- Minor mod to reset16.inc to work with newer binutils hopefully this works with older ones...
- Update apic.h to include the APIC_TASK_PRI register definition - Update mptable.c to have a reasonable board OEM and productid - Additional testfiles for romcc. - Split out auto.c and early failover.c moving their generic bits elsewere - Enable cache of the rom - Fixes to amd8111_lpc.c so that we successfully setup virtual wire mode on the ioapic git-svn-id: svn://svn.coreboot.org/coreboot/trunk@880 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Eric Biederman
@@ -1,7 +1,43 @@
|
||||
#define MEMORY_512MB 0 /* SuSE Solo configuration */
|
||||
#define MEMORY_1024MB 1 /* LNXI Solo configuration */
|
||||
#define MEMORY_SUSE_SOLO 1 /* SuSE Solo configuration */
|
||||
#define MEMORY_LNXI_SOLO 2 /* LNXI Solo configuration */
|
||||
#define MEMORY_LNXI_HDAMA 3 /* LNXI HDAMA configuration */
|
||||
|
||||
static void sdram_set_registers(void)
|
||||
|
||||
#ifndef MEMORY_CONFIG
|
||||
#define MEMORY_CONFIG MEMORY_SUSE_SOLO
|
||||
#endif
|
||||
|
||||
static void setup_resource_map(const unsigned int *register_values, int max)
|
||||
{
|
||||
int i;
|
||||
print_debug("setting up resource map....\r\n");
|
||||
for(i = 0; i < max; i += 3) {
|
||||
device_t dev;
|
||||
unsigned where;
|
||||
unsigned long reg;
|
||||
#if 0
|
||||
print_debug_hex32(register_values[i]);
|
||||
print_debug(" <-");
|
||||
print_debug_hex32(register_values[i+2]);
|
||||
print_debug("\r\n");
|
||||
#endif
|
||||
dev = register_values[i] & ~0xff;
|
||||
where = register_values[i] & 0xff;
|
||||
reg = pci_read_config32(dev, where);
|
||||
reg &= register_values[i+1];
|
||||
reg |= register_values[i+2];
|
||||
pci_write_config32(dev, where, reg);
|
||||
#if 0
|
||||
reg = pci_read_config32(register_values[i]);
|
||||
reg &= register_values[i+1];
|
||||
reg |= register_values[i+2] & ~register_values[i+1];
|
||||
pci_write_config32(register_values[i], reg);
|
||||
#endif
|
||||
}
|
||||
print_debug("done.\r\n");
|
||||
}
|
||||
|
||||
static void setup_default_resource_map(void)
|
||||
{
|
||||
static const unsigned int register_values[] = {
|
||||
/* Careful set limit registers before base registers which contain the enables */
|
||||
@@ -31,12 +67,7 @@ static void sdram_set_registers(void)
|
||||
* This field defines the upper address bits of a 40 bit address
|
||||
* that define the end of the DRAM region.
|
||||
*/
|
||||
#if MEMORY_1024MB
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
|
||||
#endif
|
||||
#if MEMORY_512MB
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
|
||||
#endif
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
|
||||
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
|
||||
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
|
||||
@@ -74,25 +105,14 @@ static void sdram_set_registers(void)
|
||||
* This field defines the upper address bits of a 40-bit address
|
||||
* that define the start of the DRAM region.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
|
||||
#if MEMORY_1024MB
|
||||
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
|
||||
#endif
|
||||
#if MEMORY_512MB
|
||||
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
|
||||
#endif
|
||||
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
|
||||
|
||||
/* Memory-Mapped I/O Limit i Registers
|
||||
* F1:0x84 i = 0
|
||||
@@ -126,14 +146,14 @@ static void sdram_set_registers(void)
|
||||
* This field defines the upp adddress bits of a 40-bit address that
|
||||
* defines the end of a memory-mapped I/O region n
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
|
||||
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
|
||||
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
|
||||
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
|
||||
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00000000,
|
||||
|
||||
/* Memory-Mapped I/O Base i Registers
|
||||
* F1:0x80 i = 0
|
||||
@@ -161,19 +181,14 @@ static void sdram_set_registers(void)
|
||||
* This field defines the upper address bits of a 40bit address
|
||||
* that defines the start of memory-mapped I/O region i
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
|
||||
#if MEMORY_1024MB
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
|
||||
#endif
|
||||
#if MEMORY_512MB
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
|
||||
#endif
|
||||
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00000000,
|
||||
|
||||
/* PCI I/O Limit i Registers
|
||||
* F1:0xC4 i = 0
|
||||
@@ -200,8 +215,8 @@ static void sdram_set_registers(void)
|
||||
* This field defines the end of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
|
||||
|
||||
@@ -230,8 +245,8 @@ static void sdram_set_registers(void)
|
||||
* This field defines the start of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
|
||||
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
|
||||
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
|
||||
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
|
||||
|
||||
@@ -275,6 +290,350 @@ static void sdram_set_registers(void)
|
||||
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
|
||||
};
|
||||
int max;
|
||||
max = sizeof(register_values)/sizeof(register_values[0]);
|
||||
setup_resource_map(register_values, max);
|
||||
}
|
||||
|
||||
static void sdram_set_registers(void)
|
||||
{
|
||||
static const unsigned int register_values[] = {
|
||||
|
||||
/* Careful set limit registers before base registers which contain the enables */
|
||||
/* DRAM Limit i Registers
|
||||
* F1:0x44 i = 0
|
||||
* F1:0x4C i = 1
|
||||
* F1:0x54 i = 2
|
||||
* F1:0x5C i = 3
|
||||
* F1:0x64 i = 4
|
||||
* F1:0x6C i = 5
|
||||
* F1:0x74 i = 6
|
||||
* F1:0x7C i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 3] Reserved
|
||||
* [10: 8] Interleave select
|
||||
* specifies the values of A[14:12] to use with interleave enable.
|
||||
* [15:11] Reserved
|
||||
* [31:16] DRAM Limit Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40 bit address
|
||||
* that define the end of the DRAM region.
|
||||
*/
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x007f0001,
|
||||
#endif
|
||||
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
|
||||
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
|
||||
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
|
||||
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
|
||||
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
|
||||
/* DRAM Base i Registers
|
||||
* F1:0x40 i = 0
|
||||
* F1:0x48 i = 1
|
||||
* F1:0x50 i = 2
|
||||
* F1:0x58 i = 3
|
||||
* F1:0x60 i = 4
|
||||
* F1:0x68 i = 5
|
||||
* F1:0x70 i = 6
|
||||
* F1:0x78 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 7: 2] Reserved
|
||||
* [10: 8] Interleave Enable
|
||||
* 000 = No interleave
|
||||
* 001 = Interleave on A[12] (2 nodes)
|
||||
* 010 = reserved
|
||||
* 011 = Interleave on A[12] and A[14] (4 nodes)
|
||||
* 100 = reserved
|
||||
* 101 = reserved
|
||||
* 110 = reserved
|
||||
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
|
||||
* [15:11] Reserved
|
||||
* [13:16] DRAM Base Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40-bit address
|
||||
* that define the start of the DRAM region.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
|
||||
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
|
||||
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00800000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00800000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00800000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00800000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00800000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00800000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00800000,
|
||||
#endif
|
||||
|
||||
/* Memory-Mapped I/O Limit i Registers
|
||||
* F1:0x84 i = 0
|
||||
* F1:0x8C i = 1
|
||||
* F1:0x94 i = 2
|
||||
* F1:0x9C i = 3
|
||||
* F1:0xA4 i = 4
|
||||
* F1:0xAC i = 5
|
||||
* F1:0xB4 i = 6
|
||||
* F1:0xBC i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = Reserved
|
||||
* [ 6: 6] Reserved
|
||||
* [ 7: 7] Non-Posted
|
||||
* 0 = CPU writes may be posted
|
||||
* 1 = CPU writes must be non-posted
|
||||
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
|
||||
* This field defines the upp adddress bits of a 40-bit address that
|
||||
* defines the end of a memory-mapped I/O region n
|
||||
*/
|
||||
#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
|
||||
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
|
||||
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
|
||||
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
|
||||
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
|
||||
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00fe2f00,
|
||||
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00fec000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x0000b000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00000000,
|
||||
#endif
|
||||
|
||||
/* Memory-Mapped I/O Base i Registers
|
||||
* F1:0x80 i = 0
|
||||
* F1:0x88 i = 1
|
||||
* F1:0x90 i = 2
|
||||
* F1:0x98 i = 3
|
||||
* F1:0xA0 i = 4
|
||||
* F1:0xA8 i = 5
|
||||
* F1:0xB0 i = 6
|
||||
* F1:0xB8 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Cpu Disable
|
||||
* 0 = Cpu can use this I/O range
|
||||
* 1 = Cpu requests do not use this I/O range
|
||||
* [ 3: 3] Lock
|
||||
* 0 = base/limit registers i are read/write
|
||||
* 1 = base/limit registers i are read-only
|
||||
* [ 7: 4] Reserved
|
||||
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
|
||||
* This field defines the upper address bits of a 40bit address
|
||||
* that defines the start of memory-mapped I/O region i
|
||||
*/
|
||||
#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
|
||||
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00fc0003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00fec00e,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000a03,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00000000,
|
||||
#endif
|
||||
|
||||
/* PCI I/O Limit i Registers
|
||||
* F1:0xC4 i = 0
|
||||
* F1:0xCC i = 1
|
||||
* F1:0xD4 i = 2
|
||||
* F1:0xDC i = 3
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = reserved
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Limit Address i
|
||||
* This field defines the end of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
|
||||
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
|
||||
#endif
|
||||
|
||||
/* PCI I/O Base i Registers
|
||||
* F1:0xC0 i = 0
|
||||
* F1:0xC8 i = 1
|
||||
* F1:0xD0 i = 2
|
||||
* F1:0xD8 i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 3: 2] Reserved
|
||||
* [ 4: 4] VGA Enable
|
||||
* 0 = VGA matches Disabled
|
||||
* 1 = matches all address < 64K and where A[9:0] is in the
|
||||
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
|
||||
* [ 5: 5] ISA Enable
|
||||
* 0 = ISA matches Disabled
|
||||
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
|
||||
* from matching agains this base/limit pair
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Base i
|
||||
* This field defines the start of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
|
||||
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
|
||||
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
|
||||
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
|
||||
#endif
|
||||
|
||||
/* Config Base and Limit i Registers
|
||||
* F1:0xE0 i = 0
|
||||
* F1:0xE4 i = 1
|
||||
* F1:0xE8 i = 2
|
||||
* F1:0xEC i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Device Number Compare Enable
|
||||
* 0 = The ranges are based on bus number
|
||||
* 1 = The ranges are ranges of devices on bus 0
|
||||
* [ 3: 3] Reserved
|
||||
* [ 6: 4] Destination Node
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 7] Reserved
|
||||
* [ 9: 8] Destination Link
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 - Reserved
|
||||
* [15:10] Reserved
|
||||
* [23:16] Bus Number Base i
|
||||
* This field defines the lowest bus number in configuration region i
|
||||
* [31:24] Bus Number Limit i
|
||||
* This field defines the highest bus number in configuration regin i
|
||||
*/
|
||||
#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
|
||||
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
|
||||
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
|
||||
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
|
||||
#endif
|
||||
|
||||
/* DRAM CS Base Address i Registers
|
||||
* F2:0x40 i = 0
|
||||
@@ -298,15 +657,20 @@ static void sdram_set_registers(void)
|
||||
* bits decode 32-MByte blocks of memory.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000001,
|
||||
#if MEMORY_1024MB
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x01000001,
|
||||
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x02000001,
|
||||
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x03000001,
|
||||
#endif
|
||||
#if MEMORY_512MB
|
||||
#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00800001,
|
||||
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x01000001,
|
||||
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x01800001,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00001001,
|
||||
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x00000000,
|
||||
#endif
|
||||
PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000,
|
||||
@@ -331,17 +695,23 @@ static void sdram_set_registers(void)
|
||||
* [31:30] Reserved
|
||||
*
|
||||
*/
|
||||
#if MEMORY_1024MB
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00e0fe00,
|
||||
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00e0fe00,
|
||||
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00e0fe00,
|
||||
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00e0fe00,
|
||||
#endif
|
||||
#if MEMORY_512MB
|
||||
#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x0060fe00,
|
||||
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x0060fe00,
|
||||
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x0060fe00,
|
||||
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x0060fe00,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x03e0ee00,
|
||||
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x03e0ee00,
|
||||
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00000000,
|
||||
#endif
|
||||
PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000,
|
||||
@@ -367,11 +737,14 @@ static void sdram_set_registers(void)
|
||||
* [11:11] Reserved
|
||||
* [31:15]
|
||||
*/
|
||||
#if MEMORY_1024MB
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000033,
|
||||
#endif
|
||||
#if MEMORY_512MB
|
||||
#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000022,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000003,
|
||||
#endif
|
||||
/* DRAM Timing Low Register
|
||||
* F2:0x88
|
||||
@@ -437,7 +810,12 @@ static void sdram_set_registers(void)
|
||||
* 1 = 3 bus clocks
|
||||
* [31:29] Reserved
|
||||
*/
|
||||
#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
|
||||
PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x03623125,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x13723335,
|
||||
#endif
|
||||
/* DRAM Timing High Register
|
||||
* F2:0x8C
|
||||
* [ 0: 0] Twtr (Write to Read Delay)
|
||||
@@ -467,13 +845,15 @@ static void sdram_set_registers(void)
|
||||
* 001 = 2 Mem clocks after CAS# (Registered Dimms)
|
||||
* [31:23] Reserved
|
||||
*/
|
||||
#if MEMORY_1024MB
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000930,
|
||||
#endif
|
||||
#if MEMORY_512MB
|
||||
#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000130,
|
||||
#endif
|
||||
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00100a20,
|
||||
#endif
|
||||
/* DRAM Config Low Register
|
||||
* F2:0x90
|
||||
* [ 0: 0] DLL Disable
|
||||
@@ -544,6 +924,7 @@ static void sdram_set_registers(void)
|
||||
* 111 = Oldest entry in DCQ can be bypassed 7 times
|
||||
* [31:28] Reserved
|
||||
*/
|
||||
#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
|
||||
PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
|
||||
(4 << 25)|(0 << 24)|
|
||||
(0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
|
||||
@@ -551,6 +932,16 @@ static void sdram_set_registers(void)
|
||||
(2 << 14)|(0 << 13)|(0 << 12)|
|
||||
(0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
|
||||
(0 << 3) |(0 << 1) |(0 << 0),
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
|
||||
(4 << 25)|(0 << 24)|
|
||||
(0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
|
||||
(0 << 19)|(0 << 18)|(0 << 17)|(1 << 16)|
|
||||
(2 << 14)|(0 << 13)|(0 << 12)|
|
||||
(0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
|
||||
(0 << 3) |(0 << 1) |(0 << 0),
|
||||
#endif
|
||||
/* DRAM Config High Register
|
||||
* F2:0x94
|
||||
* [ 0: 3] Maximum Asynchronous Latency
|
||||
@@ -615,11 +1006,14 @@ static void sdram_set_registers(void)
|
||||
* 1 = Enabled
|
||||
* [31:30] Reserved
|
||||
*/
|
||||
#if MEMORY_1024MB
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a05,
|
||||
#endif
|
||||
#if MEMORY_512MB
|
||||
#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
|
||||
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a06,
|
||||
#endif
|
||||
#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
|
||||
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x065b0b08,
|
||||
#endif
|
||||
/* DRAM Delay Line Register
|
||||
* F2:0x98
|
||||
|
||||
Reference in New Issue
Block a user