remove duplicated code
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1456 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
@ -37,131 +37,6 @@
|
||||
#define RESET 0xFF
|
||||
#define READ_ID 0x90
|
||||
|
||||
static int erase_sector_49lf040 (volatile char * bios, unsigned int page)
|
||||
{
|
||||
/* Chip erase function does not exist for LPC mode on 49lf040.
|
||||
* Erase sector-by-sector instead. */
|
||||
volatile unsigned char *Temp;
|
||||
|
||||
/* Issue the Sector Erase command to 40LF040 */
|
||||
Temp = bios + 0x5555; /* set up address to be C000:5555h */
|
||||
*Temp = 0xAA; /* write data 0xAA to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */
|
||||
*Temp = 0x55; /* write data 0x55 to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + 0x5555; /* set up address to be C000:5555h */
|
||||
*Temp = 0x80; /* write data 0x80 to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + 0x5555; /* set up address to be C000:5555h */
|
||||
*Temp = 0xAA; /* write data 0xAA to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */
|
||||
*Temp = 0x55; /* write data 0x55 to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + page; /* set up address to be the current sector */
|
||||
*Temp = 0x30; /* write data 0x30 to the address */
|
||||
|
||||
/* wait for Toggle bit ready */
|
||||
toggle_ready_jedec(bios);
|
||||
|
||||
return(0);
|
||||
}
|
||||
|
||||
static __inline__ int write_sector_49lf040(volatile char * bios,
|
||||
unsigned char * src,
|
||||
volatile unsigned char * dst,
|
||||
unsigned int page_size)
|
||||
{
|
||||
int i;
|
||||
volatile char *Temp;
|
||||
|
||||
for (i = 0; i < page_size; i++) {
|
||||
if (*dst != 0xff) {
|
||||
printf("FATAL: dst %p not erased (val 0x%x)\n", dst, *dst);
|
||||
return(-1);
|
||||
}
|
||||
/* transfer data from source to destination */
|
||||
if (*src == 0xFF) {
|
||||
dst++, src++;
|
||||
/* If the data is 0xFF, don't program it */
|
||||
continue;
|
||||
}
|
||||
Temp = (bios + 0x5555);
|
||||
*Temp = 0xAA;
|
||||
Temp = bios + 0x2AAA;
|
||||
*Temp = 0x55;
|
||||
Temp = bios + 0x5555;
|
||||
*Temp = 0xA0;
|
||||
*dst = *src;
|
||||
toggle_ready_jedec(bios);
|
||||
if (*dst != *src)
|
||||
printf("BAD! dst 0x%lx val 0x%x src 0x%x\n",
|
||||
(unsigned long)dst, *dst, *src);
|
||||
dst++, src++;
|
||||
}
|
||||
|
||||
return(0);
|
||||
}
|
||||
|
||||
int probe_49lf040 (struct flashchip * flash)
|
||||
{
|
||||
volatile char * bios = flash->virt_addr;
|
||||
unsigned char id1, id2;
|
||||
|
||||
*(volatile char *) (bios + 0x5555) = 0xAA;
|
||||
myusec_delay(10);
|
||||
*(volatile char *) (bios + 0x2AAA) = 0x55;
|
||||
myusec_delay(10);
|
||||
*(volatile char *) (bios + 0x5555) = 0x90;
|
||||
myusec_delay(10);
|
||||
|
||||
id1 = *(volatile unsigned char *) bios;
|
||||
id2 = *(volatile unsigned char *) (bios + 0x01);
|
||||
|
||||
*(volatile char *) (bios + 0x5555) = 0xAA;
|
||||
*(volatile char *) (bios + 0x2AAA) = 0x55;
|
||||
*(volatile char *) (bios + 0x5555) = 0xF0;
|
||||
|
||||
myusec_delay(10);
|
||||
|
||||
printf("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2);
|
||||
|
||||
if (id1 == flash->manufacture_id && id2 == flash->model_id)
|
||||
return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Chip erase only works in parallel programming mode for the 49lf040.
|
||||
* Use sector-erase instead */
|
||||
int erase_49lf040 (struct flashchip * flash)
|
||||
{
|
||||
volatile unsigned char * bios = flash->virt_addr;
|
||||
volatile unsigned char *Temp;
|
||||
|
||||
/* Issue the Sector Erase command to 40LF040 */
|
||||
Temp = bios + 0x5555; /* set up address to be C000:5555h */
|
||||
*Temp = 0xAA; /* write data 0xAA to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */
|
||||
*Temp = 0x55; /* write data 0x55 to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + 0x5555; /* set up address to be C000:5555h */
|
||||
*Temp = 0x80; /* write data 0x80 to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + 0x5555; /* set up address to be C000:5555h */
|
||||
*Temp = 0xAA; /* write data 0xAA to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */
|
||||
*Temp = 0x55; /* write data 0x55 to the address */
|
||||
myusec_delay(10);
|
||||
Temp = bios + 0x5555; /* set up address to be C000:5555h */
|
||||
*Temp = 0x10; /* write data 0x55 to the address */
|
||||
myusec_delay(50000);
|
||||
|
||||
return(0);
|
||||
}
|
||||
|
||||
int write_49lf040 (struct flashchip * flash, unsigned char * buf)
|
||||
{
|
||||
@ -171,13 +46,15 @@ int write_49lf040 (struct flashchip * flash, unsigned char * buf)
|
||||
|
||||
printf ("Programming Page: ");
|
||||
for (i = 0; i < total_size/page_size; i++) {
|
||||
/* erase the page before programming */
|
||||
erase_sector_49lf040(bios, i * page_size);
|
||||
/* erase the page before programming
|
||||
* Chip erase only works in parallel programming mode for the 49lf040.
|
||||
* Use sector-erase instead */
|
||||
erase_sector_jedec(bios, i * page_size);
|
||||
|
||||
/* write to the sector */
|
||||
printf ("%04d at address: 0x%08x ", i, i * page_size);
|
||||
write_sector_49lf040(bios, buf + i * page_size, bios + i * page_size,
|
||||
page_size);
|
||||
write_sector_jedec(bios, buf + i * page_size, bios + i * page_size,
|
||||
page_size);
|
||||
printf ("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
|
||||
fflush(stdout);
|
||||
}
|
||||
|
Reference in New Issue
Block a user