sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Drop support for the --human-readable option. It's not any more useful than

Browse Source 
the --dump option, it just means lots of additional work for no gain, IMO.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2872 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann
2007-10-17 23:43:59 +00:00
parent d937b5243c
commit 7dabe5ea0d
10 changed files with 5 additions and 139 deletions
Download Patch File Download Diff File Expand all files Collapse all files

63
util/superiotool/fintek.c
View File

@@ -70,68 +70,6 @@ const static struct superio_registers reg_table[] = {
{EOT}
};
static void dump_readable_fintek(uint16_t port, uint16_t did)
{
if (!dump_readable)
return;
printf("Human-readable register dump:\n");
printf("Flash write is %s.\n",
regval(port, 0x28) & 0x80 ? "enabled" : "disabled");
printf("Flash control is 0x%04x.\n", regval(port, 0x28));
printf("27=%02x\n", regval(port, 0x27));
printf("29=%02x\n", regval(port, 0x29));
printf("2a=%02x\n", regval(port, 0x2a));
printf("2b=%02x\n", regval(port, 0x2b));
/* Select UART 1. */
regwrite(port, 0x07, 0x01);
printf("UART1 is %s\n",
regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf("UART1 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60),
regval(port, 0x61), regval(port, 0x70) & 0x0f,
regval(port, 0xf0) & 0x10 ? "RS485" : "RS232");
/* Select UART 2. */
regwrite(port, 0x07, 0x02);
printf("UART2 is %s\n",
regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf("UART2 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60),
regval(port, 0x61), regval(port, 0x70) & 0x0f,
regval(port, 0xf0) & 0x10 ? "RS485" : "RS232");
/* Select parallel port. */
regwrite(port, 0x07, 0x03);
printf("PARPORT is %s\n",
regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf("PARPORT base=%02x%02x, irq=%02x\n", regval(port, 0x60),
regval(port, 0x61), regval(port, 0x70) & 0x0f);
/* Select HW monitor. */
regwrite(port, 0x07, 0x04);
printf("HW monitor is %s\n",
regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf("HW monitor base=%02x%02x, irq=%02x\n", regval(port, 0x60),
regval(port, 0x61), regval(port, 0x70) & 0x0f);
/* Select GPIO. */
regwrite(port, 0x07, 0x05);
printf("GPIO is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled");
printf
("GPIO 70=%02x, e0=%02x, e1=%02x, e2=%02x, e3=%02x, e4=%02x, e5=%02x\n",
regval(port, 0x70), regval(port, 0xe0), regval(port, 0xe1),
regval(port, 0xe2), regval(port, 0xe3), regval(port, 0xe4),
regval(port, 0xe5));
printf
("GPIO e6=%02x, e7=%02x, e8=%02x, e9=%02x, f0=%02x, f1=%02x, f3=%02x, f4=%02x\n",
regval(port, 0xe6), regval(port, 0xe7), regval(port, 0xe8),
regval(port, 0xe9), regval(port, 0xf0), regval(port, 0xf1),
regval(port, 0xf3), regval(port, 0xf4));
printf("GPIO f5=%02x, f6=%02x, f7=%02x, f8=%02x\n", regval(port, 0xf5),
regval(port, 0xf6), regval(port, 0xf7), regval(port, 0xf8));
}
void probe_idregs_fintek(uint16_t port)
{
uint16_t vid, did;
@@ -158,7 +96,6 @@ void probe_idregs_fintek(uint16_t port)
chip_found = 1;
dump_superio("Fintek", reg_table, port, did);
dump_readable_fintek(port, did);
exit_conf_mode_winbond_fintek_ite_8787(port);
}