no warnings days.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5493 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/drivers/ati/ragexl/atyfb.h

@@ -1,24 +1,11 @@
-
 /*
  *  ATI Frame Buffer Device Driver Core Definitions
  */
-#define u32 uint32_t
+	
-#define u16 uint16_t
+#define PLL_CRTC_DECODE 0
-#define u8 uint8_t
-
-#define u_int uint32_t
 
 #define EINVAL -1
 
-#define readb(addr) (*(volatile unsigned char *) (addr))
-#define readw(addr) (*(volatile unsigned short *) (addr))
-#define readl(addr) (*(volatile unsigned int *) (addr))
-
-#define writeb(b,addr) (*(volatile unsigned char *) (addr) = (b))
-#define writew(b,addr) (*(volatile unsigned short *) (addr) = (b))
-#define writel(b,addr) (*(volatile unsigned int *) (addr) = (b))
-
-
 #define max(x,y) (x>=y)?x:y
 
 #if CONFIG_CONSOLE_BTEXT==1
@@ -226,7 +213,7 @@ static inline u32 aty_ld_le32(int regindex,
 #ifdef ATARI
     return in_le32((volatile u32 *)(info->ati_regbase+regindex));
 #else
-    return readl (info->ati_regbase + regindex);
+    return read32 (info->ati_regbase + regindex);
 #endif
 }
 
@@ -240,7 +227,7 @@ static inline void aty_st_le32(int regindex, u32 val,
 #ifdef ATARI
     out_le32 (info->ati_regbase+regindex, val);
 #else
-    writel (val, info->ati_regbase + regindex);
+    write32 (info->ati_regbase + regindex, val);
 #endif
 }
 
@@ -254,7 +241,7 @@ static inline u16 aty_ld_le16(int regindex,
 #if defined(__mc68000__)
     return le16_to_cpu(*((volatile u16 *)(info->ati_regbase+regindex)));
 #else
-    return readw (info->ati_regbase + regindex);
+    return read16 (info->ati_regbase + regindex);
 #endif
 }
 
@@ -268,7 +255,7 @@ static inline void aty_st_le16(int regindex, u16 val,
 #if defined(__mc68000__)
     *((volatile u16 *)(info->ati_regbase+regindex)) = cpu_to_le16(val);
 #else
-    writew (val, info->ati_regbase + regindex);
+    write16 (info->ati_regbase + regindex, val);
 #endif
 }
 
@@ -282,7 +269,7 @@ static inline u8 aty_ld_8(int regindex,
 #ifdef ATARI
     return in_8 (info->ati_regbase + regindex);
 #else
-    return readb (info->ati_regbase + regindex);
+    return read8 (info->ati_regbase + regindex);
 #endif
 }
 
@@ -296,7 +283,7 @@ static inline void aty_st_8(int regindex, u8 val,
 #ifdef ATARI
     out_8 (info->ati_regbase + regindex, val);
 #else
-    writeb (val, info->ati_regbase + regindex);
+    write8 (info->ati_regbase + regindex, val);
 #endif
 }
 
@@ -407,8 +394,8 @@ static inline void wait_for_idle(struct fb_info_aty *info)
 extern void aty_reset_engine(const struct fb_info_aty *info);
 extern void aty_init_engine(const struct atyfb_par *par,
 			    struct fb_info_aty *info);
-extern void aty_rectfill(int dstx, int dsty, u_int width, u_int height,
+extern void aty_rectfill(int dstx, int dsty, u32 width, u32 height,
-			 u_int color, struct fb_info_aty *info);
+			 u32 color, struct fb_info_aty *info);
 
 
     /*

src/drivers/ati/ragexl/fbcon.h

@@ -11,11 +11,8 @@
 #ifndef _VIDEO_FBCON_H
 #define _VIDEO_FBCON_H
 
-
-
 struct display {
     /* Filled in by the frame buffer device */
-
     struct fb_var_screeninfo var;   /* variable infos. yoffset and vmode */
                                     /* are updated by fbcon.c */
     struct fb_cmap cmap;            /* colormap */
@@ -29,19 +26,10 @@ struct display {
     u32 line_length;             /* length of a line in bytes */
     u16 can_soft_blank;         /* zero if no hardware blanking */
     u16 inverse;                /* != 0 text black on white as default */
-//    struct display_switch *dispsw;  /* low level operations */
-//    void *dispsw_data;              /* optional dispsw helper data */
-
-#if 0
-    struct fb_fix_cursorinfo fcrsr;
-    struct fb_var_cursorinfo *vcrsr;
-    struct fb_cursorstate crsrstate;
-#endif
 
     /* Filled in by the low-level console driver */
 
     struct vc_data *conp;           /* pointer to console data */
-//    struct fb_info *fb_info;        /* frame buffer for this console */
     int vrows;                      /* number of virtual rows */
     unsigned short cursor_x;        /* current cursor position */
     unsigned short cursor_y;
@@ -148,29 +136,4 @@ struct display {
 /* Namespace consistency */
 #define SCROLL_YNOPARTIAL	__SCROLL_YNOPARTIAL
 
-
-#if defined(__i386__) || defined(__alpha__) || \
-      defined(__x86_64__) || defined(__hppa__) || \
-      defined(__powerpc64__)
-
-#define fb_readb __raw_readb
-#define fb_readw __raw_readw
-#define fb_readl __raw_readl
-#define fb_writeb __raw_writeb
-#define fb_writew __raw_writew
-#define fb_writel __raw_writel
-#define fb_memset memset_io
-
-#else
-
-#define fb_readb(addr) (*(volatile u8 *) (addr))
-#define fb_readw(addr) (*(volatile u16 *) (addr))
-#define fb_readl(addr) (*(volatile u32 *) (addr))
-#define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b))
-#define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b))
-#define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b))
-#define fb_memset memset
-
-#endif
-
 #endif /* _VIDEO_FBCON_H */

src/drivers/ati/ragexl/xlinit.c

@@ -1429,10 +1429,10 @@ static int atyfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 #else
     scale = (M64_HAS(INTEGRATED) && info->default_par.crtc.bpp == 16) ? 3 : 0;
 #endif
-    writeb(regno << scale, &info->aty_cmap_regs->windex);
+    write8(&info->aty_cmap_regs->windex, regno << scale)
-    writeb(red, &info->aty_cmap_regs->lut);
+    write8(&info->aty_cmap_regs->lut, red);
-    writeb(green, &info->aty_cmap_regs->lut);
+    write8(&info->aty_cmap_regs->lut, green);
-    writeb(blue, &info->aty_cmap_regs->lut);
+    write8(&info->aty_cmap_regs->lut, blue);
     return 0;
 }
 

src/mainboard/intel/jarrell/jarrell_fixups.c

@@ -4,7 +4,7 @@ static void mch_reset(void)
 {
         device_t dev;
         unsigned long value, base;
-        dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
+        dev = pci_locate_device_on_bus(PCI_ID(0x8086, 0x24d0), 0);
         if (dev != PCI_DEV_INVALID) {
                 /* I/O space is always enables */
 
@@ -30,8 +30,6 @@ static void mch_reset(void)
         return;
 }
 
-
-
 static void mainboard_set_e7520_pll(unsigned bits)
 {
 	uint16_t gpio_index;
@@ -64,14 +62,13 @@ static void mainboard_set_e7520_pll(unsigned bits)
 		outb((data & 0xeb) | ((bits&2)?0:1)<<4 | ((bits&1)?0:1)<<2, gpio_index + PC87427_GPDO_4);
 		/* reset */
 		print_debug("set_pllsel: settings adjusted, now resetting...\n");
-	//	hard_reset(); /* should activate a PCI_RST, which should reset MCH, but it doesn't seem to work ???? */
+		// hard_reset(); /* should activate a PCI_RST, which should reset MCH, but it doesn't seem to work ???? */
-//		mch_reset();
+		// mch_reset();
 		full_reset();
 	}
 	return; 
 }
 
-
 static void mainboard_set_e7520_leds(void)
 {
 	uint8_t cnt;
@@ -118,6 +115,3 @@ static void mainboard_set_e7520_leds(void)
 	return; 
 }
 
-
-
-

src/mainboard/intel/jarrell/reset.c

@@ -1,6 +1,6 @@
 #include <arch/io.h>
-#include <reset.h>
 #include <arch/romcc_io.h>
+#include <reset.h>
 
 void soft_reset(void)
 {
@@ -13,6 +13,11 @@ void hard_reset(void)
         outb(0x06, 0xcf9);
 }
 
+#ifndef __ROMCC__
+/* Used only board-internally by power_reset_check.c and jarell_fixups.c */
+void full_reset(void);
+#endif
+
 void full_reset(void)
 {
 	/* Enable power on after power fail... */
@@ -20,7 +25,7 @@ void full_reset(void)
 	byte = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
 	byte &= 0xfe;
 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, byte);
+
         outb(0x0e, 0xcf9);
 }
 
-

src/mainboard/intel/xe7501devkit/reset.c

@@ -1,6 +1,6 @@
 #include <reset.h>
 
-void i82801cx_hard_reset(void);
+#include "southbridge/intel/i82801cx/i82801cx.h"
 
 void hard_reset(void)
 {

src/southbridge/amd/amd8111/amd8111_early_smbus.c

@@ -26,22 +26,23 @@ static void enable_smbus(void)
 	print_spew("SMBus controller enabled\n");
 }
 
-static int smbus_recv_byte(unsigned device)
+static inline int smbus_recv_byte(unsigned device)
 {
 	return do_smbus_recv_byte(SMBUS_IO_BASE, device);
 }
 
-static int smbus_send_byte(unsigned device, unsigned char val)
+static inline int smbus_send_byte(unsigned device, unsigned char val)
 {
 	return do_smbus_send_byte(SMBUS_IO_BASE, device, val);
 }
 
-static int smbus_read_byte(unsigned device, unsigned address)
+static inline int smbus_read_byte(unsigned device, unsigned address)
 {
 	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 
-static int smbus_write_byte(unsigned device, unsigned address, unsigned char val)
+static inline int smbus_write_byte(unsigned device, unsigned address, unsigned char val)
 {
 	return do_smbus_write_byte(SMBUS_IO_BASE, device, address, val);
 }
+

src/southbridge/amd/cs5536/cs5536_smbus2.h

@@ -253,18 +253,16 @@ static void _doread(unsigned smbus_io_base, unsigned char device,
 	printk(BIOS_DEBUG, "SMBUS READ ERROR (%d): %d\n", index, ret);
 }
 
-static unsigned char do_smbus_read_byte(unsigned smbus_io_base,
+static inline unsigned char do_smbus_read_byte(unsigned smbus_io_base,
-					unsigned char device,
+		unsigned char device, unsigned char address)
-					unsigned char address)
 {
 	unsigned char val = 0;
 	_doread(smbus_io_base, device, address, &val, sizeof(val));
 	return val;
 }
 
-static unsigned short do_smbus_read_word(unsigned smbus_io_base,
+static inline unsigned short do_smbus_read_word(unsigned smbus_io_base,
-					 unsigned char device,
+		 unsigned char device, unsigned char address)
-					 unsigned char address)
 {
 	unsigned short val = 0;
 	_doread(smbus_io_base, device, address, (unsigned char *)&val,
@@ -304,15 +302,15 @@ static int _dowrite(unsigned smbus_io_base, unsigned char device,
 	return -1;
 }
 
-static int do_smbus_write_byte(unsigned smbus_io_base, unsigned char device,
+static inline int do_smbus_write_byte(unsigned smbus_io_base,
-			       unsigned char address, unsigned char data)
+		unsigned char device, unsigned char address, unsigned char data)
 {
 	return _dowrite(smbus_io_base, device, address,
 			(unsigned char *)&data, 1);
 }
 
-static int do_smbus_write_word(unsigned smbus_io_base, unsigned char device,
+static inline int do_smbus_write_word(unsigned smbus_io_base, 
-			       unsigned char address, unsigned short data)
+		unsigned char device, unsigned char address, unsigned short data)
 {
 	return _dowrite(smbus_io_base, device, address, (unsigned char *)&data,
 			2);

src/southbridge/broadcom/bcm5785/bcm5785_early_smbus.c

@@ -25,21 +25,22 @@ static void enable_smbus(void)
 	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
 }
 
-static int smbus_recv_byte(unsigned device)
+static inline int smbus_recv_byte(unsigned device)
 {
         return do_smbus_recv_byte(SMBUS_IO_BASE, device);
 }
 
-static int smbus_send_byte(unsigned device, unsigned char val)
+static inline int smbus_send_byte(unsigned device, unsigned char val)
 {
         return do_smbus_send_byte(SMBUS_IO_BASE, device, val);
 }
 
-static int smbus_read_byte(unsigned device, unsigned address)
+static inline int smbus_read_byte(unsigned device, unsigned address)
 {
         return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
-static int smbus_write_byte(unsigned device, unsigned address, unsigned char val)
+
+static inline int smbus_write_byte(unsigned device, unsigned address, unsigned char val)
 {
         return do_smbus_write_byte(SMBUS_IO_BASE, device, address, val);
 }

src/southbridge/intel/esb6300/esb6300_smbus.c

@@ -8,13 +8,10 @@
 #include "esb6300.h"
 #include "esb6300_smbus.h"
 
-static int lsmbus_read_byte(struct bus *bus, device_t dev, uint8_t address)
+static int lsmbus_read_byte(device_t dev, uint8_t address)
 {
-	unsigned device;
 	struct resource *res;
-
+	res = find_resource(dev, 0x20);
-	device = dev->path.i2c.device;
-	res = find_resource(bus->dev, 0x20);
 	
 	return do_smbus_read_byte(res->base, device, address);
 }
@@ -22,10 +19,12 @@ static int lsmbus_read_byte(struct bus *bus, device_t dev, uint8_t address)
 static struct smbus_bus_operations lops_smbus_bus = {
 	.read_byte  = lsmbus_read_byte,
 };
+
 static struct pci_operations lops_pci = {
 	/* The subsystem id follows the ide controller */
 	.set_subsystem = 0,
 };
+
 static struct device_operations smbus_ops = {
 	.read_resources   = pci_dev_read_resources,
 	.set_resources    = pci_dev_set_resources,

src/southbridge/intel/esb6300/esb6300_smbus.h

@@ -14,18 +14,12 @@
 
 #define SMBUS_TIMEOUT (100*1000*10)
 
-
-static void smbus_delay(void)
-{
-	outb(0x80, 0x80);
-}
-
 static int smbus_wait_until_ready(unsigned smbus_io_base)
 {
 	unsigned loops = SMBUS_TIMEOUT;
 	unsigned char byte;
 	do {
-		smbus_delay();
+		udelay(100);
 		if (--loops == 0)
 			break;
 		byte = inb(smbus_io_base + SMBHSTSTAT);
@@ -38,7 +32,7 @@ static int smbus_wait_until_done(unsigned smbus_io_base)
 	unsigned loops = SMBUS_TIMEOUT;
 	unsigned char byte;
 	do {
-	        smbus_delay();
+	        udelay(100);
 	        if (--loops == 0)
 	               break;
 	        byte = inb(smbus_io_base + SMBHSTSTAT);
@@ -46,18 +40,20 @@ static int smbus_wait_until_done(unsigned smbus_io_base)
 	return loops?0:-1;
 }
 
+#ifdef UNUSED_CODE
 static int smbus_wait_until_blk_done(unsigned smbus_io_base)
 {
 	unsigned loops = SMBUS_TIMEOUT;
 	unsigned char byte;
 	do {
-	        smbus_delay();
+	        udelay(100);
 	        if (--loops == 0)
 	               break;
 	        byte = inb(smbus_io_base + SMBHSTSTAT);
 	} while((byte&(1<<7)) == 0);
 	return loops?0:-1;
 }
+#endif
 
 static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
 {

src/southbridge/intel/i82801cx/i82801cx.h

@@ -2,8 +2,10 @@
 #define I82801CX_H
 
 #if !defined(__PRE_RAM__)
+#include <device/device.h>
 #include "chip.h"
-extern void i82801cx_enable(device_t dev);
+void i82801cx_enable(device_t dev);
+void i82801cx_hard_reset(void);
 #endif
 
 

src/southbridge/intel/i82801cx/i82801cx_reset.c

@@ -1,4 +1,5 @@
 #include <arch/io.h>
+#include "i82801cx.h"
 
 void i82801cx_hard_reset(void)
 {

src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c

@@ -134,6 +134,9 @@ static void mcp55_early_clear_port(unsigned mcp55_num, unsigned *busn, unsigned
 
 }
 
+#include "src/pc80/udelay_io.c"
+#include "src/lib/delay.c"
+
 static void mcp55_early_pcie_setup(unsigned busnx, unsigned devnx, unsigned anactrl_io_base, unsigned pci_e_x)
 {
 	uint32_t tgio_ctrl;