Change all vx800 file names from CamelCase to camel_case to match

our coding guidelines (trivial).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4314 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/northbridge/via/vx800/ddr2init/dram_init.h

@@ -197,59 +197,59 @@ typedef struct _DRAM_SIZE_INFO {
 //detection.c
 /*Step1 detect DRAM type, Read SPD data,command rate*/
 CB_STATUS DRAMDetect(DRAM_SYS_ATTR * DramAttr);
-//FreqSetting.c
+//freq_setting.c
 /*Step2 set Frequency, calculate CAL*/
 void DRAMFreqSetting(DRAM_SYS_ATTR * DramAttr);
-//TimingSetting.c
+//timing_setting.c
 /*Step3 Set DRAM	Timing*/
 void DRAMTimingSetting(DRAM_SYS_ATTR * DramAttr);
-//DRDY_BL.c
+//drdy_bl.c
 /*Step4 DRDY*/
 void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr);
-//DRDY_BL.c
+//drdy_bl.c
 /*Step5 Burst Length*/
 void DRAMBurstLength(DRAM_SYS_ATTR * DramAttr);
-//DrivingSetting.c
+//driving_setting.c
 /*Step6 DRAM Driving Adjustment*/
 void DRAMDriving(DRAM_SYS_ATTR * DramAttr);
 
-//ClkCtrl.c
+//clk_ctrl.c
 /*Step7 duty cycle control*/
 void DutyCycleCtrl(DRAM_SYS_ATTR * DramAttr);
-//ClkCtrl.c
+//clk_ctrl.c
 /*Step8 DRAM clock phase and delay control*/
 void DRAMClkCtrl(DRAM_SYS_ATTR * DramAttr);
 
-//DevInit.c
+//dev_init.c
 /*Step9 set register before init DRAM device*/
 void DRAMRegInitValue(DRAM_SYS_ATTR * DramAttr);
 
-//DevInit.c
+//dev_init.c
 /*Step10 DDR and DDR2 initialize process*/
 void DRAMInitializeProc(DRAM_SYS_ATTR * DramAttr);
 
-//DQSSearch.c
+//dqs_search.c
 /*Step11 Search DQS and DQ output delay*/
 void DRAMDQSOutputSearch(DRAM_SYS_ATTR * DramAttr);
 
-//DQSSearch.c
+//dqs_search.c
 /*Step12 Search DQS  input delay*/
 void DRAMDQSInputSearch(DRAM_SYS_ATTR * DramAttr);
 
-//RankMap.c
+//rank_map.c
 /*Step13 Interleav function in rankmap.c*/
 void DRAMBankInterleave(DRAM_SYS_ATTR * DramAttr);
 
-//RankMap.c
+//rank_map.c
 /*Step14 Sizing*/
 void DRAMSizingMATypeM(DRAM_SYS_ATTR * DramAttr);
 
 
-//FinalSetting.c
+//final_setting.c
 /*Step15 DDR fresh counter setting*/
 void DRAMRefreshCounter(DRAM_SYS_ATTR * DramAttr);
 
-//FinnalSetting.c
+//final_setting.c
 /*Step16 Final register setting for improve performance*/
 void DRAMRegFinalValue(DRAM_SYS_ATTR * DramAttr);
 

src/northbridge/via/vx800/ddr2init/vx800/dev_init.c

@@ -396,7 +396,7 @@ void InitDDR2CHA(DRAM_SYS_ATTR * DramAttr)
 
 
 	// Step 9,10. check ODT value for EMRS(1) command
-	// according to  ODTLookUp_TBL in DrivingSetting.c if there is one dimm in MB's one channel , the DDR2's ODT is 150ohm
+	// according to  ODTLookUp_TBL in driving_setting.c if there is one dimm in MB's one channel , the DDR2's ODT is 150ohm
 	// if there is two dimm in MB's one channel, the DDR2's ODT is 75 ohm
 	DimmNum = DramAttr->DimmNumChA;
 

src/northbridge/via/vx800/examples/cache_as_ram_auto.c

@@ -43,7 +43,7 @@
 #endif
 #include "cpu/x86/lapic/boot_cpu.c"
 
-#include "DrivingClkPhaseData.c"
+#include "driving_clk_phase_data.c"
 
 #include "northbridge/via/vx800/raminit.h"
 #include "northbridge/via/vx800/raminit.c"
@@ -423,7 +423,7 @@ g)      Rx73h = 32h
 
 		DRAMDRDYSetting(&DramAttr);
 
-		Data = 0x80;	// this value is same with DevInit.c
+		Data = 0x80;	// this value is same with dev_init.c
 		pci_write_config8(PCI_DEV(0, 0, 4), 0xa3, Data);
 		pci_write_config8(PCI_DEV(0, 17, 7), 0x60, rambits << 2);
 		Data = pci_read_config8(MEMCTRL, 0x88);

src/northbridge/via/vx800/examples/driving_clk_phase_data.c

@@ -18,7 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
- #include "northbridge/via/vx800/DrivingClkPhaseData.h"
+ #include "northbridge/via/vx800/driving_clk_phase_data.h"
 
 // DQS	Driving  
 //Reg0xE0, 0xE1

src/northbridge/via/vx800/northbridge.c

@@ -38,7 +38,7 @@
 static void memctrl_init(device_t dev)
 {
 /*
-  set VGA in UMARamSetting.c, not in this function.
+  set VGA in uma_ram_setting.c, not in this function.
 */
 #if 0
 	pci_write_config8(dev, 0x85, 0x20);

src/northbridge/via/vx800/raminit.c

@@ -38,24 +38,24 @@
 #define PRINT_DEBUG_MEM_HEX32(x)
 #define DUMPNORTH()
 #endif
-#include "northbridge/via/vx800/ddr2init/Translatorddr2init.c"
+#include "northbridge/via/vx800/ddr2init/translator_ddr2_init.c"
-#include "northbridge/via/vx800/ddr2init/DramInit.h"
+#include "northbridge/via/vx800/ddr2init/dram_init.h"
 #include "northbridge/via/vx800/vx800_early_smbus.c"
 #include "northbridge/via/vx800/vx800_early_serial.c"
-#include "northbridge/via/vx800/ddr2init/DramUtil.h"
+#include "northbridge/via/vx800/ddr2init/dram_util.h"
-#include "northbridge/via/vx800/ddr2init/DramUtil.c"
+#include "northbridge/via/vx800/ddr2init/dram_util.c"
-#include "northbridge/via/vx800/ddr2init/vx800/Detection.c"
+#include "northbridge/via/vx800/ddr2init/vx800/detection.c"
-#include "northbridge/via/vx800/ddr2init/vx800/FreqSetting.c"
+#include "northbridge/via/vx800/ddr2init/vx800/freq_setting.c"
-#include "northbridge/via/vx800/ddr2init/vx800/TimingSetting.c"
+#include "northbridge/via/vx800/ddr2init/vx800/timing_setting.c"
-#include "northbridge/via/vx800/ddr2init/vx800/DRDY_BL.c"
+#include "northbridge/via/vx800/ddr2init/vx800/drdy_bl.c"
-#include "northbridge/via/vx800/ddr2init/vx800/DrivingSetting.c"
+#include "northbridge/via/vx800/ddr2init/vx800/driving_setting.c"
-#include "northbridge/via/vx800/ddr2init/vx800/ClkCtrl.c"
+#include "northbridge/via/vx800/ddr2init/vx800/clk_ctrl.c"
-#include "northbridge/via/vx800/ddr2init/vx800/DevInit.c"
+#include "northbridge/via/vx800/ddr2init/vx800/dev_init.c"
-#include "northbridge/via/vx800/ddr2init/vx800/RankMap.c"
+#include "northbridge/via/vx800/ddr2init/vx800/rank_map.c"
-#include "northbridge/via/vx800/ddr2init/vx800/DQSSearch.c"
+#include "northbridge/via/vx800/ddr2init/vx800/dqs_search.c"
-#include "northbridge/via/vx800/ddr2init/vx800/FinalSetting.c"
+#include "northbridge/via/vx800/ddr2init/vx800/final_setting.c"
-#include "northbridge/via/vx800/ddr2init/vx800/UMARamSetting.c"
+#include "northbridge/via/vx800/ddr2init/vx800/uma_ram_setting.c"
-#include "northbridge/via/vx800/ddr2init/DramInit.c"
+#include "northbridge/via/vx800/ddr2init/dram_init.c"
 /*
  * Support one dimm with up to 2 ranks
  */