mainboard/bap/ode_e21XX: Add copy of amd/olivehillplus
Initial copy of olivehillplus. Change-Id: Ibe9b450c05bfad15a95852addb1465ac2d3cef61 Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15917 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This commit is contained in:
Fabian Kunkel
committed by
Kyösti Mälkki
Kyösti Mälkki
parent
b0f81518b5
commit
171e2c965a
305
src/mainboard/bap/ode_e21XX/BiosCallOuts.c
Normal file
305
src/mainboard/bap/ode_e21XX/BiosCallOuts.c
Normal file
@@ -0,0 +1,305 @@
|
||||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2012 Advanced Micro Devices, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include "AGESA.h"
|
||||
#include "amdlib.h"
|
||||
#include <northbridge/amd/pi/BiosCallOuts.h>
|
||||
#include "Ids.h"
|
||||
#include "heapManager.h"
|
||||
#include "FchPlatform.h"
|
||||
#include "cbfs.h"
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
#include "imc.h"
|
||||
#endif
|
||||
#include "hudson.h"
|
||||
#include <stdlib.h>
|
||||
|
||||
static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
|
||||
|
||||
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
|
||||
{
|
||||
{AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer },
|
||||
{AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer },
|
||||
{AGESA_LOCATE_BUFFER, agesa_LocateBuffer },
|
||||
{AGESA_READ_SPD, agesa_ReadSpd },
|
||||
{AGESA_DO_RESET, agesa_Reset },
|
||||
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
|
||||
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
|
||||
{AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
|
||||
{AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
|
||||
{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
|
||||
{AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
|
||||
{AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
|
||||
};
|
||||
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
|
||||
|
||||
/**
|
||||
* Realtek ALC272 CODEC Verb Table
|
||||
*/
|
||||
static const CODEC_ENTRY Alc272_VerbTbl[] = {
|
||||
{0x11, 0x411111F0}, // - SPDIF_OUT2
|
||||
{0x12, 0x411111F0}, // - DMIC_1/2
|
||||
{0x13, 0x411111F0}, // - DMIC_3/4
|
||||
{0x14, 0x411111F0}, // Port D - LOUT1
|
||||
{0x15, 0x411111F0}, // Port A - LOUT2
|
||||
{0x16, 0x411111F0}, //
|
||||
{0x17, 0x411111F0}, // Port H - MONO
|
||||
{0x18, 0x01a19840}, // Port B - MIC1
|
||||
{0x19, 0x411111F0}, // Port F - MIC2
|
||||
{0x1a, 0x01813030}, // Port C - LINE1
|
||||
{0x1b, 0x411111F0}, // Port E - LINE2
|
||||
{0x1d, 0x40251E05}, // - PCBEEP
|
||||
{0x1e, 0x01441120}, // - SPDIF_OUT1
|
||||
{0x21, 0x01214010}, // Port I - HPOUT
|
||||
{0xff, 0xffffffff}
|
||||
};
|
||||
|
||||
static const CODEC_TBL_LIST CodecTableList[] =
|
||||
{
|
||||
{0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]},
|
||||
{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
|
||||
};
|
||||
|
||||
#define FAN_INPUT_INTERNAL_DIODE 0
|
||||
#define FAN_INPUT_TEMP0 1
|
||||
#define FAN_INPUT_TEMP1 2
|
||||
#define FAN_INPUT_TEMP2 3
|
||||
#define FAN_INPUT_TEMP3 4
|
||||
#define FAN_INPUT_TEMP0_FILTER 5
|
||||
#define FAN_INPUT_ZERO 6
|
||||
#define FAN_INPUT_DISABLED 7
|
||||
|
||||
#define FAN_AUTOMODE (1 << 0)
|
||||
#define FAN_LINEARMODE (1 << 1)
|
||||
#define FAN_STEPMODE ~(1 << 1)
|
||||
#define FAN_POLARITY_HIGH (1 << 2)
|
||||
#define FAN_POLARITY_LOW ~(1 << 2)
|
||||
|
||||
/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
|
||||
#define FREQ_28KHZ 0x0
|
||||
#define FREQ_25KHZ 0x1
|
||||
#define FREQ_23KHZ 0x2
|
||||
#define FREQ_21KHZ 0x3
|
||||
#define FREQ_29KHZ 0x4
|
||||
#define FREQ_18KHZ 0x5
|
||||
#define FREQ_100HZ 0xF7
|
||||
#define FREQ_87HZ 0xF8
|
||||
#define FREQ_58HZ 0xF9
|
||||
#define FREQ_44HZ 0xFA
|
||||
#define FREQ_35HZ 0xFB
|
||||
#define FREQ_29HZ 0xFC
|
||||
#define FREQ_22HZ 0xFD
|
||||
#define FREQ_14HZ 0xFE
|
||||
#define FREQ_11HZ 0xFF
|
||||
|
||||
/*
|
||||
* Hardware Monitor Fan Control
|
||||
* Hardware limitation:
|
||||
* HWM will fail to read the input temperature via I2C if other
|
||||
* software switches the I2C address. AMD recommends using IMC
|
||||
* to control fans, instead of HWM.
|
||||
*/
|
||||
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
{
|
||||
FCH_HWM_FAN_CTR oem_factl[5] = {
|
||||
/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
|
||||
/* DB-FT3 FanOUT0 Fan header J32 */
|
||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
||||
/* DB-FT3 FanOUT1 Fan header J31*/
|
||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
||||
{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
|
||||
};
|
||||
LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
|
||||
|
||||
/* Enable IMC fan control. the recommended way */
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
|
||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
|
||||
|
||||
FchParams->Imc.ImcEnable = TRUE;
|
||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
||||
|
||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
||||
|
||||
/* Thermal Zone Parameter */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
|
||||
|
||||
/* IMC Fan Policy temperature thresholds */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
||||
|
||||
/* IMC Fan Policy PWM Settings */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
||||
|
||||
/* IMC Function */
|
||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8;
|
||||
|
||||
/* NOTE:
|
||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
|
||||
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
|
||||
* so we remove it from AGESA code. Please See FchInitLateHwm.
|
||||
*/
|
||||
|
||||
#else /* HWM fan control, using the alternative method */
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */
|
||||
|
||||
#endif /* CONFIG_HUDSON_IMC_FWM */
|
||||
}
|
||||
|
||||
/**
|
||||
* Fch Oem setting callback
|
||||
*
|
||||
* Configure platform specific Hudson device,
|
||||
* such Azalia, SATA, IMC etc.
|
||||
*/
|
||||
static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
|
||||
{
|
||||
AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr;
|
||||
if (StdHeader->Func == AMD_INIT_RESET) {
|
||||
FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *) FchData;
|
||||
printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
|
||||
//FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
|
||||
FchParams->LegacyFree = CONFIG_HUDSON_LEGACY_FREE;
|
||||
FchParams->FchReset.SataEnable = hudson_sata_enable();
|
||||
FchParams->FchReset.IdeEnable = hudson_ide_enable();
|
||||
FchParams->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
|
||||
FchParams->FchReset.Xhci1Enable = FALSE;
|
||||
} else if (StdHeader->Func == AMD_INIT_ENV) {
|
||||
FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData;
|
||||
printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
|
||||
|
||||
/* Azalia Controller OEM Codec Table Pointer */
|
||||
FchParams->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
|
||||
/* Azalia Controller Front Panel OEM Table Pointer */
|
||||
|
||||
/* Fan Control */
|
||||
oem_fan_control(FchParams);
|
||||
|
||||
/* XHCI configuration */
|
||||
FchParams->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
|
||||
FchParams->Usb.Xhci1Enable = FALSE;
|
||||
|
||||
/* sata configuration */
|
||||
FchParams->Sata.SataClass = CONFIG_HUDSON_SATA_MODE;
|
||||
switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) {
|
||||
case SataRaid:
|
||||
case SataAhci:
|
||||
case SataAhci7804:
|
||||
case SataLegacyIde:
|
||||
FchParams->Sata.SataIdeMode = FALSE;
|
||||
break;
|
||||
case SataIde2Ahci:
|
||||
case SataIde2Ahci7804:
|
||||
default: /* SataNativeIde */
|
||||
FchParams->Sata.SataIdeMode = TRUE;
|
||||
break;
|
||||
}
|
||||
}
|
||||
printk(BIOS_DEBUG, "Done\n");
|
||||
|
||||
return AGESA_SUCCESS;
|
||||
}
|
||||
Reference in New Issue
Block a user