Add support for VIA EPIA-M850 board
EPIA-M850 can now boot linux. For a list of issues, see: http://www.coreboot.org/VIA_EPIA-M850 That's all folks. Change-Id: I7624944dbc05fbf3019897a116954d71dfda0031 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/1228 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit is contained in:
Alexandru Gagniuc
committed by
Ronald G. Minnich
Ronald G. Minnich
parent
23211b0200
commit
37a8a8bd9e
@@ -9,6 +9,11 @@ config BOARD_VIA_EPIA_CN
|
|||||||
bool "EPIA-CN"
|
bool "EPIA-CN"
|
||||||
config BOARD_VIA_EPIA_M700
|
config BOARD_VIA_EPIA_M700
|
||||||
bool "EPIA-M700"
|
bool "EPIA-M700"
|
||||||
|
config BOARD_VIA_EPIA_M850
|
||||||
|
bool "EPIA-M850"
|
||||||
|
help
|
||||||
|
STOP RIGHT HERE AND READ THIS!!!
|
||||||
|
Read http://www.coreboot.org/VIA_EPIA-M850 before you proceed.
|
||||||
config BOARD_VIA_EPIA_M
|
config BOARD_VIA_EPIA_M
|
||||||
bool "EPIA-M"
|
bool "EPIA-M"
|
||||||
config BOARD_VIA_EPIA_N
|
config BOARD_VIA_EPIA_N
|
||||||
@@ -23,6 +28,7 @@ endchoice
|
|||||||
source "src/mainboard/via/epia/Kconfig"
|
source "src/mainboard/via/epia/Kconfig"
|
||||||
source "src/mainboard/via/epia-cn/Kconfig"
|
source "src/mainboard/via/epia-cn/Kconfig"
|
||||||
source "src/mainboard/via/epia-m700/Kconfig"
|
source "src/mainboard/via/epia-m700/Kconfig"
|
||||||
|
source "src/mainboard/via/epia-m850/Kconfig"
|
||||||
source "src/mainboard/via/epia-m/Kconfig"
|
source "src/mainboard/via/epia-m/Kconfig"
|
||||||
source "src/mainboard/via/epia-n/Kconfig"
|
source "src/mainboard/via/epia-n/Kconfig"
|
||||||
source "src/mainboard/via/pc2500e/Kconfig"
|
source "src/mainboard/via/pc2500e/Kconfig"
|
||||||
|
|||||||
49
src/mainboard/via/epia-m850/Kconfig
Normal file
49
src/mainboard/via/epia-m850/Kconfig
Normal file
@@ -0,0 +1,49 @@
|
|||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2011-2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
||||||
|
##
|
||||||
|
## This program is free software: you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation, either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU General Public License
|
||||||
|
## along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
##
|
||||||
|
|
||||||
|
if BOARD_VIA_EPIA_M850
|
||||||
|
|
||||||
|
config BOARD_SPECIFIC_OPTIONS # dummy
|
||||||
|
def_bool y
|
||||||
|
select ARCH_X86
|
||||||
|
select CPU_VIA_NANO
|
||||||
|
select NORTHBRIDGE_VIA_VX900
|
||||||
|
select SUPERIO_FINTEK_F81865F
|
||||||
|
select HAVE_PIRQ_TABLE
|
||||||
|
select PIRQ_ROUTE
|
||||||
|
select HAVE_MP_TABLE
|
||||||
|
#select HAVE_OPTION_TABLE
|
||||||
|
#select HAVE_ACPI_TABLES
|
||||||
|
#select HAVE_ACPI_RESUME
|
||||||
|
#select BOARD_HAS_FADT
|
||||||
|
select BOARD_ROMSIZE_KB_512
|
||||||
|
|
||||||
|
config MAINBOARD_DIR
|
||||||
|
string
|
||||||
|
default via/epia-m850
|
||||||
|
|
||||||
|
config MAINBOARD_PART_NUMBER
|
||||||
|
string
|
||||||
|
default "EPIA-M850"
|
||||||
|
|
||||||
|
config IRQ_SLOT_COUNT
|
||||||
|
int
|
||||||
|
default 13
|
||||||
|
|
||||||
|
endif # BOARD_VIA_EPIA_M850
|
||||||
21
src/mainboard/via/epia-m850/Makefile.inc
Normal file
21
src/mainboard/via/epia-m850/Makefile.inc
Normal file
@@ -0,0 +1,21 @@
|
|||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2011 Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
||||||
|
##
|
||||||
|
## This program is free software: you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation, either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU General Public License
|
||||||
|
## along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
##
|
||||||
|
|
||||||
|
#romstage-y += ./../../../superio/fintek/f81865f/f81865f_early_serial.c
|
||||||
|
|
||||||
111
src/mainboard/via/epia-m850/devicetree.cb
Normal file
111
src/mainboard/via/epia-m850/devicetree.cb
Normal file
@@ -0,0 +1,111 @@
|
|||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2011-2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
||||||
|
##
|
||||||
|
## This program is free software: you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation, either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU General Public License
|
||||||
|
## along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
##
|
||||||
|
|
||||||
|
chip northbridge/via/vx900 # Northbridge
|
||||||
|
register "assign_pex_to_dp" = "0"
|
||||||
|
register "pcie_port1_2_lane_wide" = "1"
|
||||||
|
register "ext_int_route_to_pirq" = "'H'"
|
||||||
|
|
||||||
|
device cpu_cluster 0 on # APIC cluster
|
||||||
|
chip cpu/via/nano # VIA NANO
|
||||||
|
device lapic 0 on end # APIC
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device domain 0 on
|
||||||
|
device pci 0.0 on end # [0410] Host controller
|
||||||
|
device pci 0.1 on end # [1410] Error Reporting
|
||||||
|
device pci 0.2 on end # [2410] CPU Bus Control
|
||||||
|
device pci 0.3 on end # [3410] DRAM Bus Control
|
||||||
|
device pci 0.4 on end # [4410] Power Management
|
||||||
|
device pci 0.5 on # [5410] APIC+Traffic Control
|
||||||
|
chip drivers/generic/ioapic
|
||||||
|
register "have_isa_interrupts" = "0"
|
||||||
|
register "irq_on_fsb" = "1"
|
||||||
|
register "enable_virtual_wire" = "1"
|
||||||
|
register "base" = "0xfecc0000"
|
||||||
|
device ioapic 2 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci 0.6 off end # [6410] Scratch Registers
|
||||||
|
device pci 0.7 on end # [7410] V4 Link Control
|
||||||
|
device pci 1.0 on # [7122] VGA Chrome9 HD
|
||||||
|
ioapic_irq 2 INTA 0x28
|
||||||
|
end
|
||||||
|
device pci 1.1 on # [9170] Audio Device
|
||||||
|
ioapic_irq 2 INTA 0x29
|
||||||
|
end
|
||||||
|
device pci 3.0 on end # [a410] PEX1
|
||||||
|
device pci 3.1 on end # [b410] PEX2
|
||||||
|
device pci 3.2 on end # [c410] PEX3
|
||||||
|
device pci 3.3 on end # [d410] PEX4
|
||||||
|
device pci 3.4 on end # [e410] PCIE bridge
|
||||||
|
device pci b.0 on end # [a409] USB Device
|
||||||
|
device pci c.0 off end # [95d0] SDIO Host Controller
|
||||||
|
device pci d.0 off end # [9530] Memory Card controller
|
||||||
|
device pci f.0 on # [9001] SATA Controller
|
||||||
|
ioapic_irq 1 INTA 0x15
|
||||||
|
end
|
||||||
|
device pci 10.0 on end # [3038] USB 1.1
|
||||||
|
device pci 10.1 on end # [3038] USB 1.1
|
||||||
|
device pci 10.2 on end # [3038] USB 1.1
|
||||||
|
device pci 10.3 on end # [3038] USB 1.1
|
||||||
|
device pci 10.4 on end # [3104] USB 2.0
|
||||||
|
device pci 11.0 on # [8410] LPC Bus Control
|
||||||
|
chip drivers/generic/ioapic
|
||||||
|
register "have_isa_interrupts" = "1"
|
||||||
|
register "irq_on_fsb" = "1"
|
||||||
|
register "enable_virtual_wire" = "1"
|
||||||
|
register "base" = "0xfec00000"
|
||||||
|
device ioapic 1 on end
|
||||||
|
end
|
||||||
|
#chip drivers/generic/generic # DIMM 0 channel 1
|
||||||
|
# device i2c 50 on end
|
||||||
|
#end
|
||||||
|
#chip drivers/generic/generic # DIMM 1 channel 1
|
||||||
|
# device i2c 51 on end
|
||||||
|
#end
|
||||||
|
chip superio/fintek/f81865f # Super duper IO
|
||||||
|
device pnp 4e.0 off end # Floppy
|
||||||
|
device pnp 4e.3 off end # Parallel Port
|
||||||
|
device pnp 4e.4 off end # Hardware Monitor
|
||||||
|
device pnp 4e.5 off end # Keyboard not here
|
||||||
|
device pnp 4e.6 off end # GPIO
|
||||||
|
device pnp 4e.a off end # PME
|
||||||
|
device pnp 4e.10 on # COM1
|
||||||
|
io 0x60 = 0x3f8
|
||||||
|
irq 0x70 = 4
|
||||||
|
end
|
||||||
|
device pnp 4e.11 on # COM2
|
||||||
|
io 0x60 = 0x2f8
|
||||||
|
irq 0x70 = 3
|
||||||
|
end
|
||||||
|
device pnp 4e.12 on # COM3
|
||||||
|
io 0x60 = 0x3e8
|
||||||
|
irq 0x70 = 10
|
||||||
|
end
|
||||||
|
device pnp 4e.13 on # COM4
|
||||||
|
io 0x60 = 0x2e8
|
||||||
|
irq 0x70 = 11
|
||||||
|
end
|
||||||
|
end # superio/fintek/f81865f
|
||||||
|
end # LPC
|
||||||
|
device pci 11.7 on end # [a353] North-South control
|
||||||
|
device pci 14.0 on end # [3288] Azalia HDAC
|
||||||
|
end
|
||||||
|
end
|
||||||
75
src/mainboard/via/epia-m850/irq_tables.c
Normal file
75
src/mainboard/via/epia-m850/irq_tables.c
Normal file
@@ -0,0 +1,75 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <arch/pirq_routing.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <string.h> /* <- For memset */
|
||||||
|
|
||||||
|
#define _OFF 0x00
|
||||||
|
#define ___OFF 0x0000
|
||||||
|
#define LNKA 1
|
||||||
|
#define LNKB 2
|
||||||
|
#define LNKC 3
|
||||||
|
#define LNKD 4
|
||||||
|
#define LNKE 5
|
||||||
|
#define LNKF 6
|
||||||
|
#define LNKG 7
|
||||||
|
#define LNKH 8
|
||||||
|
#define BITMAP 0xdce0
|
||||||
|
/* The link that carries the SATA interrupt has its own mask, just in case
|
||||||
|
* we want to make sure our SATA controller gets mapped to IRQ 14 */
|
||||||
|
#define B_SATA BITMAP
|
||||||
|
|
||||||
|
const struct irq_routing_table intel_irq_routing_table = {
|
||||||
|
PIRQ_SIGNATURE, /* u32 signature */
|
||||||
|
PIRQ_VERSION, /* u16 version */
|
||||||
|
32 + 16 * 13, /* Max. number of devices on the bus */
|
||||||
|
0x00, /* Interrupt router bus */
|
||||||
|
(0x11 << 3) | 0x0, /* Interrupt router dev */
|
||||||
|
0, /* IRQs devoted exclusively for PCI */
|
||||||
|
PCI_VENDOR_ID_VIA, /* Vendor */
|
||||||
|
PCI_DEVICE_ID_VIA_VX900_LPC, /* Device */
|
||||||
|
0, /* Miniport */
|
||||||
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
|
||||||
|
0x19, /* Checksum (has to be set to some value that
|
||||||
|
* would give 0 after the sum of all bytes
|
||||||
|
* for this structure (including checksum). */
|
||||||
|
{
|
||||||
|
/* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
|
||||||
|
{0x00, (0x01 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
|
||||||
|
{0x00, (0x03 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0},
|
||||||
|
{0x00, (0x0a << 3) | 0x0, {{LNKA, BITMAP}, {LNKB, B_SATA}, {LNKC, BITMAP}, {LNKD, BITMAP}}, 0x0, 0x0},
|
||||||
|
{0x00, (0x0b << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
|
||||||
|
{0x00, (0x0c << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
|
||||||
|
{0x00, (0x0d << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
|
||||||
|
{0x00, (0x0f << 3) | 0x0, {{LNKB, B_SATA}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
|
||||||
|
{0x00, (0x10 << 3) | 0x0, {{LNKA, BITMAP}, {LNKB, B_SATA}, {LNKC, BITMAP}, {LNKD, BITMAP}}, 0x0, 0x0},
|
||||||
|
{0x00, (0x14 << 3) | 0x0, {{LNKB, B_SATA}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
|
||||||
|
{0x01, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x1, 0x0},
|
||||||
|
{0x02, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x2, 0x0},
|
||||||
|
{0x03, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0},
|
||||||
|
{0x04, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0},
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
unsigned long write_pirq_routing_table(unsigned long addr)
|
||||||
|
{
|
||||||
|
return copy_pirq_routing_table(addr, &intel_irq_routing_table);
|
||||||
|
}
|
||||||
111
src/mainboard/via/epia-m850/mainboard.c
Normal file
111
src/mainboard/via/epia-m850/mainboard.c
Normal file
@@ -0,0 +1,111 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011 Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci_def.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
|
||||||
|
#if CONFIG_VGA_ROM_RUN
|
||||||
|
|
||||||
|
#include <arch/interrupt.h>
|
||||||
|
#include <x86emu/x86emu.h>
|
||||||
|
|
||||||
|
#include <northbridge/via/vx900/vx900.h>
|
||||||
|
|
||||||
|
static int vx900_int15_handler(void)
|
||||||
|
{
|
||||||
|
int res;
|
||||||
|
|
||||||
|
printk(BIOS_DEBUG, "%s %0x\n", __func__, X86_AX & 0xffff);
|
||||||
|
/* Set AX return value here so we don't set it every time. Just set it
|
||||||
|
* to something else if the callback is unsupported */
|
||||||
|
res = -1;
|
||||||
|
switch (X86_AX & 0xffff) {
|
||||||
|
#if 0
|
||||||
|
case 0x5f01:
|
||||||
|
/* VGA POST - panel type */
|
||||||
|
/* FIXME: Don't hardcode panel type */
|
||||||
|
/* Panel Type Number */
|
||||||
|
X86_CX = 0;
|
||||||
|
res = 0;
|
||||||
|
break;
|
||||||
|
case 0x5f02:
|
||||||
|
{
|
||||||
|
/* Boot device selection */
|
||||||
|
X86_BL = INT15_5F02_BL_HWOPT_CRTCONN;
|
||||||
|
/* FIXME: or 0 ? */
|
||||||
|
X86_BH = 0; // INT15_5F02_BH_TV_CONN_DEFAULT;
|
||||||
|
X86_EBX = 0; // INT15_5F02_EBX_HDTV_RGB;
|
||||||
|
X86_ECX = INT15_5F02_ECX_DISPLAY_CRT;
|
||||||
|
//X86_ECX |= INT15_5F02_ECX_TV_MODE_RGB;
|
||||||
|
//X86_ECX |= INT15_5F02_ECX_HDTV_1080P;
|
||||||
|
X86_DL = INT15_5F02_DL_TV_LAYOUT_DEFAULT;
|
||||||
|
res = 0;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
case 0x5f18:
|
||||||
|
X86_BL = vx900_int15_get_5f18_bl();
|
||||||
|
res = 0;
|
||||||
|
break;
|
||||||
|
#if 0
|
||||||
|
case 0x5f2a:
|
||||||
|
/* Get SSC Control Settings */
|
||||||
|
/* FIXME: No idea what this does. Just disable this feature
|
||||||
|
* for now */
|
||||||
|
X86_CX = INT15_5F2A_CX_SSC_ENABLE;
|
||||||
|
res = 0;
|
||||||
|
break;
|
||||||
|
case 0x5f2b:
|
||||||
|
/* Engine clock setting */
|
||||||
|
/* FIXME: ECLK fixed 250MHz ? */
|
||||||
|
X86_EBX = INT15_5F2B_EBX_ECLK_250MHZ;
|
||||||
|
break;
|
||||||
|
#endif
|
||||||
|
default:
|
||||||
|
printk(BIOS_DEBUG, "Unsupported INT15 call %04x!\n",
|
||||||
|
X86_AX & 0xffff);
|
||||||
|
X86_AX = 0;
|
||||||
|
res = -1;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (res == 0)
|
||||||
|
X86_AX = 0x5f;
|
||||||
|
else
|
||||||
|
X86_AX = 0;
|
||||||
|
return X86_AX;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
static void mainboard_enable(device_t dev)
|
||||||
|
{
|
||||||
|
(void)dev;
|
||||||
|
|
||||||
|
#if CONFIG_VGA_ROM_RUN
|
||||||
|
print_debug("Installing INT15 handler...\n");
|
||||||
|
mainboard_interrupt_handlers(0x15, &vx900_int15_handler);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
struct chip_operations mainboard_ops = {
|
||||||
|
CHIP_NAME("VIA EPIA-M850 Mainboard")
|
||||||
|
.enable_dev = mainboard_enable,
|
||||||
|
};
|
||||||
130
src/mainboard/via/epia-m850/romstage.c
Normal file
130
src/mainboard/via/epia-m850/romstage.c
Normal file
@@ -0,0 +1,130 @@
|
|||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011-2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Inspired from the EPIA-M700
|
||||||
|
*/
|
||||||
|
#undef CONFIG_COLLECT_TIMESTAMPS
|
||||||
|
#define CONFIG_COLLECT_TIMESTAMPS 1
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <device/pci_def.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <arch/io.h>
|
||||||
|
#include <device/pnp_def.h>
|
||||||
|
#include <arch/io.h>
|
||||||
|
#include <arch/hlt.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <lib.h>
|
||||||
|
#include <cpu/x86/bist.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include <timestamp.h>
|
||||||
|
#include <console/cbmem_console.h>
|
||||||
|
|
||||||
|
#include "northbridge/via/vx900/early_vx900.h"
|
||||||
|
#include "northbridge/via/vx900/raminit.h"
|
||||||
|
/* FIXME: This is the only .c include we couldn't get rid of */
|
||||||
|
#include "superio/fintek/f81865f/f81865f_early_serial.c"
|
||||||
|
|
||||||
|
#define SERIAL_DEV PNP_DEV(0x4e, 0x10)
|
||||||
|
|
||||||
|
static inline u64 tsc2u64(tsc_t tsc)
|
||||||
|
{
|
||||||
|
return ((u64) tsc.hi << 32) | tsc.lo;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* FIXME: This board comes in two flavours. This is for the faster CPU, but
|
||||||
|
* will probably not be correct for the other CPU */
|
||||||
|
#define TSC_PER_USEC 1297
|
||||||
|
static inline u32 tsc2ms(u64 end, u64 start)
|
||||||
|
{
|
||||||
|
return ((u32) (end - start) / TSC_PER_USEC) / 1000;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* cache_as_ram.inc jumps to here. */
|
||||||
|
void main(unsigned long bist)
|
||||||
|
{
|
||||||
|
u32 tolm;
|
||||||
|
u64 start, end;
|
||||||
|
tsc_t tsc_at_romstage_start = rdtsc();
|
||||||
|
|
||||||
|
/* First thing we need to do on the VX900, before anything else */
|
||||||
|
vx900_enable_pci_config_space();
|
||||||
|
|
||||||
|
/* Serial console is easy to take care of */
|
||||||
|
f81865f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
|
||||||
|
console_init();
|
||||||
|
print_debug("Console initialized. \n");
|
||||||
|
|
||||||
|
vx900_cpu_bus_interface_setup();
|
||||||
|
|
||||||
|
/* Be smart. Get this info */
|
||||||
|
vx900_print_strapping_info();
|
||||||
|
/* DEVEL helper */
|
||||||
|
vx900_disable_auto_reboot();
|
||||||
|
/* Halt if there was a built-in self test failure. */
|
||||||
|
report_bist_failure(bist);
|
||||||
|
|
||||||
|
/* Oh, almighty, give us the SMBUS */
|
||||||
|
enable_smbus();
|
||||||
|
|
||||||
|
tsc_t tsc_before_raminit = rdtsc();
|
||||||
|
/* Now we can worry about raminit.
|
||||||
|
* This board only has DDR3, so no need to worry about which DRAM type
|
||||||
|
* to use */
|
||||||
|
dimm_layout dimms = { {0x50, 0x51, SPD_END_LIST} };
|
||||||
|
vx900_init_dram_ddr3(&dimms);
|
||||||
|
tsc_t tsc_after_raminit = rdtsc();
|
||||||
|
|
||||||
|
/* TODO: All these ram_checks are here to ensure we test most of the RAM
|
||||||
|
* below 4G. They should not be needed once VX900 raminit is stable */
|
||||||
|
ram_check(0, 0x80);
|
||||||
|
ram_check(512 << 10, 0x80);
|
||||||
|
ram_check((1 << 20) - (1 << 10), 0x80);
|
||||||
|
ram_check((1 << 24), 0x80);
|
||||||
|
ram_check((512 + 256 - 1) << 20, 0x80);
|
||||||
|
ram_check(0x80c0000, 0x80);
|
||||||
|
tolm = ((pci_read_config16(MCU, 0x84) & 0xfff0) >> 4) << 20;
|
||||||
|
if (tolm > (1 * (u32) GiB))
|
||||||
|
ram_check(1024 << 10, 0x80);
|
||||||
|
if (tolm > (2 * (u32) GiB))
|
||||||
|
ram_check(2048 << 20, 0x80);
|
||||||
|
|
||||||
|
print_debug("We passed RAM verify\n");
|
||||||
|
#ifdef GONFIG_EARLY_CBMEM_INIT
|
||||||
|
/* We got RAM working, now we can write the timestamps to RAM */
|
||||||
|
cbmem_initialize();
|
||||||
|
timestamp_init(tsc_at_romstage_start);
|
||||||
|
timestamp_add(TS_START_ROMSTAGE, tsc_at_romstage_start);
|
||||||
|
timestamp_add(TS_BEFORE_INITRAM, tsc_before_raminit);
|
||||||
|
timestamp_add(TS_AFTER_INITRAM, tsc_after_raminit);
|
||||||
|
timestamp_add_now(TS_END_ROMSTAGE);
|
||||||
|
#endif
|
||||||
|
/* FIXME: See if this is needed or take this out please */
|
||||||
|
/* Disable Memcard and SDIO */
|
||||||
|
pci_mod_config8(LPC, 0x51, 0, (1 << 7) | (1 << 4));
|
||||||
|
|
||||||
|
/* Informative character. Could be removed at a later time. */
|
||||||
|
start = tsc2u64(tsc_at_romstage_start);
|
||||||
|
end = tsc2u64(tsc_before_raminit);
|
||||||
|
printk(BIOS_INFO, "Before raminit %ums\n", tsc2ms(end, start));
|
||||||
|
|
||||||
|
start = end;
|
||||||
|
end = tsc2u64(tsc_after_raminit);
|
||||||
|
printk(BIOS_INFO, "Actual Raminit %ums\n", tsc2ms(end, start));
|
||||||
|
}
|
||||||
Reference in New Issue
Block a user