sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Exynos5420: ddr3: fine tuning the DDR3 timing values

Browse Source 
Fine tuning DDR timings value for better stability

* Changed Data Driver Strength from 34 ohms to 30 ohms, expected to
  enhance signal integrity.
* Changed DQ signal from 0xf to 0x1f000f, to keep default value safe.
* Changed mrs[2] and added new mrs direct command for setting WL/RL
  without resetting DLL.
* Added explicit reset value write in phy_con0 instead of just setting
  a bit, to ensure that reset happens.
* Added DREX automatic control for ctrl_pd in none read memory state.

This is ported from: https://gerrit.chromium.org/gerrit/61405
Signed-off-by: David Hendricks <dhendrix@chromium.org>

Change-Id: I59e96e6dede7b49c6572548aca664d82ad110bb1
Reviewed-on: https://chromium-review.googlesource.com/66995
Reviewed-by: ron minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ec34b711c6d270672c56d45c370ca14c0aa27ca3)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6611
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This commit is contained in:
David Hendricks
2013-08-26 15:12:12 -07:00
committed by Isaac Christensen
parent 4610f0e64f
commit 42b1b8069c
4 changed files with 25 additions and 18 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
src/cpu/samsung/exynos5420/dmc.h
View File

@@ -291,7 +291,7 @@ enum mem_manuf {
};
enum {
MEM_TIMINGS_MSR_COUNT = 4,
MEM_TIMINGS_MSR_COUNT = 5,
};

34
src/cpu/samsung/exynos5420/dmc_init_ddr3.c
View File

@@ -99,8 +99,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
*/
val = (0x7 << CA_CK_DRVR_DS_OFFSET) | (0x7 << CA_CKE_DRVR_DS_OFFSET) |
(0x7 << CA_CS_DRVR_DS_OFFSET) | (0x7 << CA_ADR_DRVR_DS_OFFSET);
val |= (0x6 << DA_3_DS_OFFSET) | (0x6 << DA_2_DS_OFFSET) |
(0x6 << DA_1_DS_OFFSET) | (0x6 << DA_0_DS_OFFSET);
val |= (0x7 << DA_3_DS_OFFSET) | (0x7 << DA_2_DS_OFFSET) |
(0x7 << DA_1_DS_OFFSET) | (0x7 << DA_0_DS_OFFSET);
writel(val, &phy0_ctrl->phy_con39);
writel(val, &phy1_ctrl->phy_con39);
@@ -112,8 +112,12 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
clrbits_le32(&phy1_ctrl->phy_con16, ZQ_CLK_DIV_EN);
/* DQ Signal */
writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14);
writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14);
val = readl(&phy0_ctrl->phy_con14);
val |= mem->phy0_pulld_dqs;
writel(val, &phy0_ctrl->phy_con14);
val = readl(&phy1_ctrl->phy_con14);
val |= mem->phy1_pulld_dqs;
writel(val, &phy1_ctrl->phy_con14);
val = MEM_TERM_EN | PHY_TERM_EN;
writel(val, &drex0->phycontrol0);
@@ -225,8 +229,8 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
if (mem->gate_leveling_enable) {
setbits_le32(&phy0_ctrl->phy_con0, CTRL_ATGATE);
setbits_le32(&phy1_ctrl->phy_con0, CTRL_ATGATE);
writel(PHY_CON0_RESET_VAL, &phy0_ctrl->phy_con0);
writel(PHY_CON0_RESET_VAL, &phy1_ctrl->phy_con0);
setbits_le32(&phy0_ctrl->phy_con0, P0_CMD_EN);
setbits_le32(&phy1_ctrl->phy_con0, P0_CMD_EN);
@@ -236,12 +240,6 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
writel(val, &phy0_ctrl->phy_con2);
writel(val, &phy1_ctrl->phy_con2);
val = PHY_CON0_RESET_VAL;
val |= P0_CMD_EN;
val |= BYTE_RDLVL_EN;
writel(val, &phy0_ctrl->phy_con0);
writel(val, &phy1_ctrl->phy_con0);
val = readl(&phy0_ctrl->phy_con1);
val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
writel(val, &phy0_ctrl->phy_con1);
@@ -339,12 +337,18 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
writel(mem->memcontrol, &drex0->memcontrol);
writel(mem->memcontrol, &drex1->memcontrol);
/* Set DMC Concontrol and enable auto-refresh counter */
/*
* Set DMC Concontrol: Enable auto-refresh counter, provide
* read data fetch cycles and enable DREX auto set powerdown
* for input buffer of I/O in none read memory state.
*/
writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
DMC_CONCONTROL_IO_PD_CON(0x2),
&drex0->concontrol);
writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
DMC_CONCONTROL_IO_PD_CON(0x2),
&drex1->concontrol);
/* Enable Clock Gating Control for DMC

2
src/cpu/samsung/exynos5420/setup.h
View File

@@ -181,6 +181,8 @@ struct exynos5_phy_control;
#define CLK_DIV_FSYS1_VAL 0x04f13c4f
#define CLK_DIV_FSYS2_VAL 0x041d0000
#define DMC_CONCONTROL_IO_PD_CON(x) (x << 6)
/* CLK_DIV_CPU1 */
#define HPM_RATIO 0x2
#define COPY_RATIO 0x0

5
src/mainboard/google/pit/memory.c
View File

@@ -32,7 +32,8 @@ const struct mem_timings mem_timings = {
.mem_type = DDR_MODE_DDR3,
.frequency_mhz = 800,
.direct_cmd_msr = {
0x00020018, 0x00030000, 0x00010002, 0x00000d70
0x00020018, 0x00030000, 0x00010046, 0x00000d70,
0x00000c70
},
.timing_ref = 0x000000bb,
.timing_row = 0x6836650f,
@@ -65,7 +66,7 @@ const struct mem_timings mem_timings = {
.rd_fetch = 0x3,
.zq_mode_dds = 0x6,
.zq_mode_dds = 0x7,
.zq_mode_term = 0x1,
.zq_mode_noterm = 1,