{gm45,pineview,sandybridge,x4x}: Use {full,system}_reset() function
Use already defined system_reset() and full_reset() functions. Change-Id: Ic29fab70cf7f23d49c3eeeb97c984c523f973972 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
This commit is contained in:
		
				
					committed by
					
						 Patrick Georgi
						Patrick Georgi
					
				
			
			
				
	
			
			
			
						parent
						
							ba092a9ab6
						
					
				
				
					commit
					1bc7b6e135
				
			| @@ -16,8 +16,9 @@ | ||||
|  | ||||
| #include <types.h> | ||||
| #include <arch/io.h> | ||||
| #include <cf9_reset.h> | ||||
| #include <device/pci_ops.h> | ||||
| #include <halt.h> | ||||
|  | ||||
| #include "gm45.h" | ||||
|  | ||||
| void gm45_early_reset(void/*const timings_t *const timings*/) | ||||
| @@ -63,8 +64,5 @@ void gm45_early_reset(void/*const timings_t *const timings*/) | ||||
| 	/* Normally, we would set this after successful raminit. */ | ||||
| 	MCHBAR32(DCC_MCHBAR) |= (1 << 19); | ||||
|  | ||||
| 	/* Perform system reset through CF9 interface. */ | ||||
| 	outb(0x02, 0xcf9); /* Set system reset bit. */ | ||||
| 	outb(0x06, 0xcf9); /* Set CPU reset bit, too. */ | ||||
| 	halt(); | ||||
| 	system_reset(); | ||||
| } | ||||
|   | ||||
| @@ -15,6 +15,7 @@ | ||||
|  */ | ||||
|  | ||||
| #include <arch/io.h> | ||||
| #include <cf9_reset.h> | ||||
| #include <device/mmio.h> | ||||
| #include <device/pci_ops.h> | ||||
| #include <console/console.h> | ||||
| @@ -1744,10 +1745,8 @@ static void sdram_checkreset(void) | ||||
| 	} | ||||
| 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, pmcon2); | ||||
| 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, pmcon3); | ||||
| 	if (reset) { | ||||
| 		printk(BIOS_DEBUG, "Power cycle reset...\n"); | ||||
| 		outb(0xe, 0xcf9); | ||||
| 	} | ||||
| 	if (reset) | ||||
| 		full_reset(); | ||||
| } | ||||
|  | ||||
| static void sdram_dradrb(struct sysinfo *s) | ||||
|   | ||||
| @@ -18,6 +18,7 @@ | ||||
| #include <stdint.h> | ||||
| #include <console/console.h> | ||||
| #include <arch/io.h> | ||||
| #include <cf9_reset.h> | ||||
| #include <device/pci_ops.h> | ||||
| #include <cpu/x86/lapic.h> | ||||
| #include <timestamp.h> | ||||
| @@ -47,10 +48,8 @@ void mainboard_romstage_entry(unsigned long bist) | ||||
| { | ||||
| 	int s3resume = 0; | ||||
|  | ||||
| 	if (MCHBAR16(SSKPD) == 0xCAFE) { | ||||
| 		outb(0x6, 0xcf9); | ||||
| 		halt (); | ||||
| 	} | ||||
| 	if (MCHBAR16(SSKPD) == 0xCAFE) | ||||
| 		system_reset(); | ||||
|  | ||||
| 	if (bist == 0) | ||||
| 		enable_lapic(); | ||||
|   | ||||
| @@ -22,7 +22,6 @@ | ||||
| #include <cpu/x86/cache.h> | ||||
| #include <cpu/x86/mtrr.h> | ||||
| #include <arch/cpu.h> | ||||
| #include <halt.h> | ||||
| #if CONFIG(SOUTHBRIDGE_INTEL_I82801GX) | ||||
| #include <southbridge/intel/i82801gx/i82801gx.h> /* smbus_read_byte */ | ||||
| #else | ||||
| @@ -624,9 +623,7 @@ static void checkreset_ddr2(int boot_path) | ||||
| 		reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xf0); | ||||
| 		pci_write_config8(PCI_DEV(0, 0, 0), 0xf0, reg8 |  (1 << 2)); | ||||
|  | ||||
| 		printk(BIOS_DEBUG, "Reset...\n"); | ||||
| 		outb(0xe, 0xcf9); | ||||
| 		asm ("hlt"); | ||||
| 		full_reset(); | ||||
| 	} | ||||
| 	pmcon2 |= 0x80; | ||||
| 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, pmcon2); | ||||
|   | ||||
		Reference in New Issue
	
	Block a user