Remove:

- CONFIG_CBFS
- anything that's conditional on CONFIG_CBFS == 0
- files that were only included for CONFIG_CBFS == 0
In particular:
- elfboot
- stream boot code
- mini-filo and filesystems (depends on stream boot code)

After this commit, there is no way to build an image that is not using
CBFS anymore.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/Kconfig

@@ -36,10 +36,6 @@ source src/southbridge/Kconfig
 source src/superio/Kconfig
 source src/cpu/Kconfig
 
-config CBFS
-	bool
-	default y
-
 config PCI_BUS_SEGN_BITS
 	int
 	default 0

src/arch/i386/Config.lb

@@ -1,45 +1,29 @@
-uses CONFIG_CBFS
 uses CONFIG_SMP
 uses CONFIG_PRECOMPRESSED_PAYLOAD
 uses CONFIG_USE_INIT
 uses CONFIG_HAVE_FAILOVER_BOOT
 uses CONFIG_USE_FAILOVER_IMAGE
 uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_CBFS
 
 init init/crt0.S.lb
 
-if CONFIG_CBFS
+if CONFIG_USE_FAILOVER_IMAGE
-	if CONFIG_USE_FAILOVER_IMAGE
+else
-	else
+	initobject /src/lib/cbfs.o
-		initobject /src/lib/cbfs.o
+	initobject /src/lib/lzma.o
-		initobject /src/lib/lzma.o
-	end
 end
 
 if CONFIG_HAVE_FAILOVER_BOOT
 	if CONFIG_USE_FAILOVER_IMAGE
 		ldscript init/ldscript_failover.lb
 	else
-		if CONFIG_CBFS
 			ldscript init/ldscript_cbfs.lb
-		else
-			ldscript init/ldscript.lb
-		end
 	end
 else
-	if CONFIG_CBFS
+	if CONFIG_USE_FALLBACK_IMAGE
-		if CONFIG_USE_FALLBACK_IMAGE
+		ldscript init/ldscript_fallback_cbfs.lb
-			ldscript init/ldscript_fallback_cbfs.lb
-		else
-			ldscript init/ldscript_cbfs.lb
-		end
 	else
-		if CONFIG_USE_FALLBACK_IMAGE
+		ldscript init/ldscript_cbfs.lb
-			ldscript init/ldscript_fallback.lb
-		else
-			ldscript init/ldscript.lb
-		end
 	end
 end
 
@@ -82,13 +66,6 @@ end
 # catch the case where there is no compression
 makedefine PAYLOAD-1:=payload
 
-if CONFIG_CBFS
-else
-# match the case where a compression type is specified.
-makedefine PAYLOAD-$(CONFIG_COMPRESSED_PAYLOAD_NRV2B):=payload.nrv2b
-makedefine PAYLOAD-$(CONFIG_COMPRESSED_PAYLOAD_LZMA):=payload.lzma
-end
-
 # catch the case where there is precompression. Yes, this bites. 
 if CONFIG_PRECOMPRESSED_PAYLOAD 
 	makedefine PAYLOAD-1:=payload
@@ -105,8 +82,8 @@ if CONFIG_USE_FAILOVER_IMAGE
 else
 	makerule coreboot.rom 
 		depends	"coreboot.strip buildrom $(PAYLOAD-1)"
-		action "PAYLOAD=$(PAYLOAD-1); if [ $(CONFIG_CBFS) -eq 1 ]; then PAYLOAD=/dev/null; touch cbfs-support; fi; ./buildrom $< $@ $$PAYLOAD $(CONFIG_ROM_IMAGE_SIZE) $(CONFIG_ROM_SECTION_SIZE)"
+		action "touch cbfs-support; ./buildrom $< $@ /dev/null $(CONFIG_ROM_IMAGE_SIZE) $(CONFIG_ROM_SECTION_SIZE)"
-		action "if [ $(CONFIG_COMPRESSED_PAYLOAD_LZMA) -eq 1 -a $(CONFIG_CBFS) -eq 1 ]; then echo l > cbfs-support; fi"
+		action "if [ $(CONFIG_COMPRESSED_PAYLOAD_LZMA) -eq 1 ]; then echo l > cbfs-support; fi"
 	end
 end
 

src/arch/i386/init/crt0.S.lb

@@ -74,19 +74,8 @@ __main:
 	movl	$0x4000000, %esp
 	movl	%esp, %ebp
 	pushl %esi
-#if CONFIG_CBFS == 1
 	pushl $str_coreboot_ram_name
 	call cbfs_and_run_core
-#else
-	movl	$_liseg, %esi
-	movl	$_iseg,  %edi
-	movl	$_eiseg, %ecx
-	subl	%edi, %ecx
-	pushl %ecx
-	pushl %edi
-	pushl %esi
-	call copy_and_run_core
-#endif
 
 .Lhlt:	
 	intel_chip_post_macro(0xee)	/* post fe */
@@ -148,12 +137,10 @@ str_pre_main:        .string "Jumping to coreboot.\r\n"
 
 #endif /* ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG */
 
-#if CONFIG_CBFS == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
-# if CONFIG_USE_FALLBACK_IMAGE == 1
 str_coreboot_ram_name:	.string "fallback/coreboot_ram"
-# else
+#else
 str_coreboot_ram_name:	.string "normal/coreboot_ram"
-# endif
 #endif
 
 #endif /* CONFIG_USE_DCACHE_RAM */

src/arch/i386/init/ldscript.lb

@@ -1,70 +0,0 @@
-/*
- *	Memory map:
- *
- *	CONFIG_RAMBASE		
- *				: data segment
- *				: bss segment
- *				: heap
- *				: stack
- *	CONFIG_ROMBASE
- *				: coreboot text 
- *				: readonly text
- */
-/*
- * Bootstrap code for the STPC Consumer
- * Copyright (c) 1999 by Net Insight AB. All Rights Reserved.
- *
- */
-
-/*
- *	Written by Johan Rydberg, based on work by Daniel Kahlin.
- *      Rewritten by Eric Biederman
- */
-/*
- *	We use ELF as output format. So that we can
- *	debug the code in some form. 
- */
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-
-/*
-ENTRY(_start)
-*/
-
-TARGET(binary)
-INPUT(coreboot_ram.rom)
-SECTIONS
-{
-	. = CONFIG_ROMBASE;
-
-	.ram . : {
-		_ram = . ;
-		coreboot_ram.rom(*)
-		_eram = . ;
-	}
-
-	/* This section might be better named .setup */
-	.rom . : {
-		_rom = .;
-		*(.rom.text);
-		*(.rom.data);
-		*(.rodata.*);
-		*(.rom.data.*);
-		. = ALIGN(16);
-		_erom = .;
-	}
-
-	_lrom = LOADADDR(.rom);
-	_elrom = LOADADDR(.rom) + SIZEOF(.rom);
-	_iseg = CONFIG_RAMBASE;
-	_eiseg = _iseg + SIZEOF(.ram);
-	_liseg = _ram;
-	_eliseg = _eram;
-
-	/DISCARD/ : {
-		*(.comment)
-		*(.comment.*)
-		*(.note)
-		*(.note.*)
-	}
-}

src/arch/i386/init/ldscript_fallback.lb

@@ -1,75 +0,0 @@
-/*
- *	Memory map:
- *
- *	CONFIG_RAMBASE		
- *				: data segment
- *				: bss segment
- *				: heap
- *				: stack
- *	CONFIG_ROMBASE
- *				: coreboot text 
- *				: readonly text
- */
-/*
- * Bootstrap code for the STPC Consumer
- * Copyright (c) 1999 by Net Insight AB. All Rights Reserved.
- *
- */
-
-/*
- *	Written by Johan Rydberg, based on work by Daniel Kahlin.
- *      Rewritten by Eric Biederman
- */
-/*
- *	We use ELF as output format. So that we can
- *	debug the code in some form. 
- */
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-
-/*
-ENTRY(_start)
-*/
-
-TARGET(binary)
-INPUT(coreboot_ram.rom)
-SECTIONS
-{
-	. = CONFIG_ROMBASE;
-
-	.ram . : {
-		_ram = . ;
-		coreboot_ram.rom(*)
-		_eram = . ;
-	}
-
-	/* cut _start into last 64k*/
-	_x = .;
-	. = (_x < (CONFIG_ROMBASE - 0x10000 +  CONFIG_ROM_IMAGE_SIZE)) ? (CONFIG_ROMBASE - 0x10000 +  CONFIG_ROM_IMAGE_SIZE) : _x;
-
-	/* This section might be better named .setup */
-	.rom . : {
-		_rom = .;
-		*(.rom.text);
-		*(.rom.data);
-		*(.init.rodata.*);
-		*(.rodata.*);
-		*(.rom.data.*);
-		. = ALIGN(16);
-		_erom = .;
-	}
-
-	_lrom = LOADADDR(.rom);
-	_elrom = LOADADDR(.rom) + SIZEOF(.rom);
-	_iseg = CONFIG_RAMBASE;
-	_eiseg = _iseg + SIZEOF(.ram);
-	_liseg = _ram;
-	_eliseg = _eram;
-
-	/DISCARD/ : {
-		*(.comment)
-		*(.note)
-		*(.comment.*)
-		*(.note.*)
-	}
-}

src/arch/i386/lib/Config.lb

@@ -1,7 +1,6 @@
 uses CONFIG_USE_INIT
 uses CONFIG_USE_PRINTK_IN_CAR
 uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_CBFS
 
 object c_start.S
 object cpu.c
@@ -15,9 +14,5 @@ initobject printk_init.o
 
 if CONFIG_USE_FAILOVER_IMAGE
 else
-	if CONFIG_CBFS
+	initobject cbfs_and_run.o
-		initobject cbfs_and_run.o
-	else
-		initobject copy_and_run.o
-	end
 end

src/arch/i386/lib/copy_and_run.c

@@ -1,53 +0,0 @@
-/* by yhlu 6.2005
-	moved from nrv2v.c and some lines from crt0.S
-   2006/05/02 - stepan: move nrv2b to an extra file.
-*/
-
-#include <console/console.h>
-#include <stdint.h>
-#include <string.h>
-
-#if CONFIG_COMPRESS
-#define ENDIAN   0
-#define BITSIZE 32
-#include "../lib/nrv2b.c"
-#endif
-
-void copy_and_run_core(u8 *src, u8 *dst, unsigned long ilen, unsigned ebp)
-{
-        unsigned long olen;
-
-#if CONFIG_USE_INIT
-	printk_spew("src=%08x\r\n",src);
-	printk_spew("dst=%08x\r\n",dst);
-#else
-        print_spew("src="); print_spew_hex32((uint32_t)src); print_spew("\r\n");
-        print_spew("dst="); print_spew_hex32((uint32_t)dst); print_spew("\r\n");
-#endif
-
-#if !CONFIG_COMPRESS
-	print_debug("Copying image to RAM.\r\n");
-	memcpy(src, dst, ilen);
-	olen = ilen;
-#else
-	print_debug("Uncompressing image to RAM.\r\n");
-//	dump_mem(src, src+0x100);
-	olen = unrv2b(src, dst, &ilen);
-#endif
-
-//	dump_mem(dst, dst+0x100);
-#if CONFIG_USE_INIT
-	printk_spew("image length = %08x\r\n", olen);
-#else
-	print_spew("image length = "); print_spew_hex32(olen); print_spew("\r\n");
-#endif
-	print_debug("Jumping to image.\r\n");
-
-	__asm__ volatile (
-		"movl %%eax, %%ebp\n\t"
-		"cli\n\t"
-		"jmp     *%%edi\n\t"
-		:: "a"(ebp), "D"(dst)
-	);
-
-}

src/arch/ppc/Config.lb

@@ -1,4 +1,3 @@
-uses CONFIG_CBFS
 ldscript init/ldscript.lb
 
 makerule coreboot.strip 
@@ -11,10 +10,8 @@ makerule coreboot.rom
 	action "cp $< $@"
 end
 
-if CONFIG_CBFS
+initobject /src/lib/cbfs.o
-	initobject /src/lib/cbfs.o
+initobject /src/lib/lzma.o
-	initobject /src/lib/lzma.o
-end
 
 dir init
 dir lib

src/boot/Config.lb

@@ -1,9 +1,2 @@
 object hardwaremain.o
-if CONFIG_CBFS
+object selfboot.o
-	object selfboot.o
-else
-	object elfboot.o
-end
-if CONFIG_FS_PAYLOAD
-	object filo.o
-end

src/boot/elfboot.c

@@ -1,687 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2003 Eric W. Biederman <ebiederm@xmission.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <part/fallback_boot.h>
-#include <boot/elf.h>
-#include <boot/elf_boot.h>
-#include <boot/coreboot_tables.h>
-#include <ip_checksum.h>
-#include <stream/read_bytes.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <string.h>
-
-/* Maximum physical address we can use for the coreboot bounce buffer.
- */
-#ifndef MAX_ADDR
-#define MAX_ADDR -1UL
-#endif
-
-extern unsigned char _ram_seg;
-extern unsigned char _eram_seg;
-
-struct segment {
-	struct segment *next;
-	struct segment *prev;
-	struct segment *phdr_next;
-	struct segment *phdr_prev;
-	unsigned long s_addr;
-	unsigned long s_memsz;
-	unsigned long s_offset;
-	unsigned long s_filesz;
-};
-
-struct verify_callback {
-	struct verify_callback *next;
-	int (*callback)(struct verify_callback *vcb, 
-		Elf_ehdr *ehdr, Elf_phdr *phdr, struct segment *head);
-	unsigned long desc_offset;
-	unsigned long desc_addr;
-};
-
-struct ip_checksum_vcb {
-	struct verify_callback data;
-	unsigned short ip_checksum;
-};
-
-int verify_ip_checksum(
-	struct verify_callback *vcb, 
-	Elf_ehdr *ehdr, Elf_phdr *phdr, struct segment *head)
-{
-	struct ip_checksum_vcb *cb;
-	struct segment *ptr;
-	unsigned long bytes;
-	unsigned long checksum;
-	unsigned char buff[2], *n_desc;
-	cb = (struct ip_checksum_vcb *)vcb;
-	/* zero the checksum so it's value won't
-	 * get in the way of verifying the checksum.
-	 */
-	n_desc = 0;
-	if (vcb->desc_addr) {
-		n_desc = (unsigned char *)(vcb->desc_addr);
-		memcpy(buff, n_desc, 2);
-		memset(n_desc, 0, 2);
-	}
-	bytes = 0;
-	checksum = compute_ip_checksum(ehdr, sizeof(*ehdr));
-	bytes += sizeof(*ehdr);
-	checksum = add_ip_checksums(bytes, checksum, 
-		compute_ip_checksum(phdr, ehdr->e_phnum*sizeof(*phdr)));
-	bytes += ehdr->e_phnum*sizeof(*phdr);
-	for(ptr = head->phdr_next; ptr != head; ptr = ptr->phdr_next) {
-		checksum = add_ip_checksums(bytes, checksum,
-			compute_ip_checksum((void *)ptr->s_addr, ptr->s_memsz));
-		bytes += ptr->s_memsz;
-	}
-	if (n_desc != 0) {
-		memcpy(n_desc, buff, 2);
-	}
-	if (checksum != cb->ip_checksum) {
-		printk_err("Image checksum: %04x != computed checksum: %04lx\n",
-			cb->ip_checksum, checksum);
-	}
-	return checksum == cb->ip_checksum;
-}
-
-/* The problem:  
- * Static executables all want to share the same addresses
- * in memory because only a few addresses are reliably present on
- * a machine, and implementing general relocation is hard.
- *
- * The solution:
- * - Allocate a buffer the size of the coreboot image plus additional
- *   required space.
- * - Anything that would overwrite coreboot copy into the lower part of
- *   the buffer. 
- * - After loading an ELF image copy coreboot to the top of the buffer.
- * - Then jump to the loaded image.
- * 
- * Benefits:
- * - Nearly arbitrary standalone executables can be loaded.
- * - Coreboot is preserved, so it can be returned to.
- * - The implementation is still relatively simple,
- *   and much simpler then the general case implemented in kexec.
- * 
- */
-
-static unsigned long bounce_size;
-
-static unsigned long get_bounce_buffer(struct lb_memory *mem)
-{
-	unsigned long lb_size;
-	unsigned long mem_entries;
-	unsigned long buffer;
-	int i;
-	lb_size = (unsigned long)(&_eram_seg - &_ram_seg);
-	/* Double coreboot size so I have somewhere to place a copy to return to */
-	bounce_size = lb_size;
-	lb_size = bounce_size + lb_size;
-	mem_entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]);
-	buffer = 0;
-	for(i = 0; i < mem_entries; i++) {
-		unsigned long mstart, mend;
-		unsigned long msize;
-		unsigned long tbuffer;
-		if (mem->map[i].type != LB_MEM_RAM)
-			continue;
-		if (unpack_lb64(mem->map[i].start) > MAX_ADDR)
-			continue;
-		if (unpack_lb64(mem->map[i].size) < lb_size)
-			continue;
-		mstart = unpack_lb64(mem->map[i].start);
-		msize = MAX_ADDR - mstart +1;
-		if (msize > unpack_lb64(mem->map[i].size))
-			msize = unpack_lb64(mem->map[i].size);
-		mend = mstart + msize;
-		tbuffer = mend - lb_size;
-		if (tbuffer < buffer) 
-			continue;
-		buffer = tbuffer;
-	}
-	return buffer;
-}
-
-
-static struct verify_callback *process_elf_notes(
-	unsigned char *header, 
-	unsigned long offset, unsigned long length)
-{
-	struct verify_callback *cb_chain;
-	unsigned char *note, *end;
-	unsigned char *program, *version;
-
-	cb_chain = 0;
-	note = header + offset;
-	end = note + length;
-	program = version = 0;
-	while(note < end) {
-		Elf_Nhdr *hdr;
-		unsigned char *n_name, *n_desc, *next;
-		hdr = (Elf_Nhdr *)note;
-		n_name = note + sizeof(*hdr);
-		n_desc = n_name + ((hdr->n_namesz + 3) & ~3);
-		next = n_desc + ((hdr->n_descsz + 3) & ~3);
-		if (next > end) {
-			break;
-		}
-		if ((hdr->n_namesz == sizeof(ELF_NOTE_BOOT)) && 
-			(memcmp(n_name, ELF_NOTE_BOOT, sizeof(ELF_NOTE_BOOT)) == 0)) {
-			switch(hdr->n_type) {
-			case EIN_PROGRAM_NAME:
-				if (n_desc[hdr->n_descsz -1] == 0) {
-					program = n_desc;
-				}
-				break;
-			case EIN_PROGRAM_VERSION:
-				if (n_desc[hdr->n_descsz -1] == 0) {
-					version = n_desc;
-				}
-				break;
-			case EIN_PROGRAM_CHECKSUM:
-			{
-				struct ip_checksum_vcb *cb;
-				cb = malloc(sizeof(*cb));
-				cb->ip_checksum = *((uint16_t *)n_desc);
-				cb->data.callback = verify_ip_checksum;
-				cb->data.next = cb_chain;
-				cb->data.desc_offset = n_desc - header;
-				cb_chain = &cb->data;
-				break;
-			}
-			}
-		}
-		printk_spew("n_type: %08x n_name(%d): %-*.*s n_desc(%d): %-*.*s\n", 
-			hdr->n_type,
-			hdr->n_namesz, hdr->n_namesz, hdr->n_namesz, n_name,
-			hdr->n_descsz,hdr->n_descsz, hdr->n_descsz, n_desc);
-		note = next;
-	}
-	if (program && version) {
-		printk_info("Loading %s version: %s\n",
-			program, version);
-	}
-	return cb_chain;
-}
-
-static int valid_area(struct lb_memory *mem, unsigned long buffer,
-	unsigned long start, unsigned long len)
-{
-	/* Check through all of the memory segments and ensure
-	 * the segment that was passed in is completely contained
-	 * in RAM.
-	 */
-	int i;
-	unsigned long end = start + len;
-	unsigned long mem_entries = (mem->size - sizeof(*mem))/sizeof(mem->map[0]);
-
-	/* See if I conflict with the bounce buffer */
-	if (end >= buffer) {
-		return 0;
-	}
-
-	/* Walk through the table of valid memory ranges and see if I
-	 * have a match.
-	 */
-	for(i = 0; i < mem_entries; i++) {
-		uint64_t mstart, mend;
-		uint32_t mtype;
-		mtype = mem->map[i].type;
-		mstart = unpack_lb64(mem->map[i].start);
-		mend = mstart + unpack_lb64(mem->map[i].size);
-		if ((mtype == LB_MEM_RAM) && (start < mend) && (end > mstart)) {
-			break;
-		}
-		if ((mtype == LB_MEM_TABLE) && (start < mend) && (end > mstart)) {
-			printk_err("Payload is overwriting Coreboot tables.\n");
-			break;
-		}
-	}
-	if (i == mem_entries) {
-		printk_err("No matching ram area found for range:\n");
-		printk_err("  [0x%016lx, 0x%016lx)\n", start, end);
-		printk_err("Ram areas\n");
-		for(i = 0; i < mem_entries; i++) {
-			uint64_t mstart, mend;
-			uint32_t mtype;
-			mtype = mem->map[i].type;
-			mstart = unpack_lb64(mem->map[i].start);
-			mend = mstart + unpack_lb64(mem->map[i].size);
-			printk_err("  [0x%016lx, 0x%016lx) %s\n",
-				(unsigned long)mstart, 
-				(unsigned long)mend, 
-				(mtype == LB_MEM_RAM)?"RAM":"Reserved");
-			
-		}
-		return 0;
-	}
-	return 1;
-}
-
-static void relocate_segment(unsigned long buffer, struct segment *seg)
-{
-	/* Modify all segments that want to load onto coreboot
-	 * to load onto the bounce buffer instead.
-	 */
-	unsigned long lb_start = (unsigned long)&_ram_seg;
-	unsigned long lb_end = (unsigned long)&_eram_seg;
-	unsigned long start, middle, end;
-
-	printk_spew("lb: [0x%016lx, 0x%016lx)\n", 
-		lb_start, lb_end);
-
-	start = seg->s_addr;
-	middle = start + seg->s_filesz;
-	end = start + seg->s_memsz;
-	/* I don't conflict with coreboot so get out of here */
-	if ((end <= lb_start) || (start >= lb_end))
-		return;
-
-	printk_spew("segment: [0x%016lx, 0x%016lx, 0x%016lx)\n", 
-		start, middle, end);
-
-	/* Slice off a piece at the beginning
-	 * that doesn't conflict with coreboot.
-	 */
-	if (start < lb_start) {
-		struct segment *new;
-		unsigned long len = lb_start - start;
-		new = malloc(sizeof(*new));
-		*new = *seg;
-		new->s_memsz = len;
-		seg->s_memsz -= len;
-		seg->s_addr += len;
-		seg->s_offset += len;
-		if (seg->s_filesz > len) {
-			new->s_filesz = len;
-			seg->s_filesz -= len;
-		} else {
-			seg->s_filesz = 0;
-		}
-
-		/* Order by stream offset */
-		new->next = seg;
-		new->prev = seg->prev;
-		seg->prev->next = new;
-		seg->prev = new;
-		/* Order by original program header order */
-		new->phdr_next = seg;
-		new->phdr_prev = seg->phdr_prev;
-		seg->phdr_prev->phdr_next = new;
-		seg->phdr_prev = new;
-
-		/* compute the new value of start */
-		start = seg->s_addr;
-		
-		printk_spew("   early: [0x%016lx, 0x%016lx, 0x%016lx)\n", 
-			new->s_addr, 
-			new->s_addr + new->s_filesz,
-			new->s_addr + new->s_memsz);
-	}
-	
-	/* Slice off a piece at the end 
-	 * that doesn't conflict with coreboot 
-	 */
-	if (end > lb_end) {
-		unsigned long len = lb_end - start;
-		struct segment *new;
-		new = malloc(sizeof(*new));
-		*new = *seg;
-		seg->s_memsz = len;
-		new->s_memsz -= len;
-		new->s_addr += len;
-		new->s_offset += len;
-		if (seg->s_filesz > len) {
-			seg->s_filesz = len;
-			new->s_filesz -= len;
-		} else {
-			new->s_filesz = 0;
-		}
-		/* Order by stream offset */
-		new->next = seg->next;
-		new->prev = seg;
-		seg->next->prev = new;
-		seg->next = new;
-		/* Order by original program header order */
-		new->phdr_next = seg->phdr_next;
-		new->phdr_prev = seg;
-		seg->phdr_next->phdr_prev = new;
-		seg->phdr_next = new;
-
-		printk_spew("   late: [0x%016lx, 0x%016lx, 0x%016lx)\n", 
-			new->s_addr, 
-			new->s_addr + new->s_filesz,
-			new->s_addr + new->s_memsz);
-		
-	}
-	/* Now retarget this segment onto the bounce buffer */
-	seg->s_addr = buffer + (seg->s_addr - lb_start);
-
-	printk_spew(" bounce: [0x%016lx, 0x%016lx, 0x%016lx)\n", 
-		seg->s_addr, 
-		seg->s_addr + seg->s_filesz, 
-		seg->s_addr + seg->s_memsz);
-}
-
-
-static int build_elf_segment_list(
-	struct segment *head, 
-	unsigned long bounce_buffer, struct lb_memory *mem,
-	Elf_phdr *phdr, int headers)
-{
-	struct segment *ptr;
-	int i;
-	memset(head, 0, sizeof(*head));
-	head->phdr_next = head->phdr_prev = head;
-	head->next = head->prev = head;
-	for(i = 0; i < headers; i++) {
-		struct segment *new;
-		/* Ignore data that I don't need to handle */
-		if (phdr[i].p_type != PT_LOAD) {
-			printk_debug("Dropping non PT_LOAD segment\n");
-			continue;
-		}
-		if (phdr[i].p_memsz == 0) {
-			printk_debug("Dropping empty segment\n");
-			continue;
-		}
-		new = malloc(sizeof(*new));
-		new->s_addr = phdr[i].p_paddr;
-		new->s_memsz = phdr[i].p_memsz;
-		new->s_offset = phdr[i].p_offset;
-		new->s_filesz = phdr[i].p_filesz;
-		printk_debug("New segment addr 0x%lx size 0x%lx offset 0x%lx filesize 0x%lx\n",
-			new->s_addr, new->s_memsz, new->s_offset, new->s_filesz);
-		/* Clean up the values */
-		if (new->s_filesz > new->s_memsz)  {
-			new->s_filesz = new->s_memsz;
-		}
-		printk_debug("(cleaned up) New segment addr 0x%lx size 0x%lx offset 0x%lx filesize 0x%lx\n",
-			new->s_addr, new->s_memsz, new->s_offset, new->s_filesz);
-		for(ptr = head->next; ptr != head; ptr = ptr->next) {
-			if (new->s_offset < ptr->s_offset)
-				break;
-		}
-		/* Order by stream offset */
-		new->next = ptr;
-		new->prev = ptr->prev;
-		ptr->prev->next = new;
-		ptr->prev = new;
-		/* Order by original program header order */
-		new->phdr_next = head;
-		new->phdr_prev = head->phdr_prev;
-		head->phdr_prev->phdr_next  = new;
-		head->phdr_prev = new;
-
-		/* Verify the memory addresses in the segment are valid */
-		if (!valid_area(mem, bounce_buffer, new->s_addr, new->s_memsz)) 
-			goto out;
-
-		/* Modify the segment to load onto the bounce_buffer if necessary.
-		 */
-		relocate_segment(bounce_buffer, new);
-	}
-	return 1;
- out:
-	return 0;
-}
-
-static int load_elf_segments(
-	struct segment *head, unsigned char *header, unsigned long header_size)
-{
-	unsigned long offset;
-	struct segment *ptr;
-	
-	offset = 0;
-	for(ptr = head->next; ptr != head; ptr = ptr->next) {
-		unsigned long start_offset;
-		unsigned long skip_bytes, read_bytes;
-		unsigned char *dest, *middle, *end;
-		byte_offset_t result;
-		printk_debug("Loading Segment: addr: 0x%016lx memsz: 0x%016lx filesz: 0x%016lx\n",
-			ptr->s_addr, ptr->s_memsz, ptr->s_filesz);
-		
-		/* Compute the boundaries of the segment */
-		dest = (unsigned char *)(ptr->s_addr);
-		end = dest + ptr->s_memsz;
-		middle = dest + ptr->s_filesz;
-		start_offset = ptr->s_offset;
-		/* Ignore s_offset if I have a pure bss segment */
-		if (ptr->s_filesz == 0) {
-			start_offset = offset;
-		}
-		
-		printk_spew("[ 0x%016lx, %016lx, 0x%016lx) <- %016lx\n",
-			(unsigned long)dest,
-			(unsigned long)middle,
-			(unsigned long)end,
-			(unsigned long)start_offset);
-		
-		/* Skip intial buffer unused bytes */
-		if (offset < header_size) {
-			if (start_offset < header_size) {
-				offset = start_offset;
-			} else {
-				offset = header_size;
-			}
-		}
-		
-		/* Skip the unused bytes */
-		skip_bytes = start_offset - offset;
-		if (skip_bytes && 
-			((result = stream_skip(skip_bytes)) != skip_bytes)) {
-			printk_err("ERROR: Skip of %ld bytes skipped %ld bytes\n",
-				skip_bytes, result);
-			goto out;
-		}
-		offset = start_offset;
-		
-		/* Copy data from the initial buffer */
-		if (offset < header_size) {
-			size_t len;
-			if ((ptr->s_filesz + start_offset) > header_size) {
-				len = header_size - start_offset;
-			}
-			else {
-				len = ptr->s_filesz;
-			}
-			memcpy(dest, &header[start_offset], len);
-			dest += len;
-		}
-		
-		/* Read the segment into memory */
-		read_bytes = middle - dest;
-		if (read_bytes && 
-			((result = stream_read(dest, read_bytes)) != read_bytes)) {
-			printk_err("ERROR: Read of %ld bytes read %ld bytes...\n",
-				read_bytes, result);
-			goto out;
-		}
-		offset += ptr->s_filesz;
-		
-		/* Zero the extra bytes between middle & end */
-		if (middle < end) {
-			printk_debug("Clearing Segment: addr: 0x%016lx memsz: 0x%016lx\n",
-				(unsigned long)middle, (unsigned long)(end - middle));
-			
-			/* Zero the extra bytes */
-			memset(middle, 0, end - middle);
-		}
-	}
-	return 1;
- out:
-	return 0;
-}
-
-static int verify_loaded_image(
-	struct verify_callback *vcb,
-	Elf_ehdr *ehdr, Elf_phdr *phdr,
-	struct segment *head
-	)
-{
-	struct segment *ptr;
-	int ok;
-	ok = 1;
-	for(; ok && vcb ; vcb = vcb->next) {
-		/* Find where the note is loaded */
-		/* The whole note must be loaded intact
-		 * so an address of 0 for the descriptor is impossible
-		 */
-		vcb->desc_addr = 0; 
-		for(ptr = head->next; ptr != head; ptr = ptr->next) {
-			unsigned long desc_addr;
-			desc_addr = ptr->s_addr + vcb->desc_offset - ptr->s_offset;
-			if ((desc_addr >= ptr->s_addr) &&
-				(desc_addr < (ptr->s_addr + ptr->s_filesz))) {
-				vcb->desc_addr = desc_addr;
-			}
-		}
-		ok = vcb->callback(vcb, ehdr, phdr, head);
-	}
-	return ok;
-}
-
-int elfload(struct lb_memory *mem,
-	unsigned char *header, unsigned long header_size)
-{
-	Elf_ehdr *ehdr;
-	Elf_phdr *phdr;
-	void *entry;
-	struct segment head;
-	struct verify_callback *cb_chain;
-	unsigned long bounce_buffer;
-
-	/* Find a bounce buffer so I can load to coreboot's current location */
-	bounce_buffer = get_bounce_buffer(mem);
-	if (!bounce_buffer) {
-		printk_err("Could not find a bounce buffer...\n");
-		goto out;
-	}
-
-	ehdr = (Elf_ehdr *)header;
-	entry = (void *)(ehdr->e_entry);
-	phdr = (Elf_phdr *)(&header[ehdr->e_phoff]);
-
-	/* Digest elf note information... */
-	cb_chain = 0;
-	if ((phdr[0].p_type == PT_NOTE) && 
-		((phdr[0].p_offset + phdr[0].p_filesz) < header_size)) {
-		cb_chain = process_elf_notes(header,
-			phdr[0].p_offset, phdr[0].p_filesz);
-	}
-
-	/* Preprocess the elf segments */
-	if (!build_elf_segment_list(&head, 
-		bounce_buffer, mem, phdr, ehdr->e_phnum))
-		goto out;
-
-	/* Load the segments */
-	if (!load_elf_segments(&head, header, header_size))
-		goto out;
-
-	printk_spew("Loaded segments\n");
-	/* Verify the loaded image */
-	if (!verify_loaded_image(cb_chain, ehdr, phdr, &head)) 
-		goto out;
-
-	printk_spew("verified segments\n");
-	/* Shutdown the stream device */
-	stream_fini();
-	
-	printk_spew("closed down stream\n");
-	/* Reset to booting from this image as late as possible */
-	boot_successful();
-
-	printk_debug("Jumping to boot code at %p\n", entry);
-	post_code(0xfe);
-
-	/* Jump to kernel */
-	jmp_to_elf_entry(entry, bounce_buffer, bounce_size);
-	return 1;
-
- out:
-	return 0;
-}
-
-int elfboot(struct lb_memory *mem)
-{
-	Elf_ehdr *ehdr;
-	static unsigned char header[ELF_HEAD_SIZE];
-	int header_offset;
-	int i, result;
-
-	result = 0;
-	printk_debug("\nelfboot: Attempting to load payload.\n");
-	post_code(0xf8);
-
-	if (stream_init() < 0) {
-		printk_err("Could not initialize driver...\n");
-		goto out;
-	}
-
-	/* Read in the initial ELF_HEAD_SIZE bytes */
-	if (stream_read(header, ELF_HEAD_SIZE) != ELF_HEAD_SIZE) {
-		printk_err("Read failed...\n");
-		goto out;
-	}
-	/* Scan for an elf header */
-	header_offset = -1;
-	for(i = 0; i < ELF_HEAD_SIZE - (sizeof(Elf_ehdr) + sizeof(Elf_phdr)); i+=16) {
-		ehdr = (Elf_ehdr *)(&header[i]);
-		if (memcmp(ehdr->e_ident, ELFMAG, 4) != 0) {
-			printk_debug("No header at %d\n", i);
-			continue;
-		}
-		printk_debug("Found ELF candidate at offset %d\n", i);
-		/* Sanity check the elf header */
-		if ((ehdr->e_type == ET_EXEC) &&
-			elf_check_arch(ehdr) &&
-			(ehdr->e_ident[EI_VERSION] == EV_CURRENT) &&
-			(ehdr->e_version == EV_CURRENT) &&
-			(ehdr->e_ehsize == sizeof(Elf_ehdr)) &&
-			(ehdr->e_phentsize = sizeof(Elf_phdr)) &&
-			(ehdr->e_phoff < (ELF_HEAD_SIZE - i)) &&
-			((ehdr->e_phoff + (ehdr->e_phentsize * ehdr->e_phnum)) <= 
-				(ELF_HEAD_SIZE - i))) {
-			header_offset = i;
-			break;
-		}
-		ehdr = 0;
-	}
-	printk_debug("header_offset is %d\n", header_offset);
-	if (header_offset == -1) {
-		goto out;
-	}
-
-	printk_debug("Try to load at offset 0x%x\n", header_offset);
-	result = elfload(mem, 
-		header + header_offset , ELF_HEAD_SIZE - header_offset);
- out:
-	if (!result) {
-		/* Shutdown the stream device */
-		stream_fini();
-
-		printk_err("Can not load ELF Image.\n");
-
-		post_code(0xff);
-	}
-	return 0;
-
-}

src/boot/filo.c

@@ -1,194 +0,0 @@
-/*
- * Copyright (C) 2003 by SONE Takeshi <ts1@tsn.or.jp> and others.
- * This program is licensed under the terms of GNU General Public License.
- *
- * Modified for coreboot by Greg Watson <gwatson@lanl.gov>
- */
-
-#include <console/console.h>
-#include <delay.h>
-#include <string.h>
-#include <boot/tables.h>
-#include <boot/elf.h>
-
-#define ENTER '\r'
-#define ESCAPE '\x1b'
-
-#ifndef CONFIG_AUTOBOOT_CMDLINE
-#define autoboot(mem)
-#endif
-
-#if !CONFIG_AUTOBOOT_DELAY
-#define autoboot_delay() 0 /* success */
-#endif
-
-#define havechar() console_tst_byte()
-#define putchar(c) console_tx_byte(c)
-#define getchar(c) console_rx_byte(c)
-
-extern char *boot_file;
-
-int getline(char *buf, int max)
-{
-    int cur, ch, nonspace_seen;
-
-    cur = 0;
-    while (buf[cur]) {
-	putchar(buf[cur]);
-	cur++;
-    }
-    for (;;) {
-	ch = getchar();
-	switch (ch) {
-	/* end of line */
-	case '\r':
-	case '\n':
-	    putchar('\n');
-	    goto out;
-	/* backspace */
-	case '\b':
-	case '\x7f':
-	    if (cur > 0) {
-		cur--;
-		putchar('\b');
-		putchar(' ');
-		putchar('\b');
-	    }
-	    break;
-	/* word erase */
-	case 'W' & 0x1f: /* ^W */
-	    nonspace_seen = 0;
-	    while (cur) {
-		if (buf[cur-1] != ' ')
-		    nonspace_seen = 1;
-		putchar('\b');
-		putchar(' ');
-		putchar('\b');
-		cur--;
-		if (nonspace_seen && cur < max-1 && cur > 0 && buf[cur-1]==' ')
-		    break;
-	    }
-	    break;
-	/* line erase */
-	case 'U' & 0x1f: /* ^U */
-	    while (cur) {
-		putchar('\b');
-		putchar(' ');
-		putchar('\b');
-		cur--;
-	    }
-	    cur = 0;
-	    break;
-	default:
-	    if (ch < 0x20)
-		break; /* ignore control char */
-	    if (ch >= 0x7f)
-		break;
-	    if (cur + 1 < max) {
-		putchar(ch); /* echo back */
-		buf[cur] = ch;
-		cur++;
-	    }
-	}
-    }
-out:
-    if (cur >= max)
-	cur = max - 1;
-    buf[cur] = '\0';
-    return cur;
-}
-
-static void boot(struct lb_memory *mem, const char *line)
-{
-    char *param;
-
-    /* Split filename and parameter */
-    boot_file = strdup(line);
-    param = strchr(boot_file, ' ');
-    if (param) {
-	*param = '\0';
-	param++;
-    }
-
-    if (!elfboot(mem))
-	printk_info("Unsupported image format\n");
-    free(boot_file);
-}
-
-#ifdef CONFIG_AUTOBOOT_CMDLINE
-#if CONFIG_AUTOBOOT_DELAY
-static inline int autoboot_delay(void)
-{
-    unsigned int timeout;
-    int sec, tmp;
-    char key;
-    
-    key = 0;
-
-    printk_info("Press <Enter> for default boot, or <Esc> for boot prompt... ");
-    for (sec = CONFIG_AUTOBOOT_DELAY; sec>0 && key==0; sec--) {
-	printk_info("%d", sec);
-	timeout = 10;
-	while (timeout-- > 0) {
-	    if (havechar()) {
-		key = getchar();
-		if (key==ENTER || key==ESCAPE)
-		    break;
-	    }
-	    mdelay(100);
-	}
-	for (tmp = sec; tmp; tmp /= 10)
-	    printk_info("\b \b");
-    }
-    if (key == 0) {
-	printk_info("timed out\n");
-	return 0; /* success */
-    } else {
-	putchar('\n');
-	if (key == ESCAPE)
-	    return -1; /* canceled */
-	else
-	    return 0; /* default accepted */
-    }
-}
-#endif /* CONFIG_AUTOBOOT_DELAY */
-
-static void autoboot(struct lb_memory *mem)
-{
-    /* If Escape key is pressed already, skip autoboot */
-    if (havechar() && getchar()==ESCAPE)
-	return;
-
-    if (autoboot_delay()==0) {
-	printk_info("boot: %s\n", CONFIG_AUTOBOOT_CMDLINE);
-	boot(mem, CONFIG_AUTOBOOT_CMDLINE);
-    }
-}
-#endif /* CONFIG_AUTOBOOT_CMDLINE */
-
-/* The main routine */
-int filo(struct lb_memory *mem)
-{
-    char line[256];
-
-    printk_info("FILO version 0.4.1\n");
-
-    /* Try default image */
-    autoboot(mem);
-
-    /* The above didn't work, ask user */
-    while (havechar())
-	getchar();
-#ifdef CONFIG_AUTOBOOT_CMDLINE
-    strncpy(line, CONFIG_AUTOBOOT_CMDLINE, sizeof(line)-1);
-    line[sizeof(line)-1] = '\0';
-#else
-    line[0] = '\0';
-#endif
-    for (;;) {
-	printk_info("boot: ");
-	getline(line, sizeof line);
-	if (line[0])
-	    boot(mem, line);
-    }
-}

src/boot/hardwaremain.c

@@ -96,21 +96,10 @@ void hardwaremain(int boot_complete)
 	 * write our configuration tables.
 	 */
 	lb_mem = write_tables();
-#if CONFIG_CBFS == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
-# if CONFIG_USE_FALLBACK_IMAGE == 1
 	cbfs_load_payload(lb_mem, "fallback/payload");
-# else
+#else
 	cbfs_load_payload(lb_mem, "normal/payload");
-# endif
-#else
-
-#if CONFIG_FS_PAYLOAD == 1
-#warning "CONFIG_FS_PAYLOAD is deprecated."
-	filo(lb_mem);
-#else
-#warning "elfboot will soon be deprecated."
-	elfboot(lb_mem);
-#endif
 #endif
 	printk(BIOS_ERR, "Boot failed.\n");
 }

src/config/Config.lb

@@ -215,7 +215,6 @@ end
 # for now, this is just 'lib', but it may be more later. 
 dir /lib
 dir /console
-dir /stream
 dir /devices
 dir /pc80
 dir /boot

src/config/Options.lb

@@ -641,11 +641,6 @@ define CONFIG_MULTIBOOT
 	export always
 	comment "Use Multiboot (rather than ELF boot notes) to boot the payload"
 end
-define CONFIG_IDE_PAYLOAD
-	default 0
-	export always
-	comment "Boot from IDE device"
-end
 define CONFIG_ROM_PAYLOAD
 	default 0
 	export always
@@ -672,47 +667,6 @@ define CONFIG_PRECOMPRESSED_PAYLOAD
 	export always
 	comment "boot image is already compressed" 
 end
-define CONFIG_SERIAL_PAYLOAD
-	default 0
-	export always
-	comment "Download boot image from serial port"
-end
-define CONFIG_FS_PAYLOAD
-	default 0
-	export always
-	comment "Boot from a filesystem"
-end
-define CONFIG_FS_EXT2
-	default 0
-	export always
-	comment "Enable ext2 filesystem support"
-end
-define CONFIG_FS_ISO9660
-	default 0
-	export always
-	comment "Enable ISO9660 filesystem support"
-end
-define CONFIG_FS_FAT
-	default 0
-	export always
-	comment "Enable FAT filesystem support"
-end
-define CONFIG_CBFS
-	default 1
-	export always
-	comment "The new CBFS file system"
-end
-define CONFIG_AUTOBOOT_DELAY
-	default 2
-	export always
-	comment "Delay (in seconds) before autobooting"
-end
-define CONFIG_AUTOBOOT_CMDLINE
-	default "hdc1:/vmlinuz root=/dev/hdc3 console=tty0 console=ttyS0,115200"
-	export always
-	format "\"%s\""
-	comment "Default command line when autobooting"
-end
 
 define CONFIG_USE_WATCHDOG_ON_BOOT
 	default 0

src/config/failovercalculation.lb

@@ -10,13 +10,8 @@ else
 	default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
 	default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE )
     else
-	if CONFIG_CBFS
+	default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
-		default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
+	default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE )
-		default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE )
-	else
-		default CONFIG_ROM_SECTION_SIZE   = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FAILOVER_SIZE )
-		default CONFIG_ROM_SECTION_OFFSET = 0
-	end
     end
 end
 

src/config/nofailovercalculation.lb

@@ -6,13 +6,8 @@ if CONFIG_USE_FALLBACK_IMAGE
 	default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
 	default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE )
 else
-	if CONFIG_CBFS
+	default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
-		default CONFIG_ROM_SECTION_SIZE   = CONFIG_FALLBACK_SIZE
+	default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE )
-		default CONFIG_ROM_SECTION_OFFSET = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE - CONFIG_FALLBACK_SIZE )
-	else
-		default CONFIG_ROM_SECTION_SIZE   = ( CONFIG_ROM_SIZE - CONFIG_FALLBACK_SIZE )
-		default CONFIG_ROM_SECTION_OFFSET = 0
-	end
 end
 
 ##

src/cpu/amd/car/copy_and_run.c

@@ -3,16 +3,15 @@
    2006/05/02 - stepan: move nrv2b to an extra file.
 */
 
-#if CONFIG_CBFS == 1
 void cbfs_and_run_core(const char*, unsigned ebp);
 
 static void copy_and_run(void)
 {
-# if CONFIG_USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 	cbfs_and_run_core("fallback/coreboot_ram", 0);
-# else
+#else
       	cbfs_and_run_core("normal/coreboot_ram", 0);
-# endif
+#endif
 }
 
 #if CONFIG_AP_CODE_IN_CAR == 1
@@ -26,38 +25,3 @@ static void copy_and_run_ap_code_in_car(unsigned ret_addr)
 # endif
 }
 #endif
-
-#else
-void copy_and_run_core(u8 *src, u8 *dst, unsigned long ilen, unsigned ebp);
-
-extern u8 _liseg, _iseg, _eiseg;
-
-static void copy_and_run(void)
-{
-	uint8_t *src, *dst; 
-        unsigned long ilen;
-
-	src = &_liseg;
-	dst = &_iseg;
-	ilen = &_eiseg - dst;
-
-	copy_and_run_core(src, dst, ilen, 0);
-}
-
-#if CONFIG_AP_CODE_IN_CAR == 1
-
-extern u8 _liseg_apc, _iseg_apc, _eiseg_apc;
-
-static void copy_and_run_ap_code_in_car(unsigned ret_addr)
-{
-        uint8_t *src, *dst;
-        unsigned long ilen;
-
-	src = &_liseg_apc;
-	dst = &_iseg_apc;
-	ilen = &_eiseg_apc - dst;
-
-	copy_and_run_core(src, dst, ilen, ret_addr);
-}
-#endif
-#endif

src/cpu/amd/model_lx/cache_as_ram.inc

@@ -222,19 +222,8 @@ __main:
 	movl	$0x4000000, %esp
 	movl	%esp, %ebp
 	pushl	%esi
-#if CONFIG_CBFS == 1
 	pushl $str_coreboot_ram_name
 	call cbfs_and_run_core
-#else
-	movl	$_liseg, %esi
-	movl	$_iseg,  %edi
-	movl	$_eiseg, %ecx
-	subl	%edi, %ecx
-	pushl	%ecx
-	pushl	%edi
-	pushl	%esi
-	call copy_and_run_core
-#endif
 
 .Lhlt:
 	intel_chip_post_macro(0xee)	/* post fail ee */
@@ -295,10 +284,8 @@ str_pre_main:        .string "Jumping to coreboot.\r\n"
 .previous
 
 #endif /* ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG */
-#if CONFIG_CBFS == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
-# if CONFIG_USE_FALLBACK_IMAGE == 1
 str_coreboot_ram_name:	.string "fallback/coreboot_ram"
-# else
+#else
 str_coreboot_ram_name:	.string "normal/coreboot_ram"
-# endif
 #endif

src/cpu/x86/car/copy_and_run.c

@@ -2,7 +2,6 @@
    (Written by Patrick Georgi <patrick.georgi@coresystems.de> for coresystems GmbH
 */
 
-#if CONFIG_CBFS == 1
 void cbfs_and_run_core(char*, unsigned ebp);
 
 static void copy_and_run(unsigned cpu_reset)
@@ -10,32 +9,9 @@ static void copy_and_run(unsigned cpu_reset)
 	if (cpu_reset == 1) cpu_reset = -1;
 	else cpu_reset = 0;
 
-# if CONFIG_USE_FALLBACK_IMAGE == 1
+#if CONFIG_USE_FALLBACK_IMAGE == 1
 	cbfs_and_run_core("fallback/coreboot_ram", cpu_reset);
-# else
-	cbfs_and_run_core("normal/coreboot_ram", cpu_reset);
-# endif
-}
-
 #else
-void copy_and_run_core(u8 *src, u8 *dst, unsigned long ilen, unsigned ebp);
+	cbfs_and_run_core("normal/coreboot_ram", cpu_reset);
-
-extern u8 _liseg, _iseg, _eiseg;
-
-static void copy_and_run(unsigned cpu_reset)
-{
-	uint8_t *src, *dst; 
-        unsigned long ilen;
-
-
-	src = &_liseg;
-	dst = &_iseg;
-	ilen = &_eiseg - dst;
-
-	if (cpu_reset == 1) cpu_reset = -1;
-	else cpu_reset = 0;
-
-	copy_and_run_core(src, dst, ilen, cpu_reset);
-}
 #endif
-
+}

src/devices/pci_rom.c

@@ -35,22 +35,17 @@ struct rom_header * pci_rom_probe(struct device *dev)
 	struct rom_header *rom_header;
 	struct pci_data *rom_data;
 
-	if (CONFIG_CBFS) {
+	void *v;
-		void *v;
+	/* if it's in FLASH, then it's as if dev->on_mainboard was true */
-		/* if it's in FLASH, then it's as if dev->on_mainboard was true */
+	v = cbfs_load_optionrom(dev->vendor, dev->device, NULL);
-		v = cbfs_load_optionrom(dev->vendor, dev->device, NULL);
+	printk_debug("In cbfs, rom address for %s = %p\n", 
-		printk_debug("In cbfs, rom address for %s = %p\n", 
+			dev_path(dev), v);
-				dev_path(dev), v);
+	if (v) {
-		if (v) {
+		dev->rom_address = (u32)v;
-			dev->rom_address = (u32)v;
+		dev->on_mainboard = 1;
-			dev->on_mainboard = 1;
+	}
-		}
-	} 
 
 	if (dev->on_mainboard) {
-		/* this is here as a legacy path. We hope it goes away soon. Users should not have to 
-		 * compute the ROM address at build time!
-		 */
                 // in case some device PCI_ROM_ADDRESS can not be set or readonly 
 		rom_address = dev->rom_address;
 		printk_debug("On mainboard, rom address for %s = %lx\n", 

src/lib/Config.lb

@@ -27,11 +27,5 @@ initobject memset.o
 initobject memcpy.o
 initobject memcmp.o
 
-if CONFIG_CBFS
+object cbfs.o
-	object cbfs.o
+object lzma.o
-	object lzma.o
-end
-
-if CONFIG_COMPRESSED_PAYLOAD_LZMA
-	object lzma.o
-end

src/mainboard/a-trend/atc-6220/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/a-trend/atc-6240/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/abit/be6-ii_v2_0/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -98,9 +97,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9	# Override this in targets/*/Config.
 default CONFIG_CONSOLE_VGA = 1		# Override this in targets/*/Config.lb.
 default CONFIG_PCI_ROM_RUN = 1		# Override this in targets/*/Config.lb.
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/advantech/pcm-5820/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,9 +102,4 @@ default CONFIG_TTYS0_LCS = 0x3		# 8n1
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/amd/db800/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -180,10 +179,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/amd/dbm690t/Options.lb

@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -301,9 +300,4 @@ default CONFIG_GFXUMA=1
 default CONFIG_HAVE_MAINBOARD_RESOURCES=1
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/amd/norwich/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -180,10 +179,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/amd/pistachio/Options.lb

@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -299,9 +298,4 @@ default CONFIG_GFXUMA=1
 default CONFIG_HAVE_MAINBOARD_RESOURCES=1
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/amd/rumba/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -159,10 +158,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/amd/serengeti_cheetah/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -325,9 +324,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/amd/serengeti_cheetah_fam10/Options.lb

@@ -18,7 +18,6 @@
 #
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -362,9 +361,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/arima/hdama/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -242,9 +241,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/artecgroup/dbe61/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -180,10 +179,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asi/mb_5blgp/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,9 +102,4 @@ default CONFIG_TTYS0_LCS = 0x3		# 8n1
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asi/mb_5blmp/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_PIRQ_TABLE
-uses CONFIG_CBFS
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
 uses CONFIG_HAVE_HARD_RESET
@@ -161,10 +160,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
 # default CONFIG_PCI_ROM_RUN=1
 default CONFIG_VIDEO_MB = 0
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asus/a8n_e/Options.lb

@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_USE_FAILOVER_IMAGE
@@ -167,9 +166,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asus/a8v-e_se/Options.lb

@@ -18,7 +18,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -167,9 +166,4 @@ default CONFIG_TTYS0_LCS = 0x3		# 8n1
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asus/m2v-mx_se/Options.lb

@@ -18,7 +18,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -176,9 +175,4 @@ default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
 
 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
 default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asus/mew-am/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9	# Override this in targets/*/Config.
 default CONFIG_CONSOLE_VGA = 1		# Override this in targets/*/Config.lb.
 default CONFIG_PCI_ROM_RUN = 1		# Override this in targets/*/Config.lb.
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asus/mew-vm/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -158,9 +157,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
 
 default CONFIG_UDELAY_TSC=1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asus/p2b-d/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,5 +102,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_CBFS=1
 end

src/mainboard/asus/p2b-ds/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -104,9 +103,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asus/p2b-f/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asus/p2b/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -98,9 +97,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/asus/p3b-f/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/axus/tc320/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,9 +102,4 @@ default CONFIG_TTYS0_LCS = 0x3		# 8n1
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/azza/pt-6ibd/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/bcom/winnet100/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,9 +102,4 @@ default CONFIG_TTYS0_LCS = 0x3		# 8n1
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 6
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 6
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/bcom/winnetp680/Options.lb

@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -103,10 +102,4 @@ default HOSTCC = "gcc"
 ##
 default CONFIG_MAX_PCI_BUSES = 3
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/biostar/m6tba/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/broadcom/blast/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -260,9 +259,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/compaq/deskpro_en_sff_p600/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/dell/s1850/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -228,9 +227,4 @@ default  CONFIG_CONSOLE_BTEXT=0
 
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/digitallogic/adl855pc/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -113,11 +112,4 @@ default CONFIG_ROM_PAYLOAD     = 1
 default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
 default HOSTCC="gcc"
 
-
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/digitallogic/msm586seg/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -121,11 +120,4 @@ default CONFIG_ROM_PAYLOAD     = 1
 default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
 default HOSTCC="gcc"
 
-
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/digitallogic/msm586seg/mainboard.c

@@ -35,9 +35,6 @@ static void irqdump()
    - set ADDDECTL (now done in raminit.c in cpu/amd/sc520
 */
 static void enable_dev(struct device *dev) {
-#if !CONFIG_CBFS
-	extern unsigned char *rom_start, *rom_end;
-#endif
 	volatile struct mmcrpic *pic = MMCRPIC;
 	volatile struct mmcr *mmcr = MMCRDEFAULT;
 
@@ -135,15 +132,6 @@ static void enable_dev(struct device *dev) {
 	 */
 	/* follow fuctory here */
 	mmcr->dmacontrol.extchanmapa = 0x3210;
-
-#if !CONFIG_CBFS
-	/* hack for IDIOTIC need to fix rom_start */
-	printk_err("Patching rom_start due to sc520 limits\n");
-	rom_start = 0x2000000 + 0x40000;
-	rom_end = rom_start + CONFIG_PAYLOAD_SIZE - 1;
-#endif
-
-	
 }
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("DIGITAL-LOGIC MSM586SEG Mainboard")

src/mainboard/digitallogic/msm800sev/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -180,10 +179,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/eaglelion/5bcm/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -164,10 +163,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
 default CONFIG_VIDEO_MB = 0
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/emulation/qemu-x86/Options.lb

@@ -48,13 +48,11 @@ uses CONFIG_USE_PRINTK_IN_CAR
 
 uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
 uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CBFS
 
 
 default CONFIG_CONSOLE_SERIAL8250=1
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
-default CONFIG_CBFS=1
 
 ## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
 default CONFIG_ROM_SIZE  = 256*1024

src/mainboard/gigabyte/ga-6bxc/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/gigabyte/ga_2761gxdk/Options.lb

@@ -22,7 +22,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -351,9 +350,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/gigabyte/m57sli/Options.lb

@@ -20,7 +20,6 @@
 ## 
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -359,10 +358,5 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 ## Select power on after power fail setting
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 ### End Options.lb
 end

src/mainboard/hp/dl145_g3/Options.lb

@@ -84,7 +84,6 @@ uses CONFIG_PCI_ROM_RUN
 uses CONFIG_HW_MEM_HOLE_SIZEK
 uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
 uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-uses CONFIG_CBFS
 
 uses CONFIG_HT_CHAIN_UNITID_BASE
 uses CONFIG_HT_CHAIN_END_UNITID_BASE
@@ -327,9 +326,5 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 ## Select power on after power fail setting
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
-##
-## CBFS
-default CONFIG_CBFS=1
-
 ### End Options.lb
 end

src/mainboard/ibm/e325/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -221,9 +220,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/ibm/e326/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -227,9 +226,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/iei/juki-511p/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -145,10 +144,4 @@ default HOSTCC="gcc"
 
 default CONFIG_VIDEO_MB = 0
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/iei/nova4899r/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -172,10 +171,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
 default CONFIG_VIDEO_MB = 0
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/iei/pcisa-lx-800-r10/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -106,10 +105,4 @@ default CONFIG_TTYS0_LCS = 0x3
 default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/intel/eagleheights/Options.lb

@@ -70,7 +70,6 @@ uses CONFIG_HAVE_SMI_HANDLER
 uses CONFIG_PCIE_CONFIGSPACE_HOLE
 uses CONFIG_MMCONF_SUPPORT
 uses CONFIG_MMCONF_BASE_ADDRESS
-uses CONFIG_CBFS
 #
 uses CONFIG_MAINBOARD
 uses CONFIG_MAINBOARD_PART_NUMBER
@@ -322,10 +321,5 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
 ## Select power on after power fail setting
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
-#
-# CBFS
-#
-default CONFIG_CBFS=1
-
 ### End Options.lb
 end

src/mainboard/intel/jarrell/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -242,9 +241,4 @@ default  CONFIG_CONSOLE_BTEXT=0
 
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/intel/mtarvon/Options.lb

@@ -18,7 +18,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -225,9 +224,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/intel/truxton/Options.lb

@@ -18,7 +18,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -236,10 +235,4 @@ default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/intel/xe7501devkit/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
 uses CONFIG_HAVE_PIRQ_TABLE
@@ -240,9 +239,4 @@ default CONFIG_DEBUG=1
 # default CONFIG_CPU_OPT="-g"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/iwill/dk8_htx/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -326,9 +325,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/iwill/dk8s2/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -228,9 +227,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/iwill/dk8x/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -227,9 +226,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/jetway/j7f24/Options.lb

@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -104,10 +103,4 @@ default HOSTCC = "gcc"
 ##
 default CONFIG_MAX_PCI_BUSES = 3
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/kontron/986lcd-m/Options.lb

@@ -71,7 +71,6 @@ uses CONFIG_PCIE_CONFIGSPACE_HOLE
 uses CONFIG_MMCONF_SUPPORT
 uses CONFIG_MMCONF_BASE_ADDRESS
 uses CONFIG_GFXUMA
-uses CONFIG_CBFS
 
 #
 uses CONFIG_MAINBOARD
@@ -327,10 +326,5 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
 ## Select power on after power fail setting
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
-#
-# CBFS
-# 
-default CONFIG_CBFS=1
-
 ### End Options.lb
 end

src/mainboard/lippert/frontrunner/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -159,10 +158,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/lippert/roadrunner-lx/Options.lb

@@ -21,7 +21,6 @@
 ## Based on Options.lb from AMD's DB800 mainboard.
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -29,11 +28,6 @@ uses CONFIG_HAVE_HARD_RESET
 uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_USE_OPTION_TABLE
 uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IDE
-uses CONFIG_FS_PAYLOAD
-uses CONFIG_FS_EXT2
-uses CONFIG_AUTOBOOT_DELAY
-uses CONFIG_AUTOBOOT_CMDLINE
 uses CONFIG_IRQ_SLOT_COUNT
 uses CONFIG_MAINBOARD
 uses CONFIG_MAINBOARD_VENDOR
@@ -211,9 +205,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/lippert/spacerunner-lx/Options.lb

@@ -21,7 +21,6 @@
 ## Based on Options.lb from AMD's DB800 mainboard.
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -29,11 +28,6 @@ uses CONFIG_HAVE_HARD_RESET
 uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_USE_OPTION_TABLE
 uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IDE
-uses CONFIG_FS_PAYLOAD
-uses CONFIG_FS_EXT2
-uses CONFIG_AUTOBOOT_DELAY
-uses CONFIG_AUTOBOOT_CMDLINE
 uses CONFIG_IRQ_SLOT_COUNT
 uses CONFIG_MAINBOARD
 uses CONFIG_MAINBOARD_VENDOR
@@ -211,9 +205,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/mitac/6513wu/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CC
-uses CONFIG_CBFS
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_CONSOLE_SERIAL8250
 uses CONFIG_CONSOLE_VGA
@@ -78,7 +77,6 @@ default CONFIG_ROM_IMAGE_SIZE = 128 * 1024
 default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
 default CONFIG_HAVE_FALLBACK_BOOT = 1
 default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CBFS=1
 
 # RAM layout
 default CONFIG_RAMBASE = 0x00004000

src/mainboard/msi/ms6119/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/msi/ms6147/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,9 +96,4 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/msi/ms6178/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -97,7 +96,6 @@ default CONFIG_UDELAY_TSC = 1
 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_CBFS = 1
 default CONFIG_HAVE_HIGH_TABLES = 1
 default CONFIG_VIDEO_MB = 1
 end

src/mainboard/msi/ms7135/Options.lb

@@ -21,7 +21,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_USE_FAILOVER_IMAGE
@@ -320,9 +319,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/msi/ms7260/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_USE_FAILOVER_IMAGE
@@ -186,9 +185,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/msi/ms9185/Options.lb

@@ -23,7 +23,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -327,9 +326,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/msi/ms9282/Options.lb

@@ -23,7 +23,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -307,9 +306,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/nec/powermate2000/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -96,9 +95,4 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
 
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/newisys/khepri/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -243,9 +242,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/nvidia/l1_2pvv/Options.lb

@@ -20,7 +20,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -349,9 +348,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/olpc/btest/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -160,10 +159,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/olpc/rev_a/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -160,10 +159,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/pcengines/alix1c/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -198,10 +197,4 @@ default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 ## At a maximum only compile in this level of debugging
 default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 
-
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/rca/rm4100/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CC
-uses CONFIG_CBFS
 uses CONFIG_CONSOLE_SERIAL8250
 uses CONFIG_CONSOLE_VGA
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
@@ -96,9 +95,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAINBOARD_VENDOR = "RCA"
 default CONFIG_MAINBOARD_PART_NUMBER = "RM4100"
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/soyo/sy-6ba-plus-iii/Options.lb

@@ -19,7 +19,6 @@
 ##
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -96,5 +95,4 @@ default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
 default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
 default CONFIG_CONSOLE_VGA = 1
 default CONFIG_PCI_ROM_RUN = 1
-default CONFIG_CBFS=1
 end

src/mainboard/sunw/ultra40/Options.lb

@@ -1,5 +1,4 @@
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -276,9 +275,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end

src/mainboard/supermicro/h8dme/Options.lb

@@ -20,7 +20,6 @@
 ## 
 
 uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_CBFS
 uses CONFIG_HAVE_PIRQ_TABLE
 uses CONFIG_HAVE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
@@ -351,9 +350,4 @@ default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
 default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
 
 ### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
 end