src/soc to src/superio: Fix spelling errors

These issues were found and fixed by codespell, a useful tool for
finding spelling errors.

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ieafbc93e49fcef198ac6e31fc8a3b708c395e08e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58082
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/southbridge/amd/agesa/hudson/acpi/fch.asl

@@ -67,7 +67,7 @@ Name(CRES, ResourceTemplate() {
 	 * The Secondary bus range for PCI0 lets the system
 	 * know what bus values are allowed on the downstream
 	 * side of this PCI bus if there is a PCI-PCI bridge.
-	 * PCI busses can have 256 secondary busses which
+	 * PCI buses can have 256 secondary buses which
 	 * range from [0-0xFF] but they do not need to be
 	 * sequential.
 	 */

src/southbridge/amd/cimx/sb800/acpi/fch.asl

@@ -77,7 +77,7 @@ Name(CRES, ResourceTemplate() {
 	 * The Secondary bus range for PCI0 lets the system
 	 * know what bus values are allowed on the downstream
 	 * side of this PCI bus if there is a PCI-PCI bridge.
-	 * PCI busses can have 256 secondary busses which
+	 * PCI buses can have 256 secondary buses which
 	 * range from [0-0xFF] but they do not need to be
 	 * sequential.
 	 */

src/southbridge/amd/pi/hudson/acpi/fch.asl

@@ -50,7 +50,7 @@ Name(CRES, ResourceTemplate() {
 	 * The Secondary bus range for PCI0 lets the system
 	 * know what bus values are allowed on the downstream
 	 * side of this PCI bus if there is a PCI-PCI bridge.
-	 * PCI busses can have 256 secondary busses which
+	 * PCI buses can have 256 secondary buses which
 	 * range from [0-0xFF] but they do not need to be
 	 * sequential.
 	 */

src/southbridge/intel/bd82x6x/azalia.c

@@ -162,7 +162,7 @@ static void azalia_init(struct device *dev)
 	if (!res)
 		return;
 
-	// NOTE this will break as soon as the Azalia get's a bar above 4G.
+	// NOTE this will break as soon as the Azalia gets a bar above 4G.
 	// Is there anything we can do about it?
 	base = res2mmio(res, 0, 0);
 	printk(BIOS_DEBUG, "Azalia: base = %p\n", base);

src/southbridge/intel/bd82x6x/lpc.c

@@ -31,7 +31,7 @@
 typedef struct southbridge_intel_bd82x6x_config config_t;
 
 /**
- * Set miscellanous static southbridge features.
+ * Set miscellaneous static southbridge features.
  *
  * @param dev PCI device with I/O APIC control registers
  */

src/southbridge/intel/i82371eb/acpi_tables.c

@@ -29,7 +29,7 @@ void generate_cpu_entries(const struct device *device)
 	int numcpus = determine_total_number_of_cores();
 	printk(BIOS_DEBUG, "Found %d CPU(s).\n", numcpus);
 
-	/* without the outer scope, furhter ssdt addition will end up
+	/* without the outer scope, further ssdt addition will end up
 	 * within the processor statement */
 	acpigen_write_scope("\\_SB");
 	for (cpu=0; cpu < numcpus; cpu++) {

src/southbridge/intel/i82371eb/smbus.c

@@ -27,7 +27,7 @@ static void pwrmgt_enable(struct device *dev)
 	 * bit25 (lid_pol): 1=invert lid polarity
 	 * bit24 (sm_freeze): 1=freeze idle and standby timers
 	 * bit16 (end of smi): 0=disable smi assertion (cleared by hw)
-	 * bits8-15,26: global standby timer inital count 127 * 4minutes
+	 * bits8-15,26: global standby timer initial count 127 * 4minutes
 	 * bit2  (thrm_pol): 1=active low THRM#
 	 * bit0  (smi_en): 1=disable smi generation upon smi event
 	 */

src/southbridge/intel/i82801dx/lpc.c

@@ -32,7 +32,7 @@ static void i82801dx_enable_acpi(struct device *dev)
 }
 
 /**
- * Set miscellanous static southbridge features.
+ * Set miscellaneous static southbridge features.
  *
  * @param dev PCI device with I/O APIC control registers
  */

src/southbridge/intel/i82801gx/azalia.c

@@ -190,7 +190,7 @@ static void azalia_init(struct device *dev)
 	if (!res)
 		return;
 
-	// NOTE this will break as soon as the Azalia get's a bar above 4G.
+	// NOTE this will break as soon as the Azalia gets a bar above 4G.
 	// Is there anything we can do about it?
 	base = res2mmio(res, 0, 0);
 	printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)(uintptr_t)base);

src/southbridge/intel/i82801ix/azalia.c

@@ -183,7 +183,7 @@ static void azalia_init(struct device *dev)
 	if (!res)
 		return;
 
-	// NOTE this will break as soon as the Azalia get's a bar above 4G.
+	// NOTE this will break as soon as the Azalia gets a bar above 4G.
 	// Is there anything we can do about it?
 	base = res2mmio(res, 0, 0);
 	printk(BIOS_DEBUG, "Azalia: base = %p\n", base);

src/southbridge/intel/i82801jx/azalia.c

@@ -183,7 +183,7 @@ static void azalia_init(struct device *dev)
 	if (!res)
 		return;
 
-	// NOTE this will break as soon as the Azalia get's a bar above 4G.
+	// NOTE this will break as soon as the Azalia gets a bar above 4G.
 	// Is there anything we can do about it?
 	base = res2mmio(res, 0, 0);
 	printk(BIOS_DEBUG, "Azalia: base = %p\n", base);

src/southbridge/intel/ibexpeak/azalia.c

@@ -162,7 +162,7 @@ static void azalia_init(struct device *dev)
 	if (!res)
 		return;
 
-	// NOTE this will break as soon as the Azalia get's a bar above 4G.
+	// NOTE this will break as soon as the Azalia gets a bar above 4G.
 	// Is there anything we can do about it?
 	base = res2mmio(res, 0, 0);
 	printk(BIOS_DEBUG, "Azalia: base = %p\n", base);

src/southbridge/intel/ibexpeak/lpc.c

@@ -28,7 +28,7 @@
 typedef struct southbridge_intel_ibexpeak_config config_t;
 
 /**
- * Set miscellanous static southbridge features.
+ * Set miscellaneous static southbridge features.
  *
  * @param dev PCI device with I/O APIC control registers
  */

src/southbridge/intel/lynxpoint/lpc.c

@@ -25,7 +25,7 @@
 #define NMI_OFF	0
 
 /**
- * Set miscellanous static southbridge features.
+ * Set miscellaneous static southbridge features.
  *
  * @param dev PCI device with I/O APIC control registers
  */

src/southbridge/intel/lynxpoint/me_status.c

@@ -187,7 +187,7 @@ void intel_me_status(struct me_hfs *hfs, struct me_hfs2 *hfs2)
 		break;
 
 	default:
-		printk(BIOS_DEBUG, "Unknown phase: 0x%02x sate: 0x%02x",
+		printk(BIOS_DEBUG, "Unknown phase: 0x%02x state: 0x%02x",
 		       hfs2->progress_code, hfs2->current_state);
 	}
 	printk(BIOS_DEBUG, "\n");

src/southbridge/intel/lynxpoint/pch.h

@@ -647,7 +647,7 @@ void mainboard_config_rcba(void);
 #define SPIBAR16(x) RCBA16((x) + SPIBAR_OFFSET)
 #define SPIBAR32(x) RCBA32((x) + SPIBAR_OFFSET)
 
-/* Reigsters within the SPIBAR */
+/* Registers within the SPIBAR */
 #define SSFC 0x91
 #define FDOC 0xb0
 #define FDOD 0xb4