drivers/generic/ioapic: Use arch/x86/ioapic
Change-Id: Ibfaf6693288005463e45831fe100a5052e97cf2f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55185 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
@@ -9,76 +9,12 @@
|
||||
static void ioapic_init(struct device *dev)
|
||||
{
|
||||
struct drivers_generic_ioapic_config *config = dev->chip_info;
|
||||
u32 bsp_lapicid = lapicid();
|
||||
u32 low, high;
|
||||
u32 i, ioapic_interrupts;
|
||||
void *ioapic_base;
|
||||
u8 ioapic_id;
|
||||
|
||||
if (!dev->enabled || !config)
|
||||
return;
|
||||
|
||||
ioapic_base = config->base;
|
||||
ioapic_id = config->apicid;
|
||||
|
||||
printk(BIOS_DEBUG, "IOAPIC: Initializing IOAPIC at %p\n",
|
||||
ioapic_base);
|
||||
printk(BIOS_DEBUG, "IOAPIC: Bootstrap Processor Local APIC = 0x%02x\n",
|
||||
bsp_lapicid);
|
||||
|
||||
if (ioapic_id) {
|
||||
printk(BIOS_DEBUG, "IOAPIC: ID = 0x%02x\n", ioapic_id);
|
||||
/* Set IOAPIC ID if it has been specified. */
|
||||
io_apic_write(ioapic_base, 0x00,
|
||||
(io_apic_read(ioapic_base, 0x00) & 0xf0ffffff) |
|
||||
(ioapic_id << 24));
|
||||
}
|
||||
|
||||
/* Read the available number of interrupts. */
|
||||
ioapic_interrupts = (io_apic_read(ioapic_base, 0x01) >> 16) & 0xff;
|
||||
if (!ioapic_interrupts || ioapic_interrupts == 0xff)
|
||||
ioapic_interrupts = 24;
|
||||
printk(BIOS_DEBUG, "IOAPIC: %d interrupts\n", ioapic_interrupts);
|
||||
|
||||
if (config->irq_on_fsb) {
|
||||
/*
|
||||
* For the Pentium 4 and above APICs deliver their interrupts
|
||||
* on the front side bus, enable that.
|
||||
*/
|
||||
printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on FSB\n");
|
||||
io_apic_write(ioapic_base, 0x03,
|
||||
io_apic_read(ioapic_base, 0x03) | (1 << 0));
|
||||
} else {
|
||||
printk(BIOS_DEBUG, "IOAPIC: Enabling interrupts on APIC serial bus\n");
|
||||
io_apic_write(ioapic_base, 0x03, 0);
|
||||
}
|
||||
|
||||
if (config->enable_virtual_wire) {
|
||||
/* Enable Virtual Wire Mode. */
|
||||
low = INT_ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
|
||||
high = bsp_lapicid << (56 - 32);
|
||||
|
||||
io_apic_write(ioapic_base, 0x10, low);
|
||||
io_apic_write(ioapic_base, 0x11, high);
|
||||
|
||||
if (io_apic_read(ioapic_base, 0x10) == 0xffffffff) {
|
||||
printk(BIOS_WARNING, "IOAPIC not responding.\n");
|
||||
return;
|
||||
}
|
||||
|
||||
printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n", 0,
|
||||
high, low);
|
||||
}
|
||||
low = INT_DISABLED;
|
||||
high = NONE;
|
||||
|
||||
for (i = 1; i < ioapic_interrupts; i++) {
|
||||
io_apic_write(ioapic_base, i * 2 + 0x10, low);
|
||||
io_apic_write(ioapic_base, i * 2 + 0x11, high);
|
||||
|
||||
printk(BIOS_SPEW, "IOAPIC: reg 0x%08x value 0x%08x 0x%08x\n",
|
||||
i, high, low);
|
||||
}
|
||||
setup_ioapic_helper(config->base, config->apicid, config->irq_on_fsb,
|
||||
config->enable_virtual_wire);
|
||||
}
|
||||
|
||||
static void ioapic_read_resources(struct device *dev)
|
||||
|
Reference in New Issue
Block a user