src: Make PCI ID define names shorter

Shorten define names containing PCI_{DEVICE,VENDOR}_ID_ with
PCI_{DID,VID}_ using the commands below, which also take care of some
spacing issues. An additional clean up of pci_ids.h is done in
CB:61531.

Used commands:
* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]\{2\}\([_0-9A-Za-z]\{8\}\)*[_0-9A-Za-z]\{0,5\}\)\t/PCI_\1ID_\3\t\t/g'

* find -type f -exec sed -i 's/PCI_\([DV]\)\(EVICE\|ENDOR\)_ID_\([_0-9A-Za-z]*\)/PCI_\1ID_\3/g'

Change-Id: If9027700f53b6d0d3964c26a41a1f9b8f62be178
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>

src/soc/intel/quark/ehci.c

@@ -114,6 +114,6 @@ static struct device_operations device_ops = {
 
 static const struct pci_driver driver __pci_driver = {
 	.ops	= &device_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
+	.vendor	= PCI_VID_INTEL,
 	.device	= EHCI_DEVID,
 };

src/soc/intel/quark/gpio_i2c.c

@@ -24,6 +24,6 @@ static struct device_operations device_ops = {
 
 static const struct pci_driver gfx_driver __pci_driver = {
 	.ops	= &device_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
+	.vendor	= PCI_VID_INTEL,
 	.device	= I2CGPIO_DEVID,
 };

src/soc/intel/quark/lpc.c

@@ -43,6 +43,6 @@ static struct device_operations device_ops = {
 
 static const struct pci_driver pmc __pci_driver = {
 	.ops	= &device_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
+	.vendor	= PCI_VID_INTEL,
 	.device	= QUARK_V_LPC_DEVICE_ID_0,
 };

src/soc/intel/quark/northcluster.c

@@ -63,6 +63,6 @@ static struct device_operations nc_ops = {
 
 static const struct pci_driver systemagent_driver __pci_driver = {
 	.ops	= &nc_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
+	.vendor	= PCI_VID_INTEL,
 	.device	= QUARK_MC_DEVICE_ID
 };

src/soc/intel/quark/sd.c

@@ -30,6 +30,6 @@ static const struct device_operations device_ops = {
 
 static const struct pci_driver pmc __pci_driver = {
 	.ops	= &device_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
+	.vendor	= PCI_VID_INTEL,
 	.device	= 0x08A7,
 };

src/soc/intel/quark/spi.c

@@ -224,7 +224,7 @@ void spi_init(void)
 
 	/* Determine the base address of the SPI flash controller */
 	context = &spi_driver_context;
-	dev = dev_find_device(PCI_VENDOR_ID_INTEL, LPC_DEVID, NULL);
+	dev = dev_find_device(PCI_VID_INTEL, LPC_DEVID, NULL);
 	rcba = pci_read_config32(dev, R_QNC_LPC_RCBA);
 	if (!(rcba & B_QNC_LPC_RCBA_EN)) {
 		printk(BIOS_ERR, "RBCA not enabled\n");

src/soc/intel/quark/uart.c

@@ -28,6 +28,6 @@ static struct device_operations device_ops = {
 
 static const struct pci_driver uart_driver __pci_driver = {
 	.ops	= &device_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
+	.vendor	= PCI_VID_INTEL,
 	.device	= HSUART_DEVID,
 };