT_CHAIN_END_UNITID_BASE & 0x1f;
 		pci_io_write_config16(PCI_DEV(0, real_last_unitid, 0), real_last_pos + PCI_CAP_FLAGS, flags);
 	}
 #endif
--- a/src/northbridge/amd/amdfam10/get_pci1234.c
+++ b/src/northbridge/amd/amdfam10/get_pci1234.c
@@ -49,7 +49,7 @@
 * reset HC_POSSIBLE_NUM and update ssdt.dsl (hcdn, hclk)
 *
 * Put all the possible ht node/link to the list tp pci1234[] in  get_bus_conf.c
- * on MB dir. Also, don't forget to increase the ACPI_SSDTX_NUM etc if you have
+ * on MB dir. Also, don't forget to increase the CONFIG_ACPI_SSDTX_NUM etc if you have
 * too much SSDT. How about co-processor on socket 1 on 2 way system.
 * or socket 2, and socket3 on 4 way system? treat that as one hc too!
 *
--- a/src/northbridge/amd/amdfam10/misc_control.c
+++ b/src/northbridge/amd/amdfam10/misc_control.c
@@ -59,7 +59,7 @@ static void mcf3_read_resources(device_t dev)
 	pci_dev_read_resources(dev);

 	/* If we are not the first processor don't allocate the gart apeture */
-	if (dev->path.pci.devfn != PCI_DEVFN(CDB, 3)) {
+	if (dev->path.pci.devfn != PCI_DEVFN(CONFIG_CDB, 3)) {
 		return;
 	}

@@ -69,7 +69,7 @@ static void mcf3_read_resources(device_t dev)
 	if (iommu) {
 		/* Add a Gart apeture resource */
 		resource = new_resource(dev, 0x94);
-		resource->size = iommu?AGP_APERTURE_SIZE:1;
+		resource->size = iommu?CONFIG_AGP_APERTURE_SIZE:1;
 		resource->align = log2(resource->size);
 		resource->gran  = log2(resource->size);
 		resource->limit = 0xffffffff; /* 4G */
--- a/src/northbridge/amd/amdfam10/northbridge.c
+++ b/src/northbridge/amd/amdfam10/northbridge.c
@@ -42,7 +42,7 @@

 #include "amdfam10.h"

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 #include <cpu/amd/model_10xxx_rev.h>
 #endif

@@ -60,13 +60,13 @@ device_t get_node_pci(u32 nodeid, u32 fn)
 {
 #if NODE_NUMS == 64
 	if(nodeid<32) {
-		return dev_find_slot(CBB, PCI_DEVFN(CDB + nodeid, fn));
+		return dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB + nodeid, fn));
 	} else {
-		return dev_find_slot(CBB-1, PCI_DEVFN(CDB + nodeid - 32, fn));
+		return dev_find_slot(CONFIG_CBB-1, PCI_DEVFN(CONFIG_CDB + nodeid - 32, fn));
 	}

 #else
-	return dev_find_slot(CBB, PCI_DEVFN(CDB + nodeid, fn));
+	return dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB + nodeid, fn));
 #endif

 }
@@ -83,7 +83,7 @@ static void get_fx_devs(void)
 		__f4_dev[i] = get_node_pci(i, 4);
 	}
 	if (!__f1_dev[0]) {
-		printk_err("Cannot find %02x:%02x.1", CBB, CDB);
+		printk_err("Cannot find %02x:%02x.1", CONFIG_CBB, CONFIG_CDB);
 		die("Cannot go on\n");
 	}
 }
@@ -113,14 +113,14 @@ static u32 amdfam10_nodeid(device_t dev)
 #if NODE_NUMS == 64
 	unsigned busn;
 	busn = dev->bus->secondary;
-	if(busn != CBB) {
-		return (dev->path.pci.devfn >> 3) - CDB + 32;
+	if(busn != CONFIG_CBB) {
+		return (dev->path.pci.devfn >> 3) - CONFIG_CDB + 32;
 	} else {
-		return (dev->path.pci.devfn >> 3) - CDB;
+		return (dev->path.pci.devfn >> 3) - CONFIG_CDB;
 	}

 #else
-	return (dev->path.pci.devfn >> 3) - CDB;
+	return (dev->path.pci.devfn >> 3) - CONFIG_CDB;
 #endif
 }

@@ -156,7 +156,7 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, u32 link, u32 sblink,
 		u32 busn = max&0xff;
 		u32 max_devfn;

-#if HT3_SUPPORT==1
+#if CONFIG_HT3_SUPPORT==1
 		if(is_sublink1) {
 			u32 regpos;
 			u32 reg;
@@ -187,7 +187,7 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, u32 link, u32 sblink,
 		 */
 		ht_c_index = get_ht_c_index(nodeid, link, &sysconf);

-#if EXT_CONF_SUPPORT == 0
+#if CONFIG_EXT_CONF_SUPPORT == 0
 		if(ht_c_index>=4) return max;
 #endif

@@ -196,12 +196,12 @@ static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, u32 link, u32 sblink,
 		 * so we set the subordinate bus number to 0xff for the moment.
 		 */

-#if SB_HT_CHAIN_ON_BUS0 > 0
+#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0
 		// first chain will on bus 0
 		if((nodeid == 0) && (sblink==link)) { // actually max is 0 here
 			 min_bus = max;
 		}
-	#if SB_HT_CHAIN_ON_BUS0 > 1
+	#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 1
 		// second chain will be on 0x40, third 0x80, forth 0xc0
 		// i would refined that to  2, 3, 4 ==> 0, 0x, 40, 0x80, 0xc0
 		//			    >4 will use	 more segments, We can have 16 segmment and every segment have 256 bus, For that case need the kernel support mmio pci config.
@@ -295,9 +295,9 @@ static u32 amdfam10_scan_chains(device_t dev, u32 max)


 // Put sb chain in bus 0
-#if SB_HT_CHAIN_ON_BUS0 > 0
+#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0
 	if(nodeid==0) {
-	#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
+	#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
 		offset_unitid = 1;
 	#endif
 		max = amdfam10_scan_chain(dev, nodeid, sblink, sblink, max, offset_unitid ); // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0
@@ -305,18 +305,18 @@ static u32 amdfam10_scan_chains(device_t dev, u32 max)
 #endif


-#if PCI_BUS_SEGN_BITS
+#if CONFIG_PCI_BUS_SEGN_BITS
 	max = check_segn(dev, max, sysconf.nodes, &sysconf);
 #endif


 	for(link = 0; link < dev->links; link++) {
-#if SB_HT_CHAIN_ON_BUS0 > 0
+#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0
 		if( (nodeid == 0) && (sblink == link) ) continue; //already done
 #endif
 		offset_unitid = 0;
-		#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
-			#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+		#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+			#if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
 			if((nodeid == 0) && (sblink == link))
 			#endif
 				offset_unitid = 1;
@@ -434,7 +434,7 @@ static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link)
 	resource =  amdfam10_find_iopair(dev, nodeid, link);
 	if (resource) {
 		u32 align;
-#if EXT_CONF_SUPPORT == 1
+#if CONFIG_EXT_CONF_SUPPORT == 1
 		if((resource->index & 0x1fff) == 0x1110) { // ext
 			align = 8;
 		}
@@ -464,7 +464,7 @@ static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link)
 			IORESOURCE_MEM | IORESOURCE_PREFETCH,
 			IORESOURCE_MEM | IORESOURCE_PREFETCH);

-#if EXT_CONF_SUPPORT == 1
+#if CONFIG_EXT_CONF_SUPPORT == 1
 		if((resource->index & 0x1fff) == 0x1110) { // ext
 			normalize_resource(resource);
 		}
@@ -485,7 +485,7 @@ static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link)
 			IORESOURCE_MEM | IORESOURCE_PREFETCH,
 			IORESOURCE_MEM);

-#if EXT_CONF_SUPPORT == 1
+#if CONFIG_EXT_CONF_SUPPORT == 1
 		if((resource->index & 0x1fff) == 0x1110) { // ext
 			normalize_resource(resource);
 		}
@@ -774,7 +774,7 @@ static u32 find_pci_tolm(struct bus *bus, u32 tolm)
 #define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH)
 #endif

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0

 struct hw_mem_hole_info {
 	unsigned hole_startk;
@@ -786,7 +786,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void)
 		struct hw_mem_hole_info mem_hole;
 		int i;

-		mem_hole.hole_startk = HW_MEM_HOLE_SIZEK;
+		mem_hole.hole_startk = CONFIG_HW_MEM_HOLE_SIZEK;
 		mem_hole.node_id = -1;

 		for (i = 0; i < sysconf.nodes; i++) {
@@ -840,7 +840,7 @@ static void disable_hoist_memory(unsigned long hole_startk, int i)
 	u32 hole_sizek;

 	u32 one_DCT;
-	struct sys_info *sysinfox = (struct sys_info *)((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+	struct sys_info *sysinfox = (struct sys_info *)((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
 	struct mem_info *meminfo;
 	meminfo = &sysinfox->meminfo[i];

@@ -911,7 +911,7 @@ static void disable_hoist_memory(unsigned long hole_startk, int i)

 #endif

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -926,7 +926,7 @@ static void pci_domain_set_resources(device_t dev)
 	u32 pci_tolm;
 	int i, idx;
 	u32 link;
-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 	struct hw_mem_hole_info mem_hole;
 	u32 reset_memhole = 1;
 #endif
@@ -1003,7 +1003,7 @@ static void pci_domain_set_resources(device_t dev)
 	/* Round the mmio hold to 64M */
 	mmio_basek &= ~((64*1024) - 1);

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 /* if the hw mem hole is already set in raminit stage, here we will compare
 * mmio_basek and hole_basek. if mmio_basek is bigger that hole_basek and will
 * use hole_basek as mmio_basek and we don't need to reset hole.
@@ -1023,7 +1023,7 @@ static void pci_domain_set_resources(device_t dev)

 	if(reset_memhole) {
 		if(mem_hole.node_id!=-1) {
-		/* We need to select HW_MEM_HOLE_SIZEK for raminit, it can not
+		/* We need to select CONFIG_HW_MEM_HOLE_SIZEK for raminit, it can not
 		    make hole_startk to some basek too!
 		   We need to reset our Mem Hole, because We want more big HOLE
 		    than we already set
@@ -1033,7 +1033,7 @@ static void pci_domain_set_resources(device_t dev)
 			disable_hoist_memory(mem_hole.hole_startk, mem_hole.node_id);
 		}

-	#if HW_MEM_HOLE_SIZE_AUTO_INC == 1
+	#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1
 		// We need to double check if the mmio_basek is valid for hole
 		// setting, if it is equal to basek, we need to decrease it some
 		resource_t basek_pri;
@@ -1089,7 +1089,7 @@ static void pci_domain_set_resources(device_t dev)
 					ram_resource(dev, (idx | i), basek, pre_sizek);
 					idx += 0x10;
 					sizek -= pre_sizek;
-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 					if (i==0 && high_tables_base==0) {
 					/* Leave some space for ACPI, PIRQ and MP tables */
 						high_tables_base = (mmio_basek - HIGH_TABLES_SIZE) * 1024;
@@ -1100,9 +1100,9 @@ static void pci_domain_set_resources(device_t dev)
 #endif
 				}
 				#if CONFIG_AMDMCT == 0
-				#if HW_MEM_HOLE_SIZEK != 0
+				#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 				if(reset_memhole) {
-					struct sys_info *sysinfox = (struct sys_info *)((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+					struct sys_info *sysinfox = (struct sys_info *)((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
 					struct mem_info *meminfo;
 					meminfo = &sysinfox->meminfo[i];
 					sizek += hoist_memory(mmio_basek,i, get_one_DCT(meminfo), sysconf.nodes);
@@ -1122,7 +1122,7 @@ static void pci_domain_set_resources(device_t dev)
 		}
 		ram_resource(dev, (idx | i), basek, sizek);
 		idx += 0x10;
-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		printk_debug("%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n",
 			     i, mmio_basek, basek, limitk);
 		if (i==0 && high_tables_base==0) {
@@ -1150,7 +1150,7 @@ static u32 pci_domain_scan_bus(device_t dev, u32 max)
 	for(reg = 0xe0; reg <= 0xec; reg += 4) {
 		f1_write_config32(reg, 0);
 	}
-#if EXT_CONF_SUPPORT == 1
+#if CONFIG_EXT_CONF_SUPPORT == 1
 	// all nodes
 	for(i = 0; i< sysconf.nodes; i++) {
 		int index;
@@ -1164,7 +1164,7 @@ static u32 pci_domain_scan_bus(device_t dev, u32 max)


 	for(i=0;i<dev->links;i++) {
-		max = pci_scan_bus(&dev->link[i], PCI_DEVFN(CDB, 0), 0xff, max);
+		max = pci_scan_bus(&dev->link[i], PCI_DEVFN(CONFIG_CDB, 0), 0xff, max);
 	}

 	/* Tune the hypertransport transaction for best performance.
@@ -1197,7 +1197,7 @@ static struct device_operations pci_domain_ops = {
 	.enable_resources = enable_childrens_resources,
 	.init		  = 0,
 	.scan_bus	  = pci_domain_scan_bus,
-#if MMCONF_SUPPORT_DEFAULT
+#if CONFIG_MMCONF_SUPPORT_DEFAULT
 	.ops_pci_bus	  = &pci_ops_mmconf,
 #else
 	.ops_pci_bus	  = &pci_cf8_conf1,
@@ -1228,16 +1228,16 @@ static void sysconf_init(device_t dev) // first node
 	sysconf.bsp_apicid = lapicid();
 	sysconf.apicid_offset = sysconf.bsp_apicid;

-#if (ENABLE_APIC_EXT_ID == 1)
+#if (CONFIG_ENABLE_APIC_EXT_ID == 1)
 	if (pci_read_config32(dev, 0x68) & (HTTC_APIC_EXT_ID|HTTC_APIC_EXT_BRD_CST))
 	{
 		sysconf.enabled_apic_ext_id = 1;
 	}
-	#if (APIC_ID_OFFSET>0)
+	#if (CONFIG_APIC_ID_OFFSET>0)
 	if(sysconf.enabled_apic_ext_id) {
 		if(sysconf.bsp_apicid == 0) {
 			/* bsp apic id is not changed */
-			sysconf.apicid_offset = APIC_ID_OFFSET;
+			sysconf.apicid_offset = CONFIG_APIC_ID_OFFSET;
 		} else {
 			sysconf.lift_bsp_apicid = 1;
 		}
@@ -1281,14 +1281,14 @@ static u32 cpu_bus_scan(device_t dev, u32 max)

 	nb_cfg_54 = read_nb_cfg_54();

-#if CBB
-	dev_mc = dev_find_slot(0, PCI_DEVFN(CDB, 0)); //0x00
+#if CONFIG_CBB
+	dev_mc = dev_find_slot(0, PCI_DEVFN(CONFIG_CDB, 0)); //0x00
 	if(dev_mc && dev_mc->bus) {
 		printk_debug("%s found", dev_path(dev_mc));
 		pci_domain = dev_mc->bus->dev;
 		if(pci_domain && (pci_domain->path.type == DEVICE_PATH_PCI_DOMAIN)) {
 			printk_debug("\n%s move to ",dev_path(dev_mc));
-			dev_mc->bus->secondary = CBB; // move to 0xff
+			dev_mc->bus->secondary = CONFIG_CBB; // move to 0xff
 			printk_debug("%s",dev_path(dev_mc));

 		} else {
@@ -1297,7 +1297,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max)
 		printk_debug("\n");

 	}
-	dev_mc = dev_find_slot(CBB, PCI_DEVFN(CDB, 0));
+	dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0));
 	if(!dev_mc) {
 		dev_mc = dev_find_slot(0, PCI_DEVFN(0x18, 0));
 		if (dev_mc && dev_mc->bus) {
@@ -1306,7 +1306,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max)
 			if(pci_domain && (pci_domain->path.type == DEVICE_PATH_PCI_DOMAIN)) {
 				if((pci_domain->links==1) && (pci_domain->link[0].children == dev_mc)) {
 					printk_debug("%s move to ",dev_path(dev_mc));
-					dev_mc->bus->secondary = CBB; // move to 0xff
+					dev_mc->bus->secondary = CONFIG_CBB; // move to 0xff
 					printk_debug("%s\n",dev_path(dev_mc));
 					while(dev_mc){
 						printk_debug("%s move to ",dev_path(dev_mc));
@@ -1321,9 +1321,9 @@ static u32 cpu_bus_scan(device_t dev, u32 max)

 #endif

-	dev_mc = dev_find_slot(CBB, PCI_DEVFN(CDB, 0));
+	dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0));
 	if (!dev_mc) {
-		printk_err("%02x:%02x.0 not found", CBB, CDB);
+		printk_err("%02x:%02x.0 not found", CONFIG_CBB, CONFIG_CDB);
 		die("");
 	}

@@ -1331,7 +1331,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max)

 	nodes = sysconf.nodes;

-#if CBB && (NODE_NUMS > 32)
+#if CONFIG_CBB && (NODE_NUMS > 32)
 	if(nodes>32) { // need to put node 32 to node 63 to bus 0xfe
 		if(pci_domain->links==1) {
 			pci_domain->links++; // from 1 to 2
@@ -1340,7 +1340,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max)
 			pci_domain->link[1].children = 0;
 			printk_debug("%s links increase to %d\n", dev_path(pci_domain), pci_domain->links);
 		}
-		pci_domain->link[1].secondary = CBB - 1;
+		pci_domain->link[1].secondary = CONFIG_CBB - 1;
 	}
 #endif
 	/* Find which cpus are present */
@@ -1351,10 +1351,10 @@ static u32 cpu_bus_scan(device_t dev, u32 max)
 		unsigned busn, devn;
 		struct bus *pbus;

-		busn = CBB;
-		devn = CDB+i;
+		busn = CONFIG_CBB;
+		devn = CONFIG_CDB+i;
 		pbus = dev_mc->bus;
-#if CBB && (NODE_NUMS > 32)
+#if CONFIG_CBB && (NODE_NUMS > 32)
 		if(i>=32) {
 			busn--;
 			devn-=32;
@@ -1381,7 +1381,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max)
 			 */
 			int j;
 			int linknum;
-#if HT3_SUPPORT==1
+#if CONFIG_HT3_SUPPORT==1
 			linknum = 8;
 #else
 			linknum = 4;
@@ -1440,7 +1440,7 @@ static u32 cpu_bus_scan(device_t dev, u32 max)
 			if (cpu) {
 				cpu->path.apic.node_id = i;
 				cpu->path.apic.core_id = j;
-	#if (ENABLE_APIC_EXT_ID == 1) && (APIC_ID_OFFSET>0)
+	#if (CONFIG_ENABLE_APIC_EXT_ID == 1) && (CONFIG_APIC_ID_OFFSET>0)
 				 if(sysconf.enabled_apic_ext_id) {
 					if(sysconf.lift_bsp_apicid) {
 						cpu->path.apic.apic_id += sysconf.apicid_offset;
--- a/src/northbridge/amd/amdfam10/raminit.h
+++ b/src/northbridge/amd/amdfam10/raminit.h
@@ -21,7 +21,7 @@
 #define RAMINIT_H

 #if 0
-#if DIMM_SUPPORT==0x0110
+#if CONFIG_DIMM_SUPPORT==0x0110
 //FBDIMM REG
 /* each channel can have 8 fbdimm */
 #define DIMM_SOCKETS 8
@@ -42,7 +42,7 @@ struct mem_controller {
 #endif
 #endif

-//#if (DIMM_SUPPORT & 0x00ff)==0x0004
+//#if (CONFIG_DIMM_SUPPORT & 0x00ff)==0x0004
 //DDR2 REG and unbuffered : Socket F 1027 and AM3
 /* every channel have 4 DDR2 DIMM for socket F
 *		       2 for socket M2/M3
--- a/src/northbridge/amd/amdfam10/raminit_amdmct.c
+++ b/src/northbridge/amd/amdfam10/raminit_amdmct.c
@@ -84,7 +84,7 @@ int mctRead_SPD(u32 smaddr, u32 reg)

 void mctSMBhub_Init(u32 node)
 {
-	struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 	struct mem_controller *ctrl = &( sysinfo->ctrl[node] );
 	activate_spd_rom(ctrl);
 }
@@ -93,7 +93,7 @@ void mctSMBhub_Init(u32 node)
 void mctGet_DIMMAddr(struct DCTStatStruc *pDCTstat, u32 node)
 {
 	int j;
-	struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 	struct mem_controller *ctrl = &( sysinfo->ctrl[node] );

 	for(j=0;j<DIMM_SOCKETS;j++) {
--- a/src/northbridge/amd/amdfam10/reset_test.c
+++ b/src/northbridge/amd/amdfam10/reset_test.c
@@ -43,7 +43,7 @@ static u32 cpu_init_detected(u8 nodeid)
 static u32 bios_reset_detected(void)
 {
 	u32 htic;
-	htic = pci_io_read_config32(PCI_DEV(CBB, CDB, 0), HT_INIT_CONTROL);
+	htic = pci_io_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), HT_INIT_CONTROL);

 	return (htic & HTIC_ColdR_Detect) && !(htic & HTIC_BIOSR_Detect);
 }
@@ -51,7 +51,7 @@ static u32 bios_reset_detected(void)
 static u32 cold_reset_detected(void)
 {
 	u32 htic;
-	htic = pci_io_read_config32(PCI_DEV(CBB, CDB, 0), HT_INIT_CONTROL);
+	htic = pci_io_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), HT_INIT_CONTROL);

 	return !(htic & HTIC_ColdR_Detect);
 }
@@ -59,7 +59,7 @@ static u32 cold_reset_detected(void)
 static u32 other_reset_detected(void)	// other warm reset not started by BIOS
 {
 	u32 htic;
-	htic = pci_io_read_config32(PCI_DEV(CBB, CDB, 0), HT_INIT_CONTROL);
+	htic = pci_io_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), HT_INIT_CONTROL);

 	return (htic & HTIC_ColdR_Detect) && (htic & HTIC_BIOSR_Detect);
 }
@@ -91,7 +91,7 @@ static void set_bios_reset(void)
 	device_t dev;
 	int i;

-	nodes = ((pci_read_config32(PCI_DEV(CBB, CDB, 0), 0x60) >> 4) & 7) + 1;
+	nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;

 	for(i = 0; i < nodes; i++) {
 		dev = NODE_PCI(i,0);
@@ -115,7 +115,7 @@ static u8 node_link_to_bus(u8 node, u8 link) // node are 6 bit, and link three b

 	for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
 		u32 config_map;
-		config_map = pci_io_read_config32(PCI_DEV(CBB, CDB, 1), reg);
+		config_map = pci_io_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 1), reg);
 		if ((config_map & 3) != 3) {
 			continue;
 		}
@@ -126,7 +126,7 @@ static u8 node_link_to_bus(u8 node, u8 link) // node are 6 bit, and link three b
 		}
 	}

-#if EXT_CONF_SUPPORT == 1
+#if CONFIG_EXT_CONF_SUPPORT == 1
 	// let's check that in extend space
 	// use the nodeid extend space to find out the bus for the linkn
 	u32 tempreg;
@@ -157,8 +157,8 @@ static u8 node_link_to_bus(u8 node, u8 link) // node are 6 bit, and link three b
 static u32 get_sblk(void)
 {
 	u32 reg;
-	/* read PCI_DEV(CBB,CDB,0) 0x64 bit [8:9] to find out SbLink m */
-	reg = pci_io_read_config32(PCI_DEV(CBB, CDB, 0), 0x64);
+	/* read PCI_DEV(CONFIG_CBB,CONFIG_CDB,0) 0x64 bit [8:9] to find out SbLink m */
+	reg = pci_io_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x64);
 	return ((reg>>8) & 3) ;
 }

--- a/src/northbridge/amd/amdfam10/resourcemap.c
+++ b/src/northbridge/amd/amdfam10/resourcemap.c
@@ -49,14 +49,14 @@ static void setup_default_resource_map(void)
 		 *	   This field defines the upper address bits of a 40 bit
 		 *	   address that define the end of the DRAM region.
 		 */
-		PCI_ADDR(CBB, CDB, 1, 0x44), 0x0000f8f8, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
-		PCI_ADDR(CBB, CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
-		PCI_ADDR(CBB, CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
-		PCI_ADDR(CBB, CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
-		PCI_ADDR(CBB, CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
-		PCI_ADDR(CBB, CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
-		PCI_ADDR(CBB, CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
 		/* DRAM Base i Registers
 		 * F1:0x40 i = 0
 		 * F1:0x48 i = 1
@@ -87,14 +87,14 @@ static void setup_default_resource_map(void)
 		 *	   This field defines the upper address bits of a 40-bit
 		 *	   address that define the start of the DRAM region.
 		 */
-		PCI_ADDR(CBB, CDB, 1, 0x40), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000,

 		/* Memory-Mapped I/O Limit i Registers
 		 * F1:0x84 i = 0
@@ -129,14 +129,14 @@ static void setup_default_resource_map(void)
 		 *	   address that defines the end of a memory-mapped
 		 * 	   I/O region n
 		 */
-		PCI_ADDR(CBB, CDB, 1, 0x84), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x8C), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x94), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x9C), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xA4), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xAC), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xB4), 0x00000048, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00,

 		/* Memory-Mapped I/O Base i Registers
 		 * F1:0x80 i = 0
@@ -165,14 +165,14 @@ static void setup_default_resource_map(void)
 		 * 	   address that defines the start of memory-mapped
 		 *	   I/O region i
 		 */
-		PCI_ADDR(CBB, CDB, 1, 0x80), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x88), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x90), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0x98), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xA0), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xA8), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xB0), 0x000000f0, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,

 		/* PCI I/O Limit i Registers
 		 * F1:0xC4 i = 0
@@ -199,10 +199,10 @@ static void setup_default_resource_map(void)
 		 *	   This field defines the end of PCI I/O region n
 		 * [31:25] Reserved
 		 */
-		PCI_ADDR(CBB, CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
-		PCI_ADDR(CBB, CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,

 		/* PCI I/O Base i Registers
 		 * F1:0xC0 i = 0
@@ -231,10 +231,10 @@ static void setup_default_resource_map(void)
 		 *	   This field defines the start of PCI I/O region n
 		 * [31:25] Reserved
 		 */
-		PCI_ADDR(CBB, CDB, 1, 0xC0), 0xFE000FCC, 0x00000003,
-		PCI_ADDR(CBB, CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,

 		/* Config Base and Limit i Registers
 		 * F1:0xE0 i = 0
@@ -274,10 +274,10 @@ static void setup_default_resource_map(void)
 		 *	   This field defines the highest bus number in
 		 *	   configuration regin i
 		 */
-		PCI_ADDR(CBB, CDB, 1, 0xE0), 0x0000FC88, 0xff000003,
-		PCI_ADDR(CBB, CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
-		PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0xff000003,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
 	};

 	u32 max;
--- a/src/northbridge/amd/amdht/ht_wrapper.c
+++ b/src/northbridge/amd/amdht/ht_wrapper.c
@@ -66,7 +66,7 @@ static  u32 get_nodes(void)
 	device_t dev;
 	u32 nodes;

-	dev = PCI_DEV(CBB, CDB, 0);
+	dev = PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0);
 	nodes = ((pci_read_config32(dev, 0x60)>>4) & 7) ;
 #if CONFIG_MAX_PHYSICAL_CPUS > 8
 	nodes += (((pci_read_config32(dev, 0x160)>>4) & 7)<<3);
@@ -116,9 +116,9 @@ void AMD_CB_EventNotify (u8 evtClass, u16 event, u8 *pEventData0)
 */
 BOOL AMD_CB_ManualBUIDSwapList (u8 node, u16 link, u8 **List)
 {
-	const u8 swaplist[] = { 0xFF, HT_CHAIN_UNITID_BASE, HT_CHAIN_END_UNITID_BASE, 0xFF };
+	const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF };
 	/* If the BUID was adjusted in early_ht we need to do the manual override */
-	if ((HT_CHAIN_UNITID_BASE != 0) && (HT_CHAIN_END_UNITID_BASE != 0)) {
+	if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) {
 		printk_debug("AMD_CB_ManualBUIDSwapList()\n");
 		if ((node == 0) && (link == 0)) {	/* BSP SB link */
 			*List = swaplist;
--- a/src/northbridge/amd/amdk8/Config.lb
+++ b/src/northbridge/amd/amdk8/Config.lb
@@ -1,22 +1,22 @@
-uses AGP_APERTURE_SIZE
-uses HAVE_ACPI_TABLES
-uses HAVE_HIGH_TABLES
-uses K8_REV_F_SUPPORT
+uses CONFIG_AGP_APERTURE_SIZE
+uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_HAVE_HIGH_TABLES
+uses CONFIG_K8_REV_F_SUPPORT

-default AGP_APERTURE_SIZE=0x4000000
-default HAVE_HIGH_TABLES=1
+default CONFIG_AGP_APERTURE_SIZE=0x4000000
+default CONFIG_HAVE_HIGH_TABLES=1

 config chip.h

 driver northbridge.o
 driver misc_control.o

-if K8_REV_F_SUPPORT
+if CONFIG_K8_REV_F_SUPPORT

 makerule raminit_test
 	depends "$(TOP)/src/northbridge/amd/amdk8/raminit_test.c"
 	depends "$(TOP)/src/northbridge/amd/amdk8/raminit_f.c"
-	action "$(HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) -Wno-unused-function -I$(TOP)/src/include -g  $< -o $@"
+	action "$(CONFIG_HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) -Wno-unused-function -I$(TOP)/src/include -g  $< -o $@"
 end

 else
@@ -24,13 +24,13 @@ else
 makerule raminit_test
 	depends "$(TOP)/src/northbridge/amd/amdk8/raminit_test.c"
 	depends "$(TOP)/src/northbridge/amd/amdk8/raminit.c"
-	action "$(HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) -Wno-unused-function -I$(TOP)/src/include -g  $< -o $@"
+	action "$(CONFIG_HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) -Wno-unused-function -I$(TOP)/src/include -g  $< -o $@"
 end

 end


-if HAVE_ACPI_TABLES
+if CONFIG_HAVE_ACPI_TABLES
 	object amdk8_acpi.o
 end

--- a/src/northbridge/amd/amdk8/amdk8.h
+++ b/src/northbridge/amd/amdk8/amdk8.h
@@ -2,7 +2,7 @@

 #define AMDK8_H

-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
        #include "amdk8_f.h"
 #else
        #include "amdk8_pre_f.h"
--- a/src/northbridge/amd/amdk8/coherent_ht.c
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -88,8 +88,8 @@
 	#define TRY_HIGH_FIRST 0
 #endif

-#ifndef K8_HT_FREQ_1G_SUPPORT
-	#define K8_HT_FREQ_1G_SUPPORT 0
+#ifndef CONFIG_K8_HT_FREQ_1G_SUPPORT
+	#define CONFIG_K8_HT_FREQ_1G_SUPPORT 0
 #endif

 #ifndef K8_HT_CHECK_PENDING_LINK
@@ -104,8 +104,8 @@
 	#define CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED 0
 #endif

-#ifndef ENABLE_APIC_EXT_ID
-	#define ENABLE_APIC_EXT_ID 0
+#ifndef CONFIG_ENABLE_APIC_EXT_ID
+	#define CONFIG_ENABLE_APIC_EXT_ID 0
 #endif


@@ -161,7 +161,7 @@ static void disable_probes(void)

 static void enable_apic_ext_id(u8 node)
 {
-#if ENABLE_APIC_EXT_ID==1
+#if CONFIG_ENABLE_APIC_EXT_ID==1
 #warning "FIXME Is the right place to enable apic ext id here?"

      u32 val;
@@ -284,8 +284,8 @@ static uint16_t read_freq_cap(device_t dev, uint8_t pos)
 	freq_cap = pci_read_config16(dev, pos);
 	freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */

-#if K8_HT_FREQ_1G_SUPPORT == 1
-    #if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_HT_FREQ_1G_SUPPORT == 1
+    #if CONFIG_K8_REV_F_SUPPORT == 0
 	if (!is_cpu_pre_e0())
    #endif
 	{
@@ -1591,13 +1591,13 @@ static unsigned verify_dualcore(unsigned nodes)
 static void coherent_ht_finalize(unsigned nodes)
 {
 	unsigned node;
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 	int rev_a0;
 #endif
 #if CONFIG_LOGICAL_CPUS==1
 	unsigned total_cpus;

-	if ((!HAVE_OPTION_TABLE) ||
+	if ((!CONFIG_HAVE_OPTION_TABLE) ||
 	    read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) == 0) { /* dual_core */
 		total_cpus = verify_dualcore(nodes);
 	}
@@ -1613,7 +1613,7 @@ static void coherent_ht_finalize(unsigned nodes)
 	 */

 	print_spew("coherent_ht_finalize\r\n");
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 	rev_a0 = is_cpu_rev_a0();
 #endif
 	for (node = 0; node < nodes; node++) {
@@ -1644,7 +1644,7 @@ static void coherent_ht_finalize(unsigned nodes)
 			(3 << HTTC_HI_PRI_BYP_CNT_SHIFT);
 		pci_write_config32(dev, HT_TRANSACTION_CONTROL, val);

-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 		if (rev_a0) {
 			pci_write_config32(dev, 0x94, 0);
 			pci_write_config32(dev, 0xb4, 0);
@@ -1664,7 +1664,7 @@ static int apply_cpu_errata_fixes(unsigned nodes)
 		device_t dev;
 		uint32_t cmd;
 		dev = NODE_MC(node);
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 		if (is_cpu_pre_c0()) {

 			/* Errata 66
--- a/src/northbridge/amd/amdk8/debug.c
+++ b/src/northbridge/amd/amdk8/debug.c
@@ -91,7 +91,7 @@ static void dump_pci_device(unsigned dev)
 	print_debug("\r\n");
 }

-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
 static uint32_t pci_read_config32_index_wait(device_t dev, uint32_t index_reg, uint32_t index);
 static void dump_pci_device_index_wait(unsigned dev, uint32_t index_reg)
 {
--- a/src/northbridge/amd/amdk8/early_ht.c
+++ b/src/northbridge/amd/amdk8/early_ht.c
@@ -4,8 +4,8 @@
 // only for sb ht chain
 static void enumerate_ht_chain(void)
 {
-#if HT_CHAIN_UNITID_BASE != 0
-/* HT_CHAIN_UNITID_BASE could be 0 (only one ht device in the ht chain), if so, don't need to go through the chain  */
+#if CONFIG_HT_CHAIN_UNITID_BASE != 0
+/* CONFIG_HT_CHAIN_UNITID_BASE could be 0 (only one ht device in the ht chain), if so, don't need to go through the chain  */

 	/* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
 	 * On most boards this just happens.  If a cpu has multiple
@@ -14,8 +14,8 @@ static void enumerate_ht_chain(void)
 	 */
 	unsigned next_unitid, last_unitid;
 	device_t dev;
-#if HT_CHAIN_END_UNITID_BASE != 0x20
-	//let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
+	//let't record the device of last ht device, So we can set the Unitid to CONFIG_HT_CHAIN_END_UNITID_BASE
 	unsigned real_last_unitid;
 	uint8_t real_last_pos;
 	int ht_dev_num = 0; // except host_bridge
@@ -23,7 +23,7 @@ static void enumerate_ht_chain(void)
 #endif

 	dev = PCI_DEV(0,0,0);
-	next_unitid = HT_CHAIN_UNITID_BASE;
+	next_unitid = CONFIG_HT_CHAIN_UNITID_BASE;
 	do {
 		uint32_t id;
 		uint8_t hdr_type, pos;
@@ -63,10 +63,10 @@ static void enumerate_ht_chain(void)
 					unsigned ctrl, ctrl_off;
 					device_t devx;

-#if HT_CHAIN_END_UNITID_BASE != 0x20
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
 					if(next_unitid>=0x18) { // don't get mask out by k8, at this time BSP, RT is not enabled, it will response from 0x18,0--0x1f.
 						if(!end_used) {
-							next_unitid = HT_CHAIN_END_UNITID_BASE;
+							next_unitid = CONFIG_HT_CHAIN_END_UNITID_BASE;
 							end_used = 1;
 						} else {
 							goto out;
@@ -126,13 +126,13 @@ static void enumerate_ht_chain(void)
 out:
 	;

-#if HT_CHAIN_END_UNITID_BASE != 0x20
-	if((ht_dev_num>1) && (real_last_unitid != HT_CHAIN_END_UNITID_BASE) && !end_used) {
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
+	if((ht_dev_num>1) && (real_last_unitid != CONFIG_HT_CHAIN_END_UNITID_BASE) && !end_used) {
 		uint16_t flags;
 		dev = PCI_DEV(0,real_last_unitid, 0);
 		flags = pci_read_config16(dev, real_last_pos + PCI_CAP_FLAGS);
 	        flags &= ~0x1f;
-	        flags |= HT_CHAIN_END_UNITID_BASE & 0x1f;
+	        flags |= CONFIG_HT_CHAIN_END_UNITID_BASE & 0x1f;
 		pci_write_config16(dev, real_last_pos + PCI_CAP_FLAGS, flags);
 	}
 #endif
--- a/src/northbridge/amd/amdk8/exit_from_self.c
+++ b/src/northbridge/amd/amdk8/exit_from_self.c
@@ -156,7 +156,7 @@ void exit_from_self(int controllers, const struct mem_controller *ctrl,
 		printk_debug(" done\n");
 	}

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 	/* init hw mem hole here */
 	/* DramHoleValid bit only can be set after MemClrStatus is set by Hardware */
 	set_hw_mem_hole(controllers, ctrl);
--- a/src/northbridge/amd/amdk8/get_sblk_pci1234.c
+++ b/src/northbridge/amd/amdk8/get_sblk_pci1234.c
@@ -176,7 +176,7 @@ unsigned node_link_to_bus(unsigned node, unsigned link)
 * Just put all the possible HT Node/link to the list tp pci1234[] in
 * src/mainboard/<vendor>/<mainboard>get_bus_conf.c
 *
- * Also don't forget to increase the ACPI_SSDTX_NUM etc (FIXME what else) if
+ * Also don't forget to increase the CONFIG_ACPI_SSDTX_NUM etc (FIXME what else) if
 * you have too many SSDTs
 *
 * What about co-processor in socket 1 on a 2 way system? Or socket 2 and
--- a/src/northbridge/amd/amdk8/incoherent_ht.c
+++ b/src/northbridge/amd/amdk8/incoherent_ht.c
@@ -7,8 +7,8 @@
 #include <device/pci_ids.h>
 #include <device/hypertransport_def.h>

-#ifndef K8_HT_FREQ_1G_SUPPORT
-	#define K8_HT_FREQ_1G_SUPPORT 0
+#ifndef CONFIG_K8_HT_FREQ_1G_SUPPORT
+	#define CONFIG_K8_HT_FREQ_1G_SUPPORT 0
 #endif

 #ifndef RAMINIT_SYSINFO
@@ -85,14 +85,14 @@ static void ht_collapse_previous_enumeration(uint8_t bus, unsigned offset_unitid
 	device_t dev;

 	//actually, only for one HT device HT chain, and unitid is 0
-#if HT_CHAIN_UNITID_BASE == 0
+#if CONFIG_HT_CHAIN_UNITID_BASE == 0
 	if(offset_unitid) {
 		return;
 	}
 #endif

 	/* Check if is already collapsed */
-	if((!offset_unitid) || (offset_unitid && (!((HT_CHAIN_END_UNITID_BASE == 0) && (HT_CHAIN_END_UNITID_BASE <HT_CHAIN_UNITID_BASE))))) {
+	if((!offset_unitid) || (offset_unitid && (!((CONFIG_HT_CHAIN_END_UNITID_BASE == 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE <CONFIG_HT_CHAIN_UNITID_BASE))))) {
 		uint32_t id;
 		dev = PCI_DEV(bus, 0, 0);
 		id = pci_read_config32(dev, PCI_VENDOR_ID);
@@ -154,8 +154,8 @@ static uint16_t ht_read_freq_cap(device_t dev, uint8_t pos)

 	/* AMD K8 Unsupported 1Ghz? */
 	if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) {
-	#if K8_HT_FREQ_1G_SUPPORT == 1
-		#if K8_REV_F_SUPPORT == 0
+	#if CONFIG_K8_HT_FREQ_1G_SUPPORT == 1
+		#if CONFIG_K8_REV_F_SUPPORT == 0
 		if (is_cpu_pre_e0()) {  // only E0 later support 1GHz
 			freq_cap &= ~(1 << HT_FREQ_1000Mhz);
 		}
@@ -303,7 +303,7 @@ static int ht_optimize_link(
 	return needs_reset;
 }

-#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
+#if (CONFIG_USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)

 #if RAMINIT_SYSINFO == 1
 static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid, struct sys_info *sysinfo);
@@ -425,7 +425,7 @@ static void ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned o
 static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned offset_unitid)
 #endif
 {
-	//even HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link
+	//even CONFIG_HT_CHAIN_UNITID_BASE == 0, we still can go through this function, because of end_of_chain check, also We need it to optimize link

 	uint8_t next_unitid, last_unitid;
 	unsigned uoffs;
@@ -434,8 +434,8 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of
 	int reset_needed = 0;
 #endif

-#if HT_CHAIN_END_UNITID_BASE != 0x20
-	//let't record the device of last ht device, So we can set the Unitid to HT_CHAIN_END_UNITID_BASE
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
+	//let't record the device of last ht device, So we can set the Unitid to CONFIG_HT_CHAIN_END_UNITID_BASE
 	unsigned real_last_unitid;
 	uint8_t real_last_pos;
 	int ht_dev_num = 0;
@@ -443,7 +443,7 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of
 #endif

 	uoffs = PCI_HT_HOST_OFFS;
-	next_unitid = (offset_unitid) ? HT_CHAIN_UNITID_BASE:1;
+	next_unitid = (offset_unitid) ? CONFIG_HT_CHAIN_UNITID_BASE:1;

 	do {
 		uint32_t id;
@@ -500,11 +500,11 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of
 		}


-#if HT_CHAIN_END_UNITID_BASE != 0x20
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
 		if(offset_unitid) {
 			if(next_unitid>= (bus ? 0x20:0x18) ) {
 				if(!end_used) {
-					next_unitid = HT_CHAIN_END_UNITID_BASE;
+					next_unitid = CONFIG_HT_CHAIN_END_UNITID_BASE;
 					end_used = 1;
 				} else {
 					goto out;
@@ -560,18 +560,18 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus, unsigned of

 	} while (last_unitid != next_unitid );

-#if HT_CHAIN_END_UNITID_BASE != 0x20
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
 out:
 #endif
 end_of_chain: ;

-#if HT_CHAIN_END_UNITID_BASE != 0x20
-	if(offset_unitid && (ht_dev_num>1) && (real_last_unitid != HT_CHAIN_END_UNITID_BASE) && !end_used ) {
+#if CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20
+	if(offset_unitid && (ht_dev_num>1) && (real_last_unitid != CONFIG_HT_CHAIN_END_UNITID_BASE) && !end_used ) {
 		uint16_t flags;
 		int i;
 		flags = pci_read_config16(PCI_DEV(bus,real_last_unitid,0), real_last_pos + PCI_CAP_FLAGS);
 		flags &= ~0x1f;
-		flags |= HT_CHAIN_END_UNITID_BASE & 0x1f;
+		flags |= CONFIG_HT_CHAIN_END_UNITID_BASE & 0x1f;
 		pci_write_config16(PCI_DEV(bus, real_last_unitid, 0), real_last_pos + PCI_CAP_FLAGS, flags);

 		#if RAMINIT_SYSINFO == 1
@@ -580,11 +580,11 @@ end_of_chain: ;
 		{
 			struct link_pair_st *link_pair = &sysinfo->link_pair[i];
 			if(link_pair->udev == PCI_DEV(bus, real_last_unitid, 0)) {
-				link_pair->udev = PCI_DEV(bus, HT_CHAIN_END_UNITID_BASE, 0);
+				link_pair->udev = PCI_DEV(bus, CONFIG_HT_CHAIN_END_UNITID_BASE, 0);
 				continue;
 			}
 			if(link_pair->dev == PCI_DEV(bus, real_last_unitid, 0)) {
-				link_pair->dev = PCI_DEV(bus, HT_CHAIN_END_UNITID_BASE, 0);
+				link_pair->dev = PCI_DEV(bus, CONFIG_HT_CHAIN_END_UNITID_BASE, 0);
 			}
 		}
 		#endif
@@ -605,7 +605,7 @@ static int ht_setup_chain(device_t udev, unsigned upos)
 #endif
 {
 	unsigned offset_unitid = 0;
-#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
+#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
 	offset_unitid = 1;
 #endif

@@ -618,7 +618,7 @@ static int ht_setup_chain(device_t udev, unsigned upos)
 	/* Make certain the HT bus is not enumerated */
 	ht_collapse_previous_enumeration(0, 0);

-#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
+#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
 	offset_unitid = 1;
 #endif

@@ -666,11 +666,11 @@ static int optimize_link_read_pointers_chain(uint8_t ht_c_num)
 		uint8_t val;
 		unsigned devn = 1;

-	#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
-		#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+	#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+		#if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
 		if(i==0) // to check if it is sb ht chain
 		#endif
-			devn = HT_CHAIN_UNITID_BASE;
+			devn = CONFIG_HT_CHAIN_UNITID_BASE;
 	#endif

 		reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
@@ -781,7 +781,7 @@ static int ht_setup_chains(uint8_t ht_c_num)
 		unsigned regpos;
 		uint32_t dword;
 		uint8_t busn;
-		#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
+		#if (CONFIG_USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
 		unsigned bus;
 		#endif
 		unsigned offset_unitid = 0;
@@ -799,8 +799,8 @@ static int ht_setup_chains(uint8_t ht_c_num)
 		pci_write_config32( PCI_DEV(0, devpos,0), regpos , dword);


-	#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
-		#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+	#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+		#if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
 		if(i==0) // to check if it is sb ht chain
 		#endif
 			offset_unitid = 1;
@@ -818,7 +818,7 @@ static int ht_setup_chains(uint8_t ht_c_num)
 		reset_needed |= ht_setup_chainx(udev,upos,busn, offset_unitid); //all not
 #endif

-		#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
+		#if (CONFIG_USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
 		/* You can use use this in romcc, because there is function call in romcc, recursive will kill you */
 		bus = busn; // we need 32 bit
 #if RAMINIT_SYSINFO == 1
--- a/src/northbridge/amd/amdk8/misc_control.c
+++ b/src/northbridge/amd/amdk8/misc_control.c
@@ -53,7 +53,7 @@ static void mcf3_read_resources(device_t dev)
 	if (iommu) {
 		/* Add a Gart apeture resource */
 		resource = new_resource(dev, 0x94);
-		resource->size = iommu?AGP_APERTURE_SIZE:1;
+		resource->size = iommu?CONFIG_AGP_APERTURE_SIZE:1;
 		resource->align = log2(resource->size);
 		resource->gran  = log2(resource->size);
 		resource->limit = 0xffffffff; /* 4G */
@@ -121,7 +121,7 @@ static void misc_control_init(struct device *dev)
 	cmd = pci_read_config32(dev, 0x44);
 	cmd |= (1<<6) | (1<<25);
 	pci_write_config32(dev, 0x44, cmd );
-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 	if (is_cpu_pre_c0()) {

 		/* Errata 58
--- a/src/northbridge/amd/amdk8/northbridge.c
+++ b/src/northbridge/amd/amdk8/northbridge.c
@@ -155,12 +155,12 @@ static unsigned int amdk8_scan_chain(device_t dev, unsigned nodeid, unsigned lin
 		 * We have no idea how many busses are behind this bridge yet,
 		 * so we set the subordinate bus number to 0xff for the moment.
 		 */
-#if SB_HT_CHAIN_ON_BUS0 > 0
+#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0
 		// first chain will on bus 0
 		if((nodeid == 0) && (sblink==link)) { // actually max is 0 here
 			min_bus = max;
 		}
-	#if SB_HT_CHAIN_ON_BUS0 > 1
+	#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 1
 		// second chain will be on 0x40, third 0x80, forth 0xc0
 		else {
 			min_bus = ((max>>6) + 1) * 0x40;
@@ -257,8 +257,8 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)

 	if(nodeid==0) {
 		sblink = (pci_read_config32(dev, 0x64)>>8) & 3;
-#if SB_HT_CHAIN_ON_BUS0 > 0
-	#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
+#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0
+	#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
 		offset_unitid = 1;
 	#endif
 		max = amdk8_scan_chain(dev, nodeid, sblink, sblink, max, offset_unitid ); // do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0
@@ -266,12 +266,12 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
 	}

 	for(link = 0; link < dev->links; link++) {
-#if SB_HT_CHAIN_ON_BUS0 > 0
+#if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0
 		if( (nodeid == 0) && (sblink == link) ) continue; //already done
 #endif
 		offset_unitid = 0;
-		#if ((HT_CHAIN_UNITID_BASE != 1) || (HT_CHAIN_END_UNITID_BASE != 0x20))
-			#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
+		#if ((CONFIG_HT_CHAIN_UNITID_BASE != 1) || (CONFIG_HT_CHAIN_END_UNITID_BASE != 0x20))
+			#if CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1
 			if((nodeid == 0) && (sblink == link))
 			#endif
 				offset_unitid = 1;
@@ -743,7 +743,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 #define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH)
 #endif

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0

 struct hw_mem_hole_info {
 	unsigned hole_startk;
@@ -755,7 +755,7 @@ static struct hw_mem_hole_info get_hw_mem_hole_info(void)
 		struct hw_mem_hole_info mem_hole;
 		int i;

-		mem_hole.hole_startk = HW_MEM_HOLE_SIZEK;
+		mem_hole.hole_startk = CONFIG_HW_MEM_HOLE_SIZEK;
 		mem_hole.node_id = -1;

 		for (i = 0; i < FX_DEVS; i++) {
@@ -893,7 +893,7 @@ static uint32_t hoist_memory(unsigned long hole_startk, int i)
 }
 #endif

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -907,7 +907,7 @@ static void pci_domain_set_resources(device_t dev)
 	unsigned long mmio_basek;
 	uint32_t pci_tolm;
 	int i, idx;
-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 	struct hw_mem_hole_info mem_hole;
 	unsigned reset_memhole = 1;
 #endif
@@ -991,12 +991,12 @@ static void pci_domain_set_resources(device_t dev)
 	mmio_basek &= ~((64*1024) - 1);
 #endif

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 	/* if the hw mem hole is already set in raminit stage, here we will compare mmio_basek and hole_basek
 	 * if mmio_basek is bigger that hole_basek and will use hole_basek as mmio_basek and we don't need to reset hole.
 	 * otherwise We reset the hole to the mmio_basek
 	 */
-	#if K8_REV_F_SUPPORT == 0
+	#if CONFIG_K8_REV_F_SUPPORT == 0
 		if (!is_cpu_pre_e0()) {
 	#endif

@@ -1010,13 +1010,13 @@ static void pci_domain_set_resources(device_t dev)
 		//mmio_basek = 3*1024*1024; // for debug to meet boundary

 		if(reset_memhole) {
-			if(mem_hole.node_id!=-1) { // We need to select HW_MEM_HOLE_SIZEK for raminit, it can not make hole_startk to some basek too....!
+			if(mem_hole.node_id!=-1) { // We need to select CONFIG_HW_MEM_HOLE_SIZEK for raminit, it can not make hole_startk to some basek too....!
 			       // We need to reset our Mem Hole, because We want more big HOLE than we already set
 			       //Before that We need to disable mem hole at first, becase memhole could already be set on i+1 instead
 				disable_hoist_memory(mem_hole.hole_startk, mem_hole.node_id);
 			}

-		#if HW_MEM_HOLE_SIZE_AUTO_INC == 1
+		#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1
 			//We need to double check if the mmio_basek is valid for hole setting, if it is equal to basek, we need to decrease it some
 			uint32_t basek_pri;
 			for (i = 0; i < FX_DEVS; i++) {
@@ -1037,7 +1037,7 @@ static void pci_domain_set_resources(device_t dev)
 		#endif
 		}

-#if K8_REV_F_SUPPORT == 0
+#if CONFIG_K8_REV_F_SUPPORT == 0
 	} // is_cpu_pre_e0
 #endif

@@ -1077,7 +1077,7 @@ static void pci_domain_set_resources(device_t dev)
 					ram_resource(dev, (idx | i), basek, pre_sizek);
 					idx += 0x10;
 					sizek -= pre_sizek;
-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 					if (i==0 && high_tables_base==0) {
 					/* Leave some space for ACPI, PIRQ and MP tables */
 						high_tables_base = (mmio_basek - HIGH_TABLES_SIZE) * 1024;
@@ -1087,9 +1087,9 @@ static void pci_domain_set_resources(device_t dev)
 					}
 #endif
 				}
-				#if HW_MEM_HOLE_SIZEK != 0
+				#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 				if(reset_memhole)
-					#if K8_REV_F_SUPPORT == 0
+					#if CONFIG_K8_REV_F_SUPPORT == 0
 					if(!is_cpu_pre_e0() )
 					#endif
 		       				 sizek += hoist_memory(mmio_basek,i);
@@ -1111,7 +1111,7 @@ static void pci_domain_set_resources(device_t dev)
 		if (sizek)
 			ram_resource(dev, (idx | i), basek, sizek);
 		idx += 0x10;
-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		printk_debug("%d: mmio_basek=%08lx, basek=%08x, limitk=%08x\n",
 			     i, mmio_basek, basek, limitk);
 		if (i==0 && high_tables_base==0) {
@@ -1211,7 +1211,7 @@ static unsigned int cpu_bus_scan(device_t dev, unsigned int max)
 		sysconf.enabled_apic_ext_id = 1;
 		if(bsp_apicid == 0) {
 			/* bsp apic id is not changed */
-			sysconf.apicid_offset = APIC_ID_OFFSET;
+			sysconf.apicid_offset = CONFIG_APIC_ID_OFFSET;
 		} else
 		{
 			sysconf.lift_bsp_apicid = 1;
@@ -1263,7 +1263,7 @@ static unsigned int cpu_bus_scan(device_t dev, unsigned int max)
 				// That is the typical case

 				if(j == 0 ){
-				       #if K8_REV_F_SUPPORT == 0
+				       #if CONFIG_K8_REV_F_SUPPORT == 0
 		 		       	e0_later_single_core = is_e0_later_in_bsp(i);  // single core
 				       #else
 				       	e0_later_single_core = is_cpu_f0_in_bsp(i);  // We can read cpuid(1) from Func3
--- a/src/northbridge/amd/amdk8/raminit.c
+++ b/src/northbridge/amd/amdk8/raminit.c
@@ -553,7 +553,7 @@ static void hw_enable_ecc(const struct mem_controller *ctrl)
 	if (nbcap & NBCAP_ECC) {
 		dcl |= DCL_DimmEccEn;
 	}
-	if (HAVE_OPTION_TABLE &&
+	if (CONFIG_HAVE_OPTION_TABLE &&
 	    read_option(CMOS_VSTART_ECC_memory, CMOS_VLEN_ECC_memory, 1) == 0) {
 		dcl &= ~DCL_DimmEccEn;
 	}
@@ -867,7 +867,7 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk)
 	 * so I can see my rom chip and other I/O devices.
 	 */
 	if (tom_k >= 0x003f0000) {
-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 		if (hole_startk != 0) {
 			tom_k = hole_startk;
 		} else
@@ -1104,7 +1104,7 @@ static void order_dimms(const struct mem_controller *ctrl)
 {
 	unsigned long tom_k, base_k;

-	if ((!HAVE_OPTION_TABLE) ||
+	if ((!CONFIG_HAVE_OPTION_TABLE) ||
 	    read_option(CMOS_VSTART_interleave_chip_selects, CMOS_VLEN_interleave_chip_selects, 1) != 0) {
 		tom_k = interleave_chip_selects(ctrl);
 	} else {
@@ -1408,7 +1408,7 @@ static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller *
 	min_cycle_time = min_cycle_times[(value >> NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK];
 	bios_cycle_time = min_cycle_times[
 		read_option(CMOS_VSTART_max_mem_clock, CMOS_VLEN_max_mem_clock, 0)];
-	if (HAVE_OPTION_TABLE && bios_cycle_time > min_cycle_time) {
+	if (CONFIG_HAVE_OPTION_TABLE && bios_cycle_time > min_cycle_time) {
 		min_cycle_time = bios_cycle_time;
 	}
 	min_latency = 2;
@@ -2111,7 +2111,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
 	return;
 }

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 static uint32_t hoist_memory(int controllers, const struct mem_controller *ctrl,unsigned hole_startk, int i)
 {
 	int ii;
@@ -2170,10 +2170,10 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
 	uint32_t hole_startk;
 	int i;

-	hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK;
+	hole_startk = 4*1024*1024 - CONFIG_HW_MEM_HOLE_SIZEK;

 	printk_spew("Handling memory hole at 0x%08x (default)\n", hole_startk);
-#if HW_MEM_HOLE_SIZE_AUTO_INC == 1
+#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1
 	/* We need to double check if hole_startk is valid.
 	 * If it is equal to the dram base address in K (base_k),
 	 * we need to decrease it.
@@ -2328,7 +2328,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
 		printk_debug(" done\n");
 	}

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 	 // init hw mem hole here
 	/* DramHoleValid bit only can be set after MemClrStatus is set by Hardware */
 	if (!is_cpu_pre_e0())
--- a/src/northbridge/amd/amdk8/raminit_f.c
+++ b/src/northbridge/amd/amdk8/raminit_f.c
@@ -882,11 +882,11 @@ static void set_dimm_size(const struct mem_controller *ctrl,
 	if (base0) {
 		uint32_t dword;
 		uint32_t ClkDis0;
-#if CPU_SOCKET_TYPE == 0x10 /* L1 */
+#if CONFIG_CPU_SOCKET_TYPE == 0x10 /* L1 */
 		ClkDis0 = DTL_MemClkDis0;
-#elif CPU_SOCKET_TYPE == 0x11 /* AM2 */
+#elif CONFIG_CPU_SOCKET_TYPE == 0x11 /* AM2 */
 		ClkDis0 = DTL_MemClkDis0_AM2;
-#elif CPU_SOCKET_TYPE == 0x12	/* S1G1 */
+#elif CONFIG_CPU_SOCKET_TYPE == 0x12	/* S1G1 */
 		ClkDis0 = DTL_MemClkDis0_S1g1;
 #endif

@@ -1066,7 +1066,7 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk)
 	 * so I can see my rom chip and other I/O devices.
 	 */
 	if (tom_k >= 0x003f0000) {
-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 		if (hole_startk != 0) {
 			tom_k = hole_startk;
 		} else
@@ -1452,7 +1452,7 @@ static long spd_enable_2channels(const struct mem_controller *ctrl, struct mem_i
 	u8 common_cl;

 /* S1G1 and AM2 sockets are Mod64BitMux capable. */
-#if CPU_SOCKET_TYPE == 0x11 || CPU_SOCKET_TYPE == 0x12
+#if CONFIG_CPU_SOCKET_TYPE == 0x11 || CONFIG_CPU_SOCKET_TYPE == 0x12
 	u8 mux_cap = 1;
 #else
 	u8 mux_cap = 0;
@@ -2341,7 +2341,7 @@ static void set_DramTerm(const struct mem_controller *ctrl,
 	}


-#if DIMM_SUPPORT == 0x0204
+#if CONFIG_DIMM_SUPPORT == 0x0204
 	odt = 0x2;		/* 150 ohms */
 #endif

@@ -2512,7 +2512,7 @@ static void set_misc_timing(const struct mem_controller *ctrl, struct mem_info *

 	long dimm_mask = meminfo->dimm_mask & 0x0f;

-#if DIMM_SUPPORT==0x0104   /* DDR2 and REG */
+#if CONFIG_DIMM_SUPPORT==0x0104   /* DDR2 and REG */
 	/* for REG DIMM */
 	dword = 0x00111222;
 	dwordx = 0x002f0000;
@@ -2536,7 +2536,7 @@ static void set_misc_timing(const struct mem_controller *ctrl, struct mem_info *

 #endif

-#if DIMM_SUPPORT==0x0204	/* DDR2 and SO-DIMM, S1G1 */
+#if CONFIG_DIMM_SUPPORT==0x0204	/* DDR2 and SO-DIMM, S1G1 */
 	dword = 0x00111222;
 	dwordx = 0x002F2F00;

@@ -2576,7 +2576,7 @@ static void set_misc_timing(const struct mem_controller *ctrl, struct mem_info *
 	}
 #endif

-#if DIMM_SUPPORT==0x0004  /* DDR2 and unbuffered */
+#if CONFIG_DIMM_SUPPORT==0x0004  /* DDR2 and unbuffered */
 	/* for UNBUF DIMM */
 	dword = 0x00111222;
 	dwordx = 0x002f2f00;
@@ -2658,7 +2658,7 @@ static void set_misc_timing(const struct mem_controller *ctrl, struct mem_info *
 	printk_raminit("\tAddr Timing= %08x\n", dwordx);
 #endif

-#if (DIMM_SUPPORT & 0x0100)==0x0000 /* 2T mode only used for unbuffered DIMM */
+#if (CONFIG_DIMM_SUPPORT & 0x0100)==0x0000 /* 2T mode only used for unbuffered DIMM */
 	if (SlowAccessMode) {
 		set_SlowAccessMode(ctrl);
 	}
@@ -2689,7 +2689,7 @@ static void set_misc_timing(const struct mem_controller *ctrl, struct mem_info *
 static void set_RDqsEn(const struct mem_controller *ctrl,
 			const struct mem_param *param, struct mem_info *meminfo)
 {
-#if CPU_SOCKET_TYPE==0x10
+#if CONFIG_CPU_SOCKET_TYPE==0x10
 	//only need to set for reg and x8
 	uint32_t dch;

@@ -2880,7 +2880,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl,

 #include "raminit_f_dqs.c"

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 static uint32_t hoist_memory(int controllers, const struct mem_controller *ctrl,unsigned hole_startk, int i)
 {
 	int ii;
@@ -2941,10 +2941,10 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
 	uint32_t hole_startk;
 	int i;

-	hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK;
+	hole_startk = 4*1024*1024 - CONFIG_HW_MEM_HOLE_SIZEK;

 	printk_raminit("Handling memory hole at 0x%08x (default)\n", hole_startk);
-#if HW_MEM_HOLE_SIZE_AUTO_INC == 1
+#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1
 	/* We need to double check if the hole_startk is valid, if it is equal
 	   to basek, we need to decrease it some */
 	uint32_t basek_pri;
@@ -3143,7 +3143,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl,
 		printk_debug(" done\n");
 	}

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 	/* init hw mem hole here */
 	/* DramHoleValid bit only can be set after MemClrStatus is set by Hardware */
 	set_hw_mem_hole(controllers, ctrl);
@@ -3175,7 +3175,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl,
 	}


-#if MEM_TRAIN_SEQ ==  0
+#if CONFIG_MEM_TRAIN_SEQ ==  0
   #if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1
 	dqs_timing(controllers, ctrl, tsc0, sysinfo);
   #else
@@ -3183,7 +3183,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl,
   #endif
 #else

-#if MEM_TRAIN_SEQ == 2
+#if CONFIG_MEM_TRAIN_SEQ == 2
 	/* need to enable mtrr, so dqs training could access the test address  */
 	setup_mtrr_dqs(sysinfo->tom_k, sysinfo->tom2_k);
 #endif
@@ -3195,18 +3195,18 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl,

 		dqs_timing(i, &ctrl[i], sysinfo, 1);

-#if MEM_TRAIN_SEQ == 1
+#if CONFIG_MEM_TRAIN_SEQ == 1
 		break; // only train the first node with ram
 #endif
 	}

-#if MEM_TRAIN_SEQ == 2
+#if CONFIG_MEM_TRAIN_SEQ == 2
 	clear_mtrr_dqs(sysinfo->tom2_k);
 #endif

 #endif

-#if MEM_TRAIN_SEQ != 1
+#if CONFIG_MEM_TRAIN_SEQ != 1
 	wait_all_core0_mem_trained(sysinfo);
 #endif

--- a/src/northbridge/amd/amdk8/raminit_f_dqs.c
+++ b/src/northbridge/amd/amdk8/raminit_f_dqs.c
@@ -78,7 +78,7 @@ static unsigned Get_MCTSysAddr(const struct mem_controller *ctrl,  unsigned cs_i
 	uint32_t mem_base;
 	unsigned nodeid = ctrl->node_id;

-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 	uint32_t hole_reg;
 #endif

@@ -91,7 +91,7 @@ static unsigned Get_MCTSysAddr(const struct mem_controller *ctrl,  unsigned cs_i
 	mem_base &= 0xffff0000;

 	dword += mem_base;
-#if HW_MEM_HOLE_SIZEK != 0
+#if CONFIG_HW_MEM_HOLE_SIZEK != 0
 	hole_reg = sysinfo->hole_reg[nodeid];
 	if(hole_reg & 1) {
 		unsigned hole_startk;
@@ -855,7 +855,7 @@ static unsigned TrainRcvrEn(const struct mem_controller *ctrl, unsigned Pass, st
 	//restore SSE2 setting
 	disable_sse2();

-#if MEM_TRAIN_SEQ != 1
+#if CONFIG_MEM_TRAIN_SEQ != 1
 	/* We need tidy output for type 1 */
 	printk_debug(" CTLRMaxDelay=%02x\n", CTLRMaxDelay);
 #endif
@@ -1702,7 +1702,7 @@ static unsigned int range_to_mtrr(unsigned int reg,
 			align = max_align;
 		}
 		sizek = 1 << align;
-#if MEM_TRAIN_SEQ != 1
+#if CONFIG_MEM_TRAIN_SEQ != 1
 		printk_debug("Setting variable MTRR %d, base: %4dMB, range: %4dMB, type %s\r\n",
 			reg, range_startk >>10, sizek >> 10,
 			(type==MTRR_TYPE_UNCACHEABLE)?"UC":
@@ -1921,7 +1921,7 @@ static void dqs_restore_MC_NVRAM(unsigned int dev)
 	pci_write_config32(dev, DRAM_CONFIG_HIGH, reg);
 }

-#if MEM_TRAIN_SEQ == 0
+#if CONFIG_MEM_TRAIN_SEQ == 0
 #if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1
 static void dqs_timing(int controllers, const struct mem_controller *ctrl, tsc_t *tsc0, struct sys_info *sysinfo)
 #else
@@ -2007,7 +2007,7 @@ out:
 #endif


-#if MEM_TRAIN_SEQ > 0
+#if CONFIG_MEM_TRAIN_SEQ > 0

 static void dqs_timing(int i, const struct mem_controller *ctrl, struct sys_info *sysinfo, unsigned v)
 {
@@ -2018,7 +2018,7 @@ static void dqs_timing(int i, const struct mem_controller *ctrl, struct sys_info

 	if(sysinfo->mem_trained[i] != 0x80) return;

-#if MEM_TRAIN_SEQ == 1
+#if CONFIG_MEM_TRAIN_SEQ == 1
 	//need to enable mtrr, so dqs training could access the test address
 	setup_mtrr_dqs(sysinfo->tom_k, sysinfo->tom2_k);
 #endif
@@ -2064,7 +2064,7 @@ static void dqs_timing(int i, const struct mem_controller *ctrl, struct sys_info
 	}

 out:
-#if MEM_TRAIN_SEQ == 1
+#if CONFIG_MEM_TRAIN_SEQ == 1
 	clear_mtrr_dqs(sysinfo->tom2_k);
 #endif

@@ -2081,7 +2081,7 @@ out:
 }
 #endif

-#if MEM_TRAIN_SEQ == 1
+#if CONFIG_MEM_TRAIN_SEQ == 1
 static void train_ram(unsigned nodeid, struct sys_info *sysinfo, struct sys_info *sysinfox)
 {
 	dqs_timing(nodeid, &sysinfo->ctrl[nodeid], sysinfo, 0); // keep the output tidy
@@ -2094,7 +2094,7 @@ static void copy_and_run_ap_code_in_car(unsigned ret_addr);
 static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct sys_info *sysinfo, unsigned retcall)
 {
 	if(coreid) return; // only do it on core0
-	struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE);
+	struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 	wait_till_sysinfo_in_ram(); // use pci to get it

 	if(sysinfox->mem_trained[nodeid] == 0x80) {
@@ -2105,7 +2105,7 @@ static inline void train_ram_on_node(unsigned nodeid, unsigned coreid, struct sy
 		sysinfo->mem_trained[nodeid] = sysinfox->mem_trained[nodeid];
 		memcpy(&sysinfo->ctrl[nodeid], &sysinfox->ctrl[nodeid], sizeof(struct mem_controller));
 	#else
-		memcpy(sysinfo, sysinfox, DCACHE_RAM_GLOBAL_VAR_SIZE);
+		memcpy(sysinfo, sysinfox, CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 	#endif
 		set_top_mem_ap(sysinfo->tom_k, sysinfo->tom2_k); // keep the ap's tom consistent with bsp's
 	#if CONFIG_AP_CODE_IN_CAR == 0
--- a/src/northbridge/amd/gx1/Config.lb
+++ b/src/northbridge/amd/gx1/Config.lb
@@ -1,4 +1,4 @@
-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES
 config chip.h
 driver northbridge.o
-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/amd/gx1/northbridge.c
+++ b/src/northbridge/amd/gx1/northbridge.c
@@ -126,7 +126,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -174,7 +174,7 @@ static void pci_domain_set_resources(device_t dev)
 			tolmk = tomk;
 		}

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/amd/gx2/Config.lb
+++ b/src/northbridge/amd/gx2/Config.lb
@@ -1,7 +1,7 @@
-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES
 config chip.h
 driver northbridge.o
 object northbridgeinit.o
 object chipsetinit.o
 object grphinit.o
-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/amd/gx2/northbridge.c
+++ b/src/northbridge/amd/gx2/northbridge.c
@@ -501,7 +501,7 @@ static struct device_operations cpu_bus_ops = {

 void chipsetInit (void);

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -531,7 +531,7 @@ static void enable_dev(struct device *dev)
 		dev->ops = &pci_domain_ops;
 		pci_set_method(dev);
 		tomk = ((sizeram() - VIDEO_MB) * 1024) - SMM_SIZE;
-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/amd/lx/Config.lb
+++ b/src/northbridge/amd/lx/Config.lb
@@ -1,6 +1,6 @@
-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES
 config chip.h
 driver northbridge.o
 object northbridgeinit.o
 object grphinit.o
-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/amd/lx/northbridge.c
+++ b/src/northbridge/amd/lx/northbridge.c
@@ -125,7 +125,7 @@ struct msr_defaults {
 */
 void print_conf(void)
 {
-#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
+#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
 	int i;
 	unsigned long iol;
 	msr_t msr;
@@ -266,7 +266,7 @@ void print_conf(void)
 	iol = inl(GPIO_MAPPER_X);
 	printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_IO_BASE + GPIO_MAPPER_X,
 		     iol);
-#endif				//DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
+#endif				//CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
 }

 /* todo: add a resource record. We don't do this here because this may be called when 
@@ -415,7 +415,7 @@ static void ram_resource(device_t dev, unsigned long index,
 	    IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -436,7 +436,7 @@ static void pci_domain_set_resources(device_t dev)
 		ram_resource(dev, idx++, 0, 640);
 		ram_resource(dev, idx++, 1024, tomk - 1024);	// Systop - 1 MB -> KB

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/ibm/cpc710/cpc710_pci.c
+++ b/src/northbridge/ibm/cpc710/cpc710_pci.c
@@ -45,7 +45,7 @@ cpc710_pci_init(void)
 	setCPC710_PCI32(CPC710_PCIL0_MSIZE,  CPC710_PCI32_MEM_SIZE);
 	setCPC710_PCI32(CPC710_PCIL0_IOSIZE, CPC710_PCI32_IO_SIZE);
 	setCPC710_PCI32(CPC710_PCIL0_SMBAR,  CPC710_PCI32_MEM_BASE);
-	setCPC710_PCI32(CPC710_PCIL0_SIBAR,  CPC710_PCI32_IO_BASE);
+	setCPC710_PCI32(CPC710_PCIL0_SIBAR,  CPC710_PCI32CONFIG_IO_BASE);
 	setCPC710_PCI32(CPC710_PCIL0_CTLRW,  0x00000000);
 	setCPC710_PCI32(CPC710_PCIL0_PSSIZE, 0x00000080);
 	setCPC710_PCI32(CPC710_PCIL0_BARPS,  0x00000000);
@@ -94,7 +94,7 @@ cpc710_pci_init(void)
 	setCPC710_PCI64(CPC710_PCIL0_MSIZE,  CPC710_PCI64_MEM_SIZE);
 	setCPC710_PCI64(CPC710_PCIL0_IOSIZE, CPC710_PCI64_IO_SIZE);
 	setCPC710_PCI64(CPC710_PCIL0_SMBAR,  CPC710_PCI64_MEM_BASE);
-	setCPC710_PCI64(CPC710_PCIL0_SIBAR,  CPC710_PCI64_IO_BASE);
+	setCPC710_PCI64(CPC710_PCIL0_SIBAR,  CPC710_PCI64CONFIG_IO_BASE);
 	setCPC710_PCI64(CPC710_PCIL0_CTLRW,  0x02000000);
 	setCPC710_PCI64(CPC710_PCIL0_PSSIZE, 0x00000080);

--- a/src/northbridge/ibm/cpc710/cpc710_pci.h
+++ b/src/northbridge/ibm/cpc710/cpc710_pci.h
@@ -24,17 +24,17 @@
 #ifndef _CPC710_PCI_H_
 #define _CPC710_PCI_H_

-#define CPC710_PCI32_CONFIG		(PCIC0_CFGADDR & 0xfff00000)
+#define CPC710_PCI32_CONFIG		(CONFIG_PCIC0_CFGADDR & 0xfff00000)
 #define CPC710_PCI32_MEM_SIZE		0xf8000000
 #define CPC710_PCI32_MEM_BASE		0xc0000000
 #define CPC710_PCI32_IO_SIZE		0xf8000000
-#define CPC710_PCI32_IO_BASE		0x80000000
+#define CPC710_PCI32CONFIG_IO_BASE		0x80000000

 //#define CPC710_PCI64_CONFIG		0xff400000
 //#define CPC710_PCI64_MEM_SIZE		0xf8000000
 //#define CPC710_PCI64_MEM_BASE		0xc8000000
 //#define CPC710_PCI64_IO_SIZE		0xf8000000
-//#define CPC710_PCI64_IO_BASE		0x88000000
+//#define CPC710_PCI64CONFIG_IO_BASE		0x88000000

 #define CPC710_PCIL0_PSEA		0xf6110
 #define CPC710_PCIL0_PCIDG		0xf6120
--- a/src/northbridge/intel/e7501/Config.lb
+++ b/src/northbridge/intel/e7501/Config.lb
@@ -1,7 +1,7 @@
-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

 object northbridge.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/intel/e7501/northbridge.c
+++ b/src/northbridge/intel/e7501/northbridge.c
@@ -65,7 +65,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -146,7 +146,7 @@ static void pci_domain_set_resources(device_t dev)
 				(remaplimitk + 64*1024) - remapbasek);
 		}

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/intel/e7520/Config.lb
+++ b/src/northbridge/intel/e7520/Config.lb
@@ -1,4 +1,4 @@
-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h
 driver northbridge.o
@@ -7,10 +7,10 @@ driver pciexp_porta1.o
 driver pciexp_portb.o
 driver pciexp_portc.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1

 makerule raminit_test
 	depends "$(TOP)/src/northbridge/intel/e7520/raminit_test.c"
 	depends "$(TOP)/src/northbridge/intel/e7520/raminit.c"
-	action "$(HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) -Wno-unused-function -I$(TOP)/src/include -g  $< -o $@"
+	action "$(CONFIG_HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) -Wno-unused-function -I$(TOP)/src/include -g  $< -o $@"
 end
--- a/src/northbridge/intel/e7520/northbridge.c
+++ b/src/northbridge/intel/e7520/northbridge.c
@@ -76,7 +76,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -169,7 +169,7 @@ static void pci_domain_set_resources(device_t dev)
 				(remaplimitk + 64*1024) - remapbasek);
 		}

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/intel/e7525/Config.lb
+++ b/src/northbridge/intel/e7525/Config.lb
@@ -1,4 +1,4 @@
-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h
 driver northbridge.o
@@ -7,10 +7,10 @@ driver pciexp_porta1.o
 driver pciexp_portb.o
 driver pciexp_portc.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1

 makerule raminit_test
 	depends "$(TOP)/src/northbridge/intel/e7525/raminit_test.c"
 	depends "$(TOP)/src/northbridge/intel/e7525/raminit.c"
-	action "$(HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) -Wno-unused-function -I$(TOP)/src/include -g  $< -o $@"
+	action "$(CONFIG_HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) -Wno-unused-function -I$(TOP)/src/include -g  $< -o $@"
 end
--- a/src/northbridge/intel/e7525/northbridge.c
+++ b/src/northbridge/intel/e7525/northbridge.c
@@ -76,7 +76,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -169,7 +169,7 @@ static void pci_domain_set_resources(device_t dev)
 				(remaplimitk + 64*1024) - remapbasek);
 		}

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/intel/i3100/Config.lb
+++ b/src/northbridge/intel/i3100/Config.lb
@@ -17,11 +17,11 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##

-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

 driver northbridge.o
 driver pciexp_porta.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/intel/i3100/northbridge.c
+++ b/src/northbridge/intel/i3100/northbridge.c
@@ -97,7 +97,7 @@ static u32 find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -190,7 +190,7 @@ static void pci_domain_set_resources(device_t dev)
 				(remaplimitk + 64*1024) - remapbasek);
 		}

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/intel/i440bx/Config.lb
+++ b/src/northbridge/intel/i440bx/Config.lb
@@ -18,10 +18,10 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##

-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

 driver northbridge.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/intel/i440bx/northbridge.c
+++ b/src/northbridge/intel/i440bx/northbridge.c
@@ -90,7 +90,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -131,7 +131,7 @@ static void pci_domain_set_resources(device_t dev)
 		ram_resource(dev, idx++, 0, 640);
 		ram_resource(dev, idx++, 768, tolmk - 768);

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/intel/i82810/Config.lb
+++ b/src/northbridge/intel/i82810/Config.lb
@@ -18,10 +18,10 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##

-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

 driver northbridge.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/intel/i82810/northbridge.c
+++ b/src/northbridge/intel/i82810/northbridge.c
@@ -122,7 +122,7 @@ static int translate_i82810_to_mb[] = {
 /* MB */0, 8, 0, 16, 16, 24, 32, 32, 48, 64, 64, 96, 128, 128, 192, 256,
 };

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -172,7 +172,7 @@ static void pci_domain_set_resources(device_t dev)
 		ram_resource(dev, idx++, 0, 640);
 		ram_resource(dev, idx++, 768, tolmk - 768);

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/intel/i82830/Config.lb
+++ b/src/northbridge/intel/i82830/Config.lb
@@ -18,11 +18,11 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##

-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

 driver northbridge.o
 driver vga.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/intel/i82830/northbridge.c
+++ b/src/northbridge/intel/i82830/northbridge.c
@@ -107,7 +107,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -149,7 +149,7 @@ static void pci_domain_set_resources(device_t dev)
 		ram_resource(dev, idx++, 0, 640);
 		ram_resource(dev, idx++, 1024, tolmk - 1024);

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/intel/i855gme/Config.lb
+++ b/src/northbridge/intel/i855gme/Config.lb
@@ -18,10 +18,10 @@
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

 object northbridge.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/intel/i855gme/northbridge.c
+++ b/src/northbridge/intel/i855gme/northbridge.c
@@ -88,7 +88,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -147,7 +147,7 @@ static void pci_domain_set_resources(device_t dev)
 		/* ram_resource(dev, idx++, 1024, tolmk - 1024); */
 		ram_resource(dev, idx++, 768, tolmk - 768);

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/intel/i855pm/Config.lb
+++ b/src/northbridge/intel/i855pm/Config.lb
@@ -1,7 +1,7 @@
-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

 object northbridge.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/intel/i855pm/northbridge.c
+++ b/src/northbridge/intel/i855pm/northbridge.c
@@ -66,7 +66,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -114,7 +114,7 @@ static void pci_domain_set_resources(device_t dev)
 		ram_resource(dev, idx++, 0, 640);
 		ram_resource(dev, idx++, 768, tolmk - 768);

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 		/* Leave some space for ACPI, PIRQ and MP tables */
 		high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE * 1024;
--- a/src/northbridge/intel/i945/Config.lb
+++ b/src/northbridge/intel/i945/Config.lb
@@ -17,9 +17,9 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 #

-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1

 config chip.h
 driver northbridge.o
--- a/src/northbridge/intel/i945/northbridge.c
+++ b/src/northbridge/intel/i945/northbridge.c
@@ -93,7 +93,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 #define HIGH_TABLES_SIZE 64	// maximum size of high tables in KB
 extern uint64_t high_tables_base, high_tables_size;
 #endif
@@ -177,7 +177,7 @@ static void pci_domain_set_resources(device_t dev)

 	assign_resources(&dev->link[0]);

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 	/* Leave some space for ACPI, PIRQ and MP tables */
 	high_tables_base = (tomk - HIGH_TABLES_SIZE) * 1024;
 	high_tables_size = HIGH_TABLES_SIZE * 1024;
@@ -199,7 +199,7 @@ static struct device_operations pci_domain_ops = {
 	.enable_resources = enable_childrens_resources,
 	.init             = 0,
 	.scan_bus         = pci_domain_scan_bus,
-#if MMCONF_SUPPORT_DEFAULT
+#if CONFIG_MMCONF_SUPPORT_DEFAULT
 	.ops_pci_bus	  = &pci_ops_mmconf,
 #else
 	.ops_pci_bus	  = &pci_cf8_conf1,
--- a/src/northbridge/via/cn700/Config.lb
+++ b/src/northbridge/via/cn700/Config.lb
@@ -18,7 +18,7 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##

-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

@@ -28,4 +28,4 @@ driver northbridge.o
 driver agp.o
 driver vga.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/via/cn700/northbridge.c
+++ b/src/northbridge/via/cn700/northbridge.c
@@ -163,7 +163,7 @@ static u32 find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 /* maximum size of high tables in KB */
 #define HIGH_TABLES_SIZE 64
 extern uint64_t high_tables_base, high_tables_size;
@@ -206,7 +206,7 @@ static void pci_domain_set_resources(device_t dev)
 			tolmk = tomk;
 		}

-#if HAVE_HIGH_TABLES == 1
+#if CONFIG_HAVE_HIGH_TABLES == 1
 		high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE* 1024;
 		printk_debug("tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size);
--- a/src/northbridge/via/cn700/vga.c
+++ b/src/northbridge/via/cn700/vga.c
@@ -49,10 +49,10 @@ static void vga_init(device_t dev)

 	print_debug("Copying BOCHS BIOS to 0xf000\n");
 	/*
-	 * Copy BOCHS BIOS from 4G-ROM_SIZE-64k (in flash) to 0xf0000 (in RAM)
+	 * Copy BOCHS BIOS from 4G-CONFIG_ROM_SIZE-64k (in flash) to 0xf0000 (in RAM)
 	 * This is for compatibility with the VGA ROM's BIOS callbacks.
 	 */
-	memcpy(0xf0000, (0xffffffff - ROM_SIZE - 0xffff), 0x10000);
+	memcpy(0xf0000, (0xffffffff - CONFIG_ROM_SIZE - 0xffff), 0x10000);

 	printk_debug("Initializing VGA\n");

--- a/src/northbridge/via/cx700/Config.lb
+++ b/src/northbridge/via/cx700/Config.lb
@@ -15,7 +15,7 @@
 ## along with this program; if not, write to the Free Software
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA

-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

@@ -28,4 +28,4 @@ driver cx700_lpc.o
 driver cx700_sata.o
 driver cx700_vga.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/via/cx700/northbridge.c
+++ b/src/northbridge/via/cx700/northbridge.c
@@ -87,7 +87,7 @@ static u32 find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 /* maximum size of high tables in KB */
 #define HIGH_TABLES_SIZE 64
 extern uint64_t high_tables_base, high_tables_size;
@@ -131,7 +131,7 @@ static void pci_domain_set_resources(device_t dev)
 		tolmk -= 1024;	// TOP 1M SM Memory
 	}

-#if HAVE_HIGH_TABLES == 1
+#if CONFIG_HAVE_HIGH_TABLES == 1
 	high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024;
 	high_tables_size = HIGH_TABLES_SIZE* 1024;
 	printk_debug("tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size);
--- a/src/northbridge/via/vt8601/Config.lb
+++ b/src/northbridge/via/vt8601/Config.lb
@@ -1,7 +1,7 @@
-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

 driver northbridge.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/via/vt8601/northbridge.c
+++ b/src/northbridge/via/vt8601/northbridge.c
@@ -101,7 +101,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 /* maximum size of high tables in KB */
 #define HIGH_TABLES_SIZE 64
 extern uint64_t high_tables_base, high_tables_size;
@@ -147,7 +147,7 @@ static void pci_domain_set_resources(device_t dev)
 			tolmk = tomk;
 		}

-#if HAVE_HIGH_TABLES == 1
+#if CONFIG_HAVE_HIGH_TABLES == 1
 		high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE* 1024;
 		printk_debug("tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size);
--- a/src/northbridge/via/vt8623/Config.lb
+++ b/src/northbridge/via/vt8623/Config.lb
@@ -1,7 +1,7 @@
-uses HAVE_HIGH_TABLES
+uses CONFIG_HAVE_HIGH_TABLES

 config chip.h

 driver northbridge.o

-default HAVE_HIGH_TABLES=1
+default CONFIG_HAVE_HIGH_TABLES=1
--- a/src/northbridge/via/vt8623/northbridge.c
+++ b/src/northbridge/via/vt8623/northbridge.c
@@ -253,7 +253,7 @@ static uint32_t find_pci_tolm(struct bus *bus)
 	return tolm;
 }

-#if HAVE_HIGH_TABLES==1
+#if CONFIG_HAVE_HIGH_TABLES==1
 /* maximum size of high tables in KB */
 #define HIGH_TABLES_SIZE 64
 extern uint64_t high_tables_base, high_tables_size;
@@ -299,7 +299,7 @@ static void pci_domain_set_resources(device_t dev)
 			tolmk = tomk;
 		}

-#if HAVE_HIGH_TABLES == 1
+#if CONFIG_HAVE_HIGH_TABLES == 1
 		high_tables_base = (tolmk - HIGH_TABLES_SIZE) * 1024;
 		high_tables_size = HIGH_TABLES_SIZE* 1024;
 		printk_debug("tom: %lx, high_tables_base: %llx, high_tables_size: %llx\n", tomk*1024, high_tables_base, high_tables_size);
--- a/src/northbridge/via/vx800/examples/cache_as_ram_auto.c
+++ b/src/northbridge/via/vx800/examples/cache_as_ram_auto.c
@@ -563,7 +563,7 @@ the following code is  copied from src\mainboard\tyan\s2735\cache_as_ram_auto.c
 Only the code around CLEAR_FIRST_1M_RAM is changed.
 I remove all the code around CLEAR_FIRST_1M_RAM and #include "cpu/x86/car/cache_as_ram_post.c"
 the CLEAR_FIRST_1M_RAM seems to make cpu/x86/car/cache_as_ram_post.c stop at somewhere, 
-and cpu/x86/car/cache_as_ram_post.c  do not cache my $XIP_ROM_BASE+SIZE area.
+and cpu/x86/car/cache_as_ram_post.c  do not cache my $CONFIG_XIP_ROM_BASE+SIZE area.

 So,I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c have some diff withx86-version
 */
@@ -621,11 +621,11 @@ So,I use: #include "cpu/via/car/cache_as_ram_post.c". my via-version post.c have
 #include "cpu/via/car/cache_as_ram_post.c"
 //#include "cpu/x86/car/cache_as_ram_post.c"    
 	__asm__ volatile (
-				 /* set new esp *//* before _RAMBASE */
+				 /* set new esp *//* before CONFIG_RAMBASE */
 				 "subl   %0, %%ebp\n\t"
 				 "subl   %0, %%esp\n\t"::
-				 "a" ((DCACHE_RAM_BASE + DCACHE_RAM_SIZE) -
-				      _RAMBASE)
+				 "a" ((CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE) -
+				      CONFIG_RAMBASE)
 	    );

 	{
--- a/src/northbridge/via/vx800/examples/chipset_init.c
+++ b/src/northbridge/via/vx800/examples/chipset_init.c
@@ -18,7 +18,7 @@
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

-#if HAVE_ACPI_RESUME == 1
+#if CONFIG_HAVE_ACPI_RESUME == 1
 #include <arch/acpi.h>
 #endif
 #include <../northbridge/via/vx800/vx800.h>
@@ -620,7 +620,7 @@ void init_VIA_chipset(void)
 void hardwaremain(int boot_complete)
 {
 	struct lb_memory *lb_mem;
-#if HAVE_ACPI_RESUME == 1
+#if CONFIG_HAVE_ACPI_RESUME == 1
 	void *wake_vec;
 #endif

--- a/src/northbridge/via/vx800/romstrap.lds
+++ b/src/northbridge/via/vx800/romstrap.lds
@@ -19,7 +19,7 @@
 */

 SECTIONS {
-	. = (_ROMBASE + ROM_IMAGE_SIZE - 0x2c) - (__romstrap_end - __romstrap_start);
+	. = (CONFIG_ROMBASE + CONFIG_ROM_IMAGE_SIZE - 0x2c) - (__romstrap_end - __romstrap_start);
 	.romstrap (.): {
 		*(.romstrap)
 	}