sdm845: Combine BB with QC-Sec for ROM boot

TEST=build & run

Change-Id: I222a56f1c9b74856a1e1ff8132bab5e041672c5d
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25207
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

util/qualcomm/ipqheader.py

@@ -0,0 +1,129 @@
+#!/usr/bin/env python2
+#
+# Copyright (c) 2013 The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its
+#    contributors may be used to endorse or promote products derived from this
+#    software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+import os
+import struct
+import sys
+
+PROG_NAME = os.path.basename(sys.argv[0])
+
+def create_header(base, size):
+    """Returns a packed MBN header image with the specified base and size.
+
+    @arg base: integer, specifies the image load address in RAM
+    @arg size: integer, specifies the size of the image
+    @returns: string, the MBN header
+    """
+
+    # SBLs require size to be 4 bytes aligned.
+    size = (size + 3) & 0xfffffffc
+
+    # We currently do not support appending certificates. Signing GPL
+    # code might violate the GPL. So U-Boot will never be signed. So
+    # this is not required for U-Boot.
+
+    header = [
+        0x5,         # Type: APPSBL
+        0x3,         # Version: 3
+        0x0,         # Image source pointer
+        base,        # Image destination pointer
+        size,        # Code Size + Cert Size + Signature Size
+        size,        # Code Size
+        base + size, # Destination + Code Size
+        0x0,         # Signature Size
+        base + size, # Destination + Code Size + Signature Size
+        0x0,         # Cert Size
+    ]
+
+    header_packed = struct.pack('<10I', *header)
+    return header_packed
+
+def mkheader(base_addr, infname, outfname):
+    """Prepends the image with the MBN header.
+
+    @arg base_addr: integer, specifies the image load address in RAM
+    @arg infname: string, image filename
+    @arg outfname: string, output image with header prepended
+    @raises IOError: if reading/writing input/output file fails
+    """
+    with open(infname, "rb") as infp:
+        image = infp.read()
+        insize = len(image)
+
+    if base_addr > 0xFFFFFFFF:
+        raise ValueError("invalid base address")
+
+    if base_addr + insize > 0xFFFFFFFF:
+        raise ValueError("invalid destination range")
+
+    header = create_header(base_addr, insize)
+    with open(outfname, "wb") as outfp:
+        outfp.write(header)
+        outfp.write(image)
+
+def usage(msg=None):
+    """Print command usage.
+
+    @arg msg: string, error message if any (default: None)
+    """
+    if msg != None:
+        sys.stderr.write("%s: %s\n" % (PROG_NAME, msg))
+
+    print "Usage: %s <base-addr> <input-file> <output-file>" % PROG_NAME
+
+    if msg != None:
+        exit(1)
+
+def main():
+    """Main entry function"""
+
+    if len(sys.argv) != 4:
+        usage("incorrect number of arguments")
+
+    try:
+        base_addr = int(sys.argv[1], 0)
+        infname = sys.argv[2]
+        outfname = sys.argv[3]
+    except ValueError as e:
+        sys.stderr.write("mkheader: invalid base address '%s'\n" % sys.argv[1])
+        exit(1)
+
+    try:
+        mkheader(base_addr, infname, outfname)
+    except IOError as e:
+        sys.stderr.write("%s: %s\n" % (PROG_NAME, e))
+        exit(1)
+    except ValueError as e:
+        sys.stderr.write("%s: %s\n" % (PROG_NAME, e))
+        exit(1)
+
+if __name__ == "__main__":
+    main()