Remove some white space and comment differences from devicetree.cb and Config.lb
files. These boards have non-trivial differences: gigabyte/m57sli kontron/986lcd-m dell/s1850 via/epia-m700 Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4924 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Myles Watson
@@ -136,7 +136,7 @@ config chip.h
|
|||||||
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
|
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
|
||||||
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
|
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
|
||||||
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
|
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
|
||||||
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
|
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
|
||||||
#Define gfx_dual_slot, 0: single slot, 1: dual slot
|
#Define gfx_dual_slot, 0: single slot, 1: dual slot
|
||||||
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
|
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
|
||||||
#Define gfx_tmds, 0: didn't support TMDS, 1: support
|
#Define gfx_tmds, 0: didn't support TMDS, 1: support
|
||||||
|
|||||||
@@ -136,7 +136,7 @@ config chip.h
|
|||||||
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
|
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
|
||||||
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
|
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
|
||||||
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
|
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
|
||||||
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
|
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
|
||||||
#Define gfx_dual_slot, 0: single slot, 1: dual slot
|
#Define gfx_dual_slot, 0: single slot, 1: dual slot
|
||||||
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
|
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
|
||||||
#Define gfx_tmds, 0: didn't support TMDS, 1: support
|
#Define gfx_tmds, 0: didn't support TMDS, 1: support
|
||||||
|
|||||||
@@ -1,29 +1,29 @@
|
|||||||
##
|
##
|
||||||
## This file is part of the coreboot project.
|
## This file is part of the coreboot project.
|
||||||
##
|
##
|
||||||
## Copyright (C) 2007 AMD
|
## Copyright (C) 2007 AMD
|
||||||
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||||
##
|
##
|
||||||
## This program is free software; you can redistribute it and/or modify
|
## This program is free software; you can redistribute it and/or modify
|
||||||
## it under the terms of the GNU General Public License as published by
|
## it under the terms of the GNU General Public License as published by
|
||||||
## the Free Software Foundation; either version 2 of the License, or
|
## the Free Software Foundation; either version 2 of the License, or
|
||||||
## (at your option) any later version.
|
## (at your option) any later version.
|
||||||
##
|
##
|
||||||
## This program is distributed in the hope that it will be useful,
|
## This program is distributed in the hope that it will be useful,
|
||||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
## GNU General Public License for more details.
|
## GNU General Public License for more details.
|
||||||
##
|
##
|
||||||
## You should have received a copy of the GNU General Public License
|
## You should have received a copy of the GNU General Public License
|
||||||
## along with this program; if not, write to the Free Software
|
## along with this program; if not, write to the Free Software
|
||||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
##
|
##
|
||||||
|
|
||||||
## CONFIG_XIP_ROM_SIZE must be a power of 2.
|
## CONFIG_XIP_ROM_SIZE must be a power of 2.
|
||||||
default CONFIG_XIP_ROM_SIZE = 64 * 1024
|
default CONFIG_XIP_ROM_SIZE = 64 * 1024
|
||||||
include /config/failovercalculation.lb
|
include /config/failovercalculation.lb
|
||||||
|
|
||||||
arch i386 end
|
arch i386 end
|
||||||
|
|
||||||
##
|
##
|
||||||
## Build the objects we have code for in this directory.
|
## Build the objects we have code for in this directory.
|
||||||
@@ -36,28 +36,28 @@ object get_bus_conf.o
|
|||||||
if CONFIG_GENERATE_MP_TABLE object mptable.o end
|
if CONFIG_GENERATE_MP_TABLE object mptable.o end
|
||||||
if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
|
if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
|
||||||
|
|
||||||
if CONFIG_USE_INIT
|
if CONFIG_USE_INIT
|
||||||
makerule ./cache_as_ram_auto.o
|
makerule ./cache_as_ram_auto.o
|
||||||
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
|
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
|
||||||
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
|
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
|
||||||
end
|
end
|
||||||
else
|
else
|
||||||
makerule ./cache_as_ram_auto.inc
|
makerule ./cache_as_ram_auto.inc
|
||||||
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
|
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
|
||||||
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
|
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
|
||||||
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
|
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
|
||||||
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
|
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
|
|
||||||
if CONFIG_USE_FAILOVER_IMAGE
|
if CONFIG_USE_FAILOVER_IMAGE
|
||||||
else
|
else
|
||||||
if CONFIG_AP_CODE_IN_CAR
|
if CONFIG_AP_CODE_IN_CAR
|
||||||
makerule ./apc_auto.o
|
makerule ./apc_auto.o
|
||||||
depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
|
depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
|
||||||
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
|
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
|
||||||
end
|
end
|
||||||
ldscript /arch/i386/init/ldscript_apc.lb
|
ldscript /arch/i386/init/ldscript_apc.lb
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
|
|
||||||
@@ -79,32 +79,32 @@ end
|
|||||||
|
|
||||||
mainboardinit cpu/x86/32bit/entry32.inc
|
mainboardinit cpu/x86/32bit/entry32.inc
|
||||||
|
|
||||||
if CONFIG_USE_INIT
|
if CONFIG_USE_INIT
|
||||||
ldscript /cpu/x86/32bit/entry32.lds
|
ldscript /cpu/x86/32bit/entry32.lds
|
||||||
end
|
end
|
||||||
|
|
||||||
if CONFIG_USE_INIT
|
if CONFIG_USE_INIT
|
||||||
ldscript /cpu/amd/car/cache_as_ram.lds
|
ldscript /cpu/amd/car/cache_as_ram.lds
|
||||||
end
|
end
|
||||||
|
|
||||||
##
|
##
|
||||||
## Build our reset vector (This is where coreboot is entered)
|
## Build our reset vector (This is where coreboot is entered)
|
||||||
##
|
##
|
||||||
if CONFIG_HAVE_FAILOVER_BOOT
|
if CONFIG_HAVE_FAILOVER_BOOT
|
||||||
if CONFIG_USE_FAILOVER_IMAGE
|
if CONFIG_USE_FAILOVER_IMAGE
|
||||||
mainboardinit cpu/x86/16bit/reset16.inc
|
mainboardinit cpu/x86/16bit/reset16.inc
|
||||||
ldscript /cpu/x86/16bit/reset16.lds
|
ldscript /cpu/x86/16bit/reset16.lds
|
||||||
else
|
else
|
||||||
mainboardinit cpu/x86/32bit/reset32.inc
|
mainboardinit cpu/x86/32bit/reset32.inc
|
||||||
ldscript /cpu/x86/32bit/reset32.lds
|
ldscript /cpu/x86/32bit/reset32.lds
|
||||||
end
|
end
|
||||||
else
|
else
|
||||||
if CONFIG_USE_FALLBACK_IMAGE
|
if CONFIG_USE_FALLBACK_IMAGE
|
||||||
mainboardinit cpu/x86/16bit/reset16.inc
|
mainboardinit cpu/x86/16bit/reset16.inc
|
||||||
ldscript /cpu/x86/16bit/reset16.lds
|
ldscript /cpu/x86/16bit/reset16.lds
|
||||||
else
|
else
|
||||||
mainboardinit cpu/x86/32bit/reset32.inc
|
mainboardinit cpu/x86/32bit/reset32.inc
|
||||||
ldscript /cpu/x86/32bit/reset32.lds
|
ldscript /cpu/x86/32bit/reset32.lds
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
|
|
||||||
@@ -118,12 +118,12 @@ ldscript /southbridge/nvidia/mcp55/id.lds
|
|||||||
## ROMSTRAP table for MCP55
|
## ROMSTRAP table for MCP55
|
||||||
##
|
##
|
||||||
if CONFIG_HAVE_FAILOVER_BOOT
|
if CONFIG_HAVE_FAILOVER_BOOT
|
||||||
if CONFIG_USE_FAILOVER_IMAGE
|
if CONFIG_USE_FAILOVER_IMAGE
|
||||||
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
|
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
|
||||||
ldscript /southbridge/nvidia/mcp55/romstrap.lds
|
ldscript /southbridge/nvidia/mcp55/romstrap.lds
|
||||||
end
|
end
|
||||||
else
|
else
|
||||||
if CONFIG_USE_FALLBACK_IMAGE
|
if CONFIG_USE_FALLBACK_IMAGE
|
||||||
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
|
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
|
||||||
ldscript /southbridge/nvidia/mcp55/romstrap.lds
|
ldscript /southbridge/nvidia/mcp55/romstrap.lds
|
||||||
end
|
end
|
||||||
@@ -135,7 +135,7 @@ end
|
|||||||
mainboardinit cpu/amd/car/cache_as_ram.inc
|
mainboardinit cpu/amd/car/cache_as_ram.inc
|
||||||
|
|
||||||
###
|
###
|
||||||
### This is the early phase of coreboot startup
|
### This is the early phase of coreboot startup
|
||||||
### Things are delicate and we test to see if we should
|
### Things are delicate and we test to see if we should
|
||||||
### failover to another image.
|
### failover to another image.
|
||||||
###
|
###
|
||||||
@@ -176,209 +176,187 @@ if CONFIG_GENERATE_ACPI_TABLES
|
|||||||
end
|
end
|
||||||
|
|
||||||
##
|
##
|
||||||
## Include the secondary Configuration files
|
## Include the secondary Configuration files
|
||||||
##
|
##
|
||||||
config chip.h
|
config chip.h
|
||||||
|
|
||||||
chip northbridge/amd/amdk8/root_complex
|
chip northbridge/amd/amdk8/root_complex
|
||||||
device apic_cluster 0 on
|
device apic_cluster 0 on
|
||||||
chip cpu/amd/socket_AM2
|
chip cpu/amd/socket_AM2
|
||||||
device apic 0 on end
|
device apic 0 on end
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
device pci_domain 0 on
|
device pci_domain 0 on
|
||||||
chip northbridge/amd/amdk8 #mc0
|
chip northbridge/amd/amdk8 #mc0
|
||||||
device pci 18.0 on
|
device pci 18.0 on # devices on link 0, link 0 == LDT 0
|
||||||
# devices on link 0, link 0 == LDT 0
|
chip southbridge/nvidia/mcp55
|
||||||
chip southbridge/nvidia/mcp55
|
device pci 0.0 on end # HT
|
||||||
device pci 0.0 on end # HT
|
device pci 1.0 on # LPC
|
||||||
device pci 1.0 on # LPC
|
chip superio/ite/it8716f
|
||||||
chip superio/ite/it8716f
|
# Floppy and any LDN
|
||||||
# Floppy and any LDN
|
device pnp 2e.0 on
|
||||||
device pnp 2e.0 on
|
# Watchdog from CLKIN, CLKIN = 24 MHz
|
||||||
# Watchdog from CLKIN, CLKIN = 24 MHz
|
irq 0x23 = 0x11
|
||||||
irq 0x23 = 0x11
|
|
||||||
# Serial Flash (SPI only)
|
# Serial Flash (SPI only)
|
||||||
#0x24 = 0x1a
|
#0x24 = 0x1a
|
||||||
io 0x60 = 0x3f0
|
io 0x60 = 0x3f0
|
||||||
irq 0x70 = 6
|
irq 0x70 = 6
|
||||||
drq 0x74 = 2
|
drq 0x74 = 2
|
||||||
end
|
|
||||||
device pnp 2e.1 on # Com1
|
|
||||||
io 0x60 = 0x3f8
|
|
||||||
irq 0x70 = 4
|
|
||||||
end
|
|
||||||
device pnp 2e.2 off # Com2
|
|
||||||
io 0x60 = 0x2f8
|
|
||||||
irq 0x70 = 3
|
|
||||||
end
|
|
||||||
device pnp 2e.3 on # Parallel Port
|
|
||||||
io 0x60 = 0x378
|
|
||||||
irq 0x70 = 7
|
|
||||||
end
|
|
||||||
device pnp 2e.4 on # EC
|
|
||||||
io 0x60 = 0x290
|
|
||||||
io 0x62 = 0x230
|
|
||||||
irq 0x70 = 9
|
|
||||||
end
|
|
||||||
device pnp 2e.5 on # Keyboard
|
|
||||||
io 0x60 = 0x60
|
|
||||||
io 0x62 = 0x64
|
|
||||||
irq 0x70 = 1
|
|
||||||
end
|
|
||||||
device pnp 2e.6 on # Mouse
|
|
||||||
irq 0x70 = 12
|
|
||||||
end
|
|
||||||
device pnp 2e.7 on # GPIO, SPI flash
|
|
||||||
# pin 84 is not GP10
|
|
||||||
irq 0x25 = 0x0
|
|
||||||
# pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
|
|
||||||
irq 0x26 = 0x43
|
|
||||||
# pin 13 is GP35
|
|
||||||
irq 0x27 = 0x20
|
|
||||||
# pin 70 is not GP46
|
|
||||||
#irq 0x28 = 0x0
|
|
||||||
# pin 6,3,128,127,126 is GP63,64,65,66,67
|
|
||||||
irq 0x29 = 0x81
|
|
||||||
# Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V
|
|
||||||
#irq 0x2c = 0x1f
|
|
||||||
# Simple I/O base
|
|
||||||
io 0x62 = 0x800
|
|
||||||
# Serial Flash I/O (SPI only)
|
|
||||||
io 0x64 = 0x820
|
|
||||||
# watch dog force timeout (parallel flash only)
|
|
||||||
#irq 0x71 = 0x1
|
|
||||||
# No WDT interrupt
|
|
||||||
irq 0x72 = 0x0
|
|
||||||
# GPIO pin set 1 disable internal pullup
|
|
||||||
irq 0xb8 = 0x0
|
|
||||||
# GPIO pin set 5 enable internal pullup
|
|
||||||
irq 0xbc = 0x01
|
|
||||||
# SIO pin set 1 alternate function
|
|
||||||
#irq 0xc0 = 0x0
|
|
||||||
# SIO pin set 2 mixed function
|
|
||||||
irq 0xc1 = 0x43
|
|
||||||
# SIO pin set 3 mixed function
|
|
||||||
irq 0xc2 = 0x20
|
|
||||||
# SIO pin set 4 alternate function
|
|
||||||
#irq 0xc3 = 0x0
|
|
||||||
# SIO pin set 1 input mode
|
|
||||||
#irq 0xc8 = 0x0
|
|
||||||
# SIO pin set 2 input mode
|
|
||||||
irq 0xc9 = 0x0
|
|
||||||
# SIO pin set 4 input mode
|
|
||||||
#irq 0xcb = 0x0
|
|
||||||
# Generate SMI# on EC IRQ
|
|
||||||
#irq 0xf0 = 0x10
|
|
||||||
# SMI# level trigger
|
|
||||||
#irq 0xf1 = 0x40
|
|
||||||
# HWMON alert beep pin location
|
|
||||||
irq 0xf6 = 0x28
|
|
||||||
end
|
|
||||||
device pnp 2e.8 off # MIDI
|
|
||||||
io 0x60 = 0x300
|
|
||||||
irq 0x70 = 10
|
|
||||||
end
|
|
||||||
device pnp 2e.9 off # GAME
|
|
||||||
io 0x60 = 0x220
|
|
||||||
end
|
|
||||||
device pnp 2e.a off end # CIR
|
|
||||||
end
|
end
|
||||||
|
device pnp 2e.1 on # Com1
|
||||||
|
io 0x60 = 0x3f8
|
||||||
|
irq 0x70 = 4
|
||||||
|
end
|
||||||
|
device pnp 2e.2 off # Com2
|
||||||
|
io 0x60 = 0x2f8
|
||||||
|
irq 0x70 = 3
|
||||||
|
end
|
||||||
|
device pnp 2e.3 on # Parallel Port
|
||||||
|
io 0x60 = 0x378
|
||||||
|
irq 0x70 = 7
|
||||||
|
end
|
||||||
|
device pnp 2e.4 on # EC
|
||||||
|
io 0x60 = 0x290
|
||||||
|
io 0x62 = 0x230
|
||||||
|
irq 0x70 = 9
|
||||||
|
end
|
||||||
|
device pnp 2e.5 on # Keyboard
|
||||||
|
io 0x60 = 0x60
|
||||||
|
io 0x62 = 0x64
|
||||||
|
irq 0x70 = 1
|
||||||
|
end
|
||||||
|
device pnp 2e.6 on # Mouse
|
||||||
|
irq 0x70 = 12
|
||||||
|
end
|
||||||
|
device pnp 2e.7 on # GPIO, SPI flash
|
||||||
|
# pin 84 is not GP10
|
||||||
|
irq 0x25 = 0x0
|
||||||
|
# pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
|
||||||
|
irq 0x26 = 0x43
|
||||||
|
# pin 13 is GP35
|
||||||
|
irq 0x27 = 0x20
|
||||||
|
# pin 70 is not GP46
|
||||||
|
#irq 0x28 = 0x0
|
||||||
|
# pin 6,3,128,127,126 is GP63,64,65,66,67
|
||||||
|
irq 0x29 = 0x81
|
||||||
|
# Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG, VIN3 is internal voltage divider for VCC5V
|
||||||
|
#irq 0x2c = 0x1f
|
||||||
|
# Simple I/O base
|
||||||
|
io 0x62 = 0x800
|
||||||
|
# Serial Flash I/O (SPI only)
|
||||||
|
io 0x64 = 0x820
|
||||||
|
# watch dog force timeout (parallel flash only)
|
||||||
|
#irq 0x71 = 0x1
|
||||||
|
# No WDT interrupt
|
||||||
|
irq 0x72 = 0x0
|
||||||
|
# GPIO pin set 1 disable internal pullup
|
||||||
|
irq 0xb8 = 0x0
|
||||||
|
# GPIO pin set 5 enable internal pullup
|
||||||
|
irq 0xbc = 0x01
|
||||||
|
# SIO pin set 1 alternate function
|
||||||
|
#irq 0xc0 = 0x0
|
||||||
|
# SIO pin set 2 mixed function
|
||||||
|
irq 0xc1 = 0x43
|
||||||
|
# SIO pin set 3 mixed function
|
||||||
|
irq 0xc2 = 0x20
|
||||||
|
# SIO pin set 4 alternate function
|
||||||
|
#irq 0xc3 = 0x0
|
||||||
|
# SIO pin set 1 input mode
|
||||||
|
#irq 0xc8 = 0x0
|
||||||
|
# SIO pin set 2 input mode
|
||||||
|
irq 0xc9 = 0x0
|
||||||
|
# SIO pin set 4 input mode
|
||||||
|
#irq 0xcb = 0x0
|
||||||
|
# Generate SMI# on EC IRQ
|
||||||
|
#irq 0xf0 = 0x10
|
||||||
|
# SMI# level trigger
|
||||||
|
#irq 0xf1 = 0x40
|
||||||
|
# HWMON alert beep pin location
|
||||||
|
irq 0xf6 = 0x28
|
||||||
|
end
|
||||||
|
device pnp 2e.8 off # MIDI
|
||||||
|
io 0x60 = 0x300
|
||||||
|
irq 0x70 = 10
|
||||||
|
end
|
||||||
|
device pnp 2e.9 off # GAME
|
||||||
|
io 0x60 = 0x220
|
||||||
|
end
|
||||||
|
device pnp 2e.a off end # CIR
|
||||||
end
|
end
|
||||||
device pci 1.1 on # SM 0
|
end
|
||||||
chip drivers/generic/generic #dimm 0-0-0
|
device pci 1.1 on # SM 0
|
||||||
device i2c 50 on end
|
chip drivers/generic/generic #dimm 0-0-0
|
||||||
end
|
device i2c 50 on end
|
||||||
chip drivers/generic/generic #dimm 0-0-1
|
end
|
||||||
device i2c 51 on end
|
chip drivers/generic/generic #dimm 0-0-1
|
||||||
end
|
device i2c 51 on end
|
||||||
chip drivers/generic/generic #dimm 0-1-0
|
end
|
||||||
device i2c 52 on end
|
chip drivers/generic/generic #dimm 0-1-0
|
||||||
end
|
device i2c 52 on end
|
||||||
chip drivers/generic/generic #dimm 0-1-1
|
end
|
||||||
device i2c 53 on end
|
chip drivers/generic/generic #dimm 0-1-1
|
||||||
end
|
device i2c 53 on end
|
||||||
chip drivers/generic/generic #dimm 1-0-0
|
end
|
||||||
device i2c 54 on end
|
chip drivers/generic/generic #dimm 1-0-0
|
||||||
end
|
device i2c 54 on end
|
||||||
chip drivers/generic/generic #dimm 1-0-1
|
end
|
||||||
device i2c 55 on end
|
chip drivers/generic/generic #dimm 1-0-1
|
||||||
end
|
device i2c 55 on end
|
||||||
chip drivers/generic/generic #dimm 1-1-0
|
end
|
||||||
device i2c 56 on end
|
chip drivers/generic/generic #dimm 1-1-0
|
||||||
end
|
device i2c 56 on end
|
||||||
chip drivers/generic/generic #dimm 1-1-1
|
end
|
||||||
device i2c 57 on end
|
chip drivers/generic/generic #dimm 1-1-1
|
||||||
end
|
device i2c 57 on end
|
||||||
end # SM
|
end
|
||||||
|
end # SM
|
||||||
#WTF?!? We already have device pci 1.1 in the section above
|
#WTF?!? We already have device pci 1.1 in the section above
|
||||||
device pci 1.1 on # SM 1
|
device pci 1.1 on # SM 1
|
||||||
#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
|
chip drivers/generic/generic #MAC EEPROM
|
||||||
# chip drivers/generic/generic #PCIXA Slot1
|
device i2c 51 on end
|
||||||
# device i2c 50 on end
|
end
|
||||||
# end
|
end # SM
|
||||||
# chip drivers/generic/generic #PCIXB Slot1
|
device pci 2.0 on end # USB 1.1
|
||||||
# device i2c 51 on end
|
device pci 2.1 on end # USB 2
|
||||||
# end
|
device pci 4.0 on end # IDE
|
||||||
# chip drivers/generic/generic #PCIXB Slot2
|
device pci 5.0 on end # SATA 0
|
||||||
# device i2c 52 on end
|
device pci 5.1 on end # SATA 1
|
||||||
# end
|
device pci 5.2 on end # SATA 2
|
||||||
# chip drivers/generic/generic #PCI Slot1
|
device pci 6.0 on end # PCI
|
||||||
# device i2c 53 on end
|
device pci 6.1 on end # AZA
|
||||||
# end
|
device pci 8.0 on end # NIC
|
||||||
# chip drivers/generic/generic #Master MCP55 PCI-E
|
device pci 9.0 off end # NIC
|
||||||
# device i2c 54 on end
|
device pci a.0 on end # PCI E 5
|
||||||
# end
|
device pci b.0 on end # PCI E 4
|
||||||
# chip drivers/generic/generic #Slave MCP55 PCI-E
|
device pci c.0 on end # PCI E 3
|
||||||
# device i2c 55 on end
|
device pci d.0 on end # PCI E 2
|
||||||
# end
|
device pci e.0 on end # PCI E 1
|
||||||
chip drivers/generic/generic #MAC EEPROM
|
device pci f.0 on end # PCI E 0
|
||||||
device i2c 51 on end
|
register "ide0_enable" = "1"
|
||||||
end
|
register "sata0_enable" = "1"
|
||||||
|
register "sata1_enable" = "1"
|
||||||
end # SM
|
|
||||||
device pci 2.0 on end # USB 1.1
|
|
||||||
device pci 2.1 on end # USB 2
|
|
||||||
device pci 4.0 on end # IDE
|
|
||||||
device pci 5.0 on end # SATA 0
|
|
||||||
device pci 5.1 on end # SATA 1
|
|
||||||
device pci 5.2 on end # SATA 2
|
|
||||||
device pci 6.0 on end # PCI
|
|
||||||
device pci 6.1 on end # AZA
|
|
||||||
device pci 8.0 on end # NIC
|
|
||||||
device pci 9.0 off end # NIC
|
|
||||||
device pci a.0 on end # PCI E 5
|
|
||||||
device pci b.0 on end # PCI E 4
|
|
||||||
device pci c.0 on end # PCI E 3
|
|
||||||
device pci d.0 on end # PCI E 2
|
|
||||||
device pci e.0 on end # PCI E 1
|
|
||||||
device pci f.0 on end # PCI E 0
|
|
||||||
register "ide0_enable" = "1"
|
|
||||||
register "sata0_enable" = "1"
|
|
||||||
register "sata1_enable" = "1"
|
|
||||||
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
|
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
|
||||||
register "mac_eeprom_addr" = "0x51"
|
register "mac_eeprom_addr" = "0x51"
|
||||||
end
|
end
|
||||||
end # device pci 18.0
|
end #device pci 18.0
|
||||||
device pci 18.0 on end # Link 1
|
device pci 18.0 on end # Link 1
|
||||||
device pci 18.0 on end
|
device pci 18.0 on end
|
||||||
device pci 18.1 on end
|
device pci 18.1 on end
|
||||||
device pci 18.2 on end
|
device pci 18.2 on end
|
||||||
device pci 18.3 on end
|
device pci 18.3 on end
|
||||||
end # mc0
|
end # mc0
|
||||||
|
|
||||||
end # PCI domain
|
end # PCI domain
|
||||||
|
|
||||||
# chip drivers/generic/debug
|
# chip drivers/generic/debug
|
||||||
# device pnp 0.0 off end # chip name
|
# device pnp 0.0 off end # chip name
|
||||||
# device pnp 0.1 on end # pci_regs_all
|
# device pnp 0.1 on end # pci_regs_all
|
||||||
# device pnp 0.2 on end # mem
|
# device pnp 0.2 on end # mem
|
||||||
# device pnp 0.3 off end # cpuid
|
# device pnp 0.3 off end # cpuid
|
||||||
# device pnp 0.4 on end # smbus_regs_all
|
# device pnp 0.4 on end # smbus_regs_all
|
||||||
# device pnp 0.5 off end # dual core msr
|
# device pnp 0.5 off end # dual core msr
|
||||||
# device pnp 0.6 off end # cache size
|
# device pnp 0.6 off end # cache size
|
||||||
# device pnp 0.7 off end # tsc
|
# device pnp 0.7 off end # tsc
|
||||||
# device pnp 0.8 off end # io
|
# device pnp 0.8 off end # io
|
||||||
# device pnp 0.9 off end # io
|
# device pnp 0.9 off end # io
|
||||||
# end
|
# end
|
||||||
end #root_complex
|
end #root_complex
|
||||||
|
|||||||
@@ -5,11 +5,11 @@ chip northbridge/amd/amdk8/root_complex
|
|||||||
end
|
end
|
||||||
end
|
end
|
||||||
device pci_domain 0 on
|
device pci_domain 0 on
|
||||||
chip northbridge/amd/amdk8
|
chip northbridge/amd/amdk8 #mc0
|
||||||
device pci 18.0 on
|
device pci 18.0 on # devices on link 0, link 0 == LDT 0
|
||||||
chip southbridge/nvidia/mcp55
|
chip southbridge/nvidia/mcp55
|
||||||
device pci 0.0 on end
|
device pci 0.0 on end # HT
|
||||||
device pci 1.0 on
|
device pci 1.0 on # LPC
|
||||||
chip superio/ite/it8716f
|
chip superio/ite/it8716f
|
||||||
# Floppy and any LDN
|
# Floppy and any LDN
|
||||||
device pnp 2e.0 on
|
device pnp 2e.0 on
|
||||||
@@ -52,7 +52,7 @@ device pci_domain 0 on
|
|||||||
# pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
|
# pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
|
||||||
irq 0x26 = 0x43
|
irq 0x26 = 0x43
|
||||||
# pin 13 is GP35
|
# pin 13 is GP35
|
||||||
irq 0x27 = 0x20
|
irq 0x27 = 0x20
|
||||||
# pin 70 is not GP46
|
# pin 70 is not GP46
|
||||||
#irq 0x28 = 0x0
|
#irq 0x28 = 0x0
|
||||||
# pin 6,3,128,127,126 is GP63,64,65,66,67
|
# pin 6,3,128,127,126 is GP63,64,65,66,67
|
||||||
@@ -66,7 +66,7 @@ device pci_domain 0 on
|
|||||||
# watch dog force timeout (parallel flash only)
|
# watch dog force timeout (parallel flash only)
|
||||||
#irq 0x71 = 0x1
|
#irq 0x71 = 0x1
|
||||||
# No WDT interrupt
|
# No WDT interrupt
|
||||||
irq 0x72 = 0x0
|
irq 0x72 = 0x0
|
||||||
# GPIO pin set 1 disable internal pullup
|
# GPIO pin set 1 disable internal pullup
|
||||||
irq 0xb8 = 0x0
|
irq 0xb8 = 0x0
|
||||||
# GPIO pin set 5 enable internal pullup
|
# GPIO pin set 5 enable internal pullup
|
||||||
@@ -99,11 +99,10 @@ device pci_domain 0 on
|
|||||||
device pnp 2e.9 off # GAME
|
device pnp 2e.9 off # GAME
|
||||||
io 0x60 = 0x220
|
io 0x60 = 0x220
|
||||||
end
|
end
|
||||||
device pnp 2e.a off # CIR
|
device pnp 2e.a off end # CIR
|
||||||
end
|
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
device pci 1.1 on
|
device pci 1.1 on # SM 0
|
||||||
chip drivers/generic/generic #dimm 0-0-0
|
chip drivers/generic/generic #dimm 0-0-0
|
||||||
device i2c 50 on end
|
device i2c 50 on end
|
||||||
end
|
end
|
||||||
@@ -129,22 +128,22 @@ device pci_domain 0 on
|
|||||||
device i2c 57 on end
|
device i2c 57 on end
|
||||||
end
|
end
|
||||||
end # SM
|
end # SM
|
||||||
device pci 2.0 on end # USB 1.1
|
device pci 2.0 on end # USB 1.1
|
||||||
device pci 2.1 on end # USB 2
|
device pci 2.1 on end # USB 2
|
||||||
device pci 4.0 on end # IDE
|
device pci 4.0 on end # IDE
|
||||||
device pci 5.0 on end # SATA 0
|
device pci 5.0 on end # SATA 0
|
||||||
device pci 5.1 on end # SATA 1
|
device pci 5.1 on end # SATA 1
|
||||||
device pci 5.2 on end # SATA 2
|
device pci 5.2 on end # SATA 2
|
||||||
device pci 6.0 on end # PCI
|
device pci 6.0 on end # PCI
|
||||||
device pci 6.1 on end # AUDIO
|
device pci 6.1 on end # AUDIO
|
||||||
device pci 8.0 on end # NIC
|
device pci 8.0 on end # NIC
|
||||||
device pci 9.0 off end # N/A
|
device pci 9.0 off end # N/A
|
||||||
device pci a.0 on end # PCI E 5
|
device pci a.0 on end # PCI E 5
|
||||||
device pci b.0 on end # PCI E 4
|
device pci b.0 on end # PCI E 4
|
||||||
device pci c.0 on end # PCI E 3
|
device pci c.0 on end # PCI E 3
|
||||||
device pci d.0 on end # PCI E 2
|
device pci d.0 on end # PCI E 2
|
||||||
device pci e.0 on end # PCI E 1
|
device pci e.0 on end # PCI E 1
|
||||||
device pci f.0 on end # PCI E 0
|
device pci f.0 on end # PCI E 0
|
||||||
register "ide0_enable" = "1"
|
register "ide0_enable" = "1"
|
||||||
register "sata0_enable" = "1"
|
register "sata0_enable" = "1"
|
||||||
register "sata1_enable" = "1"
|
register "sata1_enable" = "1"
|
||||||
@@ -153,13 +152,14 @@ device pci_domain 0 on
|
|||||||
end
|
end
|
||||||
end #device pci 18.0
|
end #device pci 18.0
|
||||||
device pci 18.0 on end # Link 1
|
device pci 18.0 on end # Link 1
|
||||||
|
device pci 18.0 on end
|
||||||
device pci 18.1 on end
|
device pci 18.1 on end
|
||||||
device pci 18.2 on end
|
device pci 18.2 on end
|
||||||
device pci 18.3 on end
|
device pci 18.3 on end
|
||||||
end # mc0
|
end # mc0
|
||||||
end # PCI domain
|
end # PCI domain
|
||||||
|
|
||||||
# chip drivers/generic/debug
|
# chip drivers/generic/debug
|
||||||
# device pnp 0.0 off end # chip name
|
# device pnp 0.0 off end # chip name
|
||||||
# device pnp 0.1 on end # pci_regs_all
|
# device pnp 0.1 on end # pci_regs_all
|
||||||
# device pnp 0.2 on end # mem
|
# device pnp 0.2 on end # mem
|
||||||
@@ -170,6 +170,5 @@ device pci_domain 0 on
|
|||||||
# device pnp 0.7 off end # tsc
|
# device pnp 0.7 off end # tsc
|
||||||
# device pnp 0.8 off end # io
|
# device pnp 0.8 off end # io
|
||||||
# device pnp 0.9 off end # io
|
# device pnp 0.9 off end # io
|
||||||
# end
|
# end
|
||||||
|
|
||||||
end #root_complex
|
end #root_complex
|
||||||
|
|||||||
@@ -136,7 +136,7 @@ config chip.h
|
|||||||
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
|
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
|
||||||
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
|
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
|
||||||
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
|
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
|
||||||
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
|
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
|
||||||
#Define gfx_dual_slot, 0: single slot, 1: dual slot
|
#Define gfx_dual_slot, 0: single slot, 1: dual slot
|
||||||
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
|
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
|
||||||
#Define gfx_tmds, 0: didn't support TMDS, 1: support
|
#Define gfx_tmds, 0: didn't support TMDS, 1: support
|
||||||
|
|||||||
Reference in New Issue
Block a user