treewide: Capitalize 'CMOS'

Change-Id: I1d36e554618498d70f33f6c425b0abc91d4fb952
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38928
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Elyes HAOUAS
2020-02-16 10:01:33 +01:00
committed by Patrick Georgi
parent ebdf298ec2
commit 2119d0ba43
27 changed files with 50 additions and 50 deletions

View File

@@ -75,7 +75,7 @@ Put all back in place and restart the board. It might need 1-2 AC power cycles
to reinitialize (running at full fan speed - don't panic).
* External flashing has been tested with RPi2 without main power connected.
3.3V provided by RPi2. Read more about flashing methods [here](https://doc.coreboot.org/flash_tutorial/index.html).
* In case of going back to proprietary BIOS create/save cmos settings as early
* In case of going back to proprietary BIOS create/save CMOS settings as early
as possible (do not leave BIOS on first start without saving settings).
The BIOS might corrupt nvram (not cmos!) and leave the system in a dead state
that needs an external flasher to revive. If stuck, reset the Fintek (see

View File

@@ -164,7 +164,7 @@ Drivers (29 commits)
* i2c/hid: Add generic I2C HID driver
* i2c/max98927: add i2c driver for Maxim 98927 codec
* i2c/wacom_ts: Add support for WCOM touchscreen device driver
* pc80/rtc: Check cmos checksum BEFORE reading cmos value
* pc80/rtc: Check CMOS checksum BEFORE reading CMOS value
* regulator: Add driver for handling GPIO-based fixed regulator
* storage: Add SD/MMC/eMMC driver based upon depthcharge