sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Enable or disable the power button in Kconfig

Browse Source 
Some mainboards need to disable the power button to avoid turning off
right after being turned on, while other boards ship with a jumper over
the power button and should allow the user to configure the behavior.

This adds infrastructure in the form of four mutually exclusive options
which can be selected in a mainboard Kconfig (power button forced on/off,
and user-controllable with default on/off) and one result bool which
source code can test. (Enable the button or not.)

The options have been implemented in CS5536 code and for all mainboards
which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other
chipsets where applicable. Note that if chipset code uses the result
bool ENABLE_POWER_BUTTON, then every board using that chipset must
select one out of the four control options in order to build.

All touched boards should have unchanged behavior, except
pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the
power button can now be configured by the user.

Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed
to work as advertised on alix1c both with button enabled and disabled.

Includes additional traverse/geos changes from Nathan and
lippert/hurricane-lx changes from Jens to correctly use the new
feature on those boards.

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Aurelien Guillaume <aurelien@iwi.me>
Acked-by: Nils Jacobs <njacobs8@hetnet.nl>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Peter Stuge
2010-10-13 06:23:02 +00:00
parent f2573bd237
commit 51eafdeae6
21 changed files with 83 additions and 18 deletions
Download Patch File Download Diff File Expand all files Collapse all files

39
src/Kconfig
View File

@@ -736,4 +736,43 @@ config ID_SECTION_OFFSET
hex
default 0x10
# The four POWER_BUTTON_DEFAULT_ENABLE, POWER_BUTTON_DEFAULT_DISABLE,
# POWER_BUTTON_FORCE_ENABLE and POWER_BUTTON_FORCE_DISABLE options are
# mutually exclusive. One of these options must be selected in the
# mainboard Kconfig if the chipset supports enabling and disabling of
# the power button. Chipset code uses the ENABLE_POWER_BUTTON option set
# in mainboard/Kconfig to know if the button should be enabled or not.
config POWER_BUTTON_DEFAULT_ENABLE
def_bool n
help
Select when the board has a power button which can optionally be
disabled by the user.
config POWER_BUTTON_DEFAULT_DISABLE
def_bool n
help
Select when the board has a power button which can optionally be
enabled by the user, e.g. when the board ships with a jumper over
the power switch contacts.
config POWER_BUTTON_FORCE_ENABLE
def_bool n
help
Select when the board requires that the power button is always
enabled.
config POWER_BUTTON_FORCE_DISABLE
def_bool n
help
Select when the board requires that the power button is always
disabled, e.g. when it has been hardwired to ground.
config POWER_BUTTON_IS_OPTIONAL
bool
default y if POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE
default n if !(POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE)
help
Internal option that controls ENABLE_POWER_BUTTON visibility.
source src/Kconfig.deprecated_options