src: Fix typo

Change-Id: I689c5663ef59861f79b68220abd146144f7618de
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>

src/soc/broadcom/cygnus/include/soc/shmoo_and28/phy_and28_e2.h

@@ -38,7 +38,7 @@
 #endif /* GET & SET */
 
 /***************************************************************************
- *DDR34_CORE_PHY_CONTROL_REGS - DDR34 CORE DDR34 Address/Comand control registers
+ *DDR34_CORE_PHY_CONTROL_REGS - DDR34 CORE DDR34 Address/Command control registers
  ***************************************************************************/
 #define DDR34_CORE_PHY_CONTROL_REGS_REVISION     0x00000000 /* Address & Control revision register */
 #define DDR34_CORE_PHY_CONTROL_REGS_PLL_STATUS   0x00000004 /* PHY PLL status register */

src/soc/intel/cannonlake/reset.c

@@ -74,7 +74,7 @@ static int send_heci_reset_message(void)
 		printk(BIOS_DEBUG, "Returned Mkhi Status is not success!\n");
 		return -1;
 	}
-	printk(BIOS_DEBUG, "Heci recieve success!\n");
+	printk(BIOS_DEBUG, "Heci receive success!\n");
 	return 0;
 }
 

src/soc/intel/common/block/cse/cse.c

@@ -443,7 +443,7 @@ int heci_receive(void *buff, size_t *maxlen)
 		do {
 			received = recv_one_message(&hdr, p, left);
 			if (!received) {
-				printk(BIOS_ERR, "HECI: Failed to recieve!\n");
+				printk(BIOS_ERR, "HECI: Failed to receive!\n");
 				return 0;
 			}
 			left -= received;

src/soc/intel/skylake/bootblock/pch.c

@@ -124,7 +124,7 @@ static void soc_config_tco(void)
 	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32);
 
 	/* Program TCO Base */
-	pci_write_config32(PCH_DEV_SMBUS, TCOBASE, TCO_BASE_ADDDRESS);
+	pci_write_config32(PCH_DEV_SMBUS, TCOBASE, TCO_BASE_ADDRESS);
 
 	/* Enable TCO in SMBUS */
 	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32 | TCO_EN);
@@ -133,7 +133,7 @@ static void soc_config_tco(void)
 	 * Program "TCO Base Address" PCR[DMI] + 2778h[15:5, 1]
 	 * to [SMBUS PCI offset 50h[15:5], 1].
 	 */
-	pcr_write32(PID_DMI, PCR_DMI_TCOBASE, TCO_BASE_ADDDRESS | (1 << 1));
+	pcr_write32(PID_DMI, PCR_DMI_TCOBASE, TCO_BASE_ADDRESS | (1 << 1));
 
 	/* Program TCO timer halt */
 	tcobase = pci_read_config16(PCH_DEV_SMBUS, TCOBASE);

src/soc/intel/skylake/include/soc/iomap.h

@@ -87,7 +87,7 @@
 #define ACPI_BASE_ADDRESS	0x1800
 #define ACPI_BASE_SIZE		0x100
 
-#define TCO_BASE_ADDDRESS	0x400
+#define TCO_BASE_ADDRESS	0x400
 #define TCO_BASE_SIZE		0x20
 
 #define P2SB_BAR		CONFIG_PCR_BASE_ADDRESS

src/soc/rockchip/common/include/soc/spi.h

@@ -101,9 +101,9 @@ check_member(rockchip_spi, rxdr, 0x800);
 /* SSN to Sclk_out delay */
 #define SPI_SSN_DELAY_OFFSET	10
 #define SPI_SSN_DELAY_MASK	0x1
-/* the peroid between ss_n active and sclk_out active is half sclk_out cycles */
+/* the period between ss_n active and sclk_out active is half sclk_out cycles */
 #define SPI_SSN_DELAY_HALF	0x00
-/* the peroid between ss_n active and sclk_out active is one sclk_out cycle */
+/* the period between ss_n active and sclk_out active is one sclk_out cycle */
 #define SPI_SSN_DELAY_ONE	0x01
 
 /* Serial Endian Mode */

src/soc/samsung/exynos5420/include/soc/memlayout.ld

@@ -26,7 +26,7 @@ SECTIONS
 {
 	SRAM_START(0x2020000)
 	/* 17K hole, includes BL1 */
-	/* Bootblock is preceeded by 16 byte variable length BL2 checksum. */
+	/* Bootblock is preceded by 16 byte variable length BL2 checksum. */
 	BOOTBLOCK(0x2024410, 32K - 16)
 	/* 15K hole */
 	ROMSTAGE(0x2030000, 128K)

src/soc/samsung/exynos5420/include/soc/setup.h

@@ -729,7 +729,7 @@ struct exynos5_phy_control;
 #define CTRL_RDLAT_OFFSET	0
 
 #define CMD_DEFAULT_LPDDR3	0xF
-#define CMD_DEFUALT_OFFSET	0
+#define CMD_DEFAULT_OFFSET	0
 #define T_WRDATA_EN		0x7
 #define T_WRDATA_EN_DDR3	0x8	/* FIXME(dhendrix): 6 for DDR3? see T_wrdata_en */
 #define T_WRDATA_EN_OFFSET	16