tree: Drop repeated words

Found-by: linter
Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/Kconfig

@@ -562,7 +562,7 @@ config CBFS_SIZE
 	# Default value set at the end of the file
 	help
 	  This is the part of the ROM actually managed by CBFS, located at the
-	  end of the ROM (passed through cbfstool -o) on x86 and at at the start
+	  end of the ROM (passed through cbfstool -o) on x86 and at the start
 	  of the ROM (passed through cbfstool -s) everywhere else. It defaults
 	  to span the whole ROM on all but Intel systems that use an Intel Firmware
 	  Descriptor.  It can be overridden to make coreboot live alongside other

src/arch/arm/include/armv7/arch/cache.h

@@ -192,7 +192,7 @@ static inline uint32_t read_clidr(void)
 	return val;
 }
 
-/* read cache size ID register register (CCSIDR) */
+/* read cache size ID register (CCSIDR) */
 static inline uint32_t read_ccsidr(void)
 {
 	uint32_t val = 0;

src/cpu/x86/Kconfig

@@ -179,7 +179,7 @@ config X86_INIT_NEED_1_SIPI
 	bool
 	default n
 	help
-	  This option limits the number of SIPI signals sent during during the
+	  This option limits the number of SIPI signals sent during the
 	  common AP setup.  Intel documentation specifies an INIT SIPI SIPI
 	  sequence, however this doesn't work on some AMD and Intel platforms.
 	  These newer AMD and Intel platforms don't need the 10ms wait between
@@ -197,7 +197,7 @@ config RESERVE_MTRRS_FOR_OS
 	default n
 	help
 	  This option allows a platform to reserve 2 MTRRs for the OS usage.
-	  The Intel SDM documents that the the first 6 MTRRs are intended for
+	  The Intel SDM documents that the first 6 MTRRs are intended for
 	  the system BIOS and the last 2 are to be reserved for OS usage.
 	  However, modern OSes use PAT to control cacheability instead of
 	  using MTRRs.

src/include/device_tree.h

@@ -91,10 +91,10 @@ struct device_tree
  * which were consumed reading the requested value.
  */
 
-/* Read the property, if any, at offset offset. */
+/* Read the property at offset, if any exists. */
 int fdt_next_property(const void *blob, uint32_t offset,
 		      struct fdt_property *prop);
-/* Read the name of the node, if any, at offset offset. */
+/* Read the name of the node at offset, if any exists. */
 int fdt_node_name(const void *blob, uint32_t offset, const char **name);
 
 void fdt_print_node(const void *blob, uint32_t offset);

src/mainboard/apple/macbookair4_2/devicetree.cb

@@ -40,7 +40,7 @@ chip northbridge/intel/sandybridge
 			device ref ehci2 on # USB2 EHCI #2 Unsupported PCI device 8086:1c2c
 				subsystemid 0x8086 0x7270
 			end
-			device ref hda on # High Definition Audio Audio controller
+			device ref hda on # High Definition Audio controller
 				subsystemid 0x8086 0x7270
 			end
 			device ref pcie_rp1 on # PCIe Port #1

src/mainboard/asrock/b75pro3-m/devicetree.cb

@@ -57,7 +57,7 @@ chip northbridge/intel/sandybridge
 			device ref ehci2 on # USB2 EHCI #2
 				subsystemid 0x1849 0x1e2d
 			end
-			device ref hda on # High Definition Audio Audio controller
+			device ref hda on # High Definition Audio controller
 				subsystemid 0x1849 0x8892
 			end
 			device ref pcie_rp1 on # PCIe Port #1

src/mainboard/asus/h61-series/variants/h61m-cs/overridetree.cb

@@ -5,7 +5,7 @@ chip northbridge/intel/sandybridge
 		subsystemid 0x1043 0x844d inherit
 		chip southbridge/intel/bd82x6x
 			register "gen1_dec" = "0x000c0291"
-			device pci 1b.0 on      # High Definition Audio Audio controller
+			device pci 1b.0 on      # High Definition Audio controller
 				subsystemid 0x1043 0x8445
 			end
 			device pci 1c.0 off end # PCIe Port #1

src/mainboard/emulation/qemu-q35/bootblock.c

@@ -11,7 +11,7 @@ static void bootblock_northbridge_init(void)
 {
 	/*
 	 * The "io" variant of the config access is explicitly used to
-	 * setup the PCIEXBAR because CONFIG(ECAM_MMCONF_SUPPORT) is set to
+	 * setup the PCIEXBAR because CONFIG(ECAM_MMCONF_SUPPORT) is set
 	 * to true. That way all subsequent non-explicit config accesses use
 	 * MCFG. This code also assumes that bootblock_northbridge_init() is
 	 * the first thing called in the non-asm boot block code. The final

src/mainboard/google/dedede/smihandler.c

@@ -80,7 +80,7 @@ static void mainboard_config_cbi_wp(void)
 	}
 
 	/*
-	 * Note that we are assuming that the Status Register protect bits are
+	 * Note that we are assuming that the Status Register protect bits
 	 * are located at this index and that 1 means hardware protected.  This
 	 * should be the case for these boards.
 	 */

src/mainboard/google/fizz/variants/baseboard/devicetree.cb

@@ -168,7 +168,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[2]" = "1"
 	# RP 3, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[2]" = "1"
-	# RP 3 uses uses CLK SRC 0
+	# RP 3 uses CLK SRC 0
 	register "PcieRpClkSrcNumber[2]" = "0"
 
 	# Enable Root port 4(x1) for WLAN.
@@ -181,7 +181,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[3]" = "1"
 	# RP 4, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[3]" = "1"
-	# RP 4 uses uses CLK SRC 5
+	# RP 4 uses CLK SRC 5
 	register "PcieRpClkSrcNumber[3]" = "5"
 
 	# Enable Root port 5(x4) for NVMe.
@@ -207,7 +207,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[8]" = "1"
 	# RP 9, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[8]" = "1"
-	# RP 9 uses uses CLK SRC 2
+	# RP 9 uses CLK SRC 2
 	register "PcieRpClkSrcNumber[8]" = "2"
 
 	# Enable Root port 11 for BtoB.
@@ -220,7 +220,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[10]" = "1"
 	# RP 11, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[10]" = "1"
-	# RP 11 uses uses CLK SRC 2
+	# RP 11 uses CLK SRC 2
 	register "PcieRpClkSrcNumber[10]" = "2"
 
 	# Enable Root port 12 for BtoB.
@@ -233,7 +233,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[11]" = "1"
 	# RP 12, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[11]" = "1"
-	# RP 12 uses uses CLK SRC 2
+	# RP 12 uses CLK SRC 2
 	register "PcieRpClkSrcNumber[11]" = "2"
 
 	register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)"	# Type-C

src/mainboard/google/fizz/variants/endeavour/overridetree.cb

@@ -10,7 +10,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[6]" = "1"
 	# RP 7, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[6]" = "1"
-	# RP 7 uses uses CLK SRC 4
+	# RP 7 uses CLK SRC 4
 	register "PcieRpClkSrcNumber[6]" = "4"
 
 	# Enable Root port 8(x1) for TPU0
@@ -23,7 +23,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[7]" = "1"
 	# RP 8, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[7]" = "1"
-	# RP 8 uses uses CLK SRC 2
+	# RP 8 uses CLK SRC 2
 	register "PcieRpClkSrcNumber[7]" = "2"
 
 	# Enable Root port 9(x4) for i350 LAN
@@ -34,7 +34,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[8]" = "1"
 	# RP 9, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[8]" = "1"
-	# RP 9 uses uses CLK SRC 2
+	# RP 9 uses CLK SRC 2
 	register "PcieRpClkSrcNumber[8]" = "2"
 
 	# These are part of Root port 9(x4)

src/mainboard/google/poppy/variants/baseboard/devicetree.cb

@@ -130,7 +130,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[0]" = "1"
 	# RP 1, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[0]" = "1"
-	# RP 1 uses uses CLK SRC 1
+	# RP 1 uses CLK SRC 1
 	register "PcieRpClkSrcNumber[0]" = "1"
 
 	register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)"	# Type-C Port 1

src/mainboard/google/poppy/variants/nautilus/devicetree.cb

@@ -135,7 +135,7 @@ chip soc/intel/skylake
 	register "PcieRpClkReqSupport[0]" = "1"
 	# RP 1 uses SRCCLKREQ1#
 	register "PcieRpClkReqNumber[0]" = "1"
-	# RP 1 uses uses CLK SRC 1
+	# RP 1 uses CLK SRC 1
 	register "PcieRpClkSrcNumber[0]" = "1"
 	# RP 1, Enable Advanced Error Reporting
 	register "PcieRpAdvancedErrorReporting[0]" = "1"

src/mainboard/google/poppy/variants/rammus/devicetree.cb

@@ -133,7 +133,7 @@ chip soc/intel/skylake
 	register "PcieRpClkReqSupport[0]" = "1"
 	# RP 1 uses SRCCLKREQ1#
 	register "PcieRpClkReqNumber[0]" = "1"
-	# RP 1 uses uses CLK SRC 1
+	# RP 1 uses CLK SRC 1
 	register "PcieRpClkSrcNumber[0]" = "1"
 	# RP 1, Enable Advanced Error Reporting
 	register "PcieRpAdvancedErrorReporting[0]" = "1"

src/mainboard/google/poppy/variants/soraka/devicetree.cb

@@ -130,7 +130,7 @@ chip soc/intel/skylake
 	register "PcieRpAdvancedErrorReporting[0]" = "1"
 	# RP 1, Enable Latency Tolerance Reporting Mechanism
 	register "PcieRpLtrEnable[0]" = "1"
-	# RP 1 uses uses CLK SRC 1
+	# RP 1 uses CLK SRC 1
 	register "PcieRpClkSrcNumber[0]" = "1"
 
 	register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)"	# Type-C Port 1

src/mainboard/hp/compaq_8200_elite_sff/devicetree.cb

@@ -30,7 +30,7 @@ chip northbridge/intel/sandybridge
 			device ref me_kt on  end	# Management Engine KT
 			device ref gbe on  end	# Intel Gigabit Ethernet
 			device ref ehci2 on  end	# USB2 EHCI #2
-			device ref hda on  end	# High Definition Audio Audio controller
+			device ref hda on  end	# High Definition Audio controller
 			device ref pcie_rp1 on  end	# PCIe Port #1
 			device ref pcie_rp2 off end	# PCIe Port #2
 			device ref pcie_rp3 off end	# PCIe Port #3

src/mainboard/hp/z220_series/devicetree.cb

@@ -34,7 +34,7 @@ chip northbridge/intel/sandybridge
 			device ref me_kt on  end	# Management Engine KT
 			device ref gbe on  end	# Intel Gigabit Ethernet
 			device ref ehci2 on  end	# USB2 EHCI #2
-			device ref hda on  end	# High Definition Audio Audio controller
+			device ref hda on  end	# High Definition Audio controller
 			device ref pcie_rp1 on  end	# PCIe Port #1
 			device ref pcie_rp2 off end	# PCIe Port #2
 			device ref pcie_rp3 off end	# PCIe Port #3

src/mainboard/intel/kblrvp/variants/rvp11/overridetree.cb

@@ -10,37 +10,37 @@ chip soc/intel/skylake
 	register "PcieRpEnable[5]" = "1"
 	register "PcieRpClkReqSupport[5]" = "1"
 	register "PcieRpClkReqNumber[5]" = "1" #uses SRCCLKREQ1
-	# RP6, uses uses CLK SRC 1
+	# RP6, uses CLK SRC 1
 	register "PcieRpClkSrcNumber[5]" = "1"
 
 	register "PcieRpEnable[6]" = "1"
 	register "PcieRpClkReqSupport[6]" = "1"
 	register "PcieRpClkReqNumber[6]" = "2" #uses SRCCLKREQ2
-	# RP7, uses uses CLK SRC 2
+	# RP7, uses CLK SRC 2
 	register "PcieRpClkSrcNumber[6]" = "2"
 
 	register "PcieRpEnable[7]" = "1"
 	register "PcieRpClkReqSupport[7]" = "1"
 	register "PcieRpClkReqNumber[7]" = "3" #uses SRCCLKREQ3
-	# RP8, uses uses CLK SRC 3
+	# RP8, uses CLK SRC 3
 	register "PcieRpClkSrcNumber[7]" = "3"
 
 	register "PcieRpEnable[8]" = "1"
 	register "PcieRpClkReqSupport[8]" = "1"
 	register "PcieRpClkReqNumber[8]" = "4" #uses SRCCLKREQ4
-	# RP9, uses uses CLK SRC 4
+	# RP9, uses CLK SRC 4
 	register "PcieRpClkSrcNumber[8]" = "4"
 
 	register "PcieRpEnable[13]" = "1"
 	register "PcieRpClkReqSupport[13]" = "1"
 	register "PcieRpClkReqNumber[13]" = "5" #uses SRCCLKREQ5
-	# RP14, uses uses CLK SRC 5
+	# RP14, uses CLK SRC 5
 	register "PcieRpClkSrcNumber[13]" = "5"
 
 	register "PcieRpEnable[16]" = "1"
 	register "PcieRpClkReqSupport[16]" = "1"
 	register "PcieRpClkReqNumber[16]" = "7" #uses SRCCLKREQ7
-	# RP17, uses uses CLK SRC 7
+	# RP17, uses CLK SRC 7
 	register "PcieRpClkSrcNumber[16]" = "7"
 
 	# USB related

src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb

@@ -41,21 +41,21 @@ chip soc/intel/skylake
 	register "PcieRpEnable[0]" = "1"
 	register "PcieRpClkReqSupport[0]" = "1"
 	register "PcieRpClkReqNumber[0]" = "2"
-	# RP1, uses uses CLK SRC 2
+	# RP1, uses CLK SRC 2
 	register "PcieRpClkSrcNumber[0]" = "2"
 
 	# PCIE Port 5 x1 -> SLOT2/LAN
 	register "PcieRpEnable[4]" = "1"
 	register "PcieRpClkReqSupport[4]" = "1"
 	register "PcieRpClkReqNumber[4]" = "3"
-	# RP5, uses uses CLK SRC 3
+	# RP5, uses CLK SRC 3
 	register "PcieRpClkSrcNumber[4]" = "3"
 
 	# PCIE Port 6 x1 -> SLOT3
 	register "PcieRpEnable[5]" = "1"
 	register "PcieRpClkReqSupport[5]" = "1"
 	register "PcieRpClkReqNumber[5]" = "1"
-	# RP6, uses uses CLK SRC 1
+	# RP6, uses CLK SRC 1
 	register "PcieRpClkSrcNumber[5]" = "1"
 
 	# PCIE Port 7 Disabled
@@ -64,14 +64,14 @@ chip soc/intel/skylake
 	register "PcieRpEnable[8]" = "1"
 	register "PcieRpClkReqSupport[8]" = "1"
 	register "PcieRpClkReqNumber[8]" = "5"
-	# RP9, uses uses CLK SRC 5
+	# RP9, uses CLK SRC 5
 	register "PcieRpClkSrcNumber[8]" = "5"
 
 	# PCIE Port 10 x1 -> WiGig
 	register "PcieRpEnable[9]" = "1"
 	register "PcieRpClkReqSupport[9]" = "1"
 	register "PcieRpClkReqNumber[9]" = "4"
-	# RP10, uses uses CLK SRC 4
+	# RP10, uses CLK SRC 4
 	register "PcieRpClkSrcNumber[9]" = "4"
 
 	# USB 2.0 Enable all ports

src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb

@@ -101,15 +101,15 @@ chip soc/intel/skylake
 	register "PcieRpClkReqNumber[5]" = "4"
 	register "PcieRpClkReqNumber[8]" = "1"
 
-	# RP 3 uses uses CLK SRC 5#
+	# RP 3 uses CLK SRC 5#
 	register "PcieRpClkSrcNumber[2]" = "5"
-	# RP 4 uses uses CLK SRC 2#
+	# RP 4 uses CLK SRC 2#
 	register "PcieRpClkSrcNumber[3]" = "2"
-	# RP 5 uses uses CLK SRC 3#
+	# RP 5 uses CLK SRC 3#
 	register "PcieRpClkSrcNumber[4]" = "3"
-	# RP 6 uses uses CLK SRC 4#
+	# RP 6 uses CLK SRC 4#
 	register "PcieRpClkSrcNumber[5]" = "4"
-	# RP 9 uses uses CLK SRC 1#
+	# RP 9 uses CLK SRC 1#
 	register "PcieRpClkSrcNumber[8]" = "1"
 
 	# USB 2.0 Enable all ports

src/mainboard/lenovo/haswell/variants/t440p/devicetree.cb

@@ -41,7 +41,7 @@ chip northbridge/intel/haswell
 			device pci 16.3 off end	# Management Engine KT
 			device pci 19.0 on  end	# Intel Gigabit Ethernet
 			device pci 1a.0 on  end	# USB2 EHCI #2
-			device pci 1b.0 on  end	# High Definition Audio Audio controller
+			device pci 1b.0 on  end	# High Definition Audio controller
 			device pci 1c.0 on  end	# PCIe Port #1, Realtek Card Reader
 			device pci 1c.1 on	# PCIe Port #2, WLAN
 				smbios_slot_desc "0x14" "1" "M.2 2230" "8"

src/mainboard/lenovo/l520/devicetree.cb

@@ -41,7 +41,7 @@ chip northbridge/intel/sandybridge
 			device ref me_kt off end # Management Engine KT
 			device ref gbe off end # Intel Gigabit Ethernet
 			device ref ehci2 on end # USB2 EHCI #2
-			device ref hda on end # High Definition Audio Audio controller
+			device ref hda on end # High Definition Audio controller
 			device ref pcie_rp1 on end # PCIe Port #1
 			device ref pcie_rp2 on end # PCIe Port #2
 			device ref pcie_rp3 on end # PCIe Port #3

src/mainboard/lenovo/s230u/devicetree.cb

@@ -45,7 +45,7 @@ chip northbridge/intel/sandybridge
 			device ref me_kt off end # Management Engine KT
 			device ref gbe off end # Intel Gigabit Ethernet
 			device ref ehci2 on end # USB2 EHCI #2
-			device ref hda on end # High Definition Audio Audio controller
+			device ref hda on end # High Definition Audio controller
 			device ref pcie_rp1 on end # PCIe Port #1
 			device ref pcie_rp2 on end # PCIe Port #2
 			device ref pcie_rp3 off end # PCIe Port #3

src/mainboard/lenovo/t430/devicetree.cb

@@ -43,7 +43,7 @@ chip northbridge/intel/sandybridge
 			device ref me_kt off end # Management Engine KT
 			device ref gbe on end # Intel Gigabit Ethernet
 			device ref ehci2 on end # USB2 EHCI #2
-			device ref hda on end # High Definition Audio Audio controller
+			device ref hda on end # High Definition Audio controller
 			device ref pcie_rp1 on # PCIe Port #1
 				chip drivers/ricoh/rce822 # Ricoh cardreader
 					register "disable_mask" = "0x87"

src/mainboard/lenovo/x131e/devicetree.cb

@@ -55,7 +55,7 @@ chip northbridge/intel/sandybridge
 			device ref me_kt off end # Management Engine KT
 			device ref gbe off end # Intel Gigabit Ethernet
 			device ref ehci2 on end # USB2 EHCI #2
-			device ref hda on end # High Definition Audio Audio controller
+			device ref hda on end # High Definition Audio controller
 			device ref pcie_rp1 on end # PCIe Port #1
 			device ref pcie_rp2 on end # PCIe Port #2 (WLAN card)
 			device ref pcie_rp3 on end # PCIe Port #3 (Card Reader)

src/mainboard/prodrive/atlas/devicetree.cb

@@ -96,7 +96,7 @@ chip soc/intel/alderlake
 	}"
 	register "pcie_clk_config_flag[0]" = "PCIE_CLK_FREE_RUNNING"
 
-	# Enable CPU PCIE RP 1, 2, 3 using using free running CLK (0x80)
+	# Enable CPU PCIE RP 1, 2, 3 using free running CLK (0x80)
 	# Clock source is shared hence marked as free running.
 	register "cpu_pcie_rp[CPU_RP(1)]" = "{
 		.flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_SRC_UNUSED,

src/mainboard/prodrive/hermes/eeprom.c

@@ -16,7 +16,7 @@
 
 /*
  * Check Signature in EEPROM (M24C32-FMN6TP)
- * If signature is there we assume that that the content is valid
+ * If signature is there we assume that the content is valid
  */
 int check_signature(const size_t offset, const uint64_t signature)
 {

src/soc/intel/common/block/cse/cse_lite.c

@@ -1111,7 +1111,7 @@ void cse_fw_sync(void)
 
 	/*
 	 * If system is in recovery mode, CSE Lite update has to be skipped but CSE
-	 * sub-partitions like NPHY and IOM have to to be updated. If CSE sub-parition update
+	 * sub-partitions like NPHY and IOM have to be updated. If CSE sub-parition update
 	 * fails during recovery, just continue to boot.
 	 */
 	if (CONFIG(SOC_INTEL_CSE_SUB_PART_UPDATE) && vboot_recovery_mode_enabled()) {

src/southbridge/amd/pi/hudson/lpc.c

@@ -47,8 +47,8 @@ static void lpc_init(struct device *dev)
 	/* Disable LPC MSI Capability */
 	byte = pci_read_config8(dev, 0x78);
 	byte &= ~(1 << 1);
-	byte &= ~(1 << 0);	/* Keep the old way. i.e., when bus master/DMA cycle is going
-				   on on LPC, it holds PCI grant, so no LPC slave cycle can
+	byte &= ~(1 << 0);	/* Keep the old way. i.e., when bus master/DMA cycle is running
+				   on LPC, it holds PCI grant, so no LPC slave cycle can
 				   interrupt and visit LPC. */
 	pci_write_config8(dev, 0x78, byte);
 

src/vendorcode/eltan/security/mboot/mboot.c

@@ -342,7 +342,7 @@ int __attribute__((weak))mb_measure(int wake_from_s3)
  *
  * mb_measure_log_start
  *
- * performs the measurements defined by the the board routines.
+ * performs the measurements defined by the board routines.
  *
  * The logging is defined by the mb_log_list structure
  *

tests/lib/rtc-test.c

@@ -109,7 +109,7 @@ static void test_mktime(void **state)
 	tm.mon = 2;
 	tm.mday = 29;
 	assert_int_equal(1078062333, rtc_mktime(&tm));
-	/* Ensure that February 29 and March 1 have different different and correct values
+	/* Ensure that February 29 and March 1 have different and correct values
 	   in leap year */
 	tm = (struct rtc_time){
 		.year = 2004, .mon = 3, .mday = 1, .hour = 7, .min = 7, .sec = 17,

util/sconfig/main.c

@@ -317,7 +317,7 @@ static struct chip *get_chip(char *path)
 	sprintf(chip_h, "src/%s", path);
 	if ((stat(chip_h, &st) == -1) && (errno == ENOENT)) {
 		/* root_complex gets away without a separate directory, but
-		 * exists on on pretty much all AMD chipsets.
+		 * exists on pretty much all AMD chipsets.
 		 */
 		if (!strstr(path, "/root_complex")) {
 			fprintf(stderr, "ERROR: Chip component %s does not exist.\n",