- Initial checkin of the freebios2 tree

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@784 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/lib/uart8250.c

@@ -0,0 +1,64 @@
+#ifndef lint
+static char rcsid[] = "$Id$";
+#endif
+
+/* Should support 8250, 16450, 16550, 16550A type uarts */
+#include <arch/io.h>
+#include <uart8250.h>
+
+/* Data */
+#define UART_RBR 0x00
+#define UART_TBR 0x00
+
+/* Control */
+#define UART_IER 0x01
+#define UART_IIR 0x02
+#define UART_FCR 0x02
+#define UART_LCR 0x03
+#define UART_MCR 0x04
+#define UART_DLL 0x00
+#define UART_DLM 0x01
+
+/* Status */
+#define UART_LSR 0x05
+#define UART_MSR 0x06
+#define UART_SCR 0x07
+
+static inline int uart8250_can_tx_byte(unsigned base_port)
+{
+	return inb(base_port + UART_LSR) & 0x20;
+}
+
+static inline void uart8250_wait_to_tx_byte(unsigned base_port)
+{
+	while(!uart8250_can_tx_byte(base_port))
+		;
+}
+
+static inline void uart8250_wait_until_sent(unsigned base_port)
+{
+	while(!(inb(base_port + UART_LSR) & 0x40)) 
+		;
+}
+
+void uart8250_tx_byte(unsigned base_port, unsigned char data)
+{
+	uart8250_wait_to_tx_byte(base_port);
+	outb(data, base_port + UART_TBR);
+	/* Make certain the data clears the fifos */
+	uart8250_wait_until_sent(base_port);
+}
+
+void uart8250_init(unsigned base_port, unsigned divisor, unsigned lcs)
+{
+	lcs &= 0x7f;
+	/* disable interrupts */
+	outb(0x0, base_port + UART_IER);
+	/* enable fifo's */
+	outb(0x01, base_port + UART_FCR);
+	/* Set Baud Rate Divisor to 12 ==> 115200 Baud */
+	outb(0x80 | lcs, base_port + UART_LCR);
+	outb(divisor & 0xFF,   base_port + UART_DLL);
+	outb((divisor >> 8) & 0xFF,    base_port + UART_DLM);
+	outb(lcs, base_port + UART_LCR);
+}