soc/intel/quark: Enable Serial Port

Add the code to enable debug serial output using HSUART1:

*  Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1
*  Note that the BIST value is always zero as validated in
   esram_init.inc
*  The initial TSC value is currently not saved!

Testing on Galileo:
*  Edit the src/mainboard/intel/galileo/Makefile.inc file
   *  Add "select ADD_FSP_PDAT_FILE"
   *  Add "select ADD_FSP_RAW_BIN"
   *  Add "select ADD_RMU_FILE"
*  Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
*  Place the pdat.bin files in the location specified by
   CONFIG_FSP_PDAT_FILE
*  Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
*  Testing is successful if serial output is present on HSUART1 at
   115200 baud, 8-bit, no parity

Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13445
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>

src/soc/intel/quark/uart.c

@@ -0,0 +1,40 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2003 Eric Biederman
+ * Copyright (C) 2006-2010 coresystems GmbH
+ * Copyright (C) 2015-2016 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+// Use simple device model for this file even in ramstage
+#define __SIMPLE_DEVICE__
+
+#include <console/uart.h>
+#include <device/pci.h>
+#include <device/pci_def.h>
+#include <rules.h>
+#include <soc/pci_devs.h>
+
+unsigned int uart_platform_refclk(void)
+{
+	return 44236800;
+}
+
+uintptr_t uart_platform_base(int idx)
+{
+	/* HSUART controller #1 (B0:D20:F5). */
+	device_t dev = PCI_DEV(0, HSUART1_DEV, HSUART1_FUNC);
+
+	/* UART base address at BAR0(offset 0x10). */
+	return (unsigned int) (pci_read_config32(dev,
+		PCI_BASE_ADDRESS_0) & ~0xfff);
+}