sb/intel/i82801bx: Get rid of device_t

Use of device_t has been abandoned in ramstage.

Change-Id: I661b2435d9f0306b246a3e89aac24eb30c959085
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This commit is contained in:
Elyes HAOUAS
2018-05-13 13:30:59 +02:00
committed by Patrick Georgi
parent 152f1c918f
commit 892e9f6030
5 changed files with 10 additions and 10 deletions

View File

@ -21,10 +21,10 @@
#include <device/pci.h> #include <device/pci.h>
#include "i82801bx.h" #include "i82801bx.h"
void i82801bx_enable(device_t dev) void i82801bx_enable(struct device *dev)
{ {
u16 reg16, index; u16 reg16, index;
device_t lpc_dev; struct device *lpc_dev;
/* Search for the 82801BA/BAM LPC device (D31:F0) on PCI bus 0. */ /* Search for the 82801BA/BAM LPC device (D31:F0) on PCI bus 0. */
lpc_dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); lpc_dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0));

View File

@ -19,7 +19,7 @@
#if !defined(__PRE_RAM__) #if !defined(__PRE_RAM__)
#include "chip.h" #include "chip.h"
extern void i82801bx_enable(device_t dev); extern void i82801bx_enable(struct device *dev);
#endif #endif
#if defined(__PRE_RAM__) #if defined(__PRE_RAM__)

View File

@ -119,7 +119,7 @@ static void i82801bx_enable_serial_irqs(struct device *dev)
/* TODO: Explain/#define the real meaning of these magic numbers. */ /* TODO: Explain/#define the real meaning of these magic numbers. */
} }
static void i82801bx_pirq_init(device_t dev, uint16_t ich_model) static void i82801bx_pirq_init(struct device *dev, uint16_t ich_model)
{ {
u8 reg8; u8 reg8;
config_t *config = dev->chip_info; config_t *config = dev->chip_info;
@ -150,7 +150,7 @@ static void i82801bx_pirq_init(device_t dev, uint16_t ich_model)
pci_write_config8(dev, PIRQH_ROUT, reg8); pci_write_config8(dev, PIRQH_ROUT, reg8);
} }
static void i82801bx_power_options(device_t dev) static void i82801bx_power_options(struct device *dev)
{ {
uint8_t byte; uint8_t byte;
int pwr_on = -1; int pwr_on = -1;
@ -180,7 +180,7 @@ static void i82801bx_power_options(device_t dev)
} }
} }
static void gpio_init(device_t dev) static void gpio_init(struct device *dev)
{ {
/* Set the value for GPIO base address register and enable GPIO. */ /* Set the value for GPIO base address register and enable GPIO. */
pci_write_config32(dev, GPIO_BASE, (GPIO_BASE_ADDR | 1)); pci_write_config32(dev, GPIO_BASE, (GPIO_BASE_ADDR | 1));
@ -222,7 +222,7 @@ static void i82801bx_lpc_route_dma(struct device *dev, uint8_t mask)
pci_write_config16(dev, PCI_DMA_CFG, reg16); pci_write_config16(dev, PCI_DMA_CFG, reg16);
} }
static void i82801bx_lpc_decode_en(device_t dev, uint16_t ich_model) static void i82801bx_lpc_decode_en(struct device *dev, uint16_t ich_model)
{ {
/* Decode 0x3F8-0x3FF (COM1) for COMA port, 0x2F8-0x2FF (COM2) for COMB. /* Decode 0x3F8-0x3FF (COM1) for COMA port, 0x2F8-0x2FF (COM2) for COMB.
* LPT decode defaults to 0x378-0x37F and 0x778-0x77F. * LPT decode defaults to 0x378-0x37F and 0x778-0x77F.
@ -269,7 +269,7 @@ static void lpc_init(struct device *dev)
i82801bx_lpc_decode_en(dev, ich_model); i82801bx_lpc_decode_en(dev, ich_model);
} }
static void i82801bx_lpc_read_resources(device_t dev) static void i82801bx_lpc_read_resources(struct device *dev)
{ {
struct resource *res; struct resource *res;

View File

@ -22,7 +22,7 @@
#include <southbridge/intel/common/smbus.h> #include <southbridge/intel/common/smbus.h>
#include "i82801bx.h" #include "i82801bx.h"
static int lsmbus_read_byte(device_t dev, u8 address) static int lsmbus_read_byte(struct device *dev, u8 address)
{ {
u16 device; u16 device;
struct resource *res; struct resource *res;

View File

@ -24,7 +24,7 @@
void watchdog_off(void) void watchdog_off(void)
{ {
device_t dev; struct device *dev;
unsigned long value, base; unsigned long value, base;
/* Turn off the ICH5 watchdog. */ /* Turn off the ICH5 watchdog. */