glados: make EC_SCI_L work

In order for the EC_SCI_L to work the GPE0 route needs
to be set along w/ the GPE event for the EC. As the GPE0
route is dynamic the EC_SCI_GPI needs to be set along
with the route so everything lines up. In this case, the
GPE0 route is set to the defaults such that GPP_C, GPP_D,
and GPP_E are routed to GPE0 block 0, 1, and 2, respectively.
This works out for glados because the EC_SCI_L is connected
to GPP_E16.

BUG=chrome-os-partner:43778
BRANCH=None
TEST=Built and booted glados. The 'acpi' interrupt in /proc/interrupts
     is incrementing as well as /sys/firmware/acpi/interrupts/gpe50.

Original-Change-Id: I71fc4bec124f3ac87453a099412154e67aba6280
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/292011
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>

Change-Id: Idbb6d29364655537abc9ae6f012b3abb38edf138
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11210
Tested-by: build bot (Jenkins)
This commit is contained in:
Aaron Durbin
2015-08-09 14:45:02 -05:00
parent 50ed38feba
commit 3d7020e0c4
3 changed files with 13 additions and 3 deletions

View File

@@ -135,7 +135,7 @@ static const struct pad_config gpio_table[] = {
/* DDPB_HPD0 */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1),
/* DDPC_HPD1 */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
/* DDPD_HPD2 */ PAD_CFG_GPI_ACPI_SMI(GPP_E15, NONE, DEEP, YES), /* EC_SMI_L */
/* DDPE_HPD3 */ PAD_CFG_NF(GPP_E16, NONE, DEEP, NF1),
/* DDPE_HPD3 */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, DEEP, YES), /* EC_SCI_L */
/* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1),
/* DDPB_CTRLCLK */ /* GPP_E18 */
/* DDPB_CTRLDATA */ /* GPP_E19 */