ec/google/chromeec: Update ec_cmd_api.h and ec_commands.h

Generated using update_ec_headers.sh [EC-DIR].

The original include/ec_commands.h version in the EC repo is:
  d0771e49e7 MKBP: Increase key matrix size
The original include/ec_cmd_api.h version in the EC repo is:
  d0771e49e7 MKBP: Increase key matrix size

Change-Id: I4f3dfc3f145e50e6114894352cdc118ad5a9565b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82995
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/ec/google/chromeec/ec_cmd_api.h

@@ -236,6 +236,12 @@ static inline int ec_cmd_fp_template(CROS_EC_COMMAND_INFO *h,
  */
 #define _CROS_EC_C1_F_RF(_cmd, _fn) _CROS_EC_CV_F_R(_cmd, 1, _fn##_v1, _fn##_v1)
 
+/*
+ * Shorthand for host command version 3 where response name is derived
+ * from the function name and there is no param.
+ */
+#define _CROS_EC_C3_F_RF(_cmd, _fn) _CROS_EC_CV_F_R(_cmd, 3, _fn##_v3, _fn##_v3)
+
 /*
  * Shorthand for host command version 0 where response and there are no
  * params or response.
@@ -312,6 +318,7 @@ _CROS_EC_C0_F_RF(EC_CMD_GET_FEATURES, get_features);
 _CROS_EC_CV_F_R(EC_CMD_GET_KEYBD_CONFIG, 0, get_keybd_config, keybd_config);
 _CROS_EC_C0_F_RF(EC_CMD_GET_NEXT_EVENT, get_next_event);
 _CROS_EC_C1_F_RF(EC_CMD_GET_NEXT_EVENT, get_next_event);
+_CROS_EC_C3_F_RF(EC_CMD_GET_NEXT_EVENT, get_next_event);
 _CROS_EC_CV_F_R(EC_CMD_GET_NEXT_EVENT, 2, get_next_event_v2, get_next_event_v1);
 _CROS_EC_C0_F_PF_RF(EC_CMD_GET_PD_PORT_CAPS, get_pd_port_caps);
 _CROS_EC_C0_F_RF(EC_CMD_GET_PROTOCOL_INFO, get_protocol_info);
@@ -368,6 +375,8 @@ _CROS_EC_CV_F_P(EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT, 0,
 _CROS_EC_C0_F_RF(EC_CMD_PCHG_COUNT, pchg_count);
 _CROS_EC_CV_F_P(EC_CMD_PD_CHARGE_PORT_OVERRIDE, 0, pd_charge_port_override,
 		charge_port_override);
+_CROS_EC_CV_F_P_R(EC_CMD_PD_CHIP_INFO, 2, pd_chip_info_v2, pd_chip_info,
+		  pd_chip_info_v2);
 _CROS_EC_CV_F_P_R(EC_CMD_PD_CHIP_INFO, 1, pd_chip_info_v1, pd_chip_info,
 		  pd_chip_info_v1);
 _CROS_EC_C0_F_PF_RF(EC_CMD_PD_CHIP_INFO, pd_chip_info);
@@ -403,6 +412,7 @@ _CROS_EC_CV_F_P(EC_CMD_RTC_SET_VALUE, 0, rtc_set_value, rtc);
 _CROS_EC_C0_F_PF(EC_CMD_RWSIG_ACTION, rwsig_action);
 _CROS_EC_C0_F_RF(EC_CMD_RWSIG_CHECK_STATUS, rwsig_check_status);
 _CROS_EC_C0_F_RF(EC_CMD_RWSIG_INFO, rwsig_info);
+_CROS_EC_C0_F_PF(EC_CMD_SET_ALARM_SLP_S0_DBG, set_alarm_slp_s0_dbg);
 _CROS_EC_C0_F_PF(EC_CMD_SET_BASE_STATE, set_base_state);
 _CROS_EC_C0_F_PF(EC_CMD_SET_TABLET_MODE, set_tablet_mode);
 _CROS_EC_C0_F_PF_RF(EC_CMD_SMART_DISCHARGE, smart_discharge);

src/ec/google/chromeec/ec_commands.h

@@ -3970,6 +3970,11 @@ struct ec_result_keyscan_seq_ctrl {
  * Get the next pending MKBP event.
  *
  * Returns EC_RES_UNAVAILABLE if there is no event pending.
+ *
+ * V0: ec_response_get_next_data
+ * V1: ec_response_get_next_data_v1. Increased key_matrix size from 13 -> 16.
+ * V2: Added EC_MKBP_HAS_MORE_EVENTS.
+ * V3: ec_response_get_next_data_v3. Increased key_matrix size from 16 -> 18.
  */
 #define EC_CMD_GET_NEXT_EVENT 0x0067
 
@@ -4107,6 +4112,34 @@ union __ec_align_offset1 ec_response_get_next_data_v1 {
 };
 BUILD_ASSERT(sizeof(union ec_response_get_next_data_v1) == 16);
 
+union __ec_align_offset1 ec_response_get_next_data_v3 {
+	uint8_t key_matrix[18];
+
+	/* Unaligned */
+	uint32_t host_event;
+	uint64_t host_event64;
+
+	struct __ec_todo_unpacked {
+		/* For aligning the fifo_info */
+		uint8_t reserved[3];
+		struct ec_response_motion_sense_fifo_info info;
+	} sensor_fifo;
+
+	uint32_t buttons;
+
+	uint32_t switches;
+
+	uint32_t fp_events;
+
+	uint32_t sysrq;
+
+	/* CEC events from enum mkbp_cec_event */
+	uint32_t cec_events;
+
+	uint8_t cec_message[16];
+};
+BUILD_ASSERT(sizeof(union ec_response_get_next_data_v3) == 18);
+
 struct ec_response_get_next_event {
 	uint8_t event_type;
 	/* Followed by event data if any */
@@ -4119,6 +4152,12 @@ struct ec_response_get_next_event_v1 {
 	union ec_response_get_next_data_v1 data;
 } __ec_align1;
 
+struct ec_response_get_next_event_v3 {
+	uint8_t event_type;
+	/* Followed by event data if any */
+	union ec_response_get_next_data_v3 data;
+} __ec_align1;
+
 /* Bit indices for buttons and switches.*/
 /* Buttons */
 #define EC_MKBP_POWER_BUTTON 0
@@ -4587,6 +4626,9 @@ struct ec_params_console_read_v1 {
 	uint8_t subcmd; /* enum ec_console_read_subcmd */
 } __ec_align1;
 
+/* Print directly to EC console from host. */
+#define EC_CMD_CONSOLE_PRINT 0x00AC
+
 /*****************************************************************************/
 
 /*
@@ -5818,6 +5860,7 @@ struct ec_response_pd_status {
 #define PD_EVENT_IDENTITY_RECEIVED BIT(2)
 #define PD_EVENT_DATA_SWAP BIT(3)
 #define PD_EVENT_TYPEC BIT(4)
+#define PD_EVENT_PPM BIT(5)
 
 struct ec_response_host_event_status {
 	uint32_t status; /* PD MCU host event status */
@@ -6289,6 +6332,37 @@ struct ec_response_pd_chip_info_v1 {
 	} __ec_align2;
 } __ec_align2;
 
+/** Indicates the chip should NOT receive a firmware update, if set. This is
+ *  useful when multiple ports are serviced by a single chip, to avoid
+ *  performing redundant updates. The host command implementation shall ensure
+ *  only one port out of each physical chip has FW updates active.
+ */
+#define USB_PD_CHIP_INFO_FWUP_FLAG_NO_UPDATE BIT(0)
+
+/** Maximum length of a project name embedded in a PDC FW image. This length
+ *  does NOT include a NUL-terminator.
+ */
+#define USB_PD_CHIP_INFO_PROJECT_NAME_LEN 12
+struct ec_response_pd_chip_info_v2 {
+	uint16_t vendor_id;
+	uint16_t product_id;
+	uint16_t device_id;
+	union {
+		uint8_t fw_version_string[8];
+		uint64_t fw_version_number;
+	} __ec_align2;
+	union {
+		uint8_t min_req_fw_version_string[8];
+		uint64_t min_req_fw_version_number;
+	} __ec_align2;
+	/** Flag to control the FW update process for this chip. */
+	uint16_t fw_update_flags;
+	/** Project name string associated with the chip's FW. Add an extra
+	 *  byte for a NUL-terminator.
+	 */
+	char fw_name_str[USB_PD_CHIP_INFO_PROJECT_NAME_LEN + 1];
+} __ec_align2;
+
 /* Run RW signature verification and get status */
 #define EC_CMD_RWSIG_CHECK_STATUS 0x011C
 
@@ -6395,6 +6469,38 @@ struct ec_params_set_cbi {
 	uint8_t data[]; /* For string and raw data */
 } __ec_align1;
 
+/*
+ * Retrieve binary from CrOS Board Info primary memory source.
+ */
+#define EC_CMD_CBI_BIN_READ 0x0504
+/*
+ * Write binary into CrOS Board Info temporary buffer and then commit it to
+ * permanent storage once complete. Write fails if the board has hardware
+ * write-protect enabled.
+ */
+#define EC_CMD_CBI_BIN_WRITE 0x0505
+
+/*
+ * CBI binary read/write flags
+ * The default write behavior is to always append any data to the buffer.
+ * If 'CLEAR' flag is set, buffer is cleared then data is appended.
+ * If 'WRITE' flag is set, data is appended then buffer is written to memory.
+ */
+#define EC_CBI_BIN_BUFFER_CLEAR BIT(0)
+#define EC_CBI_BIN_BUFFER_WRITE BIT(1)
+
+struct ec_params_get_cbi_bin {
+	uint32_t offset; /* Data offset */
+	uint32_t size; /* Data size */
+} __ec_align4;
+
+struct ec_params_set_cbi_bin {
+	uint32_t offset; /* Data offset */
+	uint32_t size; /* Data size */
+	uint8_t flags; /* bit field for EC_CBI_BIN_COMMIT_FLAG_* */
+	uint8_t data[]; /* For string and raw data */
+} __ec_align1;
+
 /*
  * Information about resets of the AP by the EC and the EC's own uptime.
  */
@@ -6798,6 +6904,8 @@ enum action_key {
 	TK_MICMUTE = 19,
 	TK_MENU = 20,
 	TK_DICTATE = 21,
+	TK_ACCESSIBILITY = 22,
+	TK_DONOTDISTURB = 23,
 
 	TK_COUNT
 };
@@ -7856,6 +7964,36 @@ struct ec_params_ap_fw_state {
 	uint32_t state;
 } __ec_align1;
 
+/*
+ * UCSI OPM-PPM commands
+ *
+ * These commands are used for communication between OPM and PPM.
+ * Only UCSI3.0 is tested.
+ */
+
+#define EC_CMD_UCSI_PPM_SET 0x0140
+
+/* The data size is stored in the host command protocol header. */
+struct ec_params_ucsi_ppm_set {
+	uint16_t offset;
+	uint8_t data[];
+} __ec_align2;
+
+#define EC_CMD_UCSI_PPM_GET 0x0141
+
+/* For 'GET' sub-commands, data will be returned as a raw payload. */
+struct ec_params_ucsi_ppm_get {
+	uint16_t offset;
+	uint8_t size;
+} __ec_align2;
+
+#define EC_CMD_SET_ALARM_SLP_S0_DBG 0x0142
+
+/* RTC params and response structures */
+struct ec_params_set_alarm_slp_s0_dbg {
+	uint32_t time;
+} __ec_align2;
+
 /*****************************************************************************/
 /* The command range 0x200-0x2FF is reserved for Rotor. */
 
@@ -8023,7 +8161,8 @@ struct ec_response_fp_info {
 
 /* Constants for encryption parameters */
 #define FP_CONTEXT_NONCE_BYTES 12
-#define FP_CONTEXT_USERID_WORDS (32 / sizeof(uint32_t))
+#define FP_CONTEXT_USERID_BYTES 32
+#define FP_CONTEXT_USERID_WORDS (FP_CONTEXT_USERID_BYTES / sizeof(uint32_t))
 #define FP_CONTEXT_TAG_BYTES 16
 #define FP_CONTEXT_ENCRYPTION_SALT_BYTES 16
 #define FP_CONTEXT_TPM_BYTES 32
@@ -8255,6 +8394,21 @@ struct ec_params_fp_unlock_template {
 	uint16_t fgr_num;
 } __ec_align4;
 
+/*
+ * Migrate a legacy FP template (here, legacy refers to being generated in a
+ * raw user_id context instead of a nonce context) by wiping its match secret
+ * salt and treating it as a newly-enrolled template.
+ * The legacy FP template needs to be uploaded by FP_TEMPLATE command first
+ * without committing, then this command will commit it.
+ */
+#define EC_CMD_FP_MIGRATE_TEMPLATE_TO_NONCE_CONTEXT 0x0418
+
+struct ec_params_fp_migrate_template_to_nonce_context {
+	/* The context userid used to encrypt this template when it was created.
+	 */
+	uint32_t userid[FP_CONTEXT_USERID_WORDS];
+};
+
 /*****************************************************************************/
 /* Touchpad MCU commands: range 0x0500-0x05FF */